Manufacturer: Morse, Manufacturer Part Number: 152The economical Morse model 152 Drum Truck is easy to use. Simply place the drum truck upright along side your drum, engage the upper rim hook, and tip back to load. Move your heavy drum on two 10" rubber mold–on wheels. Capacity: 1000 Lb. Handle your 55–gallon steel, plastic or fiber drum with upper rim, a 30–gallon drum at least 30" tall, or an 85–gallon "salvage drum".SPECIFICATIONS26" x 13" x 41" - 42 lbs.

Manufacturer: Vestil, Manufacturer Part Number: DCR-205-12-DCUniform Capacity (pounds): 1,200, Accepts: 55–gallon steel drum, Chain (feet): 15 , Drum Rotation (degrees): 360, Fork Pocket Height (in.): 2–1/2, Fork Pocket Width (in.): 7–1/2, DC Voltage: 24 – This Fork Truck Drum Carrier/Rotator allows you to easily transport and rotate steel drums using a fork truck. Drums are held securely in place by a durable chain locking system. Carrier/Rotator is provided with a chain to allow the drum to be rotated from the fork truck operator's seat. This DC powered unit includes battery, on–board charger, and hand held control on a long coil cord. Drum must be full to rotate at rated capacity.

Manufacturer: Vestil, Manufacturer Part Number: DCR-205-8-DCCapacity: 800 lbs. – Fork Truck Drum Carrier / Rotator – This product allows you to easily transport and rotate 55–gallon steel drums using a fork truck. Drums are held securely in place by a durable chain locking system. Fork pockets measure 7" wide by 2" high usable. Safety chain is used to secure unit to fork truck. A bung nut wrench is also included for opening and closing drums. 12V DC Powered Operation. Drum must be full to rotate at rated capacity.

Manufacturer: Vestil, Manufacturer Part Number: DCR-205-20Capacity: 2,000 lbs., 10 crank turns per 90° rotation, 15' Chain – Fork Truck Drum Carrier / Rotator – This product allows you to easily transport and rotate 55 gallons steel drums using a fork truck. Drums are held securely in place by a durable chain locking system. Each unit is provided with a 15 foot long chain to allow the drum to be rotated up to 360° from the fork truck operator's seat. Fork pockets measure 7" wide by 2" high usable. Safety chain is used to secure unit to fork truck. Bung Nut Wrench included for opening and closing drums.

Manufacturer: Valley Craft, Manufacturer Part Number: 8575Hassle Free Drum Handling! The Barrel Hawk™ offers a simple design allowing for safe, efficient lifting, loading and unloading of drums from containment pallets. Its parrot beak style grab allows handling of virtually any kind of drum – steel, poly or fiber! Maximum lift of 20 1/2" is high enough to load and unload any spill pallet. 6" poly wheels with rear brake for added safety. Single operator/hand truck convenience Unique design allows lifting from middle of pallets Works with all drums Works with all of our spill pallets, decks and workstations SPECIFICATIONS800 lbs. Load Bearing Capacity - 232 lbs.1 truck61" H x 49.5" W x 40" L

Manufacturer: Wesco, Manufacturer Part Number: 240124Model #: ABT–10–SC–B. Spring loaded chime hook automatically engages drum. SCH standard; LCH special. Wheel brake bands activated by hand lever. Nose prongs reversible for use with 30 and 55 gallon drums. Two wheel choices: 10" Moldon Rubber on Aluminum Hub – #055684. 12" Pneumatic Steel Hub – #108484. ABT–10–SC–B FRAME:053174. Aluminum Construction. Weight Capacity: 1000 lbs. 10" Moldon Rubber Wheels. 6" Polyurethane Rear Wheels. Twin Handle. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Wesco, Manufacturer Part Number: 240120Model #: ABT–12–SC–B. Spring loaded chime hook automatically engages drum. SCH standard; LCH special. Wheel brake bands activated by hand lever. Nose prongs reversible for use with 30 and 55 gallon drums. Two wheel choices: 10" Moldon Rubber on Aluminum Hub – #055684. 12" Pneumatic Steel Hub – #108484. ABT–12–SC–B FRAME:053174. Aluminum Construction. Weight Capacity: 1000 lbs. 12" Pneumatic Wheels. 6" Moldon Rubber Rear Wheels. Twin Handle. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Valley Craft, Manufacturer Part Number: 3210Spark resistant aluminum trucks are much lighter than steel but extremely sturdy. Spring loaded chime hook automatically secures drum to truck. 4–wheel design allows truck to carry the entire weight of load. 10" x 2 1/2" rubber tires are mounted on an aluminum alloy hub and rim allowing for easy tire replacement. Braking system features a simple hand lever that operates both load carrying wheels. Gives operator complete control, even on ramps and inclines.SPECIFICATIONS52 lbs.1 truck1,000 lbs. Load Bearing Capacity

