Spill Containment

Manufacturer: Enpac, Manufacturer Part Number: 5750-YEYour Temporary Storage Solution! A temporary storage solution that’s simple to set up and use! SpillPals provide incidental spill control during temporary storage of drums, machine parts, tanks and more. They can also be used as a wash–down pad or pumping station. Drive in and out with a hand truck or forklift. 4” thick foam sidewalls spring back into place, eliminating the need for a separate ramp for access! Excellent rip, tear and chemical resistance properties. Included grates keep drums or equipment above spilled liquids. Folded units ship easily Stores on a shelf – frees up valuable floor space 6 and 8–drum units meet EPA 40 CFR 264.175 regulations ⚠ WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.SPECIFICATIONS10 gal. Sump Capacity - 11 lbs.1 spillpal25" L x 24" W x 4" H

Manufacturer: Peabody Engineering, Manufacturer Part Number: 01-29433Cylindrical High Density Polyethylene open top tanks come standard with Dust Cover style lids. All tanks are standard natural polyethylene. Tanks are available in blue, black, or yellow for 10% adder. Flat side of wall with molded in calibration charts for quick level indication available on tanks that come standard with lid. Black lettering is available on these tanks at an additional charge. Tank diameter is of bottom cylinder, not overall lid dimension; height is from floor to top of lid. Open Top Tanks with HDLPE construction are Certified NSF/ANSI 61 Compliant. Mfg. Part#: 01-29433

Manufacturer: Peabody Engineering, Manufacturer Part Number: 01-28960Cylindrical High Density Polyethylene open top tanks come standard with Dust Cover style lids. All tanks are standard natural polyethylene. Tanks are available in blue, black, or yellow for 10% adder. Flat side of wall with molded in calibration charts for quick level indication available on tanks that come standard with lid. Black lettering is available on these tanks at an additional charge. Tank diameter is of bottom cylinder, not overall lid dimension; height is from floor to top of lid. Open Top Tanks with HDLPE construction are Certified NSF/ANSI 61 Compliant. Mfg. Part#: 01-28960

Manufacturer: Skolnik, Manufacturer Part Number: CQ1003UN Approved The 10 gallon steel drum is the economical workhorse of the container system! These UN Approved carbon steel, coldrolled drums come in a variety of sizes to meet all your needs. Both open and closedhead drums feature a corrosive resistant interior and can be lined with epoxyphenolic for added protection. Openhead drums have removable tops with sponge rubber gasket, 12gauge bolt ring closure and plated bolt and nut. Closedhead drums have 2" NPT and 3/4" NPT bungs. Custom colors, parts and Leverlock closures are available for your 10 gallon drum, upon request. ***Minimum ORDER IS 22 Drums*** SPECIFICATIONS1A1/X1.4/250 - 14 lbs.1 drum20/20/20 Gauge Steel

Manufacturer: Skolnik, Manufacturer Part Number: CQ1002UN Approved The economical workhorse of the container system! These UN Approved carbon steel, cold–rolled drums come in a variety of sizes to meet all your needs. Both open– and closed–head drums feature a corrosive resistant interior and can be lined with epoxy–phenolic for added protection. Open–head drums have removable tops with sponge rubber gasket, 12–gauge bolt ring closure and plated bolt and nut. Closed–head drums have 2" NPT and 3/4" NPT bungs. Custom colors, parts and Leverlock closures are available upon request. ***Minimum ORDER IS 19 Drums*** SPECIFICATIONS1A2/X120/S, 1A2/Y1.8/150 - 14 lbs.1 drum20/20/20 Gauge Steel

Manufacturer: Skolnik, Manufacturer Part Number: HM1002For Safe Transportation of Hazardous Waste For the safe and secure way to store or transport a wide range of materials. These open–head primary and Overpack containers, made of high–quality carbon steel, meet UN Structural Testing requirements and feature an optional corrosion–resistant lining of epoxy–phenolic. Painted bright yellow with a red cover, these easy–to–recognize drums come in every size you need: from 8 to 110 gallon capacities and range from 1.5mm to 0.9mm metal thickness combinations. Helps you comply with 49 CFR 173.3(c). Leverlock closures are available upon request. ***Minimum ORDER IS 19 Drums***     SPECIFICATIONS1A2/X120/S, 1A2/Y1.8/150 - 14 lbs.1 drum20/20/20 Gauge Steel

