Justrite – tagged "over-1000" – Page 19

Justrite R11 INSULATION, 12 DRUM $1,060.90

Manufacturer: Justrite, Manufacturer Part Number: 915609Storing hazardous chemicals often requires specific temperature regulation in the locker. Installed in the ceiling and walls, R–11 insulation is required when heating and cooling packages are ordered. For use with 12–drum lockers. (This accessory must be purchased in conjunction with a locker to ensure proper installation and/or to retain FM approval.)

Justrite R11 INSULATION, 16 DRUM $1,227.60

Manufacturer: Justrite, Manufacturer Part Number: 915611Storing hazardous chemicals often requires specific temperature regulation in the locker. Installed in the ceiling and walls, R–11 insulation is required when heating and cooling packages are ordered. For use with 16–drum lockers. (This accessory must be purchased in conjunction with a locker to ensure proper installation and/or to retain FM approval.)

Justrite RAMP, 2 DRUM LOCKER $2,472.00

Manufacturer: Justrite, Manufacturer Part Number: 915001Ramps are available for added convenience when loading or unloading chemicals. For use with 2–drum (52–cu ft) lockers.

Justrite RAMP, 4 DRUM LOCKER $2,266.00

Manufacturer: Justrite, Manufacturer Part Number: 915003Ramps are available for added convenience when loading or unloading chemicals. For use with 4– through 16–drum (105– through 506–cu ft) lockers.

Justrite Rigid-Lock QuickBerm, 10' x 10' x 1' $1,497.60

Manufacturer: Justrite, Manufacturer Part Number: 28519Rigid–Lock QuickBerm® Safe, drive–in spill containment for drums, IBC totes, and tanks! Single–piece construction — patented Rigid–Lock wall–support system integral to berm provides unobstructed work space. Quick and easy setup — no assembly required. Durable modified PVC–coated fabric withstands long–term UV exposure — great for outdoor use. Ergonomic design provides 100% inside berm accessibility with an unobstructed side–to–side floor space for vehicle tires, foot traffic and cleaning. The patented Rigid–Lock wall–support design protects personnel against trips and falls when walking along the outside perimeter. Built–in stainless steel wall supports lock the sidewalls in a 12–in (305–mm) high, 90° vertical position. The Rigid–Lock QuickBerm® offers immediate, secure deployment and no–worry, spill–readiness. Like the QuickBerm® Plus the standard QuickBerm® withstands a broad range of chemicals including petroleum, oils, grease and most acids — durable enough for extended wear. Exceptionally strong structural integrity includes a reinforced CriticalCorner™ design featuring wraparound diagonal radio frequency welds to prevent billowing, unwrapping or sagging of the corners during full containment for fluid–tight reliability. Walls include a 1–in (25–mm) fray–resistant finished hem along the top rim for added wall strength and integrity. Each support includes a heavy–duty brass grommet for anchoring the berm under high wind conditions. Anchoring stakes not included. Sidewalls lower quickly for easy drive–in and out. Portable design folds down quickly for storage and transport. Optional tarps, ground mats, track mats or track runners are available to provide extra resistance against rocky surfaces or heavy in–out traffic use. Helps comply with EPA for containment and spill prevention (SPCC). Note: the difference between the Rigid–Lock QuickBerm® Plus and the standard Rigid–Lock QuickBerm® is the durability of the PVC–coated fabric. The Plus version is thicker and more durable for more frequent drive–in or –out applications. The standard QuickBerm® is better suited for infrequent drive–in or —out scenarios, pedestrian traffic and for placing heavy materials within the working space.SPECIFICATIONS745 gal. Sump Capacity - 60 lbs1 berm10' x 10' x 1'

