Vestil
Edge-O-Dockleveler Option - Pull Bar
$46.87
Manufacturer: Vestil, Manufacturer Part Number: FM-BARMechanical Edge–of–Dock Levelers Option – Pull Bar Actuation Handle for Mechanical Unit (New Style).
***This item by itself does not meet the manufacturer's (Vestil) $50.00 minimum order requirement. You would need to order enough quantity of this item or other Vestil items to reach the $50.00 mark to complete an order. Please contact us for assistance.***
Vestil
78"W Mechanical Operation Edge-O-Dockleveler w/ 20,000-lbs Capacity
$1,673.44
Manufacturer: Vestil, Manufacturer Part Number: FM-2078Capacity: 20,000 lbs., Operation: Mechanical, Usable Width: 78" – Edge–O–Docklevelers – Permanently attaches to face of dock. Recommended for docks at least 48" high. Each unit provides a service range of 5" up and 5" down. When the trailer departs the lip drops automatically behind the face of the bumpers. Concrete recess is not required. Complete with 2" x 8" x 18" bumpers and installation instructions. Standard ramping length is 27". A steel dock edge is required for proper installation. The Mechanical Edge–O–Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically.
Eagle
Eagle Portable Poly Dockplate
$317.30
Manufacturer: Eagle, Manufacturer Part Number: 1795LIGHTWEIGHT – CONVENIENT – DURABLE Eagle's durable HDPE portable poly dock plate is designed for use with two and four–wheeled dollies, hand trucks, carts and pallet trucks. It features a lightweight ergonomic design, 4" height differential capability, a raised non–slip surface, 750–lb. load capacity, beveled entry and exit edges, two carry handles, high–visibility yellow, integrated guardrails and powder–coated steel legs. Meets OSHA 1910.30(a) requirements.SPECIFICATIONS750 lbs. Load Bearing Capacity - 30 lbs.1 dock plate36" L x 35" W x 5" H
Eagle
Eagle 48" Portable Poly Dockplate
$434.50
Manufacturer: Eagle, Manufacturer Part Number: 179748" Portable Poly Dockplate.
Vestil
SPLIT ALUMINUM TRUCK BRIDGE
$1,161.30
Manufacturer: Vestil, Manufacturer Part Number: WL-ADDSATBAdditional split aluminum bridge for simple access to the scissor dock lift. MFG Part# WL-ADDSATB
Vestil
PULL CHAIN MECH DOCKLEVELER 35K 7X8 FT
$6,491.27
Manufacturer: Vestil, Manufacturer Part Number: RR-78-35The Mechanical Dockleveler is constructed of heavy duty checkered plate deck steel for long term support of the steel channel understructure. The dock leveler allows for easy truck loading and unloading. The leveler is engineered and designed for minimum maintenance and features a smooth pull chain operation. Includes two (2) laminated bumpers. MFG Part# RR-75-20
Vestil
STL DOCKBOARD - EXTRA SPAN HOLES
$7.85
Manufacturer: Vestil, Manufacturer Part Number: HOLE-STLExtra Span Holes for a Steel Dockboard. MFG Part# HOLE-STL
Vestil
Vestil Fork Truck Loading Platform w/ Handrail
$1,464.58
Manufacturer: Vestil, Manufacturer Part Number: FTLP-5454-HRUniform Capacity (pounds): 2,000, Li p Height (in.): 12, Toeboard Height (in.): 6, Fork Pocket Width (in.): 7–1/2, Fork Pocket Height (in.): 2–1/2, Usable Platform Width (in.): 51, Usable Platform Length (in.): 48–1/2, Strap Length (in.): 48 – This Loading Platform for Fork Trucks allows fork trucks to load/unload items into trucks and trailers. Maximum uniform weight capacity is dependent on fork truck capacity. Includes lip to help with transition. Side guard toeboards. Four (4) tie–down rings are included for securing equipment (tie downs not included). Checker plate floor for extra traction. Handrails on two (2) sides, back mesh screen and chain to secure open end. Safety Strap (included) to secure platform to fork truck. Steel construction with blue painted finish.
Vestil
STL DOCKBOARD OPTION - EXTRA SPAN PINS
$5.90
Manufacturer: Vestil, Manufacturer Part Number: PIN-STLExtra Span Pins for a Steel Dockboard. MFG Part# PIN-STL
Vestil
Vestil Fork Truck Loading Platform
$1,101.38
Manufacturer: Vestil, Manufacturer Part Number: FTLP-5454Uniform Capacity (pounds): 2,000, Li p Height (in.): 12, Toeboard Height (in.): 6, Fork Pocket Width (in.): 7–1/2, Fork Pocket Height (in.): 2–1/2, Usable Platform Width (in.): 54, Usable Platform Length (in.): 54, Strap Length (in.): 48 – This Loading Platform for Fork Trucks allows fork trucks to load/unload items into trucks and trailers. Maximum uniform weight capacity is dependent on fork truck capacity. Includes lip to help with transition. Side guard toeboards. Four (4) tie–down rings are included for securing equipment (tie downs not included). Checker plate floor for extra traction. Safety Strap (included) to secure platform to fork truck. Steel construction with blue painted finish.
Vestil
DOCK LIFT OPTIONAL HYDRAULIC HOSE - Model WL-HH
$11.85
Manufacturer: Vestil, Manufacturer Part Number: WL-HHOptional Additional Hydraulic Hose for the Truck Scissor Dock Lift.
Vestil
DOCKBOARD OPTION - EXTRA SPAN PINS - Model PIN
$5.90
Manufacturer: Vestil, Manufacturer Part Number: PINExtra Span Pins for a Dockboard.
