Valley Craft – tagged "over-1000" – Page 2

Valley Craft EZY-Rol 4-Wheel Dual Tapered Tilt Trucks 39" x 68" x 30" $1,047.37

Manufacturer: Valley Craft, Manufacturer Part Number: F85142A54–Wheel Dual Tapered Tilt Truck is constructed of 14–ga. steel with leak–proof solid welds on the seams for long–lasting, dependable service. The running gear consists of two fixed casters reinforced by steel tubing, and two swivel steering casters. Tapered ends allow tilt truck to adapt to virtually any material handling situation, and provide for safe and easy loading and unloading. Hemmed lip around the top edge of the truck provides reinforcement with bulky loads, and steel handles aid in manuevering trucks. Rolls on molded–on wheels. Handles 2000 lbs or .5 cubic yards.SPECIFICATIONS60" x 42" x 73" - 198 lbs.

Valley Craft EZY-Rol 4-Wheel Dual Tapered Tilt Trucks 39" x 68" x 36" $1,100.00

Manufacturer: Valley Craft, Manufacturer Part Number: F85161A14–Wheel Dual Tapered Tilt Truck is constructed of 14–ga. steel with leak–proof solid welds on the seams for long–lasting, dependable service. The running gear consists of two fixed casters reinforced by steel tubing, and two swivel steering casters. Tapered ends allow tilt truck to adapt to virtually any material handling situation, and provide for safe and easy loading and unloading. Hemmed lip around the top edge of the truck provides reinforcement with bulky loads, and steel handles aid in manuevering trucks. Rolls on molded–on wheels. Handles 2000 lbs or .6 cubic yards.SPECIFICATIONS60" x 42" x 73" - 205 lbs.

Valley Craft Industrial Mobile Tech Desk $1,468.42

Manufacturer: Valley Craft, Manufacturer Part Number: F86677Valley Craft’s Industrial Mobile Tech Desk is the perfect way to improve organization and efficiency in your mobile workspace. Compatible with computer and other electronic accessories powered by the built-in power strip. The ability to stand and move your desk from station to station as needed makes organization on-the-go simple. The industrial option is ideal for limited storage and organization or regular on-the-go maneuvering. The lightweight design makes moving your desk simple, rolling on (4) 3” non-marking rubber swivel casters, with a 400 lb. overall capacity. Unit has 1 lockable drawer and 1 lower full width shelf. The top surface has an ergonomic back-to-front top slope with front retaining lip to help keep pens and papers from sliding off. Additional top storage is comprised of two side-by-side open compartments (11”W x 6”D x 4”H). Drawer capacity is 100 lbs. Valley Craft’s Mobile Tech Desks are constructed of heavy 16 gauge steel, continuous solid welds, and a premium powder coat paint finish in gray. Products are shipped fully assembled, ready-to-use, and made in the U.S.A.

Valley Craft Mini Pallet Truck - Aluminum, Shoe 11", Tires Pneumatic w/ Brake $1,205.26

Manufacturer: Valley Craft, Manufacturer Part Number: F84876A0EZY–Tilt Aluminum Pallet Trucks are constructed of 15/16", spark–resistant tubing. Aluminum is recommended for services when the truck must be transported, and for use around corrosive materials. Steel, double–forked shoe locks into position automatically, and is easily released by tripping a foot lever. Forks are available in two standard lengths. 1" steel axle is encased in a protective housing. Equipped with hand brakes for added safety. Shoes measures 11.5". Truck rolls easily on fully pneumatic tires. 1000–lb. capacity.SPECIFICATIONS28" x 25" x 54" - 64 lbs.

