Warehouse and Dock Equipment

Manufacturer: Vestil, Manufacturer Part Number: CJ-BEAM-SNTrailer Stabilizing Jacks are used to prevent up-ending semi-trailers when they are not connected to a tractor during loading and unloading operations. Also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. Flush-type zerk fitting for lubricating ACME screw. Powder coat safety yellow finish. Includes reflective collar for visibility at night.

Manufacturer: Vestil, Manufacturer Part Number: CJ-BEAM-PNTrailer Stabilizing Jacks are used to prevent up-ending semi-trailers when they are not connected to a tractor during loading and unloading operations. Also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. Flush-type zerk fitting for lubricating ACME screw. Powder coat safety yellow finish. Includes reflective collar for visibility at night.

Manufacturer: Vestil, Manufacturer Part Number: SP-TOP-R-100Uniform Static Capacity (lbs.): 100000, Uniform Lifting Capacity (lbs.): 50,000, Service Range Minimum (in.): 39, Service Range Max (in.): 51, Wheel Size (in.): 10, Wheel Type: Hard Rubber, Top Cap Diameter (in.): 8 – The Trailer Stabilizing Jack is used to prevent up–ending semi–trailers when they are not connected to a tractor during loading and unloading operations. It is also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. It's made of high strength steel construction with a flush–type zerk fitting for lubricating ACME screw. Meets OSHA regulations when used with wheel chocks. Contains a powder coat safety yellow finish that includes a reflective collar for visibility at night.

Manufacturer: Vestil, Manufacturer Part Number: BFSJ-2748-100Jacks are used to prevent up–ending semi–trailers when they are not connected to a tractor during loading and unloading operations. Also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. High strength steel construction. Flush–type zerk fitting for lubricating ACME screw. Meets OSHA regulations when used with wheel chocks. Powder coat safety yellow finish. Includes reflective collar for visibility at night. SPECIFICATIONSService Range: 39.5" to 51"100,000 lbs Static Capacity, 50,000 lbs Lifting Capacity35.375" x 48" x 39.5" - 125 lbs.

Manufacturer: Vestil, Manufacturer Part Number: SP-TOP-BEAM-100Uniform Static Capacity (lbs.): 100000, Uniform Lifting Capacity (lbs.): 50,000, Service Range Minimum (in.): 40, Service Range Max (in.): 51, Wheel Size (in.): 10, Wheel Type: Hard Rubber – The Trailer Stabilizing Jack is used to prevent up–ending semi–trailers when they are not connected to a tractor during loading and unloading operations. It is also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. It's made of high strength steel construction with a flush–type zerk fitting for lubricating ACME screw. Meets OSHA regulations when used with wheel chocks. Contains a powder coat safety yellow finish that includes a reflective collar for visibility at night.

Manufacturer: Vestil, Manufacturer Part Number: MMJ-10The Mechanical Machinery Jack is good for repairing vehicles, lifting trucks, railway maintenance, construction, mining, and agriculture. Compact design with collapsible lever offers easy operation and simple maintenance. A self locking, anti-kickback operating lever reduces injuries. Standard features include: folding handle, two carrying handles and a large base plate. Lifting and lowering speed is controllable. No seals to leak. Will not drift down even after an extended period of time. MFG Part# MMJ-10

Manufacturer: Vestil, Manufacturer Part Number: SP-TOP-100Uniform Static Capacity (lbs.): 100000, Uniform Lifting Capacity (lbs.): 50,000, Service Range Minimum (in.): 39–1/2, Service Range Max (in.): 51, Wheel Size (in.): 10, Wheel Type: Hard Rubber, Top Cap Diameter (in.): 8 – The Trailer Stabilizing Jack is used to prevent up–ending semi–trailers when they are not connected to a tractor during loading and unloading operations. It is also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. It's made of high strength steel construction with a flush–type zerk fitting for lubricating ACME screw. Meets OSHA regulations when used with wheel chocks. Contains a powder coat safety yellow finish that includes a reflective collar for visibility at night.

