Drum Accessories

Manufacturer: Wizard Drum, Manufacturer Part Number: 10025This compact, portable, self–propelled model moves itself around the drum automatically and makes an inside chime cut leaving a safe burr–free edge. It is quiet, easy to use and clears all bungs. Will dehead most drums in less than 1 minute. It uses a 1/8 HP, 115V, 60 HZ single phase DC motor, (AC rectified), and is supplied with a tangle–resistant cord. This deheader will work with 30–55 gallon steel drums that are from 16–20 gauge in thickness. Designed for low to moderate steel drum volume (20–50 drums per week).SPECIFICATIONS26 lbs.1 deheader12" L x 10" W x 24" H

Manufacturer: Wizard Drum, Manufacturer Part Number: 3995Model J opener (blue) cuts the drum shell BELOW the chime. This model was designed for drum disposal because it removes the entire drum head. Removing both top and bottom heads of a drum makes it easy to flatten or crush the drum, store it and later sell it for scrap. This deheader does not leave a burr–free edge. Comes with a non–ferrous cutting wheel.

Manufacturer: Wizard Drum, Manufacturer Part Number: 11463Superior quality fiber drum dechimers remove metal chimes from fiber drums. With chimes removed, fiber material can be sold or converted to energy or flattened to reduce storage space and simplify handling. Works on all types and sizes of fiber drums. Removes top and bottom chimes in less than two minutes. High strength aluminum and rugged tool steel construction.

Manufacturer: Wizard Drum, Manufacturer Part Number: 3150-3153The Wizard Drum Deheading Tower keeps the drum deheader hanging to prevent accidents or cause injury to the operator. The cord is held clear of the operator by the power cord support arm, and a 360–degree electric or air swivel connector prevents the cord from tangling. It also alleviates the strain on the operator. Ring and Legs ship separately. Shipping dimensions for the ring are 33" x 33" x 4" and it weighs 24 lbs.

Manufacturer: Wizard Drum, Manufacturer Part Number: 3150-3152The Wizard Drum Deheading Tower keeps the drum deheader hanging to prevent accidents or cause injury to the operator. The cord is held clear of the operator by the power cord support arm, and a 360–degree electric or air swivel connector prevents the cord from tangling. It also alleviates the strain on the operator. Ring and Legs ship separately. Shipping dimensions for the ring are 33" x 33" x 4" and it weighs 24 lbs.

Manufacturer: Wizard Drum, Manufacturer Part Number: 3980Model J opener (blue) cuts the drum shell BELOW the chime. This model was designed for drum disposal because it removes the entire drum head. Removing both top and bottom heads of a drum makes it easy to flatten or crush the drum, store it and later sell it for scrap. This deheader does not leave a burr–free edge. Comes with a standard steel cutting wheel.

Manufacturer: Wizard Drum, Manufacturer Part Number: 3902The Model G opener (yellow) cuts on the INSIDE of the drum chime and leaves a smooth, burr–free edge for safe handling. This versatile model is considered a general purpose opener because opened drums can either be used for utility containers or sold for scrap. This model has a small, 1–1/2" diameter cutter wheel that travels between the chime and bung fittings as it cuts. It is designed to open standard, 30–55 gallon industrial drums of up to 16–gauge steel with either flat or round chime. Comes with a non–ferrous cutting wheel.

Manufacturer: Wizard Drum, Manufacturer Part Number: 3978The Model G opener (yellow) cuts on the INSIDE of the drum chime and leaves a smooth, burr–free edge for safe handling. This versatile model is considered a general purpose opener because opened drums can either be used for utility containers or sold for scrap. This model has a small, 1–1/2" diameter cutter wheel that travels between the chime and bung fittings as it cuts. It is designed to open standard, 30–55 gallon industrial drums of up to 16–gauge steel with either flat or round chime. Comes with a standard steel cutting wheel.

Manufacturer: Wizard Drum, Manufacturer Part Number: 3931Model J opener (blue) cuts the drum shell BELOW the chime. This model was designed for drum disposal because it removes the entire drum head. Removing both top and bottom heads of a drum makes it easy to flatten or crush the drum, store it and later sell it for scrap. This deheader does not leave a burr–free edge. Comes with a standard steel cutting wheel.

Manufacturer: Wizard Drum, Manufacturer Part Number: 3938Model J opener (blue) cuts the drum shell BELOW the chime. This model was designed for drum disposal because it removes the entire drum head. Removing both top and bottom heads of a drum makes it easy to flatten or crush the drum, store it and later sell it for scrap. This deheader does not leave a burr–free edge.

Manufacturer: Wizard Drum, Manufacturer Part Number: 3962Model J opener (blue) cuts the drum shell BELOW the chime. This model was designed for drum disposal because it removes the entire drum head. Removing both top and bottom heads of a drum makes it easy to flatten or crush the drum, store it and later sell it for scrap. This deheader does not leave a burr–free edge. Comes with a non–ferrous cutting wheel.

Manufacturer: Wizard Drum, Manufacturer Part Number: 3949The Model G opener (yellow) cuts on the INSIDE of the drum chime and leaves a smooth, burr–free edge for safe handling. This versatile model is considered a general purpose opener because opened drums can either be used for utility containers or sold for scrap. This model has a small, 1–1/2" diameter cutter wheel that travels between the chime and bung fittings as it cuts. It is designed to open standard, 30–55 gallon industrial drums of up to 16–gauge steel with either flat or round chime. Comes with standard steel cutting wheel.

Manufacturer: Wizard Drum, Manufacturer Part Number: 3950The Model G opener (yellow) cuts on the INSIDE of the drum chime and leaves a smooth, burr–free edge for safe handling. This versatile model is considered a general purpose opener because opened drums can either be used for utility containers or sold for scrap. This model has a small, 1–1/2" diameter cutter wheel that travels between the chime and bung fittings as it cuts. It is designed to open standard, 30–55 gallon industrial drums of up to 16–gauge steel with either flat or round chime. Comes with a non–ferrous cutting wheel.

Manufacturer: Wizard Drum, Manufacturer Part Number: 10095This compact, portable Ratchet action manual deheader requires minimal effort. The only manual drum deheader to leave a completely safe burr–free edge. Can be used left or right handed. Ideal for use in areas with no available power source. This deheader will work with 30–55 gallon steel drums that are from 16–20 gauge in thickness. Will dehead most drums in less than two minutes. Ideal for low to moderate steel drum volume (10–25 drums per week). Optional non–ferrous cutter wheel minimizes sparking potential.SPECIFICATIONS19 lbs.1 deheader12" L x 7" W x 18" H

Manufacturer: Wizard Drum, Manufacturer Part Number: 121The Bung Wrench easily and safely opens all known styles of U.S. and foreign–made drum bungs. Ductile iron and non–ferrous style are available. They are made with heavy–duty construction for long–life usage and have an 18" angled handle for excellent leverage.

Manufacturer: Wizard Drum, Manufacturer Part Number: 120The Bung Wrench easily and safely opens all known styles of U.S. and foreign–made drum bungs. Ductile iron and non–ferrous style are available. They are made with heavy–duty construction for long–life usage and have an 18" angled handle for excellent leverage.

Manufacturer: Wizard Drum, Manufacturer Part Number: 24646The top–off is Wizard�s most economical deheader. The ratchet–style handle provides for better leverage on the drum and is specifically designed to dehead 5 drums a week. Can remove tops and bottoms of all 30–55 gallon drums. Inside chime cut is appropriate for nearly all industrial applications.