Valley Craft Mini Pallet Truck - Aluminum, Shoe 13.75", Tires Pneumatic w/ Brake $1,205.26

Manufacturer: Valley Craft, Manufacturer Part Number: F84877A9EZY–Tilt Aluminum Pallet Trucks are constructed of 15/16", spark–resistant tubing. Aluminum is recommended for services when the truck must be transported, and for use around corrosive materials. Steel, double–forked shoe locks into position automatically, and is easily released by tripping a foot lever. Forks are available in two standard lengths. 1" steel axle is encased in a protective housing. Equipped with hand brakes for added safety. Shoes measures 14.5". Truck rolls easily on fully pneumatic tires. 1000–lb. capacity.SPECIFICATIONS28" x 25" x 54" - 66 lbs.

Valley Craft Mini Pallet Truck -Steel, Shoe 11", Tires Pneumatic w/ Brake $1,152.63

Manufacturer: Valley Craft, Manufacturer Part Number: F84878A8EZY–Tilt Steel Pallet Trucks are constructed of rugged 14–gauge, 11/8" O.D. steel tubing with form–fitted joints and solid welds, with reinforcement intentionally placed at the points of greatest stress. Steel, double–forked shoe locks into position automatically and is easily released by tripping a foot lever. 1" steel axle is encased in a protective housing. Equipped with hand brakes. Shoes measure 11.5". Truck rolls easily on fully pneumatic tires.1000–lb. capacity.SPECIFICATIONS28" x 25" x 54" - 82 lbs.

Valley Craft Mini Pallet Truck -Steel, Shoe 13.75", Tires Pneumatic w/ Brake $1,152.63

Manufacturer: Valley Craft, Manufacturer Part Number: F84879A7EZY–Tilt Steel Pallet Trucks are constructed of rugged 14–gauge, 11/8" O.D. steel tubing with form–fitted joints and solid welds, with reinforcement intentionally placed at the points of greatest stress. Steel, double–forked shoe locks into position automatically and is easily released by tripping a foot lever. 1" steel axle is encased in a protective housing. Equipped with hand brakes. Shoes measure 14.5". Truck rolls easily on fully pneumatic tires.1000–lb. capacity.SPECIFICATIONS28" x 25" x 54" - 84 lbs.

Valley Craft ProVault Jobsite Tool Box $1,001.32

Manufacturer: Valley Craft, Manufacturer Part Number: F83274A0Valley Craft’s ProVault Jobsite Box is the perfect solution for organizing any worksite. This 18 cu. ft. standalone storage chest maximizes space, improves cleanliness, and enhances security. An upper support rail system along the interior perimeter accommodates shelves and trays for smaller items. Use with steel accessory trays (sold separately) or with your own materials. Commonly used with jobsite plywood to create custom shelves horizontally or vertically. Equipped with handles on both sides, the jobsite box can be easily moved by hand or transported using the 4-way forklift design with built-in fork pockets. For overhead lifting, simply attach hoist straps of chains to the outside divider sections of the welded side handles. (2) Recessed padlock enclosures provide maximum security and deter theft (compatible with Master Lock # 5 or equivalent). A premium full-length piano hinge ensures stability, durability, and long life. A rear rubber grommet offers power cord access, allowing tools to be charged while keeping the chest securely closed. The lid features (2) support struts: (1) gas-assisted for effortless lifting, and (1) mechanical to hold the lid open as needed. Optional accessories include vertical-length trays, horizontal-length trays, and casters. Vertical trays adjust left or right on the interior support rails for items like screws, tape measures, and clipboards. Horizontal trays adjust front to back and are perfect for battery charging stations, gloves, and other supplies. Optional caster pack includes (4) swivel-locking casters that install utilizing the predrilled mounting holes for even easier mobility. Valley Craft’s ProVault Jobsite Box is constructed of heavy duty 16-gauge steel, fully welded, and finished with a premium powder coat in gray. Products are shipped fully assembled, ready-to-use, and are proudly made in the U.S.A.

