Material Handling

Manufacturer: Vestil, Manufacturer Part Number: E-4848Capacity: 2,600 lbs., Width: 48", Length: 48", Height Difference: 7", Plate Thickness: 3/8" – Aluminum Economizer Dockplate – Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with traffic to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid treadplate with bolt–on zinc plated legs and handles. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.

Manufacturer: Vestil, Manufacturer Part Number: EH-4860Capacity: 2,900 lbs., Plate Thickness: ", Width: 48", Length: 60", Height Differential: 9" – Aluminum Economizer Dockplate – Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with people to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid tread plate. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.

Manufacturer: Vestil, Manufacturer Part Number: FM-0648Capacity: 6,000 lbs., Operation: Mechanical, Usable Width: 48" – Edge–O–Docklevelers – Permanently attaches to face of dock. Recommended for docks at least 48" high. Each unit provides a service range of 5" up and 5" down. When the trailer departs the lip drops automatically behind the face of the bumpers. Concrete recess is not required. Complete with 2" x 8" x 18" bumpers and installation instructions. Standard ramping length is 27". A steel dock edge is required for proper installation. The Mechanical Edge–O–Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically.

Manufacturer: Vestil, Manufacturer Part Number: SE-4830Capacity: 5,000 lbs., Overall Width: 48", Overall Length: 30", Height Differential: 4", Plate Thickness: 3/8" – Steel Truck Dockplate – Constructed of high strength INX=55 (55,000 psi) steel. Safety locking legs prevent slippage between truck and dock. Raised pattern safety tread plate helps provide positive traction. Beveled edges for smooth entry and exit. Chain pickup comes standard on all units. Designed with an 11° bend located 9" from the beveled edge. The legs are 12" from the beveled edge. Manufactured incompliance with OSHA (video available).

Manufacturer: Vestil, Manufacturer Part Number: SEH-4830Capacity: 8,800 lbs., Overall Width: 48", Overall Length: 30", Height Differential: 4", Plate Thickness: 1/2" – Steel Truck Dockplate – Constructed of high strength INX=55 (55,000 psi) steel. Safety locking legs prevent slippage between truck and dock. Raised pattern safety tread plate helps provide positive traction. Beveled edges for smooth entry and exit. Chain pickup comes standard on all units. Designed with an 11° bend located 9" from the beveled edge. The legs are 12" from the beveled edge. Manufactured incompliance with OSHA (video available).

Manufacturer: Vestil, Manufacturer Part Number: SE-4836Capacity: 4,125 lbs., Overall Width: 48", Overall Length: 36", Height Differential: 5", Plate Thickness: 3/8" – Steel Truck Dockplate – Constructed of high strength INX=55 (55,000 psi) steel. Safety locking legs prevent slippage between truck and dock. Raised pattern safety tread plate helps provide positive traction. Beveled edges for smooth entry and exit. Chain pickup comes standard on all units. Designed with an 11° bend located 9" from the beveled edge. The legs are 12" from the beveled edge. Manufactured incompliance with OSHA (video available).

Manufacturer: Vestil, Manufacturer Part Number: SEH-4836Capacity: 7,300 lbs., Overall Width: 48", Overall Length: 36", Height Differential: 5", Plate Thickness: 1/2" – Steel Truck Dockplate – Constructed of high strength INX=55 (55,000 psi) steel. Safety locking legs prevent slippage between truck and dock. Raised pattern safety tread plate helps provide positive traction. Beveled edges for smooth entry and exit. Chain pickup comes standard on all units. Designed with an 11° bend located 9" from the beveled edge. The legs are 12" from the beveled edge. Manufactured incompliance with OSHA (video available).

Manufacturer: Vestil, Manufacturer Part Number: SE-4848Capacity: 3,090 lbs., Overall Width: 48", Overall Length: 48", Height Differential: 7", Plate Thickness: 3/8" – Steel Truck Dockplate – Constructed of high strength INX=55 (55,000 psi) steel. Safety locking legs prevent slippage between truck and dock. Raised pattern safety tread plate helps provide positive traction. Beveled edges for smooth entry and exit. Chain pickup comes standard on all units. Designed with an 11° bend located 9" from the beveled edge. The legs are 12" from the beveled edge. Manufactured incompliance with OSHA (video available).

Manufacturer: Vestil, Manufacturer Part Number: SEH-4848Capacity: 5,500 lbs., Overall Width: 48", Overall Length: 48", Height Differential: 7", Plate Thickness: 1/2" – Steel Truck Dockplate – Constructed of high strength INX=55 (55,000 psi) steel. Safety locking legs prevent slippage between truck and dock. Raised pattern safety tread plate helps provide positive traction. Beveled edges for smooth entry and exit. Chain pickup comes standard on all units. Designed with an 11° bend located 9" from the beveled edge. The legs are 12" from the beveled edge. Manufactured incompliance with OSHA (video available).

