Bradley
Locker End, 15in. Deep, 72in. High - Model EPFT-S1572-203
$106.40
Manufacturer: Bradley, Manufacturer Part Number: EPFT-S1572-203Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a flat top. Constructed of Deep Blue High Density Polyethelene plastic. The Locker configuration is 15in. deep. The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.
Bradley
Locker End, 15in. Deep, 72in. High - Model EPST-S1572-200
$118.40
Manufacturer: Bradley, Manufacturer Part Number: EPST-S1572-200Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a slope top. Constructed of Gray High Density Polyethelene plastic. The Locker configuration is 15in. deep. The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.
Bradley
Locker End, 15in. Deep, 72in. High - Model EPST-S1572-202
$118.40
Manufacturer: Bradley, Manufacturer Part Number: EPST-S1572-202Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a slope top. Constructed of Beige High Density Polyethelene plastic. The Locker configuration is 15in. deep. The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.
Bradley
Locker End, 15in. Deep, 72in. High - Model EPST-S1572-203
$118.40
Manufacturer: Bradley, Manufacturer Part Number: EPST-S1572-203Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a slope top. Constructed of Deep Blue High Density Polyethelene plastic. The Locker configuration is 15in. deep. The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.
Bradley
Locker End, 18in. Deep, 60in. High - Model EPFT-S1860-200
$111.20
Manufacturer: Bradley, Manufacturer Part Number: EPFT-S1860-200Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a flat top. Constructed of Gray High Density Polyethelene plastic. The Locker configuration is 18in. deep. The height of the Locker is 60in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.
Bradley
Locker End, 18in. Deep, 60in. High - Model EPFT-S1860-202
$111.20
Manufacturer: Bradley, Manufacturer Part Number: EPFT-S1860-202Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a flat top. Constructed of Beige High Density Polyethelene plastic. The Locker configuration is 18in. deep. The height of the Locker is 60in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.
Bradley
Locker End, 18in. Deep, 60in. High - Model EPFT-S1860-203
$111.20
Manufacturer: Bradley, Manufacturer Part Number: EPFT-S1860-203Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a flat top. Constructed of Deep Blue High Density Polyethelene plastic. The Locker configuration is 18in. deep. The height of the Locker is 60in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.
Bradley
Locker End, 18in. Deep, 60in. High - Model EPST-S1860-200
$121.60
Manufacturer: Bradley, Manufacturer Part Number: EPST-S1860-200Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a slope top. Constructed of Gray High Density Polyethelene plastic. The Locker configuration is 18in. deep. The height of the Locker is 60in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.
Bradley
Locker End, 18in. Deep, 60in. High - Model EPST-S1860-202
$121.60
Manufacturer: Bradley, Manufacturer Part Number: EPST-S1860-202Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a slope top. Constructed of Beige High Density Polyethelene plastic. The Locker configuration is 18in. deep. The height of the Locker is 60in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.
Bradley
Locker End, 18in. Deep, 60in. High - Model EPST-S1860-203
$121.60
Manufacturer: Bradley, Manufacturer Part Number: EPST-S1860-203Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a slope top. Constructed of Deep Blue High Density Polyethelene plastic. The Locker configuration is 18in. deep. The height of the Locker is 60in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.
Bradley
Locker End, 18in. Deep, 72in. High - Model EPFT-S1872-200
$111.20
Manufacturer: Bradley, Manufacturer Part Number: EPFT-S1872-200Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a flat top. Constructed of Gray High Density Polyethelene plastic. The Locker configuration is 18in. deep. The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.
Bradley
Locker End, 18in. Deep, 72in. High - Model EPFT-S1872-202
$111.20
Manufacturer: Bradley, Manufacturer Part Number: EPFT-S1872-202Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a flat top. Constructed of Beige High Density Polyethelene plastic. The Locker configuration is 18in. deep. The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.
Bradley
Locker End, 18in. Deep, 72in. High - Model EPFT-S1872-203
$111.20
Manufacturer: Bradley, Manufacturer Part Number: EPFT-S1872-203Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a flat top. Constructed of Deep Blue High Density Polyethelene plastic. The Locker configuration is 18in. deep. The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.