The 100 Gal HDPE Cone Lid is built for durability and a secure fit in your 100-gallon HDPE cone tanks. Made with performance in mind, this lid provides robust protection while improving drainage and tank integrity. Its sturdy design reduces maintenance requirements and creates a reliable seal, ensuring your industrial storage system runs at peak efficiency.Specifications Material: HDPE – Renowned for its UV resistance and outstanding chemical resistance. Compatibility: Specifically designed for 100-gallon HDPE cone tanks, ensuring a perfect integration. Manufacturer Part Number: 01-1224 – Reflecting the trusted quality of Peabody Engineering. Design Features: Secure-fit design that optimizes drainage and simplifies installation. Durability: Engineered to endure harsh environmental conditions with minimal upkeep. Benefits & ApplicationsThis 100 Gal HDPE Cone Lid not only secures your tank contents but also preserves the overall integrity of your cone tanks by promoting efficient drainage. It is ideal for industrial environments where safety and compliance are critical. The straightforward installation process makes it an excellent choice for routine maintenance and system upgrades. Whether replacing an old lid or setting up a new containment system, this product consistently delivers reliable performance.For more quality products from Peabody Engineering, visit our Peabody Engineering Collection. Discover our extensive range of spill containment solutions to help ensure your facility’s safety and operational efficiency.

Manufacturer: Eagle, Manufacturer Part Number: 1610BLK14 gal. Lab Pack (Black) w/Plastic Lever-Lock Ring

Manufacturer: Eagle, Manufacturer Part Number: 1610MBLK14 gal. Lab Pack (Black) w/Metal Lever-Lock Ring

Manufacturer: Eagle, Manufacturer Part Number: 1610M14 gal. Lab Pack (Yellow) w/Metal Lever-Lock Ring

Manufacturer: Grief Brothers, Manufacturer Part Number: P-15 UN Approved!These poly drums are blow–molded from a high molecular weight, high–density polyethylene and conform to UN recommendations. Each container is optimally drainable and offers the highest level of performance and value. The 20–gallon open–head drum comes in gray only. The 15, 30 and 55–gallon open–head drums come standard with a plain lid. Bung & Vent lid available upon request. Call for other sizes and colors.  Minimum Order of 108 Drums! SPECIFICATIONS9 lbs.1 drum1H1/Y1.9/100

Manufacturer: Grief Brothers, Manufacturer Part Number: O-15UN Approved! These poly drums are blow–molded from a high molecular weight, high–density polyethylene and conform to UN recommendations. Each container is optimally drainable and offers the highest level of performance and value. The 20–gallon open–head drum comes in gray only. The 15, 30 and 55–gallon open–head drums come standard with a plain lid. Bung & Vent lid available upon request. Call for other sizes and colors.   Minimum Order of 96 Drums! SPECIFICATIONS9 lbs.1 drum1H2/Y100/S

Manufacturer: PND, Manufacturer Part Number : 24RPlug N Dike paste instantly sticks to metal drums and fuel tanks. It stops leaks during emergency spills, protecting workers and the environment. Plug Rugs consist of a top Polyethylene liner and a bottom layer of Plug N Dike that are easy to apply and save time during application. Low-temp Plug N Dike works in cold temperatures, down to 5 degrees Fahrenheit (-15 degrees Celsius) Bentonite Glycol mix provides excellent chemical resistance for fuel leaks No surface preparation required, easily sticks to dirty or rusty surfaces Plug Rugs are pre-made and ready to use immediately Primarily used for fuels and non-miscible solvents Not recommended for plugging containers of antifreeze, acids, caustics, or oxidizers

Manufacturer: UltraTech, Manufacturer Part Number: 2113The Circular Drain Stopper! Prevent spills and runoff from entering drains. These polyurethane plugs form a tight, chemical–resistant seal. Removes easily when normal drain functionality is desired. Available in seven sizes from 2” to 12” in diameter. Drain Plug Kit includes 2”, 3” and 4” plugs packaged in a plastic carrying case. Drain Plugs are tapered. The listed size is the measurement at the middle of the plug. Tapered design wedges securely into standard drains to stop any flow Eyebolts are removable, allowing installation of grating with Drain Plug in place Non–absorbing, easily cleaned for repeated use SPECIFICATIONS1.5 lbs.1 plugFor 2" diameter drains

