Spill Containment

Manufacturer: UltraTech, Manufacturer Part Number: 1125 New Ultra–Modular IBC SpillPallets provide low cost spill containment for multiple IBC tanks. Standard offerings include: 2–tank, 3–tank, 4–tank and 5–tank indoor and outdoor models. In addition, components may be purchased separately to allow users to "build–your–own" configurations for indoor models. Each IBC tank sits on a heavy–duty spill pallet that offers a Uniformly Distributed Load Capacity of 9,000 lbs. Each of the low profile spill pallets has a containment capacity of 75–gallons and measures 62" L x 62" W x 8.75" H. To increase containment capacity, a 65–gallon capacity Expansion Tank is available. "Flow–through" bulkhead fittings (1.25–inch diameter) are used to connect Spill Pallets and Expansion Tanks together. This patented feature allows spills to be channeled throughout the containment system, thereby "borrowing" containment capacity from adjacent Spill Pallets and Expansion Tanks. Any number of the modular spill pallets can be connected together with the bulkhead fittings. Two (2) bulkhead fittings are used to connect one pallet to the next. Connecting an Expansion Tank to a Spill Pallet also requires two (2) bulkhead fittings. Bulkhead fittings are included with each 2–, 3–, 4–, or 5–tank model. Once five (5) or more Spill Pallets are connected together, the total containment capacity is 375 gallons minimum and does not require use of an Expansion Tank to meet the spill containment regulations. Ultra–Modular IBC SpillPallets are constructed of 100% polyethylene, eliminating the potential for rust and corrosion. They offer excellent chemical resistance to a broad range of chemicals including acids, solvents and oils. Indoor Models help facilities comply with newly–revised SPCC (Spill Prevention, Control and Countermeasures) Regulations, EPA Container Storage Regulation 40 CFR 264.175, 264.177(c) and 265.177(c). Outdoor Models comply with these regulations and Stormwater Management Regulations (NPDES). Outdoor Models are considered a "Best Management Practice" (BMP) for providing effective stormwater management. You will need to purchase one (1) UT–1118–0001, Assembly Kit, with each order. The order size does not matter – you will just need one (1) UT–1118–0001 per order. The Assembly kit is reusable for assembling any number of units. SPECIFICATIONS18,000 lbs. Load Bearing Capacity (9,000 lbs. per side), 280 gal. Sump Capacity - 310 lbs.2 pallets with 2 expansion tanks186" L x 62" W x 8.75" H

Manufacturer: UltraTech, Manufacturer Part Number: 1165 New Ultra–Modular IBC SpillPallets provide low cost spill containment for multiple IBC tanks. Standard offerings include: 2–tank, 3–tank, 4–tank and 5–tank indoor and outdoor models. In addition, components may be purchased separately to allow users to "build–your–own" configurations for indoor models. Each IBC tank sits on a heavy–duty spill pallet that offers a Uniformly Distributed Load Capacity of 9,000 lbs. Each of the low profile spill pallets has a containment capacity of 75–gallons and measures 62" L x 62" W x 8.75" H. To increase containment capacity, a 65–gallon capacity Expansion Tank is available. "Flow–through" bulkhead fittings (1.25–inch diameter) are used to connect Spill Pallets and Expansion Tanks together. This patented feature allows spills to be channeled throughout the containment system, thereby "borrowing" containment capacity from adjacent Spill Pallets and Expansion Tanks. Any number of the modular spill pallets can be connected together with the bulkhead fittings. Two (2) bulkhead fittings are used to connect one pallet to the next. Connecting an Expansion Tank to a Spill Pallet also requires two (2) bulkhead fittings. Bulkhead fittings are included with each 2–, 3–, 4–, or 5–tank model. Once five (5) or more Spill Pallets are connected together, the total containment capacity is 375 gallons minimum and does not require use of an Expansion Tank to meet the spill containment regulations. Ultra–Modular IBC SpillPallets are constructed of 100% polyethylene, eliminating the potential for rust and corrosion. They offer excellent chemical resistance to a broad range of chemicals including acids, solvents and oils. Indoor Models help facilities comply with newly–revised SPCC (Spill Prevention, Control and Countermeasures) Regulations, EPA Container Storage Regulation 40 CFR 264.175, 264.177(c) and 265.177(c). Outdoor Models comply with these regulations and Stormwater Management Regulations (NPDES). Outdoor Models are considered a "Best Management Practice" (BMP) for providing effective stormwater management. You will need to purchase one (1) UT–1118–0001, Assembly Kit, with each order. The order size does not matter – you will just need one (1) UT–1118–0001 per order. The Assembly kit is reusable for assembling any number of units. SPECIFICATIONS18,000 lbs. Load Bearing Capacity (9,000 lbs. per side), 280 gal. Sump Capacity - 881 lbs.2 pallets with 2 expansion tanks126" L x 93" W x 79" H

