Stormwater Management

Manufacturer: UltraTech, Manufacturer Part Number: 9724-OSContain Sediment And Oil Pumped Out During Dewatering Operations. Retains both oil and sediment, offering a combination of benefits not available in alternative dewatering bags. Standard and custom sizes available. Helps comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in Storm Water Pollution Prevention Plans. 6' x 6'. 6' L x 6' W. 14 lbs.

Manufacturer: UltraTech, Manufacturer Part Number: 939360"x60" High–Capacity DrainGuard, Oil and Sediment Model: High Capacity Catch Basin Insert Captures Large Amounts Of Sediment And Oil. Catch basin insert is quickly and easily installed – uses grating and retainer bars (must be purchased separately) to secure in place. Heavy–duty, needle–punched geotextile material absorbs oil, grease and other hydrocarbons – captures up to 300 lbs. of sediment, dirt and debris. Large, 3" wide, polyester handling straps help in removal of full units. The use of backhoes, forklifts or other equipment is recommended for removal of units with large amounts of silt, dirt and sediment. 60" x 60" skirt fits almost any drain (up to 54" x 54"). Excess material can be trimmed if desired. Helps comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in StormWater Pollution Prevention Plans. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: UltraTech, Manufacturer Part Number: 9251Curb Guard Plus 4' Section: Protect Curb Inlets From Sediment–Laden Stormwater Runoff. Quick and easy installation. Modular design – build to any length. Units can be quickly and easily connected to form longer lengths. Wedge–shaped, heavy–duty foam secures unit in curb inlet. Woven, polypropylene material provides high flow rate – will not cause ponding or flooding. Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDL requirements. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: UltraTech, Manufacturer Part Number: 9163 Protect Drains and Inlets WITHOUT Lifting Any Grates! Keeps dirt, sand, sediment, trash and debris out of drains Includes a bypass port to help prevent ponding and flooding during large rainfall events Quick and easy installation using built–in magnets – no more lifting of heavy catch basin grates Available in several sizes for street drains and combination drains. Custom sizes also available. Heavy–duty, reinforced material allows up to 192 gal/ft2/min. through drains Low maintenance – simply remove unit, shake off excess dirt, silt and sediment and put back in place Low–profile design can be driven over and is unobtrusive to traffic and personnel Curb–Style model works with combination drains SPECIFICATIONS5 lbs.1 inlet guard24" L x 24" W

Manufacturer: UltraTech, Manufacturer Part Number: 9164 Protect Drains and Inlets WITHOUT Lifting Any Grates! Keeps dirt, sand, sediment, trash and debris out of drains Includes a bypass port to help prevent ponding and flooding during large rainfall events Quick and easy installation using builtin magnets no more lifting of heavy catch basin grates Available in several sizes for street drains and combination drains. Custom sizes also available. Heavyduty, reinforced material allows up to 192 gal/ft 2/min. through drains Low maintenance simply remove unit, shake off excess dirt, silt and sediment and put back in place Lowprofile design can be driven over and is unobtrusive to traffic and personnel CurbStyle model works with combination drains SPECIFICATIONS6 lbs.1 inlet guard24" L x 36" W

Manufacturer: UltraTech, Manufacturer Part Number: 9165 Protect Drains and Inlets WITHOUT Lifting Any Grates! Keeps dirt, sand, sediment, trash and debris out of drains Includes a bypass port to help prevent ponding and flooding during large rainfall events Quick and easy installation using built–in magnets – no more lifting of heavy catch basin grates Available in several sizes for street drains and combination drains. Custom sizes also available. Heavy–duty, reinforced material allows up to 192 gal/ft2/min. through drains Low maintenance – simply remove unit, shake off excess dirt, silt and sediment and put back in place Low–profile design can be driven over and is unobtrusive to traffic and personnel Curb–Style model works with combination drains SPECIFICATIONS6 lbs.1 inlet guard24" L x 48" W

Manufacturer: UltraTech, Manufacturer Part Number: 9760Keep Oil, Sediment, Floatables And Other Contaminants Out Of Curb Inlets. For use in drains with curb inlets only Two heavy–duty tension rods keep unit secured inside inlet for a clean, flush–mounted installation Filtering material is quickly and easily replaced Helps comply with NPDES, 40 CFR 122.26 (1999) SPECIFICATIONS4 lbs.1 curb guardFor curb inlets from 24" - 42"

Manufacturer: UltraTech, Manufacturer Part Number: 9761Keep Oil, Sediment, Floatables And Other Contaminants Out Of Curb Inlets. For use in drains with curb inlets only Two heavy–duty tension rods keep unit secured inside inlet for a clean, flush–mounted installation Filtering material is quickly and easily replaced Helps comply with NPDES, 40 CFR 122.26 (1999) SPECIFICATIONS5 lbs.1 curb guardFor curb inlets from 42" - 60"

Manufacturer: UltraTech, Manufacturer Part Number: 9738Dewatering Bag, Reusable Model: 5' x 7' Replacement Bag: Reusable Dewatering Bag For Large Jobs And Big Savings. Use for dewatering operations with large quantities of silt, sediment or dirt. Bags can be emptied and reused repeatedly. Large 3' – 5' opening allows easy access and removal of trapped sediment. Galvanized steel Locking Rods (Part# 9735) are quickly and easily installed to secure bag opening during dewatering. Helps comply with NPDES, 40 CFR 122.26 (1999). A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: UltraTech, Manufacturer Part Number: 9735Locking Rods only–For Dewatering Bags.