Manufacturer: Vestil, Manufacturer Part Number: DCHT-1-FFUniform Capacity (pounds): 750, Wheel Diameter (in.): 16, Wheel Width (in.): 4, Wheel Type: Foam Filled, Cradled Drum Height (in.): 14–1/2, Wheel (quantity): 2, Construction : Steel, Finish: Powder Coat Yellow – Multi–purpose Drum & Hand Truck unit serves as a drum truck, drum cradle, and a hand truck. Extra–long handles give leverage for access to drums on pallets. Unit lies horizontally for use as a drum cradle to empty drum contents. Steel nose plate and drum tines are interchangeable. Features large wheels for use over rough terrain. Includes built–in bung nut wrench. Ships fully assembled ready for immediate use.

Manufacturer: Valley Craft, Manufacturer Part Number: F82960A14–Wheel EZY–Rol Automatic Drum Truck features Valley Craft's exclusive EZY–Tilt design and spring–loaded chime hook so the operator never has to touch the drum. The spark–resistant aluminum frame makes the truck lightweight, yet sturdy. Equipped with hand brake for added safety. Shoes adjust to handle 30– and 55–gal. drums up to 1000 lbs. Replaceable wheels, shoes and axles available. Rolls easily on fully–pneumatic tires.

Manufacturer: Morse, Manufacturer Part Number: 160-WP-SSStainless steel 4–wheel drum truck with inflated tires for rough terrain mounted outside the frame for wider, more stable base. 32 x 32 x 40.5. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Wesco, Manufacturer Part Number: 240077Patented design, with long belt, handles all poly and steel drums including overpacks. Floating axle reduces effort required to break over and balance load. Non–puncture feet and belt are replaceable. 1,000 pound load capacity. Your choice of polyolefin or rubber wheels. SPECIFICATIONS67 lbs.1 truck59.5" H x 23.5" W (at handle)

Manufacturer: Wesco, Manufacturer Part Number: 240082Patented design, with long belt, handles all poly and steel drums including overpacks. Floating axle reduces effort required to break over and balance load. Non–puncture feet and belt are replaceable. 1,000 pound load capacity. Your choice of polyolefin or rubber wheels.SPECIFICATIONS82 lbs.1 truck59.5" H x 23.5" W (at handle)

Manufacturer: Wesco, Manufacturer Part Number: 240005Multi–functional drum truck allows you to move your drums on four wheels and acts as a drum cradle for storage or dispensing. It has a 1,000 pound capacity. The non–sparking polyolefin rollers allow for easy faucet positioning of drums. Frame clearance for dispensing into 5–gallon pails. Rear axle allows for loading and unloading of drums from pallets. Convenient kick–stand for upright storage. Your choice of polyolefin or rubber wheels.SPECIFICATIONS16.5" Drain Height - 82 lbs.1 truck/cradle56.5" H x 24" W (at handle)

Manufacturer: Wesco, Manufacturer Part Number: 240006Multi–functional drum truck allows you to move your drums on four wheels and acts as a drum cradle for storage or dispensing. It has a 1,000 pound capacity. The non–sparking polyolefin rollers allow for easy faucet positioning of drums. Frame clearance for dispensing into 5–gallon pails. Rear axle allows for loading and unloading of drums from pallets. Convenient kick–stand for upright storage. Your choice of polyolefin or rubber wheels.SPECIFICATIONS16.5" Drain Height - 66 lbs.1 truck/cradle56.5" H x 24" W (at handle)

Manufacturer: Vestil, Manufacturer Part Number: RDBT-PANOptional Drip Pan with brackets for the Multi-Purpose Drum Truck/Cradle.

Manufacturer: Morse, Manufacturer Part Number: 36-SSDRUM CRADLE TRUCK MADE OF TYPE 304 STAINLESS STEEL. DESIGNED FOR 55–GALLON STEEL DRUM UP TO 500 Lb.

