Manufacturer: Justrite, Manufacturer Part Number: 27006This is a SEDIMENT SCREEN for P/N 27220.

Manufacturer: Eagle, Manufacturer Part Number: 13132 1/2 gal. Stainless Steel w/Teflon Cap Gasket Type I Safety Can

Manufacturer: Eagle, Manufacturer Part Number: 13155 gal. Stainless Steel w/Teflon Cap Gasket Type I Safety Can

Manufacturer: Justrite, Manufacturer Part Number: 7150146Safety Can allows easier dispensing into containers. This coated steel Tilt Safety Can with Frame pivots for easy pouring then returns upright automatically when faucet is released. Features a self–closing brass faucet mounted on top for controlled dispensing of hazardous liquids. Lab faucet allows easier dispensing into containers with small openings. Separate fill opening includes a pressure and vacuum relief cap and double mesh metal flame arrestor.

Manufacturer: Justrite, Manufacturer Part Number: 7150156Steel Laboratory Safety Cans have all the benefits of Justrite's Type I cans, plus added features to make these the choice of lab professionals for safe dispensing of hazardous liquids into test tubes, small flasks and beakers. Fill spouts have self–close pressure relief caps with built–in vacuum breaker and double–mesh flame arrestors. Self–closing faucets provide trouble–free dispensing. Heavy–duty faucet is ideal for heavy use or industrial needs. Tilt Cans have a faucet on top and the can rests in a sturdy metal cradle. Cradle base measures 13.813" x 14". Cans fitted with larger faucet JP–08902 are better suited for heavy use and industrial needs. Dimensions: 11.5"OD x 15.375"HCapacity: 5 Gallons FM, UL Approved Old Justrite Part # 10888/ New Part# 7150156.

Manufacturer: Justrite, Manufacturer Part Number: 7150104Type I Safety Cans are compliant and economical. Justrite Type I safety cans reduce fire risks and make everyday use of flammables easier and safer. Protection features include a 3–1/2" (88mm) long chemical–resistant stainless steel flame arrester that stops flashback ignition, provides faster liquid flow and exceptional durability. The self–venting, self–closing leakproof lid prevents ruptures from pressure build–up and controls vapors and spills. Warning label includes an extra large ID zone for user labeling of contents to avoid misuse, reduce the potential for incompatible mixtures or may be used to designate department or individual owner. Made of galvanized steel with a tough powder paint finish, can capacities 1 gal (4L) and above have ample headspace to accommodate oil additives.

Manufacturer: Eagle, Manufacturer Part Number: 1605Poly Drum Cradle

Manufacturer: Justrite, Manufacturer Part Number: 7350130ONLY Justrite's D.O.T. AccuFlow Safety Cans comply with the DOT AND have approval from FM Global. Compliance with DOT regulations for over–the–road transport of flammables. A hold–down bracket is tethered to the spout and equipped with a big, easy–to–grasp tightening screw. When used for the transport of fuel, the fusible link bracket is easy to engage. The fusible link melts at 165°F (74°C). Disengage the fusible link bracket when the can is not being used for transportation purposes. AccuFlow's exclusive Safe–Squeeze trigger mechanism opens the piston actuated spout and vacuum release valve for accurate pouring. A release of the handle instantly closes the valve. Built–in safety features include internal flame arresters, leak tight, self–closing lid; automatic venting between 3 and 5 psig (0.2 and 0.35 bar); and heavy roll bars to protect the spout. Meets D.O.T. and HM–181 requirements. United Nations Approved.. UN Marking: 1A1/Y1.2/100. Accepted container under CARB. ⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer: Justrite, Manufacturer Part Number: 12010This is a SS DISCONNECT REPLACEMENT FOR P/N 12014.

Manufacturer: Justrite, Manufacturer Part Number: 12001This is a SS DISCONNECT REPLACEMENT FOR P/N 12013.

Manufacturer: Eagle, Manufacturer Part Number: 14175 gal. Metal Faucet Can - Red w/Brass Faucet

Manufacturer: Justrite, Manufacturer Part Number: 28191This is a PROSOLV CARBON FILTER #4343.