Manufacturer: Vestil, Manufacturer Part Number: SE-4860Capacity: 2,475 lbs., Overall Width: 48", Overall Length: 60", Height Differential: 9", Plate Thickness: 3/8" – Steel Truck Dockplate – Constructed of high strength INX=55 (55,000 psi) steel. Safety locking legs prevent slippage between truck and dock. Raised pattern safety tread plate helps provide positive traction. Beveled edges for smooth entry and exit. Chain pickup comes standard on all units. Designed with an 11° bend located 9" from the beveled edge. The legs are 12" from the beveled edge. Manufactured incompliance with OSHA (video available).

Manufacturer: Vestil, Manufacturer Part Number: SEH-4860Capacity: 4,400 lbs., Overall Width: 48", Overall Length: 60", Height Differential: 9", Plate Thickness: 1/2" – Steel Truck Dockplate – Constructed of high strength INX=55 (55,000 psi) steel. Safety locking legs prevent slippage between truck and dock. Raised pattern safety tread plate helps provide positive traction. Beveled edges for smooth entry and exit. Chain pickup comes standard on all units. Designed with an 11° bend located 9" from the beveled edge. The legs are 12" from the beveled edge. Manufactured incompliance with OSHA (video available).

Manufacturer: Vestil, Manufacturer Part Number: BTA-06005430Uniform Capacity (lbs.): 6000, Height Difference (in.) at 8 degree/17%: 3, Height Difference (in.) at 11 degrees/19%: 4, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 49–3/4, Usable Length (in.) : 30 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-08005430Uniform Capacity (lbs.): 8000, Height Difference (in.) at 8 degree/17%: 3, Height Difference (in.) at 11 degrees/19%: 4, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 49–3/4, Usable Length (in.) : 30 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-15005436Uniform Capacity (lbs.): 15000, Height Difference (in.) at 8 degree/17%: 4, Height Difference (in.) at 11 degrees/19%: 5, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 49–1/2, Usable Length (in.) : 36 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-06005442Uniform Capacity (lbs.): 6000, Height Difference (in.) at 8 degree/17%: 5, Height Difference (in.) at 11 degrees/19%: 6, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 49–3/4, Usable Length (in.) : 42 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-08005442Uniform Capacity (lbs.): 8000, Height Difference (in.) at 8 degree/17%: 5, Height Difference (in.) at 11 degrees/19%: 6, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 49–1/2, Usable Length (in.) : 42 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-10005448Uniform Capacity (lbs.): 10000, Height Difference (in.) at 8 degree/17%: 5–1/2, Height Difference (in.) at 11 degrees/19%: 7, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 49–1/2, Usable Length (in.) : 48 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-15005448Uniform Capacity (lbs.): 15000, Height Difference (in.) at 8 degree/17%: 5–1/2, Height Difference (in.) at 11 degrees/19%: 7, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 47–3/4, Usable Length (in.) : 48 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-05005454Uniform Capacity (lbs.): 5000, Height Difference (in.) at 8 degree/17%: 6, Height Difference (in.) at 11 degrees/19%: 8–1/2, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 49–3/4, Usable Length (in.) : 54 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-06005454Uniform Capacity (lbs.): 6000, Height Difference (in.) at 8 degree/17%: 6, Height Difference (in.) at 11 degrees/19%: 8–1/2, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 49–1/2, Usable Length (in.) : 54 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-07005454Uniform Capacity (lbs.): 7000, Height Difference (in.) at 8 degree/17%: 6, Height Difference (in.) at 11 degrees/19%: 8–1/2, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 49–1/2, Usable Length (in.) : 54 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-08005454Uniform Capacity (lbs.): 8000, Height Difference (in.) at 8 degree/17%: 6, Height Difference (in.) at 11 degrees/19%: 8–1/2, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 49–1/2, Usable Length (in.) : 54 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-10005460Uniform Capacity (lbs.): 10000, Height Difference (in.) at 8 degree/17%: 7, Height Difference (in.) at 11 degrees/19%: 10, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 49–1/2, Usable Length (in.) : 60 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-05005466Uniform Capacity (lbs.): 5000, Height Difference (in.) at 8 degree/17%: 8, Height Difference (in.) at 11 degrees/19%: 11, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 49–3/4, Usable Length (in.) : 66 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.