Guards and Protectors

Manufacturer: Eagle, Manufacturer Part Number: 1730Forget About Painting! No need to paint and scrape, these Eagle® Bumper Post Sleeves make old bollard posts look like NEW! High–density polyethylene construction won't fade, rust or crack. Eliminates annual scraping and painting while helping to protect vehicles and the post from impact damage. Unique vertical ribs provide extra impact protection while allowing for easy slide–on installation. Sleeves are 56" long and can be trimmed for an exact fit. Available in your choice of Yellow, White, Red, Green, Orange, Lime, Brown, Black or Handicap Blue. Please specify color when ordering. 72" sleeves are also available – call us for details.SPECIFICATIONS6 lbs.1 post sleeve7.875" O.D., 6.875" I.D.

Manufacturer: Vestil, Manufacturer Part Number: DSG-48Fits Pipe Up to Diameter (in.): 5, Inside Width (in.): 6, Inside Length (in.): 6, Construction: Steel – Protect down spouts and pipes attached to buildings from damage caused by fork trucks, vehicles, and mowers. This Pipe and Downspout Protector fits around standard down spouts. Easy bolt on installation – installation hardware not included. Choose a steel protector for optimum strength, powder coated safety yellow.

Manufacturer: Vestil, Manufacturer Part Number: BOL-24-2Bollards can be used both indoors and outdoors to protect work areas, racking and personnel. Powder coated safety yellow finish. Molded rubber caps are removable on 4" and 5" diameter units. Steel caps are welded on the 1" diameter units. Base plates include four (4) pre–drilled mounting holes. Mounting kits and replacement caps available. Welded steel construction. 24" Height.

Manufacturer: Little Giant, Manufacturer Part Number: SGS-RAdjustable width 22–1/2" to 36". Set screws secure at desired width. Stainless steel torsion spring closes the gate automatically. Spring is tension adjustable, and reversible. Meets OSHA 1910.23a requirements. Powder Coated red finish (except spring). Outside tubing 1.37" OD x 12 gauge wall. Mounting channel is 2" x 1" with two mounting holes (hardware not included).

Manufacturer: Vestil, Manufacturer Part Number: VGLT-16-2F-YA Surface Mount Flexible Stake is ideal for high traffic and high impact locations. Constructed of polycarbonate extrusion and flexible hinge which makes it virtually indestructible. Easy four (4) part assembly which is the post and hinge, base, grips and pin. Quick to install, they can be mounted to concrete, asphalt, wood and other hard surfaces using appropriate hardware (not included). FAA approved.

Manufacturer: Vestil, Manufacturer Part Number: BOL-RF-BASEThe Removable Bollard Base bolts to your cement floor.

Manufacturer: Vestil, Manufacturer Part Number: CS-33-KIT-4The hardware package provides a simple solution to mounting car stops to a concrete surface. The package includes bolts, anchors, and washers for safe, secure attachment. MFG Part# CS-33-KIT-4

Manufacturer: Vestil, Manufacturer Part Number: CS-33-KIT-2The hardware package provides a simple solution to mounting car stops to a concrete surface. The package includes bolts, anchors, and washers for safe, secure attachment. MFG Part# CS-33-KIT-2

Manufacturer: Vestil, Manufacturer Part Number: BOL-JK-CN15Create barriers around workstations, machinery, and outdoor space with Steel Pipe Bollard with Chain Slots. Ideal for indoor and outdoor applications. Easy to assemble. Place chain into chain slots, storing any excess chain inside the bollard, the chain slots hold chain connected to other bollards.

Manufacturer: Vestil, Manufacturer Part Number: RBG-43-OCThe RackBack ® panel bolts directly to your existing pallet rack uprights creating a sturdy barrier between inventory and the ground below. Durable all welded, angle frame panels give constant protection from dangerous spills; protecting personnel while containing inventory. The unit is competitively priced with netting style backing, easy to install and protects employees by making sure nothing can fall when pushed by a lift truck or if a pallet breaks. Panels can be stacked one on top of the other to top of rack system. The "Above the Top" mounting allows panels to extend above top rack beam.

Manufacturer: Vestil, Manufacturer Part Number: SNAP-H-25The Snap Hook for the Welded Chain Attachments for Bollards allows you to create barriers around workstations and machinery. Ideal for indoor and outdoor applications.

