Manufacturer: Wizard Drum, Manufacturer Part Number: 10025This compact, portable, self–propelled model moves itself around the drum automatically and makes an inside chime cut leaving a safe burr–free edge. It is quiet, easy to use and clears all bungs. Will dehead most drums in less than 1 minute. It uses a 1/8 HP, 115V, 60 HZ single phase DC motor, (AC rectified), and is supplied with a tangle–resistant cord. This deheader will work with 30–55 gallon steel drums that are from 16–20 gauge in thickness. Designed for low to moderate steel drum volume (20–50 drums per week).SPECIFICATIONS26 lbs.1 deheader12" L x 10" W x 24" H

Manufacturer: Protec-Environmental, Manufacturer Part Number: 1600Squeeze More Performance Out Of Your Absorbents and Reclaim Valuable Fluids! The Extractor series of wringers keeps fluids in the profit stream not the waste stream. These heavy–duty wringers are built to last! Save money and reduce waste by recycling your used absorbents. Turn your Extractor–Pro into an automated unit with this optional Motor Drive Kit. Kit features heavy–duty forward and reversing motor with easy access panel switch. NEMA spec panel includes power–on light and key–operated on/off switch for added security. Foot switch is NEMA spec and is not affected by liquids. ***Motor Drive Kit Only -  DOES NOT include Extractor-Pro (AP-1500-0001)*** SPECIFICATIONS20 lbs.1 unit7" W x 10" L x 8" H

Manufacturer: Wizard Drum, Manufacturer Part Number: 3995Model J opener (blue) cuts the drum shell BELOW the chime. This model was designed for drum disposal because it removes the entire drum head. Removing both top and bottom heads of a drum makes it easy to flatten or crush the drum, store it and later sell it for scrap. This deheader does not leave a burr–free edge. Comes with a non–ferrous cutting wheel.

Manufacturer: Wizard Drum, Manufacturer Part Number: 11463Superior quality fiber drum dechimers remove metal chimes from fiber drums. With chimes removed, fiber material can be sold or converted to energy or flattened to reduce storage space and simplify handling. Works on all types and sizes of fiber drums. Removes top and bottom chimes in less than two minutes. High strength aluminum and rugged tool steel construction.

Manufacturer: Wizard Drum, Manufacturer Part Number: 3150-3153The Wizard Drum Deheading Tower keeps the drum deheader hanging to prevent accidents or cause injury to the operator. The cord is held clear of the operator by the power cord support arm, and a 360–degree electric or air swivel connector prevents the cord from tangling. It also alleviates the strain on the operator. Ring and Legs ship separately. Shipping dimensions for the ring are 33" x 33" x 4" and it weighs 24 lbs.

Manufacturer: Wizard Drum, Manufacturer Part Number: 3150-3152The Wizard Drum Deheading Tower keeps the drum deheader hanging to prevent accidents or cause injury to the operator. The cord is held clear of the operator by the power cord support arm, and a 360–degree electric or air swivel connector prevents the cord from tangling. It also alleviates the strain on the operator. Ring and Legs ship separately. Shipping dimensions for the ring are 33" x 33" x 4" and it weighs 24 lbs.

Manufacturer: Wizard Drum, Manufacturer Part Number: 3980Model J opener (blue) cuts the drum shell BELOW the chime. This model was designed for drum disposal because it removes the entire drum head. Removing both top and bottom heads of a drum makes it easy to flatten or crush the drum, store it and later sell it for scrap. This deheader does not leave a burr–free edge. Comes with a standard steel cutting wheel.

Manufacturer: Wizard Drum, Manufacturer Part Number: 3902The Model G opener (yellow) cuts on the INSIDE of the drum chime and leaves a smooth, burr–free edge for safe handling. This versatile model is considered a general purpose opener because opened drums can either be used for utility containers or sold for scrap. This model has a small, 1–1/2" diameter cutter wheel that travels between the chime and bung fittings as it cuts. It is designed to open standard, 30–55 gallon industrial drums of up to 16–gauge steel with either flat or round chime. Comes with a non–ferrous cutting wheel.

Manufacturer: Wizard Drum, Manufacturer Part Number: 3978The Model G opener (yellow) cuts on the INSIDE of the drum chime and leaves a smooth, burr–free edge for safe handling. This versatile model is considered a general purpose opener because opened drums can either be used for utility containers or sold for scrap. This model has a small, 1–1/2" diameter cutter wheel that travels between the chime and bung fittings as it cuts. It is designed to open standard, 30–55 gallon industrial drums of up to 16–gauge steel with either flat or round chime. Comes with a standard steel cutting wheel.

Manufacturer: Wizard Drum, Manufacturer Part Number: 3931Model J opener (blue) cuts the drum shell BELOW the chime. This model was designed for drum disposal because it removes the entire drum head. Removing both top and bottom heads of a drum makes it easy to flatten or crush the drum, store it and later sell it for scrap. This deheader does not leave a burr–free edge. Comes with a standard steel cutting wheel.

