Warehouse and Dock Equipment

Manufacturer: Vestil, Manufacturer Part Number: LTS-ETThe Optional smooth pivoting motion enables driver to turn seat thirty (3) degrees left or right of center position. The swivel system can be incorporated with air suspension system for total driver ergonomics.

Manufacturer: Vestil, Manufacturer Part Number: FRS-6-12Insert the loop at the tip of the fork and slide it up at a 45 ° angle. Then, lay it down over the existing forks. Load pallets into the rear of trailer conveniently and easily. Practical for pushing pallets two or three deep into a trailer.

Manufacturer: Vestil, Manufacturer Part Number: FRS-5-12Insert the loop at the tip of the fork and slide it up at a 45 ° angle. Then, lay it down over the existing forks. Load pallets into the rear of trailer conveniently and easily. Practical for pushing pallets two or three deep into a trailer.

Manufacturer: Vestil, Manufacturer Part Number: FCB-818Overall Size: 8"W x 18"H – Forklift Carriage Bumper – Protect loads from potential damage with our Fork Truck Carriage Bumper. Simply bolt to forklift carriage with included hardware.

Manufacturer: Vestil, Manufacturer Part Number: FF-C-12The three speed Commercial Floor Fan has a rotary switch and a permanently lubricated motor. Meets OSHA standards and is UL listed. These floor fans do not have a totally enclosed motor. They should be used in clean and dry commercial application.

Manufacturer: Vestil, Manufacturer Part Number: WSF-12The three speed Work Station Fan is totally enclosed and permanently lubricated motor. Mount with on bolt or lag screw to walls, ceilings, work benches, machines or any surface. Pull chain switch. Meets OSHA standards and is ETL & C/UL listed.

Manufacturer: Vestil, Manufacturer Part Number: FF-C-20The three speed Commercial Floor Fan has a rotary switch and a permanently lubricated motor. Meets OSHA standards and is UL listed. These floor fans do not have a totally enclosed motor. They should be used in clean and dry commercial application.

Manufacturer: Vestil, Manufacturer Part Number: PES-124-SOOptional 12/4 SO Power Cord.

Manufacturer: Vestil, Manufacturer Part Number: LLF-18Optional fan with mounting brackets and power cord for the dock loading lights.

Manufacturer: Wesco, Manufacturer Part Number: 272240Model #: 274304. Spring–loaded pushup socket for easy bulb changing. 7 gauge wall mount standard. Use with incandescent lamps only: PAR–38: up to 150W. R40: up to 300W. 40" long extended arm. DOCK LIGHT: 40" EXTENDED LENGTH. Steel Construction. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Wesco, Manufacturer Part Number: 272224Spring–loaded pushup socket for easy bulb changing. 7 gauge wall mount standard. Use with incandescent lamps only: PAR–38: up to 150W. R40: up to 300W. 24" long extended arm. DOCK LIGHT: 24" EXTENDED LENGTH. Steel Construction. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Wesco, Manufacturer Part Number: 272260Model #: 89072. Spring–loaded pushup socket for easy bulb changing. 7 gauge wall mount standard. Use with incandescent lamps only: PAR–38: up to 150W. R40: up to 300W. 60" long extended arm. DOCK LIGHT: 60" EXTENDED LENGTH. Steel Construction. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Vestil, Manufacturer Part Number: LL-24A Dock Loading Light minimize freight damage while expediting loading and unloading operations. Designed to provide uniform visibility inside trailers or around dock areas. Offer good color, low replacement cost and turn on instantly even in cold environments. It utilizes a ninety (90) watt bulb, sold separately. Adjustable arm knuckle joint allows vertical and horizontal positioning. Made for dry locations and is UL listed. MFG Part# LL-24

Manufacturer: Vestil, Manufacturer Part Number: LL-SAI-24A Dock Loading Light minimize freight damage while expediting loading and unloading operations. Designed to provide uniform visibility inside trailers or around dock areas. Offer good color, low replacement cost and turn on instantly even in cold environments. It utilizes a 300 watt bulb (not included). Made for dry locations and is ETL C/U.S listed. MFG Part# LL-SAI-24

Manufacturer: Vestil, Manufacturer Part Number: EALUM-7-HChock Depth (in.): 10, Chock Width (in.): 7, Chock Height (in.): 8 – The Aluminum Wheel Chock with handle is extruded lightweight aluminum that is easy to handle.