Justrite Rigid-Lock QuickBerm, 12' x 12' x 1' $1,508.00

Manufacturer: Justrite, Manufacturer Part Number: 28522Rigid–Lock QuickBerm® Safe, drive–in spill containment for drums, IBC totes, and tanks! Single–piece construction — patented Rigid–Lock wall–support system integral to berm provides unobstructed work space. Quick and easy setup — no assembly required. Durable modified PVC–coated fabric withstands long–term UV exposure — great for outdoor use. Ergonomic design provides 100% inside berm accessibility with an unobstructed side–to–side floor space for vehicle tires, foot traffic and cleaning. The patented Rigid–Lock wall–support design protects personnel against trips and falls when walking along the outside perimeter. Built–in stainless steel wall supports lock the sidewalls in a 12–in (305–mm) high, 90° vertical position. The Rigid–Lock QuickBerm® offers immediate, secure deployment and no–worry, spill–readiness. Like the QuickBerm® Plus the standard QuickBerm® withstands a broad range of chemicals including petroleum, oils, grease and most acids — durable enough for extended wear. Exceptionally strong structural integrity includes a reinforced CriticalCorner™ design featuring wraparound diagonal radio frequency welds to prevent billowing, unwrapping or sagging of the corners during full containment for fluid–tight reliability. Walls include a 1–in (25–mm) fray–resistant finished hem along the top rim for added wall strength and integrity. Each support includes a heavy–duty brass grommet for anchoring the berm under high wind conditions. Anchoring stakes not included. Sidewalls lower quickly for easy drive–in and out. Portable design folds down quickly for storage and transport. Optional tarps, ground mats, track mats or track runners are available to provide extra resistance against rocky surfaces or heavy in–out traffic use. Helps comply with EPA for containment and spill prevention (SPCC). Note: the difference between the Rigid–Lock QuickBerm® Plus and the standard Rigid–Lock QuickBerm® is the durability of the PVC–coated fabric. The Plus version is thicker and more durable for more frequent drive–in or –out applications. The standard QuickBerm® is better suited for infrequent drive–in or —out scenarios, pedestrian traffic and for placing heavy materials within the working space.SPECIFICATIONS1,075 gal. Sump Capacity - 74 lbs1 berm12' x 12' x 1'

Justrite Rigid-Lock QuickBerm, 12' x 16' x 1' $1,996.80

Manufacturer: Justrite, Manufacturer Part Number: 28524Rigid–Lock QuickBerm® Safe, drive–in spill containment for drums, IBC totes, and tanks! Single–piece construction — patented Rigid–Lock wall–support system integral to berm provides unobstructed work space. Quick and easy setup — no assembly required. Durable modified PVC–coated fabric withstands long–term UV exposure — great for outdoor use. Ergonomic design provides 100% inside berm accessibility with an unobstructed side–to–side floor space for vehicle tires, foot traffic and cleaning. The patented Rigid–Lock wall–support design protects personnel against trips and falls when walking along the outside perimeter. Built–in stainless steel wall supports lock the sidewalls in a 12–in (305–mm) high, 90° vertical position. The Rigid–Lock QuickBerm® offers immediate, secure deployment and no–worry, spill–readiness. Like the QuickBerm® Plus the standard QuickBerm® withstands a broad range of chemicals including petroleum, oils, grease and most acids — durable enough for extended wear. Exceptionally strong structural integrity includes a reinforced CriticalCorner™ design featuring wraparound diagonal radio frequency welds to prevent billowing, unwrapping or sagging of the corners during full containment for fluid–tight reliability. Walls include a 1–in (25–mm) fray–resistant finished hem along the top rim for added wall strength and integrity. Each support includes a heavy–duty brass grommet for anchoring the berm under high wind conditions. Anchoring stakes not included. Sidewalls lower quickly for easy drive–in and out. Portable design folds down quickly for storage and transport. Optional tarps, ground mats, track mats or track runners are available to provide extra resistance against rocky surfaces or heavy in–out traffic use. Helps comply with EPA for containment and spill prevention (SPCC). Note: the difference between the Rigid–Lock QuickBerm® Plus and the standard Rigid–Lock QuickBerm® is the durability of the PVC–coated fabric. The Plus version is thicker and more durable for more frequent drive–in or –out applications. The standard QuickBerm® is better suited for infrequent drive–in or —out scenarios, pedestrian traffic and for placing heavy materials within the working space. SPECIFICATIONS1,435 gal. Sump Capacity - 92 lbs1 berm12' x 16' x 1'

