Warehouse and Dock Equipment

Manufacturer: Vestil, Manufacturer Part Number: FF-C-12The three speed Commercial Floor Fan has a rotary switch and a permanently lubricated motor. Meets OSHA standards and is UL listed. These floor fans do not have a totally enclosed motor. They should be used in clean and dry commercial application.

Manufacturer: Vestil, Manufacturer Part Number: IOH-230VOptional Immersion Oil Heater for cold weather applications with a built in metal reservoir thermostat for automatic heat control. 28-23V single or three (3) phase power, 25 watts. This unit can only be used in steel tanks.

Manufacturer: Vestil, Manufacturer Part Number: ICRF-30-POThe Oscillating two speed, ball bearing, Industrial Duty Circulator fan is totally enclosed and permanently lubricated. Pull chain switch. Meets OSHA standards and is ETL & C/UL listed.

Manufacturer: Vestil, Manufacturer Part Number: IOH-460VOptional cold weather application with a built in metal reservoir thermostat for automatic heat control. 46V three (3) phase power unit, 5 watts. This unit can only be used in steel tanks.

Manufacturer: Vestil, Manufacturer Part Number: ICRF-24-WOThe Oscillating two speed, ball bearing, Industrial Duty Circulator fan is totally enclosed and permanently lubricated. Pull chain switch. Meets OSHA standards and is ETL & C/UL listed.

Manufacturer: Vestil, Manufacturer Part Number: HPCR-30-PThe two speed, ball bearing High Performance Circulator Fan is totally enclosed and permanently lubricated. Pull chain switch. Meets OSHA standards and is ETL & C/UL listed.

Manufacturer: Vestil, Manufacturer Part Number: ICRF-24-POThe Oscillating two speed, ball bearing, Industrial Duty Circulator fan is totally enclosed and permanently lubricated. Pull chain switch. Meets OSHA standards and is ETL & C/UL listed.

Manufacturer: Vestil, Manufacturer Part Number: DDB-36The two speed, ball bearing Direct Drive Portable Blower has a totally enclosed motor and spiral wire front and rear guards. Rocker switch. Meets OSHA standards. ETL & C/UL listed.

Manufacturer: Vestil, Manufacturer Part Number: SME-24Blade Diameter: 24", Motor HP: 1/4, AMPS High: 2.5, CFM High: 6,800, CFM Low: 5,000 – Shutter Mounted Exhaust Fans – Inside–building installation only with vents outside. Eliminate need for external framing and shutter. This shutter mounted exhaust fan is ideally suited for thin wall buildings. 24-inch exhaust fan units are 120V, 1 phase totally enclosed and permanently lubricated. Pull chain switch. No cord. Junction box provided for direct wiring. Meets OSHA standards and is UL listed.

Manufacturer: Vestil, Manufacturer Part Number: SME-30Blade Diameter: 30", Motor HP: 1/4, AMPS High: 2.7, CFM High: 7,900, CFM Low: 6,000 – Shutter Mounted Exhaust Fans – Inside–building installation only with vents outside. Eliminate need for external framing and shutter. Ideally suited for thin wall buildings. Units are 120V, 1 phase totally enclosed and permanently lubricated. Pull chain switch. No cord. Junction box provided for direct wiring. Meets OSHA standards and is UL listed.

Manufacturer: Wesco, Manufacturer Part Number: 2723297 gauge wall mount standard. 18" two speed UL approved fan accessory. 60" Long Arm. Arm ships in separate box; 34" x 8" x 3.5". KIT: 60" ARM W/FAN SALES. Steel Construction. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Wesco, Manufacturer Part Number: 272328Model #: 202108. 7 gauge wall mount standard. 18" two speed UL approved fan accessory. 40" Long Arm. Arm ships in separate box; 28" x 6" x 4.5". KIT: 40" ARM W/FAN SALES. Steel Construction. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Vestil, Manufacturer Part Number: PES-64-SOOptional 6/4 SO Power Cord.

Manufacturer: Vestil, Manufacturer Part Number: ICRF-30-PThe two speed, ball bearing, Industrial Duty Circulator fan is totally enclosed and permanently lubricated. Pull chain switch. Meets OSHA standards and is ETL & C/UL listed.