Valley Craft Roto-Grip - Counterweighted 48" x 40" x 83" $13,841.03

Manufacturer: Valley Craft, Manufacturer Part Number: F88587C1Roto–Grip counterweighted portable lift lifts and rotates steel drums and cylinders 18–24" with electric clamping jaws. Unit is manually propelled and features an electric–over–hydraulic control system. Counterweighted model butts directly up against pallets for effective loading and unloading. Electric screwjack clamps and releases the rubber–lined jaws, while the hydraulic rotator turns drums 360 degrees. Single mast design allows for high visibility. 800–lb. capacity. Optional floor lock available. Maximum lift travel is 61" at 17 feet–per–min. Turns 61.25". Electric–over–hydraulic control system requires 12–volt deep cycle battery and plugs into a standard grounded outlet. For steel cylinders only. Note: Batteries are included.SPECIFICATIONS48" x 40" x 83" - 1208 lbs.

Valley Craft Roto-Grip - Counterweighted 48" x 40" x 95" $14,353.85

Manufacturer: Valley Craft, Manufacturer Part Number: F88588C0Roto–Grip counterweighted portable lift lifts and rotates steel drums and cylinders 18–24" with electric clamping jaws. Unit is manually propelled and features an electric–over–hydraulic control system. Counterweighted model butts directly up against pallets for effective loading and unloading. Electric screwjack clamps and releases the rubber–lined jaws, while the hydraulic rotator turns drums 360 degrees. Single mast design allows for high visibility. 800–lb. capacity. Optional floor lock available. Maximum lift travel is 71" at 17 feet–per–min. Turns 64.25". Electric–over–hydraulic control system requires 12–volt deep cycle battery and plugs into a standard grounded outlet. For steel cylinders only. Note: Batteries are included.SPECIFICATIONS48" x 40" x 95" - 1273 lbs.

Valley Craft Roto-Grip 45.5" x 31.5" x 81.5" $12,148.72

Manufacturer: Valley Craft, Manufacturer Part Number: F88585C3Roto–Grip portable lift lifts and rotates steel drums and cylinders 18–24" with electric clamping jaws. Unit is manually propelled and features an electric–over–hydraulic control system. Electric screwjack clamps and releases the rubber–lined jaws, while the hydraulic rotator turns drums 360 degrees. Single mast design allows for high visibility. 800–lb. capacity. Optional floor lock available. Maximum lift travel is 61" at 17 feet–per–min. Turns 44". Electric–over–hydraulic control system requires 12–volt deep cycle battery and plugs into a standard grounded outlet. For steel cylinders only. Note: Batteries are included.SPECIFICATIONS45.5" x 31.5" x 81.5" - 621 lbs.

Valley Craft Roto-Grip 48" x 40" x 95" $12,712.82

Manufacturer: Valley Craft, Manufacturer Part Number: F88586C2Roto–Grip portable lift lifts and rotates steel drums and cylinders 18–24" with electric clamping jaws. Unit is manually propelled and features an electric–over–hydraulic control system. Electric screwjack clamps and releases the rubber–lined jaws, while the hydraulic rotator turns drums 360 degrees. Single mast design allows for high visibility. 800–lb. capacity. Optional floor lock available. Maximum lift travel is 71" at 17 feet–per–min. Turns 44". Electric–over–hydraulic control system requires 12–volt deep cycle battery and plugs into a standard grounded outlet. For steel cylinders only. Note: Batteries are included.SPECIFICATIONS48" x 40" x 95" - 702 lbs.

Valley Craft Roto-Lift - Counterweighted Battery Powered 48" x 40" x 83" $9,943.59

Manufacturer: Valley Craft, Manufacturer Part Number: F88569C3Roto–Lift Counterweighted rotating drum handler is a manually–propelled unit that butts up directly against pallets to make loading and unloading safe and effective. Lifts and rotates 360degrees as a battery–powered handler. Battery–powered model requires 12–volt deep cycle battery and plugs into a standard grounded outlet (battery included). Optional floor lock available. Unit handles steel, plastic & fiber cylinders 14" – 24". Turns 61.25", and has a maximum lift height of 61" at 17 feet–per–min. Comes with (34) 13.5–lb. counter–weights, requires more effort to move. 750–lb. capacity.SPECIFICATIONS48" x 40" x 83" - 1138 lbs.