Manufacturer: UltraTech, Manufacturer Part Number: 9729-OSDewatering Bag: Oil & Sediment Model, 3' x 4': Contain Sediment And Oil Pumped Out During Dewatering Operations. Retains both oil and sediment, offering a combination of benefits not available in alternative dewatering bags. Standard and custom sizes available. Accommodates up to 4" discharge hose. Helps comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in Stormwater Pollution Part# 9724–O/S Prevention Plans. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: UltraTech, Manufacturer Part Number: 9736Replacement Bag, 3' x 5' for Reusable Dewatering Bag.

Manufacturer: Vestil, Manufacturer Part Number: DRAIN-DDOverall Height: 6–1/2", Overall Width: 6", Depth: 8" – Downspout Drain Water Disperser – Attaches to most standard down spouts. Easy installation, fits up and around the end of downspout. During a rainstorm water collects at the bottom of drains, ruining grass and landscaping. This gutter downspout diverter evenly disperses the water outward over a larger area. Constructed of aluminum. Installation hardware not included. ***This downspout dispenser by itself does not meet the manufacturer's (Vestil) $50.00 minimum order requirement. You would need to order enough quantity of this item or other Vestil items to reach the $50.00 mark to complete an order. Please contact us for assistance.***

Manufacturer: UltraTech, Manufacturer Part Number: 9378 Drain Guard, Recycled Model: 1–Pack: Keep Oil and Sediment From Entering Catch Basins With Environmentally Friendly Inserts. Made completely out of Ultra-Filter-Tex material – 100% recycled content. Superior water flow rate (151 gal/ft.2), together with built–in overflow ports prevents ponding and flooding. Ultra-Filter-Tex material captures silt and sediment from runoff in addition to absorbing hydrocarbons. Quick and easy installation – simply lift catch basin grate, lower Drain Guard in place, and replace the grate. Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDL requirements. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: UltraTech, Manufacturer Part Number: 9376 The Ultimate In Catch Basin Inserts Removes Dirt, Sediment, Hydrocarbons, And Utilizes An Effective Antimicrobial Coating Same hydrocarbon and sediment removal capabilities as the Ultra–Drain Guard, Oil & Sediment Plus Model but with additional antimicrobial properties.1.5" x 20" strips of Ultra-Filter-Tex AM (Antimicrobial) hang from the bottom of the Drain Guard and become immersed in standing catch basin water, allowing contact with destructive bacteria. Antimicrobial coated Ultra-Filter-Tex "tentacles" help address stormwater related issues with single–cell organisms (bacteria, fungi, yeast, and algae) that are found in stagnant stormwater and catch basins. Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDL requirements.

Manufacturer: UltraTech, Manufacturer Part Number: 9377The Ultimate In Catch Basin Inserts Removes Dirt, Sediment, Hydrocarbons, And Utilizes An Effective Antimicrobial Coating Same hydrocarbon and sediment removal capabilities as the Ultra–Drain Guard, Oil & Sediment Plus Model but with additional antimicrobial properties.1.5" x 20" strips of Ultra-Filter-Tex AM (Antimicrobial) hang from the bottom of the Drain Guard and become immersed in standing catch basin water, allowing contact with destructive bacteria. Antimicrobial coated Ultra-Filter-Tex "tentacles" help address stormwater related issues with single–cell organisms (bacteria, fungi, yeast, and algae) that are found in stagnant stormwater and catch basins. Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDL requirements.    

Manufacturer: UltraTech, Manufacturer Part Number: 9397Drain Guard: Heavy Metal Removal Model, 48" x 36", 1–Pack: Remove Heavy Metal Runoff Water At The Storm Drain. Specialized catch basin insert has "quilted" sections sewn into the body of the unit where stormwater flows through. A custom blend of heavy metal removal media is contained in each section of the pouch. A non–permeable, PVC skirt at the top of the unit funnels all water to the lower portion of the Ultra–Drain Guard where it is forced to move through the media before it can move on into the storm drain. Removes hydrocarbons, heavy metals, sediments and other organics from stormwater and industrial runoff. Helps comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in Storm Water Pollution Prevention Plans. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: UltraTech, Manufacturer Part Number: 9229Drain Guard: Trash and Debris, 10–Pack: Keep Sediment And Other Pollutants From Entering The Water System With Ultra–DrainGuard Catch Basin Inserts. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: UltraTech, Manufacturer Part Number: 9208 Helps inform and educate the public that most storm drains go directly into waterways untreated Installs quickly and easily using permanent adhesive – cleaner and more environmentally friendly than paint and stencils Designed for long life – heavy–duty plastic construction is scratch–resistant and will not rust or corrode Includes 25 Markers and adhesive Helps comply with NPDES, 40 CFR 122.26 (1999) SPECIFICATIONS30 lbs.25 markers and adhesive