Manufacturer: Eagle, Manufacturer Part Number: 1650BEI20 gal. Lab Pack (Yellow) w/Screw Top Lid, Beige

Manufacturer: Enpac, Manufacturer Part Number: 1220-YE20–Gallon Salvage Drums are versatile units that can directly contain solids and sludges with security. With a 1/2 turn push down lid, this ergonomically designed unit accepts bottles, cans, and 5 gal. pails. With the highest rating in the industry, this "pill–bottle" design sets the new bar for Overpacks. With a tough HDPE polyethylene design, it is weather and chemical resistant and can be stacked. Units are also nestable, which allows for ease of shipment. The wide mouth, rigid walls, small footprint and integral handles make it perfect for overpacking damaged containers, emergency response, and medical and operating room waste destined for the freezer or incineration. Excellent for spillkits! Meets performance–oriented packaging requirements of US DOT and UN regulations.⚠ WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer: Grief Brothers, Manufacturer Part Number: O-20H UN Approved!These poly drums are blow–molded from a high molecular weight, high–density polyethylene and conform to UN recommendations. Each container is optimally drainable and offers the highest level of performance and value. The 20–gallon open–head drum comes in gray only. The 15, 30 and 55–gallon open–head drums come standard with a plain lid. Bung & Vent lid available upon request. Call for other sizes and colors.  Minimum Order of 100 Drums! SPECIFICATIONS12 lbs.1 drum1H2/Z130/S

Manufacturer: Eagle, Manufacturer Part Number: 1623MBLK20 Gal. Lab Pack Open Head Drum made of Black HDPE – w/Metal Lever–Lock Ring closure – fits a 5 gal. container (max). 100% Recyclable.SPECIFICATIONS11.5 lbs.1 lab pack20 Gallons

Manufacturer: Eagle, Manufacturer Part Number: 1623BLK20 Gal. Lab Pack Open Head Drum made of Black HDPE – w/Plastic Lever–Lock Ring closure – fits a 5 gal. container (max). 100% Recyclable.SPECIFICATIONS10.25 lbs.1 lab pack20 Gallons

Manufacturer: Eagle, Manufacturer Part Number: 1623MB20 Gal. Lab Pack Open Head Drum made of Blue HDPE – w/Metal Lever–Lock Ring closure – fits a 5 gal. container (max). 100% Recyclable.SPECIFICATIONS11.5 lbs.1 lab pack20 Gallons

Manufacturer: Eagle, Manufacturer Part Number: 1623M20 Gal. Lab Pack Open Head Drum made of Yellow HDPE – w/Metal Lever–Lock Ring closure – fits a 5 gal. container (max). 100% Recyclable.SPECIFICATIONS11.5 lbs.1 lab pack20 Gallons

Manufacturer: Eagle, Manufacturer Part Number: 162320 Gal. Lab Pack Open Head Drum made of Yellow HDPE – w/Plastic Lever–Lock Ring closure – fits a 5 gal. container (max). 100% Recyclable.SPECIFICATIONS10.25 lbs.1 lab pack20 Gallons

Manufacturer: UltraTech, Manufacturer Part Number: 8022-YELInstant Containment Made Easy! Just give these PopUp Pools a quick shake and they instantly expand and are ready for any emergency. Patented design features a foam ring that rises with the level of liquid to raise the sidewalls. 10 mil. polyethylene construction offers excellent chemical resistance. Ideal for damaged saddle tanks, hazmat spills, decontamination pools as well as leaking machinery and piping. All models are easily rolled into a tight package for efficient storage and can be reused after proper decontamination. SPECIFICATIONS4 lbs.1 pool35" Bot Dia x 28" Top Dia x 8" H

Manufacturer: Enpac, Manufacturer Part Number: SC-5920-0001The Easiest, Lightest Spill Containment Pool Available! Prowler Pop–up Pools offer excellent resistance to the widest range of chemicals, acids, fuels and other hazardous materials. They are also resistant to temperatures as low as –60°F, abrasion, punctures and UV rays. The Prowler is half the weight of comparably sized pools while offering twice the strength. Fits easily into spill response kits. Compact, lightweight and portable. Excellent for immediate spill response.⚠ WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.SPECIFICATIONS2 lbs.1 20-gallon pool28" Base x 18" Opening x 13" H