Manufacturer: Vestil, Manufacturer Part Number: RBG-1FMCThe RackBack ® panel bolts directly to your existing pallet rack uprights creating a sturdy barrier between inventory and the ground below. Durable all welded, angle frame panels give constant protection from dangerous spills; protecting personnel while containing inventory. The unit is competitively priced with netting style backing, easy to install and protects employees by making sure nothing can fall when pushed by a lift truck or if a pallet breaks. Panels can be stacked one on top of the other to top of rack system. The "Above the Top" mounting allows panels to extend above top rack beam.

Manufacturer: Vestil, Manufacturer Part Number: RBG-46-OCThe RackBack ® panel bolts directly to your existing pallet rack uprights creating a sturdy barrier between inventory and the ground below. Durable all welded, angle frame panels give constant protection from dangerous spills; protecting personnel while containing inventory. The unit is competitively priced with netting style backing, easy to install and protects employees by making sure nothing can fall when pushed by a lift truck or if a pallet breaks. Panels can be stacked one on top of the other to top of rack system. The "Above the Top" mounting allows panels to extend above top rack beam.

Manufacturer: Vestil, Manufacturer Part Number: BOL-JK-CN6Create barriers around workstations, machinery, and outdoor space with Steel Pipe Bollard with Chain Slots. Ideal for indoor and outdoor applications. Easy to assemble. Place chain into chain slots, storing any excess chain inside the bollard, the chain slots hold chain connected to other bollards.

Manufacturer: Vestil, Manufacturer Part Number: DOME-4.5Height: 3" , Outside Diameter: 14" , Base Plate: 8" x 8" - Protective Dome Cover for Bollard - Prevent accidnts and injuries from people tripping over raised bolts. Easy to use devise slides over bollards covering mounting hardware and base plate for a nice clean finish. Durable yellow powder coat finish. Steel construction, and no hardware required.

Manufacturer: Vestil, Manufacturer Part Number: BOL-DRINGThe welded D-Ring Chain Attachment for Bollards allows you to create barriers around workstations and machinery. Ideal for indoor and outdoor applications. Available on all sizes of Steel Pipe Bollards. (Chain sold separately.) Powder coat safety yellow finish.

Manufacturer: Vestil, Manufacturer Part Number: BOL-JHOOKThe welded J-Hook Chain Attachment for Bollards allows you to create barriers around workstations and machinery. Ideal for indoor and outdoor applications. Available on all sizes of Steel Pipe Bollards. (Chain sold separately.) Powder coat safety yellow finish.

Manufacturer: Vestil, Manufacturer Part Number: C-CONSteel Square Safety Handrails – Corner Connectors.

Manufacturer: Vestil, Manufacturer Part Number: MG-WP-AModular Guard System can be ordered to fit almost any application. Designed for quick and easy assembly. Railing sections are installed and secured to each post with a single bolt. Select from different railing lengths to custom fit your application. Railing systems are made from heavyduty 3" square steel tubing. Wall mounting posts may be used to secure guard assembly to a wall. Durable safety yellow powder coat finish. Steel construction. All components sold separately. ***This item by itself does not meet the manufacturer's (Vestil) $50.00 minimum order requirement. You would need to order enough quantity of this item or other Vestil items to reach the $50.00 mark to complete an order. Please contact us for assistance.***SPECIFICATIONS6.875" x 2.5" x 2.5" - 7 lbs.

Manufacturer: Vestil, Manufacturer Part Number: DOME-5.5Use with: 5-1/2" diameter bollards , Outside Diameter: 14" , Height: 3" - Protective Dome Covers for Bollards - Prevent accidents and injuries from people tripping over raised bolts. Easy to use device slides over bollards covering mounting hardware and base plate for a nice clean finish. Durable yellow powder coat finish. Steel construction. No hardware required.

Manufacturer: Vestil, Manufacturer Part Number: NPG6-24Protect pallet racking and wall corners against damage from fork trucks, pallet trucks, and carts with Low Profile Rack Guards. All components are laser cut. Quick and easy two–hole installation. Installs in half the time of other guards. Safety yellow powder coat finish. Steel construction. Mounting kit sold separately.SPECIFICATIONS24" Height10" x 3" x 24" - 26 lbs.