Manufacturer: Wizard Drum, Manufacturer Part Number: 3938Model J opener (blue) cuts the drum shell BELOW the chime. This model was designed for drum disposal because it removes the entire drum head. Removing both top and bottom heads of a drum makes it easy to flatten or crush the drum, store it and later sell it for scrap. This deheader does not leave a burr–free edge.

Manufacturer: Wizard Drum, Manufacturer Part Number: 3962Model J opener (blue) cuts the drum shell BELOW the chime. This model was designed for drum disposal because it removes the entire drum head. Removing both top and bottom heads of a drum makes it easy to flatten or crush the drum, store it and later sell it for scrap. This deheader does not leave a burr–free edge. Comes with a non–ferrous cutting wheel.

Manufacturer: Wizard Drum, Manufacturer Part Number: 3949The Model G opener (yellow) cuts on the INSIDE of the drum chime and leaves a smooth, burr–free edge for safe handling. This versatile model is considered a general purpose opener because opened drums can either be used for utility containers or sold for scrap. This model has a small, 1–1/2" diameter cutter wheel that travels between the chime and bung fittings as it cuts. It is designed to open standard, 30–55 gallon industrial drums of up to 16–gauge steel with either flat or round chime. Comes with standard steel cutting wheel.

Manufacturer: Wizard Drum, Manufacturer Part Number: 3950The Model G opener (yellow) cuts on the INSIDE of the drum chime and leaves a smooth, burr–free edge for safe handling. This versatile model is considered a general purpose opener because opened drums can either be used for utility containers or sold for scrap. This model has a small, 1–1/2" diameter cutter wheel that travels between the chime and bung fittings as it cuts. It is designed to open standard, 30–55 gallon industrial drums of up to 16–gauge steel with either flat or round chime. Comes with a non–ferrous cutting wheel.

Manufacturer: Wizard Drum, Manufacturer Part Number: 10095This compact, portable Ratchet action manual deheader requires minimal effort. The only manual drum deheader to leave a completely safe burr–free edge. Can be used left or right handed. Ideal for use in areas with no available power source. This deheader will work with 30–55 gallon steel drums that are from 16–20 gauge in thickness. Will dehead most drums in less than two minutes. Ideal for low to moderate steel drum volume (10–25 drums per week). Optional non–ferrous cutter wheel minimizes sparking potential.SPECIFICATIONS19 lbs.1 deheader12" L x 7" W x 18" H

Manufacturer: Justrite, Manufacturer Part Number: 8205 & 8214Keeping a Lid on Hazardous Vapors! Large 10 3/4” powder–coated steel funnels permit safe, rapid filling of 30– and 55–gallon drums. Can be used with flammable, non–flammable and viscous liquids. Hinged cover contains a fusible link that melts at 165°F, snapping the lid closed in case of fire. Available with or without a self–closing check valve. The self–closing check valve minimizes vapor emissions and prevents spillage if the drum is accidentally tipped over. Includes a separate brass vent adapter which fits into the 3/4" drum bung to provide pressure and vacuum–relief protection. Funnels with 6” brass flame arresters handle most needs while the funnel with a 32” brass flame arrester provides greater liquid flow. For viscous flammable or non–flammable liquids choose the funnel with a 33” non–sparking brass tube. All funnels comply with EPA and OSHA regulations and are FM approved.SPECIFICATIONS25 lbs.1 funnel w/check valve32" Non-Sparking Brass Tube

Manufacturer: Justrite, Manufacturer Part Number: 8214Drum Funnel has wide–mouth opening with hinged, stay–open lid. Built–in flame arrester on most models to prevent fire intrusion. Galvanized steel with durable epoxy powder coat finish. Self–closing in case of fire. Wide–mouth funnels are a must when transferring liquids into the relatively small 2" bung on a 30– or 55–gallon drum. Justrite offers funnels with superior safety features that make them ideal for use with solvent, thinner, oil and paint wastes. Heavy 18–gauge galvanized steel with electrostatically applied epoxy powder coat paint provides durability and chemical resistance. All funnels comply with EPA and OSHA regulations and are FM approved. Larger funnels accept a lock to prevent unauthorized access. Funnels intended for use with flammables are fitted with a brass flame arrester that absorbs and dissipates heat, preventing any external ignition source (like sparks from power tools, static electricity or cigarettes) from reaching the drum's flammable contents.

Manufacturer: Protec-Environmental, Manufacturer Part Number: 1500Squeeze More Performance Out Of Your Absorbents and Reclaim Valuable Fluids! The Extractor series of wringers keeps fluids in the profit stream not the waste stream. These heavy–duty wringers are built to last! Save money and reduce waste by recycling your used absorbents. The Extractor–Pro brings state–of–the–art capability to roller extraction. Extractor–Pro uses a unique collection base that sits atop a 55–gallon closed–head drum for the cleanest and most efficient fluid control in the industry. Built–in anti–spill/fluid indicator valve warns when five gallon capacity remains in drum. 19" Roller Width Reduces Folding Unique Feed Shelf Adjustable Chemical Resistant Rollers Quick Release Pins Great for Pads, Rolls, Socks, and Booms SPECIFICATIONS108 lbs.1 unit25" W x 25" L x 8.5" H