Valley Craft Roto-Lift - Counterweighted Battery Powered 48" x 40" x 95" $10,507.69

Manufacturer: Valley Craft, Manufacturer Part Number: F88570C0Roto–Lift Counterweighted rotating drum handler is a manually–propelled that butts up directly against pallets to make loading and unloading safe and effective. Lifts and rotates 360degrees as a battery–powered handler. Battery–powered model requires 12–volt deep cycle battery and plugs into a standard grounded outlet (battery included). Optional floor lock available. Unit handles steel, plastic & fiber cylinders 14" – 24". Turns 61.25", and has a maximum lift height of 71" at 17 feet–per–min. Comes with (34) 13.5–lb. counter–weights, requires more effort to move. 750–lb. capacity.SPECIFICATIONS48" x 40" x 95" - 1156 lbs.

Valley Craft Roto-Lift - Counterweighted Manual Power 48" x 40" x 83" $9,379.49

Manufacturer: Valley Craft, Manufacturer Part Number: F88580B8Roto–Lift Counterweighted rotating drum handler is a manually–propelled unit that butts up directly against pallets to make loading and unloading safe and effective. Lifts and rotates 360degrees as a manually–powered handler. Optional floor lock available. Unit handles steel, plastic & fiber cylinders 14" – 24". Turns 61.25", and has a maximum lift height of 61" at 5 feet–per–min. Comes with (34) 13.5–lb. counter–weights, requires more effort to move. 750–lb. capacity.SPECIFICATIONS48" x 40" x 83" - 1040 lbs.

Valley Craft Roto-Lift - Counterweighted Manual Power 48" x 40" x 95" $9,943.59

Manufacturer: Valley Craft, Manufacturer Part Number: F88581B7Roto–Lift Counterweighted rotating drum handler is a manually–propelled unit that butts up directly against pallets to make loading and unloading safe and effective. Lifts and rotates 360degrees as a manually–powered handler. Optional floor lock available. Unit handles steel, plastic & fiber cylinders 14" – 24". Turns 61.25", and has a maximum lift height of 71" at 5 feet–per–min. Comes with (34) 13.5–lb. counter–weights, requires more effort to move. 750–lb. capacity.SPECIFICATIONS48" x 40" x 95" - 1047 lbs.

Valley Craft Roto-Lift - Straddle A/C Powered 40" x 60" x 96" $8,815.38

Manufacturer: Valley Craft, Manufacturer Part Number: F87787B1Roto–Lift rotating drum handler is a manually–propelled, straddle–type unit that centers the load between the wheels for maximum balance and safety. Lifts and rotates 360degrees as an AC–powered handler. Optional floor lock available. Unit handles steel, plastic & fiber cylinders 14" – 24". Turns 44", and has a maximum lift height of 71" at 17 feet–per–min. 800–lb. capacity.SPECIFICATIONS40" x 60" x 96" - 510 lbs.

Valley Craft Roto-Lift - Straddle Air Power, Lift Height of 61" at 17' $8,251.28

Manufacturer: Valley Craft, Manufacturer Part Number: F88589B9Roto–Lift rotating drum handler is a manually–propelled, straddle–type unit that centers the load between the wheels for maximum balance and safety. Lifts and rotates 360degrees as an air–powered handler. Air–powered models require an outside air source and is ideal for spark–resistant applications and requires outside air source. Optional floor lock available. Unit handles steel, plastic & fiber cylinders 14" – 24". Turns 44", and has a maximum lift height of 61" at 17 feet–per–min. 800–lb. capacity.SPECIFICATIONS40" x 60" x 96" - 488 lbs.