Bradley
Locker End, 18in. Deep, 72in. High - Model EPFT-S1872-247
$142.40
Manufacturer: Bradley, Manufacturer Part Number: EPFT-S1872-247Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a flat top. Constructed of 100% Post Consumer High Density Polyethelene plastic in color of Toffee. The Locker configuration is 18in. deep. The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.
Bradley
Locker End, 18in. Deep, 72in. High - Model EPST-S1872-200
$121.60
Manufacturer: Bradley, Manufacturer Part Number: EPST-S1872-200Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a slope top. Constructed of Gray High Density Polyethelene plastic. The Locker configuration is 18in. deep. The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.
Bradley
Locker End, 18in. Deep, 72in. High - Model EPST-S1872-202
$121.60
Manufacturer: Bradley, Manufacturer Part Number: EPST-S1872-202Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a slope top. Constructed of Beige High Density Polyethelene plastic. The Locker configuration is 18in. deep. The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.
Bradley
Locker End, 18in. Deep, 72in. High - Model EPST-S1872-203
$121.60
Manufacturer: Bradley, Manufacturer Part Number: EPST-S1872-203Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a slope top. Constructed of Deep Blue High Density Polyethelene plastic. The Locker configuration is 18in. deep. The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.
Bradley
Locker End, 18in. Deep, 72in. High - Model EPST-S1872-247
$160.00
Manufacturer: Bradley, Manufacturer Part Number: EPST-S1872-247Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a slope top. Constructed of 100% Post Consumer High Density Polyethelene plastic in color of Toffee. The Locker configuration is 18in. deep. The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.
Bradley
Slope Top,12in. Deep,36in. Wide - Model ST1236-202
$296.80
Manufacturer: Bradley, Manufacturer Part Number: ST1236-202Locker Slope Top is constructed of 1/2in. thick HDPE material. Slope Top is designed to cover top of lockers and will not allow dust or items to be placed on lockers. Constructed of Beige High Density Polyethelene plastic. The Locker configuration is 12in. deep. The locker components are 36in. wide. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.
Bradley
Slope Top,18in. Deep,36in. Wide - Model ST1836-200
$347.20
Manufacturer: Bradley, Manufacturer Part Number: ST1836-200Locker Slope Top is constructed of 1/2in. thick HDPE material. Slope Top is designed to cover top of lockers and will not allow dust or items to be placed on lockers. Constructed of Gray High Density Polyethelene plastic. The Locker configuration is 18in. deep. The locker components are 36in. wide. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.
Bradley
Slope Top,18in. Deep,36in. Wide - Model ST1836-202
$347.20
Manufacturer: Bradley, Manufacturer Part Number: ST1836-202Locker Slope Top is constructed of 1/2in. thick HDPE material. Slope Top is designed to cover top of lockers and will not allow dust or items to be placed on lockers. Constructed of Beige High Density Polyethelene plastic. The Locker configuration is 18in. deep. The locker components are 36in. wide. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.
Bradley
Slope Top,18in. Deep,36in. Wide - Model ST1836-203
$347.20
Manufacturer: Bradley, Manufacturer Part Number: ST1836-203Locker Slope Top is constructed of 1/2in. thick HDPE material. Slope Top is designed to cover top of lockers and will not allow dust or items to be placed on lockers. Constructed of Deep Blue High Density Polyethelene plastic. The Locker configuration is 18in. deep. The locker components are 36in. wide. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.
Bradley
Slope Top,18in. Deep,45in. Wide - Model ST1845-200
$414.40
Manufacturer: Bradley, Manufacturer Part Number: ST1845-200Locker Slope Top is constructed of 1/2in. thick HDPE material. Slope Top is designed to cover top of lockers and will not allow dust or items to be placed on lockers. Constructed of Gray High Density Polyethelene plastic. The Locker configuration is 18in. deep. The locker components are 45in. wide. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.
Bradley
Slope Top,18in. Deep,45in. Wide - Model ST1845-202
$414.40
Manufacturer: Bradley, Manufacturer Part Number: ST1845-202Locker Slope Top is constructed of 1/2in. thick HDPE material. Slope Top is designed to cover top of lockers and will not allow dust or items to be placed on lockers. Constructed of Beige High Density Polyethelene plastic. The Locker configuration is 18in. deep. The locker components are 45in. wide. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.