Justrite Rigid-Lock QuickBerm, 12' x 20' x 1' $2,288.00

Manufacturer: Justrite, Manufacturer Part Number: 28526Rigid–Lock QuickBerm® Safe, drive–in spill containment for drums, IBC totes, and tanks! Single–piece construction — patented Rigid–Lock wall–support system integral to berm provides unobstructed work space. Quick and easy setup — no assembly required. Durable modified PVC–coated fabric withstands long–term UV exposure — great for outdoor use. Ergonomic design provides 100% inside berm accessibility with an unobstructed side–to–side floor space for vehicle tires, foot traffic and cleaning. The patented Rigid–Lock wall–support design protects personnel against trips and falls when walking along the outside perimeter. Built–in stainless steel wall supports lock the sidewalls in a 12–in (305–mm) high, 90° vertical position. The Rigid–Lock QuickBerm® offers immediate, secure deployment and no–worry, spill–readiness. Like the QuickBerm® Plus the standard QuickBerm® withstands a broad range of chemicals including petroleum, oils, grease and most acids — durable enough for extended wear. Exceptionally strong structural integrity includes a reinforced CriticalCorner™ design featuring wraparound diagonal radio frequency welds to prevent billowing, unwrapping or sagging of the corners during full containment for fluid–tight reliability. Walls include a 1–in (25–mm) fray–resistant finished hem along the top rim for added wall strength and integrity. Each support includes a heavy–duty brass grommet for anchoring the berm under high wind conditions. Anchoring stakes not included. Sidewalls lower quickly for easy drive–in and out. Portable design folds down quickly for storage and transport. Optional tarps, ground mats, track mats or track runners are available to provide extra resistance against rocky surfaces or heavy in–out traffic use. Helps comply with EPA for containment and spill prevention (SPCC). Note: the difference between the Rigid–Lock QuickBerm® Plus and the standard Rigid–Lock QuickBerm® is the durability of the PVC–coated fabric. The Plus version is thicker and more durable for more frequent drive–in or –out applications. The standard QuickBerm® is better suited for infrequent drive–in or —out scenarios, pedestrian traffic and for placing heavy materials within the working space. SPECIFICATIONS1,795 gal. Sump Capacity - 110 lbs1 berm12' x 20' x 1'

Justrite Rigid-Lock QuickBerm, 16' x 16' x 1' $2,496.00

Manufacturer: Justrite, Manufacturer Part Number: 28528Rigid–Lock QuickBerm® Safe, drive–in spill containment for drums, IBC totes, and tanks! Single–piece construction — patented Rigid–Lock wall–support system integral to berm provides unobstructed work space. Quick and easy setup — no assembly required. Durable modified PVC–coated fabric withstands long–term UV exposure — great for outdoor use. Ergonomic design provides 100% inside berm accessibility with an unobstructed side–to–side floor space for vehicle tires, foot traffic and cleaning. The patented Rigid–Lock wall–support design protects personnel against trips and falls when walking along the outside perimeter. Built–in stainless steel wall supports lock the sidewalls in a 12–in (305–mm) high, 90° vertical position. The Rigid–Lock QuickBerm® offers immediate, secure deployment and no–worry, spill–readiness. Like the QuickBerm® Plus the standard QuickBerm® withstands a broad range of chemicals including petroleum, oils, grease and most acids — durable enough for extended wear. Exceptionally strong structural integrity includes a reinforced CriticalCorner™ design featuring wraparound diagonal radio frequency welds to prevent billowing, unwrapping or sagging of the corners during full containment for fluid–tight reliability. Walls include a 1–in (25–mm) fray–resistant finished hem along the top rim for added wall strength and integrity. Each support includes a heavy–duty brass grommet for anchoring the berm under high wind conditions. Anchoring stakes not included. Sidewalls lower quickly for easy drive–in and out. Portable design folds down quickly for storage and transport. Optional tarps, ground mats, track mats or track runners are available to provide extra resistance against rocky surfaces or heavy in–out traffic use. Helps comply with EPA for containment and spill prevention (SPCC). Note: the difference between the Rigid–Lock QuickBerm® Plus and the standard Rigid–Lock QuickBerm® is the durability of the PVC–coated fabric. The Plus version is thicker and more durable for more frequent drive–in or –out applications. The standard QuickBerm® is better suited for infrequent drive–in or —out scenarios, pedestrian traffic and for placing heavy materials within the working space. SPECIFICATIONS1,910 gal. Sump Capacity - 115 lbs1 berm16' x 16' x 1'