Manufacturer: Justrite, Manufacturer Part Number: 7350230ONLY Justrite's D.O.T. AccuFlow Safety Cans comply with the DOT AND have approval from FM Global. Compliance with DOT regulations for over–the–road transport of flammables. A hold–down bracket is tethered to the spout and equipped with a big, easy–to–grasp tightening screw. When used for the transport of fuel, the fusible link bracket is easy to engage. The fusible link melts at 165°F (74°C). Disengage the fusible link bracket when the can is not being used for transportation purposes. AccuFlow's exclusive Safe–Squeeze trigger mechanism opens the piston actuated spout and vacuum release valve for accurate pouring. A release of the handle instantly closes the valve. Built–in safety features include internal flame arresters, leak tight, self–closing lid; automatic venting between 3 and 5 psig (0.2 and 0.35 bar); and heavy roll bars to protect the spout. Meets D.O.T. and HM–181 requirements. United Nations Approved.. UN Marking: 1A1/Y1.2/100. Accepted container under CARB.⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer: Justrite, Manufacturer Part Number: 7325230ONLY Justrite's D.O.T. AccuFlow Safety Cans comply with the DOT AND have approval from FM Global. Compliance with DOT regulations for over–the–road transport of flammables. A hold–down bracket is tethered to the spout and equipped with a big, easy–to–grasp tightening screw. When used for the transport of fuel, the fusible link bracket is easy to engage. The fusible link melts at 165°F (74°C). Disengage the fusible link bracket when the can is not being used for transportation purposes. AccuFlow's exclusive Safe–Squeeze trigger mechanism opens the piston actuated spout and vacuum release valve for accurate pouring. A release of the handle instantly closes the valve. Built–in safety features include internal flame arresters, leak tight, self–closing lid; automatic venting between 3 and 5 psig (0.2 and 0.35 bar); and heavy roll bars to protect the spout. Meets D.O.T. and HM–181 requirements. United Nations Approved.. UN Marking: 1A1/Y1.2/100. Accepted container under CARB. ⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer: Justrite, Manufacturer Part Number: 7350210ONLY Justrite's D.O.T. AccuFlow Safety Cans comply with the DOT AND have approval from FM Global. Compliance with DOT regulations for over–the–road transport of flammables. A hold–down bracket is tethered to the spout and equipped with a big, easy–to–grasp tightening screw. When used for the transport of fuel, the fusible link bracket is easy to engage. The fusible link melts at 165°F (74°C). Disengage the fusible link bracket when the can is not being used for transportation purposes. AccuFlow's exclusive Safe–Squeeze trigger mechanism opens the piston actuated spout and vacuum release valve for accurate pouring. A release of the handle instantly closes the valve. Built–in safety features include internal flame arresters, leak tight, self–closing lid; automatic venting between 3 and 5 psig (0.2 and 0.35 bar); and heavy roll bars to protect the spout. Meets D.O.T. and HM–181 requirements. United Nations Approved.. UN Marking: 1A1/Y1.2/100. Accepted container under CARB.⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer: Justrite, Manufacturer Part Number: 7325220ONLY Justrite's D.O.T. AccuFlow Safety Cans comply with the DOT AND have approval from FM Global. Compliance with DOT regulations for over–the–road transport of flammables. A hold–down bracket is tethered to the spout and equipped with a big, easy–to–grasp tightening screw. When used for the transport of fuel, the fusible link bracket is easy to engage. The fusible link melts at 165°F (74°C). Disengage the fusible link bracket when the can is not being used for transportation purposes. AccuFlow's exclusive Safe–Squeeze trigger mechanism opens the piston actuated spout and vacuum release valve for accurate pouring. A release of the handle instantly closes the valve. Built–in safety features include internal flame arresters, leak tight, self–closing lid; automatic venting between 3 and 5 psig (0.2 and 0.35 bar); and heavy roll bars to protect the spout. Meets D.O.T. and HM–181 requirements. United Nations Approved.. UN Marking: 1A1/Y1.2/100. Accepted container under CARB. ⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer: Justrite, Manufacturer Part Number: 7350110ONLY Justrite's D.O.T. AccuFlow Safety Cans comply with the DOT AND have approval from FM Global. Compliance with DOT regulations for over–the–road transport of flammables. A hold–down bracket is tethered to the spout