Tables, Benches and Platforms

Manufacturer: Durham, Manufacturer Part Number: WBF-TH-30120-95120" wide, 14 gauge, folding leg workbench, tempered hard surface, 1 top shelf, 2000 lbs. capacity, gray Mfg Part#: WBF-TH-30120-95

Manufacturer: Durham, Manufacturer Part Number: WBF-TH-36120-95120" wide, 14 gauge, folding leg workbench, tempered hard surface, 1 top shelf, 2000 lbs. capacity, gray Mfg Part#: WBF-TH-36120-95

Manufacturer: Durham, Manufacturer Part Number: DWB-3072-BE-RSR-9572 wide, 12 gauge, heavy duty workbench, 10 hook-on bins, 2 shelves, 4000 lbs. capacity, riser, electrical strip, lips up, gray Mfg Part#: DWB-3072-BE-RSR-95

Manufacturer: Durham, Manufacturer Part Number: WBF-48120-95120" wide, 14 gauge, folding leg workbench, 1 top shelf, 2000 lbs. capacity, gray Mfg Part#: WBF-48120-95

Manufacturer: Durham, Manufacturer Part Number: HWB-3672-9572 wide, 12 gauge, heavy duty workbench, 2 shelves, 14000 lbs. capacity, lips down, gray Mfg Part#: HWB-3672-95

Manufacturer: Pucel, Manufacturer Part Number: 3060Each set consists of two side stops and one back stop. Constructed of 12 gauge steel.

Manufacturer: Pucel, Manufacturer Part Number: PWB-6036These height adjustable benches accommodate all welding processes: MIG, TIG, GMAW, SMAW, FCAW, GTAW, & brazing. Complete removable steel grating. Adjusts from 30" to 42" high to meet the needs of any welder. Convenient pull out tray for easy slag and debris removal. Constructed of all–welded 12 ga. steel with 10 ga. steel legs. No assembly required.

Manufacturer: Pucel, Manufacturer Part Number: HS-3472-3For handling extremely heavy load requirements. All shelves are flat. All models 36" high. Shelves are 12 gauge steel. 3/16" heavy–duty steel angle used. 3,000–lbs capacity. Comes with 3 shelves with a 10–5/8" clearance.

Manufacturer: Little Giant, Manufacturer Part Number: RS3-2D-2436-LLAll welded 12 gauge construction offers superior strength and durability. Three point latching system keeps contents secure. Top surface is enclosed on three sides and a flush front edge. Comes with a center shelf. The writing surface height can be adjusted from 39–1/2" – 42–1/2" above the floor. Riser measures 10" deep and is 12" above the writing surface to clear most 3 ring binders. Dimensions: 24" x 36".

Manufacturer: Little Giant, Manufacturer Part Number: WTC-2D-3048-LL1-3/4” butcher block top provides a durable, yet forgiving work surface. The nonconductive butcher block top is securely attached to the all-welded, heavy-duty, 14 gauge steel cabinet. Features a keyed handle with a 3-point locking mechanism. 26” high interior cabinet clearance. Fully assembled and ready for immediate use. Available in stationary or mobile version.

Manufacturer: Little Giant, Manufacturer Part Number: WTC2D2436-6PYBK1-3/4” butcher block top provides a durable, yet forgiving work surface. The nonconductive butcher block top is securely attached to the all-welded, heavy-duty, 14 gauge steel cabinet. Features a keyed handle with a 3-point locking mechanism. 26” high interior cabinet clearance. Fully assembled and ready for immediate use. Available in stationary or mobile version.

Manufacturer: Little Giant, Manufacturer Part Number: WSTC-3048All-welded, heavy-duty 12 gauge steel construction. Keyed handle with secure 3-point locking system locks doors at the top, center, and bottom. Doors swing open a full 180 degrees to allow complete access. Durable powder coated gray finish. Ships set up and ready for immediate use.

Manufacturer: Little Giant, Manufacturer Part Number: WTC-2D-2448-LL1-3/4” butcher block top provides a durable, yet forgiving work surface. The nonconductive butcher block top is securely attached to the all-welded, heavy-duty, 14 gauge steel cabinet. Features a keyed handle with a 3-point locking mechanism. 26” high interior cabinet clearance. Fully assembled and ready for immediate use. Available in stationary or mobile version.

