Drum Lifters and Slings

Manufacturer: Wesco, Manufacturer Part Number: 240102This heavy–duty drum lifter is perfect for placing 55–gallon drums into overpacks or 85–gallon steel salvage drums. It can lift 85–gallon steel salvage drums with 55–gallon drums inside them! Heavy–gauge steel construction will support up to 1,000 pounds.SPECIFICATIONS21 lbs.1 lifter

Manufacturer: Vestil, Manufacturer Part Number: P-2496-2.625Width: 24", Length: 96", Height 2 5/8", Capacity (Pounds): 250 – Add A Levels – Raise workers to an optimum ergonomic height. Constructed from a heavy–density polyethylene resin which is 100% recycled. The flow–through grid design permits liquids and small scrap to drain away. Also good for use as storage shelf to keep products o wet floors. The stack kit allows two units to be stacked and locked together. The connector kit allows you to connect units side by side.

Manufacturer: Morse, Manufacturer Part Number: 4556-PBolt the Bracket Assembly onto the MORcinch Drum Holder to handle a plastic drum that lacks a top rim. Also recommended to more securely hold a fiber drum. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Vestil, Manufacturer Part Number: DCS-750-BLift drums in the horizontal position quickly and easily with this Drum Sling. Handle open or closed head steel drums. The large steel lifting ring accommodates most overhead lifting systems. MFG Part# DCS-750-B

Manufacturer: Vestil, Manufacturer Part Number: DCL-550The Drum Clutcher allows for easy lifting and transporting of steel drums with an overhead lifting chain or hoist. The Drum Clutcher is ideal for placing drums in secondary containment and salvage drums. Designed for steel drums with a top lip or chime. Not for use with open head drums.SPECIFICATIONSAccepts 30-Gallon Steel Drums1,000 lbs Capacity22.688" x 9.375" x 15.438" - 18 lbs.

Manufacturer: Vestil, Manufacturer Part Number: DCL-1000The Drum Clutcher allows for easy lifting and transporting of steel drums with an overhead lifting chain or hoist. The Drum Clutcher is ideal for placing drums in secondary containment and salvage drums. Designed for steel drums with a top lip or chime. Not for use with open head drums.SPECIFICATIONSAccepts 55-Gallon Steel Drums1,000 lbs Capacity24.375" x 10" x 16.5" - 23 lbs.

Manufacturer: Morse, Manufacturer Part Number: 41MDRUM LIFTING HOOK, SPARK RESISTANT, 1000 Lb. CAPACITY, INCLUDES LOAD TEST CERTIFICATE

Manufacturer: Vestil, Manufacturer Part Number: DL-31Overhead Drum Lifters may be used to lift 30 and 55–gallon steel drums with either an overhead chain or fork truck. Hook opening measures 4"W x 2"H. Steel construction with powder coat finish.SPECIFICATIONS1,500 lbs Capacity18" x 18" x 2" - 37 lbs.

Manufacturer: Morse, Manufacturer Part Number: 41Model 41 Drum Lifting Hook is used to lift a horizontal 55–gallon steel drum, 34" to 36" long. This Drum Lifting Hook has an alloy steel lifting ring, steel rods, and malleable iron hooks. It adds 10.6" to the height of your apparatus when lifting a horizontal drum (measured from the drum rim to the inside top of the lifting eye). Capacity: 1,000 Lb.SPECIFICATIONS20" x 5" x 4" - 5 lbs.

Manufacturer: Vestil, Manufacturer Part Number: DRUM-STDrum Stands provide economical and convenient portability. These stands offer a uniquely designed understructure that allows for transporting of drums with either a pallet truck or fork truck. Fork lock tabs minimize the possibility of the drum stands accidentally tipping while being transported with a fork truck. Accepts steel, plastic, and fiber 30 or 55–Gallon drums. The Drum Stand also allows for single drum stacking for easy storage of drums up to three high (empty stands are nestable and stackable). All welded steel construction. Stands include a safety yellow powder coat finish. SPECIFICATIONS1,500 lbs Capacity25" x 25" x 5" - 35 lbs.