Manufacturer: Vestil, Manufacturer Part Number: MB-RS-C-36The Commercial Direct Drive Stationary Blower has a two speed, ball bearing motor that is permanently lubricated. Rotary switch is standard. Meets OSHA standards and is UL listed. The blower does not have a totally enclosed motor. Blower should be used in a clean and dry commercial application.

Manufacturer: Vestil, Manufacturer Part Number: MB-C-30The Commercial Direct Drive Swivel Blower has a two speed, ball bearing motor that is permanently lubricated. Rocker switch is standard. Meets OSHA standards and is UL listed. The blower does not have a totally enclosed motor. Blower should be used in a clean and dry commercial application.

Manufacturer: Vestil, Manufacturer Part Number: ICRF-24-PThe two speed, ball bearing, Industrial Duty Circulator fan is totally enclosed and permanently lubricated. Pull chain switch. Meets OSHA standards and is ETL & C/UL listed.

Manufacturer: Vestil, Manufacturer Part Number: ICRF-30-WThe two speed, ball bearing, Industrial Duty Circulator fan is totally enclosed and permanently lubricated. Pull chain switch. Meets OSHA standards and is ETL & C/UL listed.

Manufacturer: Vestil, Manufacturer Part Number: ICRF-24-WThe two speed, ball bearing, Industrial Duty Circulator fan is totally enclosed and permanently lubricated. Pull chain switch. Meets OSHA standards and is ETL & C/UL listed.

Manufacturer: Vestil, Manufacturer Part Number: VCH-57CWatts: 3,000, Volts: 240, Phase: 1, BTU's: 10,240 – Quartz Infrared Spot Heaters – Keep your cooler work areas well heated with these Infrared Heaters. The Quartz tube radiates a blanket of heat in a 60° symmetrical pattern. Unit includes; bright aluminum reflector and end caps, mounting chains, S–hooks and a cordset with plug. Units can be hung from the ceiling with mounting chains or surface mounted. Built–in brackets used in surface mounting allow up to a 45° horizontal tilt adjustment.

Manufacturer: Vestil, Manufacturer Part Number: SME-18Blade Diameter: 18", Motor HP: 1/8, AMPS High: 2.2, CFM High: 5,750, CFM Medium: 4,700, CFM Low: 3,200 – Shutter Mounted Exhaust Fans – Inside–building installation only with vents outside. Eliminate need for external framing and shutter. Ideally suited for thin wall buildings. Units are 120V, 1 phase totally enclosed and permanently lubricated. Pull chain switch. No cord. Junction box provided for direct wiring. Meets OSHA standards and is UL listed.

Manufacturer: Vestil, Manufacturer Part Number: VCH-46CWatts: 1500, Volts: 120, Phase: 1, BTU's: 5,120 – Quartz Infrared Spot Heaters – Keep your cooler work areas well heated with these Infrared Heaters. The Quartz tube radiates a blanket of heat in a 60° symmetrical pattern. Unit includes; bright aluminum reflector and end caps, mounting chains, S–hooks and a cordset with plug. Units can be hung from the ceiling with mounting chains or surface mounted. Built–in brackets used in surface mounting allow up to a 45° horizontal tilt adjustment.

Manufacturer: Vestil, Manufacturer Part Number: HPCR-30-IBlade Diameter: 30", Mounting Style: I–Beam, Amps High: 3.4, CFM High: 8200, CFM Low: 6200 – High Performance Circulator Fan – Two speed, 120V, 1 phase, ball bearing, totally enclosed and permanently lubricated Industrial Duty Circulator Fan. Pull chain switch with a 12 foot long cord and an SJT type 3 conductor. Oscillating models available, contact factory. Several mounting styles available. Meets OSHA standards and is UL listed. 1/3 HP electric motor.

Manufacturer: Vestil, Manufacturer Part Number: HPCR-30-WBlade Diameter: 30", Mounting Style: Wall, Amps High: 3.4, CFM High: 8200, CFM Low: 6200 – High Performance Circulator Fan – Two speed, 120V, 1 phase, ball bearing, totally enclosed and permanently lubricated Industrial Duty Circulator Fan. Pull chain switch with a 12 foot long cord and an SJT type 3 conductor. Oscillating models available, contact factory. Several mounting styles available. Meets OSHA standards and is UL listed. 1/3 HP electric motor.