Manufacturer: Vestil, Manufacturer Part Number: RDBT-SSUniform Capacity (pounds): 1,000, Wheel Diameter: 8", Wheel Width: 2", Caster Diameter: 6", Caster Width: 2", Caster Diameter: 3", Caster Width: 1–1/4", Wheel Type: Steel, Cradled Drum Height: 13", Drum Cradle Angle (degree): 3, Accepts: 55–gallon steel, plastic or fiber drums – This Multi–Purpose Drum Truck/Cradle is one of the most versatile drum trucks in the industry. This innovative product allows the operator to easily tip back the truck in order to transport drums ergonomically on four (4) wheels. Unit doubles as a drum cradle for storage and dispensing all in one. Unique design also allows the operator to place drums and retrieve off of a pallet. Standard with a wheeled undercarriage that positions the drum horizontally for drainage or storage. An integral self–storing bung wrench is standard. This attractive feature not only opens numerous drums, but helps to keep the drum snug on the truck. A convenient kickstand allows for upright storage. Powder coat finish.

Manufacturer: Wesco, Manufacturer Part Number: 240134Model #: ABT–12–SC–NB. Spring loaded chime hook automatically engages drum. SCH standard; LCH special. Wheel brake bands activated by hand lever. Nose prongs reversible for use with 30 and 55 gallon drums. Two wheel choices: 10" Moldon Rubber on Aluminum Hub – #055684. 12" Pneumatic Steel Hub – #108484. ABT–12–SC–NB FRAME: 053175. Aluminum Construction. Weight Capacity: 1000 lbs. 12" Pneumatic Wheels. 6" Moldon Rubber Rear Wheels. Twin Handle. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Wesco, Manufacturer Part Number: 240132Model #: ABT–10–SC–NB. Spring loaded chime hook automatically engages drum. SCH standard; LCH special. Wheel brake bands activated by hand lever. Nose prongs reversible for use with 30 and 55 gallon drums. Two wheel choices: 10" Moldon Rubber on Aluminum Hub – #055684. 12" Pneumatic Steel Hub – #108484. ABT–10–SC–NB FRAME:053175. Aluminum Construction. Weight Capacity: 1000 lbs. 10" Moldon Rubber Wheels. 6" Polyurethane Rear Wheels. Twin Handle. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Vestil, Manufacturer Part Number: DBT-P-4R-PODesigned for moving 55 gallon steel or plastic drums. Features a spring mechanism, which allows for easier tilting of fully-loaded drums. Four-wheel design for easier drum transportation when tilted. Top loop handle allows for easier control when moving. Drum is secured to truck with an adjustable height drum hook bar. Removable drum hook bar includes built-in bung nut wrenches. Capacity is 1,000 pounds. Steel construction with powder coat finish. MFG Part# DBT-P-4R-MR

Manufacturer: Wesco, Manufacturer Part Number: 240076Model #: 40BTW. Heavy duty, double–welded joints, 1" structural pipe frame. Self standing or with kick stand for upright storage. Handles all poly and fiber drums except overpacks (use 45BT for overpacks). Replaceable "feet" and belt, Part 150303. Floating axle reduces effort required to break over and balance load. With wheels resting on floor, 27" to center of belt. Steel, poly & fiber drums. 40BTW FRAME: 051735. Steel Construction. Weight Capacity: 1000 lbs. 10" Polyolefin Wheels. Twin Handle. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Vestil, Manufacturer Part Number: DBT-P-4RS-PODesigned for moving 55 gallon steel or plastic drums. Features a spring mechanism, which allows for easier tilting of fully-loaded drums. Four-wheel design for easier drum transportation when tilted. Top loop handle allows for easier control when moving. Drum is secured to truck with an adjustable height drum hook bar. Removable drum hook bar includes built-in bung nut wrenches. Capacity is 1,000 pounds. Steel construction with powder coat finish. MFG Part# DBT-P-4RS-MR

Manufacturer: Vestil, Manufacturer Part Number: DBT-P-4RS-MRDesigned for moving 55 gallon steel or plastic drums. Features a spring mechanism, which allows for easier tilting of fully-loaded drums. Four-wheel design for easier drum transportation when tilted. Top loop handle allows for easier control when moving. Drum is secured to truck with an adjustable height drum hook bar. Removable drum hook bar includes built-in bung nut wrenches. Capacity is 1,000 pounds. Steel construction with powder coat finish. MFG Part# DBT-P-4RS-MR