Aerosol Can Disposal

Manufacturer: Justrite, Manufacturer Part Number: 28157This is a REPLACEMENT CARBON FILTER 3 PACK.

Manufacturer: Vestil, Manufacturer Part Number: CAN-RECYDrum Bung Diameter (in.): 2, Drum Size (gallon): 30 or 55, Maximum Can Height (in.): 14–5/8, Maximum Can Diameter (in.): 3, Carbon Filter: Two Piece – Turn aerosol cans into scrap metal, using the Aerosol Can Puncturing System, exempting them from disposal regulations for hazardous waste. This aerosol can puncturing device safely punctures aerosol cans to relieve pressure, and then empties any residual contents into your drum. Thread the recycler body into the threaded bung of your drum. Push the lever to puncture the can, and two piece filter with a carbon cartridge drains out odors and harmful emissions. Unit includes puncturing device, safety goggles, carbon filter, and anti–static wire, which prevents static buildup by grounding the drum as required by OSHA.

Manufacturer: Vestil, Manufacturer Part Number: CAN-RECY-DLXThe Aerosol Can Crusher uses air bag technology and is 100% air operated with 15 tons of crushing force, enough to shatter the mixing ball. Crushes 2 aerosol cans by 98%. Equipped with a timer and filter regulator gauge, the crusher has a cycle time of 25-60 seconds and requires air input of 120 psi. An outlet valve allows for draining and capturing liquid. Activated carbon filter absorbs contaminants and odors and a fume extractor directs gases outside of area. Greatly reduces disposal costs. MFG Part# CAN-RECY-DLX

Manufacturer: Aerosolv, Manufacturer Part Number: 28100 Aerosolv ® 360 Aerosol Can Recycling System Safe, easy way to transform aerosol cans into recyclable steel — minimize waste and reduce disposal costs Enclosed system - dual seal chamber eliminates the potential for content spray back, prevents VOC release and reduces gunk build up High-efficiency combination coalescing carbon filter captures odors, and prevents potentially harmful VOCs from being released into the air - extended filter life reduces change outs to save time and money Alignment cone and two-way pressure controlled, non-sparking vent pin offers the most efficient point of puncture - greatly reduces cleanup and minimizes maintenance Intuitive, ergonomic activation wheel design is easy to use, and with no lever handle extending over the side of the drum, removes the chance for snagged clothing or tipped drums Ideal for high volume applications, the Aerosolv 360 system safely converts spent aerosol cans from solid hazardous waste to a non-hazardous, recyclable material. Threading directly into a standard 2-in (51-mm) bung on a 30- (110-liter) or 55-gallon (200-liter) drum, the housing accommodates a wide variety of the most common sized cans, including domed mini, standard, and jumbo. Sleek design with no protruding lever handle - mechanical activation wheel with rack and pinion gear increases torque making can processing easy and fast. Integrated lock out system prevents unauthorized use and tamper-proof retention plate secures the unit to the drum. Non-sparking puncture pin pierces the can and directs the liquid flow straight into the drum for a quick, controlled evacuation. Special non-stick coating on housing minimizes static transfer to the unit while at the same time reduces clean up. Attach the two-stage high-efficiency combination filter to the 3/4-in (19-mm) bung to capture VOCs from any remaining propellants. Replaceable, proprietary polymer coalescer in filter base captures the residual liquid in the gas before it reaches the activated carbon, helping extend the life of the filter. The top activated carbon filter cartridge features adsorption indicator which reacts to the adsorption of VOCs to indicate when the filter cartridge is ready for replacement. Built-in counter tracks system use for maintenance. System also includes safety goggles and an anti-static ground wire with alligator clip. One 55-gallon (200-liter) drum holds approximately 4,000 spent aerosol cans. Punctured, discharged, cans do not meet the definition of hazardous waste per EPA 40 CFR 261.23(a)(6), and thus can be treated as recyclable scrap metal. EPA compliant. SPECIFICATIONS12 lbs.1 Aerosolv 360 System

Manufacturer: Justrite, Aerosolv, Manufacturer Part Number: 28231SAFE, CONVENIENT AND COMPLIANT! Same benefits of original Aerosolv® Super System including a poly containment sump pan for under drainage drum, padlock w/key, combination coalescing/colormetric carbon filter w/check valve, anti-static ground wire w/C-clamp and safety goggles.. The Aerosolv® 7000 XL Dual-Compliant aerosol can recycling system safely and efficiently disposes of aerosol cans while complying with the California Universal Waste Rule. The Aerosolv 7000XL System includes all the great features of the Aerosolv 7000 Super Aerosol Can Recycling System plus a shut-off valve in the puncturing unit and a check valve in the carbon cartridge to prevent off-gassing. A poly lid cover and a poly containment sump help you stay compliant whether you are accumulating or transporting processed aerosol cans for scrap. The unit also includes an Aerosolv 7163 combination coalescing colormetric carbon filter, a padlock with key, anti-static ground wire with C-clamp, and safety goggles. The Combination Coalescing/Carbon Filter threads into the ¾" bung and is comprised of two parts. The lower Coalescing portion removes airborne liquid while the replaceable, upper Activated Carbon portion adsorbs hydrocarbons and odor. A variety of replacement filters and parts are also available. SPECIFICATIONS25 lbs.1 aerosolv dual compliant system

Manufacturer: Aerosolv, Manufacturer Part Number: 28200Works with both the Aerosolv® Standard and Aerosolv® Super Systems. Includes one carbide tip puncture pin with O–ring, one red silicone gasket, one stainless steel spring, three bridge pins and one tube of lithium grease.SPECIFICATIONS11 lbs.1 repair kit

Manufacturer: Aerosolv, Manufacturer Part Number: 28198Works with both the Aerosolv® Standard and Aerosolv® Super Systems.SPECIFICATIONS4 lbs.2 carbon cartridges5" W x 6" H

Manufacturer: Aerosolv, Manufacturer Part Number: 28223Works with both the Aerosolv® Standard and Aerosolv® Super Systems.SPECIFICATIONS3 lbs.2 color changing carbon cartridges6.25" H x 5.75" Dia.

