Ramps and Dock Plates

Manufacturer: Vestil, Manufacturer Part Number: SPO-RUOptional shallow pit option (minimum depth 24in). MFG Part# SPO-RU

Manufacturer: Vestil, Manufacturer Part Number: CAS-RU-800The curb angle set are a wonderful asset when implementing a new dock leveler. The curb angle sets allow the surface to have a smooth transition and an a eye appealing appearance when installing dock leveling equipment. The set comes in multiple pieces for the easy handling and positioning. MFG Part# CAS-RU-600

Manufacturer: Vestil, Manufacturer Part Number: CAS-RU-1000The curb angle set are a wonderful asset when implementing a new dock leveler. The curb angle sets allow the surface to have a smooth transition and an a eye appealing appearance when installing dock leveling equipment. The set comes in multiple pieces for the easy handling and positioning. MFG Part# CAS-RU-1000

Manufacturer: Vestil, Manufacturer Part Number: FOD/6'Optional leg option for in front of dock placement of 72 (in.) length for dockleveler.

Manufacturer: Vestil, Manufacturer Part Number: CAS-78Optional curb angle set. MFG Part# CAS-78

Manufacturer: Vestil, Manufacturer Part Number: WL-7HPOptional 7-1/2 HP Power Unit that is wired for three (3) phase 28-23/46V 6Hz, unit will pump 6 gallons per minute.

Manufacturer: Vestil, Manufacturer Part Number: FOD/8'Optional leg option for in front of dock placement of 96 (in.) length for dockleveler.

Manufacturer: Vestil, Manufacturer Part Number: FOD/10'Optional leg option for in front of dock placement of 12 (in.) length for Dockleveler.

Manufacturer: Vestil, Manufacturer Part Number: WL-WKOptional Mobile Wheel Kit system includes casters and a detachable handle.

Manufacturer: Vestil, Manufacturer Part Number: WL-TSPOptional two (2) speed pump that increases lifting speed when the lift is unloaded. It increases lifting speed. This system is ideal for unloading applications .

Manufacturer: Vestil, Manufacturer Part Number: WL-WBOptional Warning Beeper and Strobe that sounds and flashes during the lifting and lowering operations on a Truck Scissor Dock Lift.

Manufacturer: Vestil, Manufacturer Part Number: WL-SSTBOptional Split Steel Bridge that can be added to the opposite side of the Truck Scissor Dock Lift.

Manufacturer: Vestil, Manufacturer Part Number: RAMP-4Edge-O-Dockleveler optional Approach Ramp.

Manufacturer: Vestil, Manufacturer Part Number: FM-PPOptional Edge-O-Dockleveler Conversion Kit. Mechanical FM-Series to Hand Pump PP-Series.

Manufacturer: Vestil, Manufacturer Part Number: PM-12BRIDGE-AOptional Split Aluminum Hinged Bridge with Runoff Guards and Lifting Chains.

Manufacturer: Vestil, Manufacturer Part Number: EH-TLOptional electric interlock (EH dock leveler & Trailer Restraint). The trailer is sold separately.

Manufacturer: Vestil, Manufacturer Part Number: BTA-07007230Uniform Capacity (lbs.): 7000, Height Difference (in.) at 8 degree/17%: 3, Height Difference (in.) at 11 degrees/19%: 4, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 67–3/4, Usable Length (in.) : 30 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-10006630Uniform Capacity (lbs.): 10000, Height Difference (in.) at 8 degree/17%: 3, Height Difference (in.) at 11 degrees/19%: 4, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 61–1/2, Usable Length (in.) : 30 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-09006630Uniform Capacity (lbs.): 9000, Height Difference (in.) at 8 degree/17%: 3, Height Difference (in.) at 11 degrees/19%: 4, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 61–3/4, Usable Length (in.) : 30 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-08006630Uniform Capacity (lbs.): 8000, Height Difference (in.) at 8 degree/17%: 3, Height Difference (in.) at 11 degrees/19%: 4, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 61–3/4, Usable Length (in.) : 30 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-08005430Uniform Capacity (lbs.): 8000, Height Difference (in.) at 8 degree/17%: 3, Height Difference (in.) at 11 degrees/19%: 4, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 49–3/4, Usable Length (in.) : 30 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-07006636Uniform Capacity (lbs.): 7000, Height Difference (in.) at 8 degree/17%: 4, Height Difference (in.) at 11 degrees/19%: 5, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 61–3/4, Usable Length (in.) : 36 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-07006630Uniform Capacity (lbs.): 7000, Height Difference (in.) at 8 degree/17%: 3, Height Difference (in.) at 11 degrees/19%: 4, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 61–3/4, Usable Length (in.) : 30 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-06005442Uniform Capacity (lbs.): 6000, Height Difference (in.) at 8 degree/17%: 5, Height Difference (in.) at 11 degrees/19%: 6, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 49–3/4, Usable Length (in.) : 42 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.