Vestil
DOCK PLATE OPTION - SPECIAL LEG LOCATION - Model SLL
$26.85
Manufacturer: Vestil, Manufacturer Part Number: SLLSpecial location of legs for a Dockboard.
Vestil
DOCKBOARD OPTION - EXTRA SPAN HOLES - Model HOLE
$7.85
Manufacturer: Vestil, Manufacturer Part Number: HOLEExtra Span Holes for a Dockboard.
Vestil
DOCKPLATE OPTION - LEGS/HANDLE/HARDWARE - Model LHDL
$34.90
Manufacturer: Vestil, Manufacturer Part Number: LHDLExtra pair of legs with handles & hardware for a Dockplate.
Vestil
EDGE-O-DOCKLEVELER OPTIONAL CANTED EDGE - Model CED
$20.85
Manufacturer: Vestil, Manufacturer Part Number: CEDOptional Canted Edge for a Truck Dockboard.
Vestil
Edge-O-Dockleveler Option - Pulling Hook - Model FMHOOK
$39.85
Manufacturer: Vestil, Manufacturer Part Number: FM-HOOKMechanical Edge–of Dock Levelers Option – Pulling Hook – Pulling Hook for Mechanical Unit (Old Style).
***This item by itself does not meet the manufacturer's (Vestil) $50.00 minimum order requirement. You would need to order enough quantity of this item or other Vestil items to reach the $50.00 mark to complete an order. Please contact us for assistance.***
Vestil
PULL CHAIN MECH DOCKLEVELER 40K 7X5 FT
$6,547.94
Manufacturer: Vestil, Manufacturer Part Number: RR-75-40The Mechanical Dockleveler is constructed of heavy duty checkered plate deck steel for long term support of the steel channel understructure. The dock leveler allows for easy truck loading and unloading. The leveler is engineered and designed for minimum maintenance and features a smooth pull chain operation. Includes two (2) laminated bumpers. MFG Part# RR-75-20
Vestil
ELECTRIC HYDRAULIC W/LED LIGHT PKG
$5,081.67
Manufacturer: Vestil, Manufacturer Part Number: TL-100-F-S-LEDThe Trailer Lock System is designed for installation directly in front of the loading dock. The electric hydraulic system captures the ICC bar on the back of semi-trailers. To ensure maximum safety the unit comes standard with an accumulator that allows the lock to follow the trailer up and down as it is loaded/unloaded. A beeper and flashing light warns the operator if the lock does not engage the trailer properly. A visual indication of the restraint's status is shown at all times by the traffic light outside and the control panel inside. It comes standard with light package, control panel and three (3) large visual signs. MFG Part# TL-100-F-S-LED
Vestil
STEEL TRUCK DOCKPLATE 6600 LB 72 X 60
$1,512.95
Manufacturer: Vestil, Manufacturer Part Number: SEH-7260The Steel Truck Dockplate is constructed of high strength INX-55 (55,000 psi) steel. Safety locking legs prevent slippage between truck and dock. Safety tread plate helps provide positive traction. Beveled edges for smooth entry and exit. Chain pickup comes standard. Designed with an 11° bend located 9in from the beveled edge. The legs are 10in from the beveled edge. Manufactured in compliance with OSHA. When using three wheeled pallet trucks, select capacity +20% due to concentrated load center of board. MFG Part# SEH-7260
Vestil
PULL CHAIN MECH DOCKLEVELER 30K 7X8 FT
$6,092.87
Manufacturer: Vestil, Manufacturer Part Number: RR-78-30The Mechanical Dockleveler is constructed of heavy duty checkered plate deck steel for long term support of the steel channel understructure. The dock leveler allows for easy truck loading and unloading. The leveler is engineered and designed for minimum maintenance and features a smooth pull chain operation. Includes two (2) laminated bumpers. MFG Part# RR-75-20
Vestil
STEEL TRUCK DOCKPLATE 3860 LB 72 X 60
$1,107.64
Manufacturer: Vestil, Manufacturer Part Number: SE-7260The Steel Truck Dockplate is constructed of high strength INX-55 (55,000 psi) steel. Safety locking legs prevent slippage between truck and dock. Safety tread plate helps provide positive traction. Beveled edges for smooth entry and exit. Chain pickup comes standard. Designed with an 11° bend located 9in from the beveled edge. The legs are 10in from the beveled edge. Manufactured in compliance with OSHA. When using three wheeled pallet trucks, select capacity +20% due to concentrated load center of board. MFG Part# SE-7260
Vestil
RADIO REMOTE CONTROL 2 BUTTON
$1,279.41
Manufacturer: Vestil, Manufacturer Part Number: RRC-2PBThe Radio Remote Control puts the power in your hands (lift, hold, lower). It is lightweight with a two-button remote control that gives the individual more freedom to control the scissor table (Range can be adjusted for optimum signal strength and can be reduced if required). The Controls are approved to meet part 15 of the Federal Communications Code and designed to prevent crosstalk and false triggering from stray radio frequencies. MFG Part# RRC-2PB
Vestil
PULL CHAIN MECH DOCKLEVELER 50K 7X8 FT
$7,488.63
Manufacturer: Vestil, Manufacturer Part Number: RR-78-50The Mechanical Dockleveler is constructed of heavy duty checkered plate deck steel for long term support of the steel channel understructure. The dock leveler allows for easy truck loading and unloading. The leveler is engineered and designed for minimum maintenance and features a smooth pull chain operation. Includes two (2) laminated bumpers. MFG Part# RR-75-20