Justrite Rigid-Lock QuickBerm, 16' x 20' x 1' $2,704.00

Manufacturer: Justrite, Manufacturer Part Number: 28530Rigid–Lock QuickBerm® Safe, drive–in spill containment for drums, IBC totes, and tanks! Single–piece construction — patented Rigid–Lock wall–support system integral to berm provides unobstructed work space. Quick and easy setup — no assembly required. Durable modified PVC–coated fabric withstands long–term UV exposure — great for outdoor use. Ergonomic design provides 100% inside berm accessibility with an unobstructed side–to–side floor space for vehicle tires, foot traffic and cleaning. The patented Rigid–Lock wall–support design protects personnel against trips and falls when walking along the outside perimeter. Built–in stainless steel wall supports lock the sidewalls in a 12–in (305–mm) high, 90° vertical position. The Rigid–Lock QuickBerm® offers immediate, secure deployment and no–worry, spill–readiness. Like the QuickBerm® Plus the standard QuickBerm® withstands a broad range of chemicals including petroleum, oils, grease and most acids — durable enough for extended wear. Exceptionally strong structural integrity includes a reinforced CriticalCorner™ design featuring wraparound diagonal radio frequency welds to prevent billowing, unwrapping or sagging of the corners during full containment for fluid–tight reliability. Walls include a 1–in (25–mm) fray–resistant finished hem along the top rim for added wall strength and integrity. Each support includes a heavy–duty brass grommet for anchoring the berm under high wind conditions. Anchoring stakes not included. Sidewalls lower quickly for easy drive–in and out. Portable design folds down quickly for storage and transport. Optional tarps, ground mats, track mats or track runners are available to provide extra resistance against rocky surfaces or heavy in–out traffic use. Helps comply with EPA for containment and spill prevention (SPCC). Note: the difference between the Rigid–Lock QuickBerm® Plus and the standard Rigid–Lock QuickBerm® is the durability of the PVC–coated fabric. The Plus version is thicker and more durable for more frequent drive–in or –out applications. The standard QuickBerm® is better suited for infrequent drive–in or —out scenarios, pedestrian traffic and for placing heavy materials within the working space. SPECIFICATIONS2,390 gal. Sump Capacity - 135 lbs1 berm16' x 20' x 1'

Justrite Rigid-Lock QuickBerm, 20' x 20' x 1' $3,224.00

Manufacturer: Justrite, Manufacturer Part Number: 28532Rigid–Lock QuickBerm® Safe, drive–in spill containment for drums, IBC totes, and tanks! Single–piece construction — patented Rigid–Lock wall–support system integral to berm provides unobstructed work space. Quick and easy setup — no assembly required. Durable modified PVC–coated fabric withstands long–term UV exposure — great for outdoor use. Ergonomic design provides 100% inside berm accessibility with an unobstructed side–to–side floor space for vehicle tires, foot traffic and cleaning. The patented Rigid–Lock wall–support design protects personnel against trips and falls when walking along the outside perimeter. Built–in stainless steel wall supports lock the sidewalls in a 12–in (305–mm) high, 90° vertical position. The Rigid–Lock QuickBerm® offers immediate, secure deployment and no–worry, spill–readiness. Like the QuickBerm® Plus the standard QuickBerm® withstands a broad range of chemicals including petroleum, oils, grease and most acids — durable enough for extended wear. Exceptionally strong structural integrity includes a reinforced CriticalCorner™ design featuring wraparound diagonal radio frequency welds to prevent billowing, unwrapping or sagging of the corners during full containment for fluid–tight reliability. Walls include a 1–in (25–mm) fray–resistant finished hem along the top rim for added wall strength and integrity. Each support includes a heavy–duty brass grommet for anchoring the berm under high wind conditions. Anchoring stakes not included. Sidewalls lower quickly for easy drive–in and out. Portable design folds down quickly for storage and transport. Optional tarps, ground mats, track mats or track runners are available to provide extra resistance against rocky surfaces or heavy in–out traffic use. Helps comply with EPA for containment and spill prevention (SPCC). Note: the difference between the Rigid–Lock QuickBerm® Plus and the standard Rigid–Lock QuickBerm® is the durability of the PVC–coated fabric. The Plus version is thicker and more durable for more frequent drive–in or –out applications. The standard QuickBerm® is better suited for infrequent drive–in or —out scenarios, pedestrian traffic and for placing heavy materials within the working space. SPECIFICATIONS2,990 gal. Sump Capacity - 160 lbs1 berm20' x 20' x 1'