Manufacturer: Vestil, Manufacturer Part Number: WL-100-8-68Capacity: 8,000 lbs., Platform Size: 72" x 96", Lowered Height: 10", Raised Height: 70", Overall Frame Size: 62" x 93" – Electric–Hydraulic Scissor Dock – Save time and reduce man–hours where there are no docks. Pit or surface mount with the optional approach ramp. Engineered and designed for maximum safety and efficiency. Checkered plate deck is made of heavy gauge steel for years of use. Hydraulic cylinders feature emergency velocity fuse if line breaks. Complete with upper travel limit switch and overload relief valve. Push–button control is 24V AC on a 20 foot long coil cord. Prewired control box includes magnetic starter and overload fuse. High visibility removable handrails with fixed toeboards are standard. Includes beveled toe–guards and electric toe–guards around perimeter of platform. External 6.5 HP 208–230/460V, 3–phase, 60 Hz motor may be located up to 8 feet away from lift. OSHA and ANSI compliant.

Manufacturer: Vestil, Manufacturer Part Number: LO-J-125Uniform Static Capacity (lbs.): 125000, Uniform Lifting Capacity (lbs.): 50,000, Service Range Minimum (in.): 39, Service Range Max (in.): 51, Wheel Size (in.): 10, Wheel Type: Hard Rubber, Top Cap Diameter (in.): 8 – The Trailer Stabilizing Jack is used to prevent up–ending semi–trailers when they are not connected to a tractor during loading and unloading operations. It is also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. This Jack is made of high strength steel construction with a flush–type zerk fitting for lubricating ACME screw. Meets OSHA regulations when used with wheel chocks. Contains a powder coat safety yellow finish that includes a reflective collar for visibility at night.

Manufacturer: Vestil, Manufacturer Part Number: H-LO-J-BEAMStatic Capacity: 100,000 lbs., Lifting Capacity: 40,000 lbs. Service Range: 41" to 47", Wheel Size &Type: 10" hard rubber/3" steel – Trailer Stabilizing Jack – Jacks are used to prevent up–ending semi–trailers when they are not connected to a tractor during loading and unloading operations. Also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. High strength steel construction. Flush–type zerk fitting for lubricating.

Manufacturer: Vestil, Manufacturer Part Number: HI-JJacks are used to prevent up–ending semi–trailers when they are not connected to a tractor during loading and unloading operations. Also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. High strength steel construction. Flush–type zerk fitting for lubricating ACME screw. Meets OSHA regulations when used with wheel chocks. Powder coat safety yellow finish. Includes reflective collar for visibility at night.SPECIFICATIONSService Range: 45" to 57"100,000 lbs Static Capacity, 40,000 lbs. Lifting Capacity27.625" x 24" x 45" - 115 lbs.

Manufacturer: Vestil, Manufacturer Part Number: SP-TOP-RJacks are used to prevent up–ending semi–trailers when they are not connected to a tractor during loading and unloading operations. Also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. High strength steel construction. Flush–type zerk fitting for lubricating ACME screw. Meets OSHA regulations when used with wheel chocks. Powder coat safety yellow finish. Includes reflective collar for visibility at night.SPECIFICATIONSService Range: 41" to 50"100,000 lbs Static Capacity, 40,000 lbs. Lifting Capacity20.563" x 14" x 41" - 115 lbs.

Manufacturer: Vestil, Manufacturer Part Number: SP-TOPTrailer Stabilizing Jacks are used to prevent up-ending semi-trailers when they are not connected to a tractor during loading and unloading operations. Also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. Flush-type zerk fitting for lubricating ACME screw. Powder coat safety yellow finish. Includes reflective collar for visibility at night.

Manufacturer: Vestil, Manufacturer Part Number: HI-J-100Jacks are used to prevent up–ending semi–trailers when they are not connected to a tractor during loading and unloading operations. Also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. High strength steel construction. Flush–type zerk fitting for lubricating ACME screw. Meets OSHA regulations when used with wheel chocks. Powder coat safety yellow finish. Includes reflective collar for visibility at night.SPECIFICATIONSService Range: 45" to 57"100,000 lbs Static Capacity, 50,000 lbs Lifting Capacity27.625" x 24" x 45" - 133 lbs.

Manufacturer: Vestil, Manufacturer Part Number: LO-J-BEAMThe Trailer Stabilizing Jack is used to prevent up-ending semi-trailers when they are not connected to a tractor during loading and unloading operations. It is also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. This Jack is made of high strength steel construction with a flush-type zerk fitting for lubricating ACME screw. Meets OSHA regulations when used with wheel chocks. Contains a powder coat safety yellow finish that includes a reflective collar for visibility at night.