Manufacturer: UltraTech, Manufacturer Part Number: 1126 New Ultra–Modular IBC SpillPallets provide low cost spill containment for multiple IBC tanks. Standard offerings include: 2–tank, 3–tank, 4–tank and 5–tank indoor and outdoor models. In addition, components may be purchased separately to allow users to "build–your–own" configurations for indoor models. Each IBC tank sits on a heavy–duty spill pallet that offers a Uniformly Distributed Load Capacity of 9,000 lbs. Each of the low profile spill pallets has a containment capacity of 75–gallons and measures 62" L x 62" W x 8.75" H. To increase containment capacity, a 65–gallon capacity Expansion Tank is available. "Flow–through" bulkhead fittings (1.25–inch diameter) are used to connect Spill Pallets and Expansion Tanks together. This patented feature allows spills to be channeled throughout the containment system, thereby "borrowing" containment capacity from adjacent Spill Pallets and Expansion Tanks. Any number of the modular spill pallets can be connected together with the bulkhead fittings. Two (2) bulkhead fittings are used to connect one pallet to the next. Connecting an Expansion Tank to a Spill Pallet also requires two (2) bulkhead fittings. Bulkhead fittings are included with each 2–, 3–, 4–, or 5–tank model. Once five (5) or more Spill Pallets are connected together, the total containment capacity is 375 gallons minimum and does not require use of an Expansion Tank to meet the spill containment regulations. Ultra–Modular IBC SpillPallets are constructed of 100% polyethylene, eliminating the potential for rust and corrosion. They offer excellent chemical resistance to a broad range of chemicals including acids, solvents and oils. Indoor Models help facilities comply with newly–revised SPCC (Spill Prevention, Control and Countermeasures) Regulations, EPA Container Storage Regulation 40 CFR 264.175, 264.177(c) and 265.177(c). Outdoor Models comply with these regulations and Stormwater Management Regulations (NPDES). Outdoor Models are considered a "Best Management Practice" (BMP) for providing effective stormwater management. You will need to purchase one (1) UT–1118–0001, Assembly Kit, with each order. The order size does not matter – you will just need one (1) UT–1118–0001 per order. The Assembly kit is reusable for assembling any number of units. SPECIFICATIONS27,000 lbs. Load Bearing Capacity (9,000 lbs. per side), 355 gal. Sump Capacity - 435 lbs.3 pallets with 2 expansion tanks248" L x 62" W x 8.75" H