Justrite Rigid-Lock QuickBerm, 6' x 8' x 1' $1,112.80

Manufacturer: Justrite, Manufacturer Part Number: 28516Rigid–Lock QuickBerm® Safe, drive–in spill containment for drums, IBC totes, and tanks! Single–piece construction — patented Rigid–Lock wall–support system integral to berm provides unobstructed work space. Quick and easy setup — no assembly required. Durable modified PVC–coated fabric withstands long–term UV exposure — great for outdoor use. Ergonomic design provides 100% inside berm accessibility with an unobstructed side–to–side floor space for vehicle tires, foot traffic and cleaning. The patented Rigid–Lock wall–support design protects personnel against trips and falls when walking along the outside perimeter. Built–in stainless steel wall supports lock the sidewalls in a 12–in (305–mm) high, 90° vertical position. The Rigid–Lock QuickBerm® offers immediate, secure deployment and no–worry, spill–readiness. Like the QuickBerm® Plus the standard QuickBerm® withstands a broad range of chemicals including petroleum, oils, grease and most acids — durable enough for extended wear. Exceptionally strong structural integrity includes a reinforced CriticalCorner™ design featuring wraparound diagonal radio frequency welds to prevent billowing, unwrapping or sagging of the corners during full containment for fluid–tight reliability. Walls include a 1–in (25–mm) fray–resistant finished hem along the top rim for added wall strength and integrity. Each support includes a heavy–duty brass grommet for anchoring the berm under high wind conditions. Anchoring stakes not included. Sidewalls lower quickly for easy drive–in and out. Portable design folds down quickly for storage and transport. Optional tarps, ground mats, track mats or track runners are available to provide extra resistance against rocky surfaces or heavy in–out traffic use. Helps comply with EPA for containment and spill prevention (SPCC). Note: the difference between the Rigid–Lock QuickBerm® Plus and the standard Rigid–Lock QuickBerm® is the durability of the PVC–coated fabric. The Plus version is thicker and more durable for more frequent drive–in or –out applications. The standard QuickBerm® is better suited for infrequent drive–in or —out scenarios, pedestrian traffic and for placing heavy materials within the working space.SPECIFICATIONS355 gal. Sump Capacity - 38 lbs1 berm6' x 8' x 1'

Justrite Rigid-Lock QuickBerm, 8' x 8' x 1' $1,248.00

Manufacturer: Justrite, Manufacturer Part Number: 28518RigidLock QuickBerm ® Safe, drivein spill containment for drums, IBC totes, and tanks! Singlepiece construction â€” patented RigidLock wallsupport system integral to berm provides unobstructed work space. Quick and easy setup â€” no assembly required. Durable modified PVCcoated fabric withstands longterm UV exposure â€” great for outdoor use. Ergonomic design provides 100% inside berm accessibility with an unobstructed sidetoside floor space for vehicle tires, foot traffic and cleaning. The patented RigidLock wallsupport design protects personnel against trips and falls when walking along the outside perimeter. Builtin stainless steel wall supports lock the sidewalls in a 12in (305mm) high, 90 ° vertical position. The RigidLock QuickBerm ® offers immediate, secure deployment and noworry, spillreadiness. Like the QuickBerm ® Plus the standard QuickBerm ® withstands a broad range of chemicals including petroleum, oils, grease and most acids â€” durable enough for extended wear. Exceptionally strong structural integrity includes a reinforced CriticalCornerâ„¢ design featuring wraparound diagonal radio frequency welds to prevent billowing, unwrapping or sagging of the corners during full containment for fluidtight reliability. Walls include a 1in (25mm) frayresistant finished hem along the top rim for added wall strength and integrity. Each support includes a heavyduty brass grommet for anchoring the berm under high wind conditions. Anchoring stakes not included. Sidewalls lower quickly for easy drivein and out. Portable design folds down quickly for storage and transport. Optional tarps, ground mats, track mats or track runners are available to provide extra resistance against rocky surfaces or heavy inout traffic use. Helps comply with EPA for containment and spill prevention (SPCC). Note: the difference between the RigidLock QuickBerm ® Plus and the standard RigidLock QuickBerm ® is the durability of the PVCcoated fabric. The Plus version is thicker and more durable for more frequent drivein or out applications. The standard QuickBerm ® is better suited for infrequent drivein or â€”out scenarios, pedestrian traffic and for placing heavy materials within the working space.SPECIFICATIONS475 gal. Sump Capacity - 45 lbs1 berm8' x 8' x 1'