Manufacturer: Vestil, Manufacturer Part Number: LO-J-BEAM-100Jacks are used to prevent up–ending semi–trailers when they are not connected to a tractor during loading and unloading operations. Also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. High strength steel construction. Flush–type zerk fitting for lubricating ACME screw. Meets OSHA regulations when used with wheel chocks. Powder coat safety yellow finish. Includes reflective collar for visibility at night.SPECIFICATIONSService Range: 39.5" to 51"100,000 lbs Static Capacity, 50,000 lbs Lifting Capacity27.625" x 24" x 39.5" - 180 lbs.

Manufacturer: Vestil, Manufacturer Part Number: LO-J-100Jacks are used to prevent up–ending semi–trailers when they are not connected to a tractor during loading and unloading operations. Also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. High strength steel construction. Flush–type zerk fitting for lubricating ACME screw. Meets OSHA regulations when used with wheel chocks. Powder coat safety yellow finish. Includes reflective collar for visibility at night.SPECIFICATIONSService Range: 39.5" to 51"100,000 lbs Static Capacity, 50,000 lbs Lifting Capacity27.625" x 24" x 39.5" - 128 lbs.

Manufacturer: Vestil, Manufacturer Part Number: MSJ-20The Mechanical Screw Jack is ideal for the manufacturing and maintenance industries. The design allows for an impacting surface area which creates more stability. The steel construction enables the product to be strong and durable. The included handle is removable. MFG Part# MSJ-10

Manufacturer: Vestil, Manufacturer Part Number: MSJ-10The Mechanical Screw Jack is ideal for the manufacturing and maintenance industries. The design allows for an impacting surface area which creates more stability. The steel construction enables the product to be strong and durable. The included handle is removable. MFG Part# MSJ-10

Manufacturer: Vestil, Manufacturer Part Number: MMJ-6The Mechanical Machinery Jack is good for repairing vehicles, lifting trucks, railway maintenance, construction, mining, and agriculture. Compact design with collapsible lever offers easy operation and simple maintenance. A self locking, anti-kickback operating lever reduces injuries. Standard features include: folding handle, two carrying handles and a large base plate. Lifting and lowering speed is controllable. No seals to leak. Will not drift down even after an extended period of time. MFG Part# MMJ-3

Manufacturer: Vestil, Manufacturer Part Number: CJ-BEAM-RHDLThe optional ratchet handle is a great addition to the beam jacks. A smooth finish provides easy handling when in use. The lightweight and compact design provides simple storage when not in use. MFG Part# CJ-BEAM-RHDL

Manufacturer: Vestil, Manufacturer Part Number: SJ-40Trailer Stabilizing Jacks are used to prevent up-ending semi-trailers when they are not connected to a tractor during loading and unloading operations. Also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. High strength steel construction. Flush-type zerk fitting for lubricating ACME screw. Meets OSHA regulations when used with wheel chocks. Powder coat safety yellow finish. Includes reflective collar for visibility at night.

Manufacturer: Vestil, Manufacturer Part Number: WL-100-6-78Capacity: 6,000 lbs., Platform Size: 84" x 96", Lowered Height: 10", Raised Height: 70", Overall Frame Size: 62" x 93" – Electric–Hydraulic Scissor Dock – Save time and reduce man–hours where there are no docks. Pit or surface mount with the optional approach ramp. Engineered and designed for maximum safety and efficiency. Checkered plate deck is made of heavy gauge steel for years of use. Hydraulic cylinders feature emergency velocity fuse if line breaks. Complete with upper travel limit switch and overload relief valve. Push–button control is 24V AC on a 20 foot long coil cord. Prewired control box includes magnetic starter and overload fuse. High visibility removable handrails with fixed toeboards are standard. Includes beveled toe–guards and electric toe–guards around perimeter of platform. External 6.5 HP 208–230/460V, 3–phase, 60 Hz motor may be located up to 8 feet away from lift. OSHA and ANSI compliant.

Manufacturer: Vestil, Manufacturer Part Number: SJ-35-2HJacks are used to prevent up–ending semi–trailers when they are not connected to a tractor during loading and unloading operations. Also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. High strength steel construction. Flush–type zerk fitting for lubricating ACME screw. Meets OSHA regulations when used with wheel chocks. Powder coat safety yellow finish. Includes reflective collar for visibility at night.SPECIFICATIONSService Range: 44" to 51"50,000 lbs Static Capacity, 5,000 lbs Lifting Capacity16" x 16" x 44" - 43 lbs.