Manufacturer: Vestil, Manufacturer Part Number: FRC-2Rail Chocks fit most standard size rails. Double sided flanges keep chocks on track. Hardened steel spurs, located on the bottom side of the chock, are used to maximize a positive grip. Handle projection 36" on flag chocks, 10" on non–flag chocks. Handle height is 14". The adjustable support legs are used to balance the Flag Rail Chocks. The Aluminum "Chock Your Wheels" sign is visible from both sides. Chain length is 30" on combo units. Steel construction.SPECIFICATIONS36" x 10" x 14" - 10 lbs.

Manufacturer: Vestil, Manufacturer Part Number: EALUM-7-HSChock Depth (in.): 10, Chock Width (in.): 7, Chock Height (in.): 8 – The Aluminum Wheel Chock with handle is extruded lightweight aluminum that is easy to handle. This unit includes a safety sign.

Manufacturer: Vestil, Manufacturer Part Number: SRC/FRCDouble Rail Chocks fit most standard size rails. Double sided flanges keep chocks on track. Hardened steel spurs, located on the bottom side of the chock, are used to maximize a positive grip. Handle projection 36" on flag chocks, 10" on non–flag chocks. Handle height is 14". The adjustable support legs are used to balance the Flag Rail Chocks. The Aluminum "Chock Your Wheels" sign is visible from both sides. Metal wheel chocks have a chain length of 30" on combo units. Steel construction.SPECIFICATIONS36" x 10" x 14" - 18 lbs.

Manufacturer: Vestil, Manufacturer Part Number: CWS-13Chock Depth (in.): 10–1/2, Chock Width (in.): 7, Chock Height (in.): 8 – The Aluminum Wheel Chock with flag is extruded lightweight aluminum that is easy to handle.

Manufacturer: Vestil, Manufacturer Part Number: R-CAD-KITOptional pair of weld-on brackets (steel or aluminum).

Manufacturer: Checkers, Manufacturer Part Number: UC1400-4.5-PResistant to oils, fuels, and solvents. Easy-grip carrying handle. Eyebolt for ropes or chains. Length: 10 in. (25.4 cm), Width: 8.5 in. (21.6 cm), Height: 5 in. (12.7 cm). Weight: 9.5 lb. (4.3 kg) per pair. Color: Orange, 1 Pair. Pairs attached with a 48 in. long piece of 5/8 in. polyester rope.

Manufacturer: Checkers, Manufacturer Part Number: UC1600-PResistant to oils, fuels, and solvents. Recessed carrying handle. Mounting hole for ropes or chains. Length: 11.5 in. (29.24 cm), Width: 9 in. (22.9 cm), Height: 8.5 in. (21.6 cm). Weight: 7.5 lb. (3.4 kg) per pair. Color: Orange, 1 Pair. Pairs attached with a 48 in. long piece of 5/8 in. polyester rope.

Manufacturer: Checkers, Manufacturer Part Number: UC1400-6-PResistant to oils, fuels, and solvents. Easy-grip carrying handle. Eyebolt for ropes or chains. Length: 10 in. (25.4 cm), Width: 8.5 in. (21.6 cm), Height: 5 in. (12.7 cm). Weight: 12.5 lb. (5.7 kg) per pair. Color: Orange, 1 Pair. Pairs attached with a 48 in. long piece of 5/8 in. polyester rope.

Manufacturer: Checkers, Manufacturer Part Number: UC14HM~Rugged construction. ~Durable zinc-plated finish. ~Mounting hardware is NOT included. ~11.85 in X 10.25 in. X 4.75 in., Weight: 2.75 lb. (1.2 kg).