Drum Lifters, Movers and Dispensers

Manufacturer: Little Giant, Manufacturer Part Number: PDFS-4848-6PHAll-welded pallet dolly with raised 30" deck height to lessen bending and back strain. Available with an open deck or solid 12 gauge steel deck. 6" swivel casters with phenolic wheels and 2 floor locks to stop unwanted movement during loading and unloading. All-welded construction with durable gray powder coated finish.

Manufacturer: Morse, Manufacturer Part Number: 55-P

Manufacturer: Morse, Manufacturer Part Number: 217-P

Manufacturer: Morse, Manufacturer Part Number: 213-P

Manufacturer: Morse, Manufacturer Part Number: 297-P

Manufacturer: Morse, Manufacturer Part Number: 301-P

Manufacturer: Morse, Manufacturer Part Number: 1875-P

Manufacturer: Morse, Manufacturer Part Number: 305-P

Manufacturer: Wesco, Manufacturer Part Number: 261097

Manufacturer: Morse, Manufacturer Part Number: 291-P

Manufacturer: Morse, Manufacturer Part Number: 292-P

Manufacturer: Morse, Manufacturer Part Number: 86BelowHook Drum Lifter to lift and move a drum in upright position with your hoist or crane. Your drum is supported by a bar at the bottom and secured in the drum holder with a chain around the drum. Capacity: 1,000 Lb. Each Model 86 VertiKarrier is load tested and factory certified at 125% of rated capacity as per ANSI B30.20.SPECIFICATIONS28" x 18" x 29" - 61 lbs.

Manufacturer: Morse, Manufacturer Part Number: 299-2P

Manufacturer: Morse, Manufacturer Part Number: 152The economical Morse model 152 Drum Truck is easy to use. Simply place the drum truck upright along side your drum, engage the upper rim hook, and tip back to load. Move your heavy drum on two 10" rubber mold–on wheels. Capacity: 1000 Lb. Handle your 55–gallon steel, plastic or fiber drum with upper rim, a 30–gallon drum at least 30" tall, or an 85–gallon "salvage drum".SPECIFICATIONS26" x 13" x 41" - 42 lbs.

Manufacturer: Enpac, Manufacturer Part Number: SC-5300-0001The common dolly has been rattling around industrial plants for 200 years virtually unchanged in design and function. It's been a good tool, but not efficient enough for handling today's hazardous materials. Poly–Dolly, the multi–functional, two–wheel dispensing station takes the dolly out of the Industrial Revolution and into the 21st Century. With Poly–Dolly, mobile dispensing of hazardous liquids is no longer a cumbersome, risky business. It transports 55–gallon drums with ease, tilts to become an efficient self–dispensing station, and acts as its own secondary containment unit. By reducing unnecessary and dangerous drum handling, Poly–Dolly protects workers and improves efficiency – two big items in improving profits. Made of long–lasting, tough polyethylene, Poly–Dolly is strong enough to withstand daily bumps and scuffs, and will not rust or corrode. That is why companies are saying: "Goodbye dolly. Hello Poly–Dolly." Holds up to 600 lbs. to cover most applications Drain hole into sump area is elevated 1 1/2" above dispensing well for major spills Tough polyethylene construction, cannot rust or corrode Easily rolls through 36" doorways Integrally–molded handles for extra strength Lightweight, only 92 lbs. Rolled–grip handle makes lifting easy Large 80–gallon sump capacity (exceeds EPA 40 CFR 264.175) Forkliftable from rear Extra–large, easy–roll 10" polyolefin wheels Recessed strap ring won't break off Drain plug simplifies removal of contents from sump Transports and dispenses 55–gallon drums⚠ WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.SPECIFICATIONS600 lbs. Load Bearing Capacity, 80 gal. Sump Capacity - 92 lbs.1 dolly69" L x 32" W x 27" H

Manufacturer: Enpac, Manufacturer Part Number: 6005-BKThe Poly–Dolly Well Liner provides extra spill protection. To reclaim spilled material, just lift up the liner...no cleaning, wiping or scrubbing.⚠ WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.SPECIFICATIONS1 lbs.1 liner19.5" L x 16.75" W x 2.75" H

Manufacturer: Enpac, Manufacturer Part Number: 5311-BKPOLY–DOLLY CONVERSION KIT. Sold separately, the Conversion Kit comes complete with pneumatic rubber wheels and washers. Everything you need to convert the Poly–Dolly into an ATD in just a few simple steps.⚠ WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer: Morse, Manufacturer Part Number: GEK1300E1115KIT, ENCLOSURE W/ SAFETY INTERLOCK, FOR 1–300–E1–115, FIELD INSTALL, SHIPS SEPARATELY W/ 2ND FREIGHT BILL

Manufacturer: Vestil, Manufacturer Part Number: DCC-2896-4Description: Steel, Size (W x L x H): 28" x 96" x 29", Capacity: 4000 lbs., Caster Size: 6" x 2" – Heavy Duty Cradle Carts – Move and store pipe, channel, bar stock, barrels, or drums with these Heavy–Duty Cradle Carts. A large open design that makes loading and unloading by fork trucks and slings easy. All welded construction. Wheels are mounted in a diamond pattern to allow the truck to tilt when going over thresholds and turn about on its own center. Lightweight Aluminum Cradle Cart fits all small to medium loads and rolls on (4) swivel 3" x 1" poly casters. The 4,000 pound Steel Cradle Carts rolls on (2) rigid and (2) swivel phenolic casters. The 10,000 pound units roll on 4–way swivel lock cast steel wheels. Powder coat finish standard on steel cart.