Manufacturer: Aerosolv, Manufacturer Part Number: 28224Works with both the Aerosolv® Standard and Aerosolv® Super Systems.SPECIFICATIONS3 lbs.1 color changing combination coalescing/carbon filter15" H x 5.75" Dia.

Manufacturer: Aerosolv, Manufacturer Part Number: 28197Works with both the Aerosolv® Standard and Aerosolv® Super Systems.SPECIFICATIONS3 lbs.1 combination coalescing/carbon filter5" W x 15" H

Manufacturer: Aerosolv, Manufacturer Part Number: 28202SAFE, CONVENIENT AND COMPLIANT! Safe, convenient, and compliant, Aerosolv® provides an easy–to–use, effective method of relieving pressure in spent aerosol cans, changing them from solid hazardous waste to a non–hazardous, fully recyclable state. This eliminates the expense of solid waste disposal of aerosol cans. The contents of over 4,000 spent aerosols may be collected in one 55–gallon drum. The puncturing unit, which depressurizes empty aerosol cans, is made of low maintenance aircraft aluminum and threads onto the 2" bung of a standard 55–gallon drum. All moving parts are 308 stainless steel. It accepts series 200, 300 and 6 oz. cans. No power source is needed. Simply insert inverted can, tighten sliding plate to engage, and press handle to pierce a smooth–edged hole into the dome of the can. Carbide–tipped piercing pin withstands repeated use, with no visible wear signs after puncturing 10,000 aerosol cans. The Combination Coalescing/Carbon Filter threads into the ¾" bung and is comprised of two parts. The lower Coalescing portion removes airborne liquid while the replaceable, upper Activated Carbon portion adsorbs hydrocarbons and odor. REPLACEMENT FILTERS AND PARTS ARE AVAILABLE FOR ALL AEROSOLV® SYSTEMS. SPECIFICATIONS10 lbs.1 aerosolv standard system

Manufacturer: Vestil, Manufacturer Part Number: CAN-R-FLTThis replacement filter is for the Aerosol Can Recycle System.

Manufacturer: Justrite, Manufacturer Part Number: 28228This is a COMBO COALESCING/COLOR CARBON.

Manufacturer: Justrite, Manufacturer Part Number: 28218Aerosolv is the safe and economical way to dispose of aerosol cans. Safe, convenient and compliant, Aerosolv provides an easy–to–use, effective method of relieving pressure in spent aerosol cans. It changes them from solid hazardous waste to a non–hazardous, fully–recyclable state. This eliminates the expense of solid waste disposal of aerosol cans. Every 100 cans punctured and emptied by Aerosolv increases recyclable scrap metal by 25 lb. and reduces solid waste by 10 cubic feet, making Aerosolv extremely cost–effective. As an added benefit, residual liquids may be eligible for reclamation or recycling, resulting in "waste–minimization credits". The contents of over 4,000 spent aerosols may be collected in just one 55–gallon drum.

Manufacturer: Justrite, Manufacturer Part Number: 28161This is a CARBON FILTER KIT W/ POLY FITTING.

Manufacturer: Justrite, Manufacturer Part Number: 28162This is a CARBON FILTER KIT W/ SS FITTING.

Manufacturer: Justrite, Manufacturer Part Number: 28216Aerosolv is the safe and economical way to dispose of aerosol cans. Safe, convenient and compliant, Aerosolv provides an easy–to–use, effective method of relieving pressure in spent aerosol cans. It changes them from solid hazardous waste to a non–hazardous, fully–recyclable state. This eliminates the expense of solid waste disposal of aerosol cans. Every 100 cans punctured and emptied by Aerosolv increases recyclable scrap metal by 25 lb. and reduces solid waste by 10 cubic feet, making Aerosolv extremely cost–effective. As an added benefit, residual liquids may be eligible for reclamation or recycling, resulting in "waste–minimization credits". The contents of over 4,000 spent aerosols may be collected in just one 55–gallon drum.

Manufacturer: Vestil, Manufacturer Part Number: CAN-CAP-PCollecting aluminum cans or plastic bottles could not be easier with this Recycling Lid. Fits plastic or steel fifty-five (55) gallon drums. Molded of blue (recycling) dent proof polyethylene for rust resistance and easy cleaning. Recycling lid fits snug to the drum to resist blowing off in outdoor environments or being tampered with by people or animals. MFG Part# CAN-CAP-P

Manufacturer: Justrite, Manufacturer Part Number: 28229This is a COLRMETRIC CARBON FILTER REPLACEMENT.

Manufacturer: Justrite, Manufacturer Part Number: 28111Aerosolv is the safe and economical way to dispose of aerosol cans. Safe, convenient and compliant, Aerosolv provides an easy–to–use, effective method of relieving pressure in spent aerosol cans. It changes them from solid hazardous waste to a non–hazardous, fully–recyclable state. This eliminates the expense of solid waste disposal of aerosol cans. Every 100 cans punctured and emptied by Aerosolv increases recyclable scrap metal by 25 lb. and reduces solid waste by 10 cubic feet, making Aerosolv extremely cost–effective. As an added benefit, residual liquids may be eligible for reclamation or recycling, resulting in "waste–minimization credits". The contents of over 4,000 spent aerosols may be collected in just one 55–gallon drum.