Manufacturer: UltraTech, Manufacturer Part Number: 2374 Heavy–Duty Magnet Makes Installation Quick and Easy! Protect warehouse racking from damage caused by forklifts, pallet jacks and other equipment Heavy–duty magnet holds unit securely in place – no hardware required for installation Polyethylene construction is maintenance–free – no painting or upkeep required Safety yellow color with contrasting black warning stripes provides excellent visual reference for drivers and other warehouse personnel Stack multiple units for additional protection Works with racking up to 4” wide SPECIFICATIONS1.5 lbs.1 unit3.25" D x 5.375" W 15.5" H

Manufacturer: Vestil, Manufacturer Part Number: NPG6-18Protect pallet racking and wall corners against damage from fork trucks, pallet trucks, and carts with Low Profile Rack Guards. All components are laser cut. Quick and easy two–hole installation. Installs in half the time of other guards. Safety yellow powder coat finish. Steel construction. Mounting kit sold separately.SPECIFICATIONS18" Height10" x 3" x 18" - 19 lbs.

Manufacturer: Vestil, Manufacturer Part Number: NPG6-12Protect pallet racking and wall corners against damage from fork trucks, pallet trucks, and carts with Low Profile Rack Guards. All components are laser cut. Quick and easy two–hole installation. Installs in half the time of other guards. Safety yellow powder coat finish. Steel construction. Mounting kit sold separately.SPECIFICATIONS12" Height10" x 3" x 12" - 13 lbs.

Manufacturer: Vestil, Manufacturer Part Number: NPG4-24Protect pallet racking and wall corners against damage from fork trucks, pallet trucks, and carts with Low Profile Rack Guards. All components are laser cut. Quick and easy two–hole installation. Installs in half the time of other guards. Safety yellow powder coat finish. Steel construction. Mounting kit sold separately.SPECIFICATIONS24" Height8" x 3" x 24" - 28 lbs.

Manufacturer: Vestil, Manufacturer Part Number: MG-WP-Bsquare steel tubing. Wall mounting posts may be used to secure guard assembly to a wall. Durable safety yellow powder coat finish. Steel construction. All components sold separately. ***This item by itself does not meet the manufacturer's (Vestil) $50.00 minimum order requirement. You would need to order enough quantity of this item or other Vestil items to reach the $50.00 mark to complete an order. Please contact us for assistance.***SPECIFICATIONS6.875" x 3" x 3" - 8 lbs.

Manufacturer: Vestil, Manufacturer Part Number: NPG4-36Protect pallet racking and wall corners against damage from fork trucks, pallet trucks, and carts with Low Profile Rack Guards. All components are laser cut. Quick and easy two–hole installation. Installs in half the time of other guards. Safety yellow powder coat finish. Steel construction. Mounting kit sold separately.SPECIFICATIONS36" Height8" x 3" x 36" - 18 lbs.

Manufacturer: Vestil, Manufacturer Part Number: NPG4-18Protect pallet racking and wall corners against damage from fork trucks, pallet trucks, and carts with Low Profile Rack Guards. All components are laser cut. Quick and easy two–hole installation. Installs in half the time of other guards. Safety yellow powder coat finish. Steel construction. Mounting kit sold separately. ***This item by itself does not meet the manufacturer's (Vestil) $50.00 minimum order requirement. You would need to order enough quantity of this item or other Vestil items to reach the $50.00 mark to complete an order. Please contact us for assistance.***SPECIFICATIONS18" Height8" x 3" x 18" - 21 lbs.

Manufacturer: Vestil, Manufacturer Part Number: CS-33-KIT-3Concrete hardware kit includes 3 bolts, anchors and washers. ***This item by itself does not meet the manufacturer's (Vestil) $50.00 minimum order requirement. You would need to order enough quantity of this item or other Vestil items to reach the $50.00 mark to complete an order. Please contact us for assistance.***SPECIFICATIONS4" x 2" x 2" - 4 lbs.

Manufacturer: Vestil, Manufacturer Part Number: NPG4-12Protect pallet racking and wall corners against damage from fork trucks, pallet trucks, and carts with Low Profile Rack Guards. All components are laser cut. Quick and easy two–hole installation. Installs in half the time of other guards. Safety yellow powder coat finish. Steel construction. Mounting kit sold separately.SPECIFICATIONS12" Height8" x 3" x 12" - 14 lbs.

Manufacturer: Vestil, Manufacturer Part Number: VDKR-VM2The wall mount socket is the ideal addition to the safety railings. For proper installation to wall or structures the mounting creates a position for the railing to be connected. The unit includes a bright finish for clear visibility and is sold as each. MFG Part# VDKR-VM2

Manufacturer: Vestil, Manufacturer Part Number: VDKR-BB-WBarricade Base with Wheels for Pipe Safety Railing.