Manufacturer: Vestil, Manufacturer Part Number: DCC-2860-4Description: Steel, Size (W x L x H): 28" x 60" x 29", Capacity: 4000 lbs., Caster Size: 6" x 2" – Heavy Duty Cradle Carts – Move and store pipe, channel, bar stock, barrels, or drums with these Heavy–Duty Cradle Carts. A large open design that makes loading and unloading by fork trucks and slings easy. All welded construction. Wheels are mounted in a diamond pattern to allow the truck to tilt when going over thresholds and turn about on its own center. Lightweight Aluminum Cradle Cart fits all small to medium loads and rolls on (4) swivel 3" x 1" poly casters. The 4,000 pound Steel Cradle Carts rolls on (2) rigid and (2) swivel phenolic casters. The 10,000 pound units roll on 4–way swivel lock cast steel wheels. Powder coat finish standard on steel cart.

Manufacturer: Morse, Manufacturer Part Number: 201/20-3-50PORTABLE DRUM ROLLER, 16 RPM, 3–PHASE 50Hz MOTOR (OSHA REQUIRES ENCLOSURE)

Manufacturer: Vestil, Manufacturer Part Number: DCC-2896-10Description: Steel, Size (W x L x H): 28" x 96" x 29", Capacity: 10000 lbs., Caster Size: 8" x 3" – Heavy Duty Cradle Carts – Move and store pipe, channel, bar stock, barrels, or drums with these Heavy–Duty Cradle Carts. A large open design that makes loading and unloading by fork trucks and slings easy. All welded construction. Wheels are mounted in a diamond pattern to allow the truck to tilt when going over thresholds and turn about on its own center. Lightweight Aluminum Cradle Cart fits all small to medium loads and rolls on (4) swivel 3" x 1" poly casters. The 4,000 pound Steel Cradle Carts rolls on (2) rigid and (2) swivel phenolic casters. The 10,000 pound units roll on 4–way swivel lock cast steel wheels. Powder coat finish standard on steel cart.

Manufacturer: Vestil, Manufacturer Part Number: DCC-2860-10Description: Steel, Size (W x L x H): 28" x 60" x 29", Capacity: 10000 lbs., Caster Size: 8" x 3" – Heavy Duty Cradle Carts – Move and store pipe, channel, bar stock, barrels, or drums with these Heavy–Duty Cradle Carts. A large open design that makes loading and unloading by fork trucks and slings easy. All welded construction. Wheels are mounted in a diamond pattern to allow the truck to tilt when going over thresholds and turn about on its own center. Lightweight Aluminum Cradle Cart fits all small to medium loads and rolls on (4) swivel 3" x 1" poly casters. The 4,000 pound Steel Cradle Carts rolls on (2) rigid and (2) swivel phenolic casters. The 10,000 pound units roll on 4–way swivel lock cast steel wheels. Powder coat finish standard on steel cart.

Manufacturer: Vestil, Manufacturer Part Number: DCC-28120-10Description: Steel, Size (W x L x H): 28" x 120" x 29", Capacity: 10000 lbs., Caster Size: 8" x 3" – Heavy Duty Cradle Carts – Move and store pipe, channel, bar stock, barrels, or drums with these Heavy–Duty Cradle Carts. A large open design that makes loading and unloading by fork trucks and slings easy. All welded construction. Wheels are mounted in a diamond pattern to allow the truck to tilt when going over thresholds and turn about on its own center. Lightweight Aluminum Cradle Cart fits all small to medium loads and rolls on (4) swivel 3" x 1" poly casters. The 4,000 pound Steel Cradle Carts rolls on (2) rigid and (2) swivel phenolic casters. The 10,000 pound units roll on 4–way swivel lock cast steel wheels. Powder coat finish standard on steel cart.

Manufacturer: Morse, Manufacturer Part Number: 201/20-E3-50PORTABLE DRUM ROLLER, 16 RPM, EXPLOSION–PROOF 3–PHASE 50Hz MOTOR (OSHA REQUIRES ENCLOSURE)

Manufacturer: Morse, Manufacturer Part Number: 201/20-E1-50PORTABLE DRUM ROLLER, 16 RPM, EXPLOSION–PROOF 1–PHASE 50Hz MOTOR (OSHA REQUIRES ENCLOSURE)

Manufacturer: Morse, Manufacturer Part Number: 201/20-E3PORTABLE DRUM ROLLER, 20 RPM, EXPLOSION–PROOF 3–PHASE MOTOR (OSHA REQUIRES ENCLOSURE)

Manufacturer: Morse, Manufacturer Part Number: 201/20-E575PORTABLE DRUM ROLLER, 20 RPM, EXPLOSION–PROOF 3–PHASE 575V MOTOR (OSHA REQUIRES ENCLOSURE)

Manufacturer: Morse, Manufacturer Part Number: 201/20-575PORTABLE DRUM ROLLER, 20 RPM, 3–PHASE 575V MOTOR (OSHA REQUIRES ENCLOSURE)

Manufacturer: Morse, Manufacturer Part Number: 201/20-1-50PORTABLE DRUM ROLLER, 16 RPM, 1–PHASE 50Hz MOTOR (OSHA REQUIRES ENCLOSURE)

Manufacturer: Morse, Manufacturer Part Number: 201/20-3PORTABLE DRUM ROLLER, 20 RPM, 3–PHASE MOTOR (OSHA REQUIRES ENCLOSURE)

Manufacturer: Morse, Manufacturer Part Number: 201B/20-E575PORTABLE DRUM ROLLER, 2 BELTS, 20 RPM, EXPLOSION–PROOF 3–PHASE 575V MOTOR (OSHA REQUIRES ENCLOSURE)