Manufacturer: Morse, Manufacturer Part Number: 284Morse model 284 Fork Mounted Hook slides right onto one fork of your forklift so you can use a Morse below hook drum lifter. Fork opening is 5.5" X 1–9/16". Capacity: 2,000 Lb. NOTE: Model 284 Fork Hook is NOT a drum lifter. It is a fork mounted hook from which to suspend a drum lifter or other device.SPECIFICATIONS17" x 9.5" x 9.5" - 11 lbs.

Manufacturer: Vestil, Manufacturer Part Number: DCR-R-20-HCOptional Hand Crank (in place of pull chain) for the -20 Drum Carrier/ Rotators. With the hand crank unable to rotate drum from the seat of your fork truck. MFG Part# DCR-R-20-HC

Manufacturer: Vestil, Manufacturer Part Number: DCR-R-815-HCOptional Hand Crank (in place of pull chain) for the -8 and -15 Drum Carrier/ Rotators. With the hand crank unable to rotate drum from the seat of your fork truck. MFG Part# DCR-R-815-HC

Manufacturer: Vestil, Manufacturer Part Number: DCT-R-HCHand Crank for Hoist Mounted Drum Carrier/Rotator.

Manufacturer: Vestil, Manufacturer Part Number: S-FORK-4-ATConvert your fork truck into a hook with anchor in a matter of seconds. The easy to attach Hoisting Hook does not require the assistance of special tools. Secured to the fork truck by means of a long safety restraint and tine lock. Unit has baked-in powder-coated toughness. Hook with shackle included. The Auto-Tension Hoisting Hook, offers a unique design and adds tension as weight is added. MFG Part# S-FORK-4-AT

Manufacturer: Vestil, Manufacturer Part Number: WP-LH-LWork Platform Option: Web Lanyard with Safety Harness protects worker in the event of a fall.SPECIFICATIONS6 feet of lanyard350 lbs capacity12" x 12" x 12" - 12 lbs.

Manufacturer: Morse, Manufacturer Part Number: 91Morse model 91 is an effective and simple–to–use ice–tong–like Drum Lifter with thin profile grippers. The broad faced grip pads spread the holding force to minimize pressure on drum. Its narrow profile enables you to lower your drum completely into an overpack or salvage drum. Place a steel 55–gallon drum into an overpack or salvage drum. Lift a steel 85–gallon overpack drum, or a closed salvage drum. Capacity: 1,000 Lb. Each Model 91 Drum Lifter is load tested and factory certified at 125% of rated capacity as per ANSI B30.20.SPECIFICATIONS20" x 9" x 17" - 18.5 lbs.

Manufacturer: Vestil, Manufacturer Part Number: SM-LB-25Adjustable Spreader Beam Option – Additional Lower Bail for 2500 lbs. capacity model.

Manufacturer: Vestil, Manufacturer Part Number: SM-LB-40Adjustable Spreader Beam Option – Additional Lower Bail for 4000 lbs. capacity model.

Manufacturer: Vestil, Manufacturer Part Number: SM-LB-80Adjustable Spreader Beam Option – Additional Lower Bail for 8000 lbs. capacity model.

Manufacturer: Vestil, Manufacturer Part Number: EASY-50The Magnetic Easy Lift is ideal for holding products. Featuring a permanent magnet inside an aluminum housing for longevity protection, a trigger product release, and the ability to retrieve parts with temperatures up to 3⁰F

Manufacturer: Vestil, Manufacturer Part Number: FDRS-V2Dual Ratchet Strap for the Steel Drum Adapter. MFG Part# FDRS-V2

Manufacturer: UltraTech, Manufacturer Part Number: 409Drum Lifter: Securely grips 55 gallon steel drums when loading and unloading salvage drums. Rugged, all–steel construction. 25.875 x 25.875 x 5.75. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Vestil, Manufacturer Part Number: SM-UB-25Adjustable Spreader Beam Option – Additional Upper Bail for 2500 lbs. capacity model.