Justrite Self-Closing Funnel w/Check Valve, 32" Non-Sparking Brass Tube $1,122.00

Manufacturer: Justrite, Manufacturer Part Number: 8205 & 8214Keeping a Lid on Hazardous Vapors! Large 10 3/4” powder–coated steel funnels permit safe, rapid filling of 30– and 55–gallon drums. Can be used with flammable, non–flammable and viscous liquids. Hinged cover contains a fusible link that melts at 165°F, snapping the lid closed in case of fire. Available with or without a self–closing check valve. The self–closing check valve minimizes vapor emissions and prevents spillage if the drum is accidentally tipped over. Includes a separate brass vent adapter which fits into the 3/4" drum bung to provide pressure and vacuum–relief protection. Funnels with 6” brass flame arresters handle most needs while the funnel with a 32” brass flame arrester provides greater liquid flow. For viscous flammable or non–flammable liquids choose the funnel with a 33” non–sparking brass tube. All funnels comply with EPA and OSHA regulations and are FM approved.SPECIFICATIONS25 lbs.1 funnel w/check valve32" Non-Sparking Brass Tube

Justrite SHELVING, 16 DRUM LOCKER $2,369.00

Manufacturer: Justrite, Manufacturer Part Number: 915105Galvanized steel shelving. Two–tier of shelves, including mounting brackets. Movable, 16–in wide with 2–in lip. For 16–drum lockers. Back wall only. (May limit the ability to load locker to full drum capacity. Not available on locker models with explosion relief panels.)

Justrite SHELVING, 2-4 DRUM LOCKER $1,167.25

Manufacturer: Justrite, Manufacturer Part Number: 915101Galvanized steel shelving. Two–tier of shelves, including mounting brackets. Movable, 16–in wide with 2–in lip. For 2– and 4–drum lockers. Back wall only. (May limit the ability to load locker to full drum capacity. Not available on locker models with explosion relief panels.)

Justrite SHELVING, 6-9-12 DRUM LOCKER $1,781.90

Manufacturer: Justrite, Manufacturer Part Number: 915103Galvanized steel shelving. Two–tier of shelves, including mounting brackets. Movable, 16–in wide with 2–in lip. For 6–, 9– and 12–drum lockers. Back wall only. (May limit the ability to load locker to full drum capacity. Not available on locker models with explosion relief panels.)

Justrite Smoker Bucket Liner Master Pack $1,093.95

Manufacturer: Justrite, Manufacturer Part Number: 26830Special laminated aluminum/poly liner makes cigarette butt disposal cleaner and easier than ever! Once the burn–resistant liner is full, simply use included twist–tie to close and discard. No need to "shake out" nasty butts and ash. Fits any bucket 11–3/4" (298mm) wide x 10" (254mm) high maximum size. When used with Justrite's Elite&QUOT; or Original styled Smokers Cease Fire smoking receptacles, the system is FM approved.

Justrite Tip-Over Kit Only - No Funnel $1,122.00

Manufacturer: Justrite, Manufacturer Part Number: 8214Drum Funnel has wide–mouth opening with hinged, stay–open lid. Built–in flame arrester on most models to prevent fire intrusion. Galvanized steel with durable epoxy powder coat finish. Self–closing in case of fire. Wide–mouth funnels are a must when transferring liquids into the relatively small 2" bung on a 30– or 55–gallon drum. Justrite offers funnels with superior safety features that make them ideal for use with solvent, thinner, oil and paint wastes. Heavy 18–gauge galvanized steel with electrostatically applied epoxy powder coat paint provides durability and chemical resistance. All funnels comply with EPA and OSHA regulations and are FM approved. Larger funnels accept a lock to prevent unauthorized access. Funnels intended for use with flammables are fitted with a brass flame arrester that absorbs and dissipates heat, preventing any external ignition source (like sparks from power tools, static electricity or cigarettes) from reaching the drum's flammable contents.