Manufacturer: UltraTech, Manufacturer Part Number: 1166 New Ultra–Modular IBC SpillPallets provide low cost spill containment for multiple IBC tanks. Standard offerings include: 2–tank, 3–tank, 4–tank and 5–tank indoor and outdoor models. In addition, components may be purchased separately to allow users to "build–your–own" configurations for indoor models. Each IBC tank sits on a heavy–duty spill pallet that offers a Uniformly Distributed Load Capacity of 9,000 lbs. Each of the low profile spill pallets has a containment capacity of 75–gallons and measures 62" L x 62" W x 8.75" H. To increase containment capacity, a 65–gallon capacity Expansion Tank is available. "Flow–through" bulkhead fittings (1.25–inch diameter) are used to connect Spill Pallets and Expansion Tanks together. This patented feature allows spills to be channeled throughout the containment system, thereby "borrowing" containment capacity from adjacent Spill Pallets and Expansion Tanks. Any number of the modular spill pallets can be connected together with the bulkhead fittings. Two (2) bulkhead fittings are used to connect one pallet to the next. Connecting an Expansion Tank to a Spill Pallet also requires two (2) bulkhead fittings. Bulkhead fittings are included with each 2–, 3–, 4–, or 5–tank model. Once five (5) or more Spill Pallets are connected together, the total containment capacity is 375 gallons minimum and does not require use of an Expansion Tank to meet the spill containment regulations. Ultra–Modular IBC SpillPallets are constructed of 100% polyethylene, eliminating the potential for rust and corrosion. They offer excellent chemical resistance to a broad range of chemicals including acids, solvents and oils. Indoor Models help facilities comply with newly–revised SPCC (Spill Prevention, Control and Countermeasures) Regulations, EPA Container Storage Regulation 40 CFR 264.175, 264.177(c) and 265.177(c). Outdoor Models comply with these regulations and Stormwater Management Regulations (NPDES). Outdoor Models are considered a "Best Management Practice" (BMP) for providing effective stormwater management. You will need to purchase one (1) UT–1118–0001, Assembly Kit, with each order. The order size does not matter – you will just need one (1) UT–1118–0001 per order. The Assembly kit is reusable for assembling any number of units. SPECIFICATIONS27,000 lbs. Load Bearing Capacity (9,000 lbs. per side), 355 gal. Sump Capacity - 1,258 lbs.3 pallets with 2 expansion tanks188" L x 93" W x 79" H

Manufacturer: UltraTech, Manufacturer Part Number: 1127 New Ultra–Modular IBC SpillPallets provide low cost spill containment for multiple IBC tanks. Standard offerings include: 2–tank, 3–tank, 4–tank and 5–tank indoor and outdoor models. In addition, components may be purchased separately to allow users to "build–your–own" configurations for indoor models. Each IBC tank sits on a heavy–duty spill pallet that offers a Uniformly Distributed Load Capacity of 9,000 lbs. Each of the low profile spill pallets has a containment capacity of 75–gallons and measures 62" L x 62" W x 8.75" H. To increase containment capacity, a 65–gallon capacity Expansion Tank is available. "Flow–through" bulkhead fittings (1.25–inch diameter) are used to connect Spill Pallets and Expansion Tanks together. This patented feature allows spills to be channeled throughout the containment system, thereby "borrowing" containment capacity from adjacent Spill Pallets and Expansion Tanks. Any number of the modular spill pallets can be connected together with the bulkhead fittings. Two (2) bulkhead fittings are used to connect one pallet to the next. Connecting an Expansion Tank to a Spill Pallet also requires two (2) bulkhead fittings. Bulkhead fittings are included with each 2–, 3–, 4–, or 5–tank model. Once five (5) or more Spill Pallets are connected together, the total containment capacity is 375 gallons minimum and does not require use of an Expansion Tank to meet the spill containment regulations. Ultra–Modular IBC SpillPallets are constructed of 100% polyethylene, eliminating the potential for rust and corrosion. They offer excellent chemical resistance to a broad range of chemicals including acids, solvents and oils. Indoor Models help facilities comply with newly–revised SPCC (Spill Prevention, Control and Countermeasures) Regulations, EPA Container Storage Regulation 40 CFR 264.175, 264.177(c) and 265.177(c). Outdoor Models comply with these regulations and Stormwater Management Regulations (NPDES). Outdoor Models are considered a "Best Management Practice" (BMP) for providing effective stormwater management. You will need to purchase one (1) UT–1118–0001, Assembly Kit, with each order. The order size does not matter – you will just need one (1) UT–1118–0001 per order. The Assembly kit is reusable for assembling any number of units. SPECIFICATIONS36,000 lbs. Load Bearing Capacity (9,000 lbs. per side), 365 gal. Sump Capacity - 531 lbs.4 pallets with 1 expansion tank279" L x 62" W x 8.75" H