Manufacturer: GoBagger, Manufacturer Part Number: GOBAGGERTHE REVOLUTIONARY FLOOD FIGHTING TOOL. Poly Bags? Burlap Bags? – Any Kind of Bag! Any Size! Wet or Dry Sand? – NO PROBLEM! The GoBagger® works with any kind of bag or fill that you have. Since the beginning...if you wanted to fill sand bags for flood emergencies, it was a two man job...one to hold the bag and one to shovel sand into the bag. It use to take three to four shovel loads to fill one bag – which is way too slow and tedious. NOT ANYMORE...now there's GoBagger®. Just Three Easy Steps Load and grip the sandbag Scoop the sand into the unit Lift, release and reload SPECIFICATIONS1 unit7 lbs.

Manufacturer: UltraTech, Manufacturer Part Number: 9279-OSCatch Sediment, Oil, Silt, Debris And Other Runoff Before they Enter Our Waterways For use with flat grate catch basins. Allows run–off to flow through while blocking sediment and/or capturing oil. Standard and custom sizes available. Helps comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in Storm Water Pollution Prevention Plans.

Manufacturer: UltraTech, Manufacturer Part Number: 9273-OSCatch Sediment, Oil, Silt, Debris And Other Runoff Before they Enter Our Waterways For use with flat grate catch basins. Allows run–off to flow through while blocking sediment and/or capturing oil. Standard and custom sizes available. Helps comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in Storm Water Pollution Prevention Plans.

Manufacturer: UltraTech, Manufacturer Part Number: 9276-OSCatch Sediment, Oil, Silt, Debris And Other Runoff Before they Enter Our Waterways For use with flat grate catch basins. Allows run–off to flow through while blocking sediment and/or capturing oil. Standard and custom sizes available. Helps comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in Storm Water Pollution Prevention Plans.

Manufacturer: UltraTech, Manufacturer Part Number: 9277-OSCatch Sediment, Oil, Silt, Debris And Other Runoff Before they Enter Our Waterways For use with flat grate catch basins. Allows run–off to flow through while blocking sediment and/or capturing oil. Standard and custom sizes available. Helps comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in Storm Water Pollution Prevention Plans.

Manufacturer: UltraTech, Manufacturer Part Number: 9280-OSCatch Sediment, Oil, Silt, Debris And Other Runoff Before they Enter Our Waterways For use with flat grate catch basins. Allows run–off to flow through while blocking sediment and/or capturing oil. Standard and custom sizes available. Helps comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in Storm Water Pollution Prevention Plans.

Manufacturer: UltraTech, Manufacturer Part Number: 9274-OSCatch Sediment, Oil, Silt, Debris And Other Runoff Before they Enter Our Waterways For use with flat grate catch basins. Allows run–off to flow through while blocking sediment and/or capturing oil. Standard and custom sizes available. Helps comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in Storm Water Pollution Prevention Plans.

Manufacturer: UltraTech, Manufacturer Part Number: 9275-OSCatch Sediment, Oil, Silt, Debris And Other Runoff Before they Enter Our Waterways For use with flat grate catch basins. Allows run–off to flow through while blocking sediment and/or capturing oil. Standard and custom sizes available. Helps comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in Storm Water Pollution Prevention Plans.

Manufacturer: UltraTech, Manufacturer Part Number: 9277-SEDCatch Sediment, Oil, Silt, Debris And Other Runoff Before they Enter Our Waterways For use with flat grate catch basins. Allows run–off to flow through while blocking sediment and/or capturing oil. Standard and custom sizes available. Helps comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in Storm Water Pollution Prevention Plans.

Manufacturer: UltraTech, Manufacturer Part Number: 9276-SEDCatch Sediment, Oil, Silt, Debris And Other Runoff Before they Enter Our Waterways For use with flat grate catch basins. Allows run–off to flow through while blocking sediment and/or capturing oil. Standard and custom sizes available. Helps comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in Storm Water Pollution Prevention Plans.

Manufacturer: UltraTech, Manufacturer Part Number: 9274-SEDCatch Sediment, Oil, Silt, Debris And Other Runoff Before they Enter Our Waterways For use with flat grate catch basins. Allows run–off to flow through while blocking sediment and/or capturing oil. Standard and custom sizes available. Helps comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in Storm Water Pollution Prevention Plans.

Manufacturer: UltraTech, Manufacturer Part Number: 9275-SEDCatch Sediment, Oil, Silt, Debris And Other Runoff Before they Enter Our Waterways For use with flat grate catch basins. Allows run–off to flow through while blocking sediment and/or capturing oil. Standard and custom sizes available. Helps comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in Storm Water Pollution Prevention Plans.

Manufacturer: UltraTech, Manufacturer Part Number: 9280-SEDCatch Sediment, Oil, Silt, Debris And Other Runoff Before they Enter Our Waterways For use with flat grate catch basins. Allows run–off to flow through while blocking sediment and/or capturing oil. Standard and custom sizes available. Helps comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in Storm Water Pollution Prevention Plans.