Manufacturer: Little Giant, Manufacturer Part Number: WTC2D24362R6PFL1-3/4” butcher block top provides a durable, yet forgiving work surface. The nonconductive butcher block top is securely attached to the all-welded, heavy-duty, 14 gauge steel cabinet. Features a keyed handle with a 3-point locking mechanism. 26” high interior cabinet clearance. Fully assembled and ready for immediate use. Available in stationary or mobile version.

Manufacturer: Little Giant, Manufacturer Part Number: WTC-2D-2436-LL1-3/4” butcher block top provides a durable, yet forgiving work surface. The nonconductive butcher block top is securely attached to the all-welded, heavy-duty, 14 gauge steel cabinet. Features a keyed handle with a 3-point locking mechanism. 26” high interior cabinet clearance. Fully assembled and ready for immediate use. Available in stationary or mobile version.

Manufacturer: Little Giant, Manufacturer Part Number: WSTC-3060All-welded, heavy-duty 12 gauge steel construction. Keyed handle with secure 3-point locking system locks doors at the top, center, and bottom. Doors swing open a full 180 degrees to allow complete access. Durable powder coated gray finish. Ships set up and ready for immediate use.

Manufacturer: Little Giant, Manufacturer Part Number: WSTC2-2448All-welded, heavy-duty 12 gauge steel construction. Keyed handle with secure 3-point locking system locks doors at the top, center, and bottom. Doors swing open a full 180 degrees to allow complete access. Durable powder coated gray finish. Ships set up and ready for immediate use.

Manufacturer: Little Giant, Manufacturer Part Number: WSTC-2448All-welded, heavy-duty 12 gauge steel construction. Keyed handle with secure 3-point locking system locks doors at the top, center, and bottom. Doors swing open a full 180 degrees to allow complete access. Durable powder coated gray finish. Ships set up and ready for immediate use.

Manufacturer: Little Giant, Manufacturer Part Number: WSTC2-3048All-welded, heavy-duty 12 gauge steel construction. Keyed handle with secure 3-point locking system locks doors at the top, center, and bottom. Doors swing open a full 180 degrees to allow complete access. Durable powder coated gray finish. Ships set up and ready for immediate use.

Manufacturer: Little Giant, Manufacturer Part Number: WW3672-8PHFLMove these Heavy-Duty Workbenches easily with two swivel and two rigid phenolic casters. When in the desired position, engage the floor lock between the swivel casters to avoid unwanted movement. 7 gauge reinforced steel top with rounded comfort edges. Heavy 2" x 2" angle legs are 1/4" thick with 7 gauge welded gussets. Includes 6" or 8" phenolic casters and floor lock.

Manufacturer: Little Giant, Manufacturer Part Number: WW3660-8PHFLMove these Heavy-Duty Workbenches easily with two swivel and two rigid phenolic casters. When in the desired position, engage the floor lock between the swivel casters to avoid unwanted movement. 7 gauge reinforced steel top with rounded comfort edges. Heavy 2" x 2" angle legs are 1/4" thick with 7 gauge welded gussets. Includes 6" or 8" phenolic casters and floor lock.

Manufacturer: Little Giant, Manufacturer Part Number: WW3072-6PHFLMove these Heavy-Duty Workbenches easily with two swivel and two rigid phenolic casters. When in the desired position, engage the floor lock between the swivel casters to avoid unwanted movement. 7 gauge reinforced steel top with rounded comfort edges. Heavy 2" x 2" angle legs are 1/4" thick with 7 gauge welded gussets. Includes 6" or 8" phenolic casters and floor lock.

Manufacturer: Little Giant, Manufacturer Part Number: WW3072-8PHFLMove these Heavy-Duty Workbenches easily with two swivel and two rigid phenolic casters. When in the desired position, engage the floor lock between the swivel casters to avoid unwanted movement. 7 gauge reinforced steel top with rounded comfort edges. Heavy 2" x 2" angle legs are 1/4" thick with 7 gauge welded gussets. Includes 6" or 8" phenolic casters and floor lock.

Manufacturer: Little Giant, Manufacturer Part Number: WW3060-HD-6PHFLMove these Heavy Duty Workbenches easily with two swivel and two rigid 6" x 2" phenolic casters. When in the desired position, engage the floor lock between the swivel casters to avoid unwanted movement. 7 gauge reinforced steel top with rounded comfort edges. Heavy 2" x 2" angle legs are 1/4" thick with 7 gauge welded gussets. Workbench comes with a 26"W x 20"D x 6"H (Center Mount) drawer with padlock hasp. All models have 34" Bench Top height. Capacity: 3,600–lbs. Dimensions: 30" x 60".