Manufacturer: UltraTech, Manufacturer Part Number: 1167 New Ultra–Modular IBC SpillPallets provide low cost spill containment for multiple IBC tanks. Standard offerings include: 2–tank, 3–tank, 4–tank and 5–tank indoor and outdoor models. In addition, components may be purchased separately to allow users to "build–your–own" configurations for indoor models. Each IBC tank sits on a heavy–duty spill pallet that offers a Uniformly Distributed Load Capacity of 9,000 lbs. Each of the low profile spill pallets has a containment capacity of 75–gallons and measures 62" L x 62" W x 8.75" H. To increase containment capacity, a 65–gallon capacity Expansion Tank is available. "Flow–through" bulkhead fittings (1.25–inch diameter) are used to connect Spill Pallets and Expansion Tanks together. This patented feature allows spills to be channeled throughout the containment system, thereby "borrowing" containment capacity from adjacent Spill Pallets and Expansion Tanks. Any number of the modular spill pallets can be connected together with the bulkhead fittings. Two (2) bulkhead fittings are used to connect one pallet to the next. Connecting an Expansion Tank to a Spill Pallet also requires two (2) bulkhead fittings. Bulkhead fittings are included with each 2–, 3–, 4–, or 5–tank model. Once five (5) or more Spill Pallets are connected together, the total containment capacity is 375 gallons minimum and does not require use of an Expansion Tank to meet the spill containment regulations. Ultra–Modular IBC SpillPallets are constructed of 100% polyethylene, eliminating the potential for rust and corrosion. They offer excellent chemical resistance to a broad range of chemicals including acids, solvents and oils. Indoor Models help facilities comply with newly–revised SPCC (Spill Prevention, Control and Countermeasures) Regulations, EPA Container Storage Regulation 40 CFR 264.175, 264.177(c) and 265.177(c). Outdoor Models comply with these regulations and Stormwater Management Regulations (NPDES). Outdoor Models are considered a "Best Management Practice" (BMP) for providing effective stormwater management. You will need to purchase one (1) UT–1118–0001, Assembly Kit, with each order. The order size does not matter – you will just need one (1) UT–1118–0001 per order. The Assembly kit is reusable for assembling any number of units. SPECIFICATIONS36,000 lbs. Load Bearing Capacity (9,000 lbs. per side), 365 gal. Sump Capacity - 1,603 lbs.4 pallets with 1 expansion tank250" L x 93" W x 79" H

Manufacturer: UltraTech, Manufacturer Part Number: 1128 New Ultra–Modular IBC SpillPallets provide low cost spill containment for multiple IBC tanks. Standard offerings include: 2–tank, 3–tank, 4–tank and 5–tank indoor and outdoor models. In addition, components may be purchased separately to allow users to "build–your–own" configurations for indoor models. Each IBC tank sits on a heavy–duty spill pallet that offers a Uniformly Distributed Load Capacity of 9,000 lbs. Each of the low profile spill pallets has a containment capacity of 75–gallons and measures 62" L x 62" W x 8.75" H. To increase containment capacity, a 65–gallon capacity Expansion Tank is available. "Flow–through" bulkhead fittings (1.25–inch diameter) are used to connect Spill Pallets and Expansion Tanks together. This patented feature allows spills to be channeled throughout the containment system, thereby "borrowing" containment capacity from adjacent Spill Pallets and Expansion Tanks. Any number of the modular spill pallets can be connected together with the bulkhead fittings. Two (2) bulkhead fittings are used to connect one pallet to the next. Connecting an Expansion Tank to a Spill Pallet also requires two (2) bulkhead fittings. Bulkhead fittings are included with each 2–, 3–, 4–, or 5–tank model. Once five (5) or more Spill Pallets are connected together, the total containment capacity is 375 gallons minimum and does not require use of an Expansion Tank to meet the spill containment regulations. Ultra–Modular IBC SpillPallets are constructed of 100% polyethylene, eliminating the potential for rust and corrosion. They offer excellent chemical resistance to a broad range of chemicals including acids, solvents and oils. Indoor Models help facilities comply with newly–revised SPCC (Spill Prevention, Control and Countermeasures) Regulations, EPA Container Storage Regulation 40 CFR 264.175, 264.177(c) and 265.177(c). Outdoor Models comply with these regulations and Stormwater Management Regulations (NPDES). Outdoor Models are considered a "Best Management Practice" (BMP) for providing effective stormwater management. You will need to purchase one (1) UT–1118–0001, Assembly Kit, with each order. The order size does not matter – you will just need one (1) UT–1118–0001 per order. The Assembly kit is reusable for assembling any number of units. SPECIFICATIONS45,000 lbs. Load Bearing Capacity (9,000 lbs. per side), 375 gal. Sump Capacity - 625 lbs.5 pallets310" L x 62" W x 8.75" H