Justrite Washdown QuickBerm, 10' x 11' x 4" $3,520.00

Manufacturer: Justrite, Manufacturer Part Number: 28576Washdown QuickBerm® Portable drive–through station captures contaminated water from vehicle and construction equipment wash down. Wash down dirty equipment and recapture water for reclamation. Drain fitting offers an easy way to redirect liquids. Drive over endwalls without losing liquids. Durable vinyl–coated material reinforced with radio frequency–welded, high–visibility yellow runway strips that withstand drive–thru traffic, including backhoes and skid steers. Removable 4–in (102–mm) diameter foam inserts support sidewalls while 2–in H x 8–in W (51 x 203–mm) planks (not included) slide into pockets to keep end walls elevated preventing wastewater from escaping during drive–over. Simply remove foam inserts to fold material for quick and compact storage. Two 1–in NPT fittings on each side of the berm for drainage. Brass grommets around perimeter provide the ability to securely anchor berm during use. Anchor stakes not included. Helps comply with EPA for stormwater regulations.SPECIFICATIONS250 gal. Sump Capacity - 155 lbs1 berm10' x 11' x 4"

Justrite Washdown QuickBerm, 10' x 18' x 4" $3,630.00

Manufacturer: Justrite, Manufacturer Part Number: 28578Washdown QuickBerm® Portable drive–through station captures contaminated water from vehicle and construction equipment wash down. Wash down dirty equipment and recapture water for reclamation. Drain fitting offers an easy way to redirect liquids. Drive over endwalls without losing liquids. Durable vinyl–coated material reinforced with radio frequency–welded, high–visibility yellow runway strips that withstand drive–thru traffic, including backhoes and skid steers. Removable 4–in (102–mm) diameter foam inserts support sidewalls while 2–in H x 8–in W (51 x 203–mm) planks (not included) slide into pockets to keep end walls elevated preventing wastewater from escaping during drive–over. Simply remove foam inserts to fold material for quick and compact storage. Two 1–in NPT fittings on each side of the berm for drainage. Brass grommets around perimeter provide the ability to securely anchor berm during use. Anchor stakes not included. Helps comply with EPA for stormwater regulations. SPECIFICATIONS425 gal. Sump Capacity - 164 lbs1 berm10' x 18' x 4"

Justrite Washdown QuickBerm, 12' x 26' x 4" $5,280.00

Manufacturer: Justrite, Manufacturer Part Number: 28579Washdown QuickBerm® Portable drive–through station captures contaminated water from vehicle and construction equipment wash down. Wash down dirty equipment and recapture water for reclamation. Drain fitting offers an easy way to redirect liquids. Drive over endwalls without losing liquids. Durable vinyl–coated material reinforced with radio frequency–welded, high–visibility yellow runway strips that withstand drive–thru traffic, including backhoes and skid steers. Removable 4–in (102–mm) diameter foam inserts support sidewalls while 2–in H x 8–in W (51 x 203–mm) planks (not included) slide into pockets to keep end walls elevated preventing wastewater from escaping during drive–over. Simply remove foam inserts to fold material for quick and compact storage. Two 1–in NPT fittings on each side of the berm for drainage. Brass grommets around perimeter provide the ability to securely anchor berm during use. Anchor stakes not included. Helps comply with EPA for stormwater regulations. SPECIFICATIONS750 gal. Sump Capacity - 240 lbs1 berm12' x 26' x 4"

Justrite Washdown QuickBerm, 14' x 54' x 4" $7,700.00

Manufacturer: Justrite, Manufacturer Part Number: 28581Washdown QuickBerm® Portable drive–through station captures contaminated water from vehicle and construction equipment wash down. Wash down dirty equipment and recapture water for reclamation. Drain fitting offers an easy way to redirect liquids. Drive over endwalls without losing liquids. Durable vinyl–coated material reinforced with radio frequency–welded, high–visibility yellow runway strips that withstand drive–thru traffic, including backhoes and skid steers. Removable 4–in (102–mm) diameter foam inserts support sidewalls while 2–in H x 8–in W (51 x 203–mm) planks (not included) slide into pockets to keep end walls elevated preventing wastewater from escaping during drive–over. Simply remove foam inserts to fold material for quick and compact storage. Two 1–in NPT fittings on each side of the berm for drainage. Brass grommets around perimeter provide the ability to securely anchor berm during use. Anchor stakes not included. Helps comply with EPA for stormwater regulations.SPECIFICATIONS1,800 gal. Sump Capacity - 325 lbs1 berm14' x 54' x 4"

Find anything you need