Valley Craft Roto-Lift - Straddle Air Power, Lift Height of 71" at 17' $8,815.38

Manufacturer: Valley Craft, Manufacturer Part Number: F88590B6Roto–Lift rotating drum handler is a manually–propelled, straddle–type unit that centers the load between the wheels for maximum balance and safety. Lifts and rotates 360degrees as an air–powered handler. Air–powered models require an outside air source and is ideal for spark–resistant applications and requires outside air source. Optional floor lock available. Unit handles steel, plastic & fiber cylinders 14" – 24". Turns 44", and has a maximum lift height of 71" at 17 feet–per–min. 800–lb. capacity.SPECIFICATIONS40" x 60" x 96" - 508 lbs.

Valley Craft Roto-Lift - Straddle Battery Power 40" x 60" x 84" $8,251.28

Manufacturer: Valley Craft, Manufacturer Part Number: F88565C7Roto–Lift rotating drum handler is a manually–propelled, straddle–type unit that centers the load between the wheels for maximum balance and safety. Lifts and rotates 360degrees as a battery–powered handler. Battery–powered model requires 12–volt deep cycle battery and plugs into a standard grounded outlet (battery included). Optional floor lock available. Unit handles steel, plastic & fiber cylinders 14" – 24". Turns 44", and has a maximum lift height of 61" at 17 feet–per–min. 800–lb. capacity.SPECIFICATIONS40" x 60" x 84" - 568 lbs.

Valley Craft Roto-Lift - Straddle Battery Power 40" x 60" x 96" $8,815.38

Manufacturer: Valley Craft, Manufacturer Part Number: F88566C6Roto–Lift rotating drum handler is a manually–propelled, straddle–type unit that centers the load between the wheels for maximum balance and safety. Lifts and rotates 360degrees as a battery–powered handler. Battery–powered model requires 12–volt deep cycle battery and plugs into a standard grounded outlet (battery included). Optional floor lock available. Unit handles steel, plastic & fiber cylinders 14" – 24". Turns 44", and has a maximum lift height of 71" at 17 feet–per–min. 800–lb. capacity.SPECIFICATIONS40" x 60" x 96" - 630 lbs.

Valley Craft Roto-Lift - Straddle Manual Power 40" x 60" x 84" $7,787.01

Manufacturer: Valley Craft, Manufacturer Part Number: F88563B9Roto–Lift rotating drum handler is a manually–propelled, straddle–type unit that centers the load between the wheels for maximum balance and safety. Lifts and rotates 360degrees as a manual–powered handler. Optional floor lock available. Unit handles steel, plastic & fiber cylinders 14" – 24". Turns 44", and has a maximum lift height of 61" at 5 feet–per–min. 800–lb. capacity.SPECIFICATIONS40" x 60" x 84" - 457 lbs.

Valley Craft Roto-Lift - Straddle Manual Power 40" x 60" x 96" $8,251.28

Manufacturer: Valley Craft, Manufacturer Part Number: F88564B8Roto–Lift rotating drum handler is a manually–propelled, straddle–type unit that centers the load between the wheels for maximum balance and safety. Lifts and rotates 360degrees as a manual–powered handler. Optional floor lock available. Unit handles steel, plastic & fiber cylinders 14" – 24". Turns 44", and has a maximum lift height of 71" at 5 feet–per–min. 800–lb. capacity.SPECIFICATIONS40" x 60" x 96" - 501 lbs.

Valley Craft Roto-Lift Drum Handler 78" x 30" x 42.25" $8,251.28

Manufacturer: Valley Craft, Manufacturer Part Number: 8565RAISE, ROTATE AND LOWER – all at the touch of a button. Roto–Lift® comes equipped with push handles and casters for easy maneuverability. Compact design with battery powered hydraulic system. Nylon straps adjust to fit any drum. Power pack buttons allow safe one–touch lifting and rotating. Drums can rotate 360° to the left or right allowing draining at any angle. Uses a standard 12–volt battery (not included). Built–in charger plugs into any 110–volt grounded outlet. 61" Lifting Height Rotates a full 360° either direction Works with any drum Perfect for draining and stacking SPECIFICATIONS800 lbs. Load Bearing Capacity - 513 lbs.1 handler78" H x 30" W x 42.25" L

Find anything you need