Manufacturer: UltraTech, Manufacturer Part Number: 1168 New Ultra–Modular IBC SpillPallets provide low cost spill containment for multiple IBC tanks. Standard offerings include: 2–tank, 3–tank, 4–tank and 5–tank indoor and outdoor models. In addition, components may be purchased separately to allow users to "build–your–own" configurations for indoor models. Each IBC tank sits on a heavy–duty spill pallet that offers a Uniformly Distributed Load Capacity of 9,000 lbs. Each of the low profile spill pallets has a containment capacity of 75–gallons and measures 62" L x 62" W x 8.75" H. To increase containment capacity, a 65–gallon capacity Expansion Tank is available. "Flow–through" bulkhead fittings (1.25–inch diameter) are used to connect Spill Pallets and Expansion Tanks together. This patented feature allows spills to be channeled throughout the containment system, thereby "borrowing" containment capacity from adjacent Spill Pallets and Expansion Tanks. Any number of the modular spill pallets can be connected together with the bulkhead fittings. Two (2) bulkhead fittings are used to connect one pallet to the next. Connecting an Expansion Tank to a Spill Pallet also requires two (2) bulkhead fittings. Bulkhead fittings are included with each 2–, 3–, 4–, or 5–tank model. Once five (5) or more Spill Pallets are connected together, the total containment capacity is 375 gallons minimum and does not require use of an Expansion Tank to meet the spill containment regulations. Ultra–Modular IBC SpillPallets are constructed of 100% polyethylene, eliminating the potential for rust and corrosion. They offer excellent chemical resistance to a broad range of chemicals including acids, solvents and oils. Indoor Models help facilities comply with newly–revised SPCC (Spill Prevention, Control and Countermeasures) Regulations, EPA Container Storage Regulation 40 CFR 264.175, 264.177(c) and 265.177(c). Outdoor Models comply with these regulations and Stormwater Management Regulations (NPDES). Outdoor Models are considered a "Best Management Practice" (BMP) for providing effective stormwater management. You will need to purchase one (1) UT–1118–0001, Assembly Kit, with each order. The order size does not matter – you will just need one (1) UT–1118–0001 per order. The Assembly kit is reusable for assembling any number of units. SPECIFICATIONS45,000 lbs. Load Bearing Capacity (9,000 lbs. per side), 375 gal. Sump Capacity - 1,948 lbs.5 pallets312" L x 62" W x 79" H

Manufacturer: UltraTech, Manufacturer Part Number: 1124Expansion Tank (Only) for Modular IBC Spill Pallet: Connecting an Expansion Tank to a spill pallet also requires two (2) bulkhead fittings. Bulkhead fittings are included with each 2–, 3–, 4–, or 5–tank model. Once five (5) or more spill pallets are connected together, the total containment capacity is 375 gallons minimum and does not require use of an Expansion Tank to meet the spill containment regulations. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: UltraTech, Manufacturer Part Number: 11172 Bulkhead Fittings for Modular IBC Spill Pallet: The bulkhead fittings not only "lock" connected modules together, but allow spilled liquid to flow from one module to the next. 24 x 24 x 38. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: UltraTech, Manufacturer Part Number: 1118 You will need to purchase one (1) UT–1118–0001, Assembly Kit, with each Ultra–Modular IBC SpillPallet order. The order size does not matter – you will just need one (1) UT–1118–0001 per order. The Assembly kit is reusable for assembling any number of units and includes a hole saw, arbor and set of two (2) tightening tools. SPECIFICATIONS4 lbs.1 kitincludes hole saw, arbor, set of two (2) tightening tools