and equipped with a big, easy–to–grasp tightening screw. When used for the transport of fuel, the fusible link bracket is easy to engage. The fusible link melts at 165°F (74°C). Disengage the fusible link bracket when the can is not being used for transportation purposes. AccuFlow's exclusive Safe–Squeeze trigger mechanism opens the piston actuated spout and vacuum release valve for accurate pouring. A release of the handle instantly closes the valve. Built–in safety features include internal flame arresters, leak tight, self–closing lid; automatic venting between 3 and 5 psig (0.2 and 0.35 bar); and heavy roll bars to protect the spout. Meets D.O.T. and HM–181 requirements. United Nations Approved.. UN Marking: 1A1/Y1.2/100. Accepted container under CARB.⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer: Justrite, Manufacturer Part Number: 7325120ONLY Justrite's D.O.T. AccuFlow Safety Cans comply with the DOT AND have approval from FM Global. Compliance with DOT regulations for overtheroad transport of flammables. A holddown bracket is tethered to the spout and equipped with a big, easytograsp tightening screw. When used for the transport of fuel, the fusible link bracket is easy to engage. The fusible link melts at 165 °F (74 °C). Disengage the fusible link bracket when the can is not being used for transportation purposes. AccuFlow's exclusive SafeSqueeze trigger mechanism opens the piston actuated spout and vacuum release valve for accurate pouring. A release of the handle instantly closes the valve. Builtin safety features include internal flame arresters, leak tight, selfclosing lid; automatic venting between 3 and 5 psig (0.2 and 0.35 bar); and heavy roll bars to protect the spout. Meets D.O.T. and HM181 requirements. United Nations Approved.. UN Marking: 1A1/Y1.2/100. Accepted container under CARB.âš WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer: Justrite, Manufacturer Part Number: 7325130ONLY Justrite's D.O.T. AccuFlow Safety Cans comply with the DOT AND have approval from FM Global. Compliance with DOT regulations for over–the–road transport of flammables. A hold–down bracket is tethered to the spout and equipped with a big, easy–to–grasp tightening screw. When used for the transport of fuel, the fusible link bracket is easy to engage. The fusible link melts at 165Â °F (74Â °C). Disengage the fusible link bracket when the can is not being used for transportation purposes. AccuFlow's exclusive Safe–Squeeze trigger mechanism opens the piston actuated spout and vacuum release valve for accurate pouring. A release of the handle instantly closes the valve. Built–in safety features include internal flame arresters, leak tight, self–closing lid; automatic venting between 3 and 5 psig (0.2 and 0.35 bar); and heavy roll bars to protect the spout. Meets D.O.T. and HM–181 requirements. United Nations Approved.. UN Marking: 1A1/Y1.2/100. Accepted container under CARB.⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer: Eagle, Manufacturer Part Number: 1323-ELPerfect for temporary storage of liquid wastes. 4" diameter spout cap opens to a wide 80 degree angle and can be locked open for conveniently emptying various types of containers. All cans are equipped with a flame arrestor. Cap assembly opens automatically to relieve excessive internal vapor pressure. FM approved.SPECIFICATIONS8 lbs.1 can2.5 Gal

Manufacturer: Justrite, Manufacturer Part Number: PP12752This is a 2–GALLON DISC HPLC CAN.

Manufacturer: Justrite, Manufacturer Part Number: PP12755This is a 5–GALLON DISC HPLC CAN.

Manufacturer: Justrite, Manufacturer Part Number: 28177This is a POLY MANIFOLD SS KIT.

Manufacturer: Justrite, Manufacturer Part Number: 14565Type I Nonmetallic Safety Cans are constructed of high–density polyethylene and offer distinct advantages over steel models. They are inert so they standup to tough acids and corrosives, as well as heat. Poly cans are dent, puncture and chip–resistant and their color is integral to the can. All Justrite nonmetallic cans are designed and manufactured with a unique conductive current–carrying carbon insert imbedded into rib of the container, completing a ground path between the cover assembly and the flame arrester in the spout. When used with a grounding strip, this provides proper grounding and prevents the creation of an arc during filling or pouring. All Justrite Nonmetallic Type I cans are FM approved. The self–close cap, pressure relief mechanism and dual–density flame arrester work together to prevent ignition sources from entering without restricting liquid flow in or out of the can.