Drum Accessories

Manufacturer: Justrite, Manufacturer Part Number: 8005Justrite Drum Vents provide automatic pressure relief. Operating valve opens at five psig internal pressure in normal service. Vacuum relief is manual or automatic depending on the model and permits four or more gpm flow through a standard .75" faucet. All vents include a flame arrester for added safety.

Manufacturer: Justrite, Manufacturer Part Number: 8215Drum Funnel has wide–mouth opening with hinged, stay–open lid. Built–in flame arrester on most models to prevent fire intrusion. Galvanized steel with durable epoxy powder coat finish. Self–closing in case of fire. Wide–mouth funnels are a must when transferring liquids into the relatively small 2" bung on a 30– or 55–gallon drum. Justrite offers funnels with superior safety features that make them ideal for use with solvent, thinner, oil and paint wastes. Heavy 18–gauge galvanized steel with electrostatically applied epoxy powder coat paint provides durability and chemical resistance. All funnels comply with EPA and OSHA regulations and are FM approved. Larger funnels accept a lock to prevent unauthorized access. Funnels intended for use with flammables are fitted with a brass flame arrester that absorbs and dissipates heat, preventing any external ignition source (like sparks from power tools, static electricity or cigarettes) from reaching the drum's flammable contents.

Manufacturer: Justrite, Manufacturer Part Number: 8357This is a GASKET O RING (VITON) 8300/06.

Manufacturer: Justrite, Manufacturer Part Number: 08805 This is a DRUM PLUG WRENCH–85–5–5–5 BRSS. Drum Wrench opens drum bung caps. Rugged, non-sparking, corrosive-resistant tool fits many 2" or ¾" bung styles commonly used on drums. Design of handle protects the hand.

Manufacturer: Justrite, Manufacturer Part Number: 11073This is a GASKET – HOSE.

Manufacturer: Justrite, Manufacturer Part Number: 8420This is a DUCK BILL – BUNA–N.

Manufacturer: Justrite, Manufacturer Part Number: 8251This is a BUNA GASKET– 8204/8211/8213.

Manufacturer: Justrite, Manufacturer Part Number: 8011Justrite Drum Vents provide automatic pressure relief. Operating valve opens at five psig internal pressure in normal service. Vacuum relief is manual or automatic depending on the model and permits four or more gpm flow through a standard .75" faucet. All vents include a flame arrester for added safety.

Manufacturer: Justrite, Manufacturer Part Number: 8259This is a FLAT GASKET– 8204/05/07/08/13.

Manufacturer: Justrite, Manufacturer Part Number: 8015Justrite Drum Vents provide automatic pressure relief. Operating valve opens at five psig internal pressure in normal service. Vacuum relief is manual or automatic depending on the model and permits four or more gpm flow through a standard .75" faucet. All vents include a flame arrester for added safety.

Manufacturer: Justrite, Manufacturer Part Number: 8508Safely Secure Drum Contents Without the Risk of Contamination. Drum Locks are a cost effective solution to controlling storage concerns of all types of liquids, semi–liquids, and powders that come in standard drums. Made of corrosion resistant, non–sparking zinc die cast, the units easily install around the drum bung flange with no risk of cross threading. To secure the drum lock it is not necessary to remove the original bung, therefore there is no contact with the drum contents. This elimination of potential content contamination has applications across many industries, including chemical and food processing. Installs in seconds. Simply place both halves around the bung lip, slide the lock bar through the halves and then attach a padlock through the end hole of the bar. Sold as a pair, these drum locks fit the most popular style of steel and plastic 55 gallon (200L) drums. The steel set includes two units; one to fit over the 2" NPT plug, the other to fit over the ¾” NPT plug. The plastic set includes two units which fit over both 2” plugs. Both sets are available with or without a No. 3 Master Lock® padlock.SPECIFICATIONS1 lbs.1 setFor 55-Gallon Drums

Manufacturer: Justrite, Manufacturer Part Number: 8509Safely Secure Drum Contents Without the Risk of Contamination. Drum Locks are a cost effective solution to controlling storage concerns of all types of liquids, semi–liquids, and powders that come in standard drums. Made of corrosion resistant, non–sparking zinc die cast, the units easily install around the drum bung flange with no risk of cross threading. To secure the drum lock it is not necessary to remove the original bung, therefore there is no contact with the drum contents. This elimination of potential content contamination has applications across many industries, including chemical and food processing. Installs in seconds. Simply place both halves around the bung lip, slide the lock bar through the halves and then attach a padlock through the end hole of the bar. Sold as a pair, these drum locks fit the most popular style of steel and plastic 55 gallon (200L) drums. The steel set includes two units; one to fit over the 2" NPT plug, the other to fit over the ¾” NPT plug. The plastic set includes two units which fit over both 2” plugs. Both sets are available with or without a No. 3 Master Lock® padlock.SPECIFICATIONS2 lbs.1 setFor 55-Gallon Drums

Manufacturer: Justrite, Manufacturer Part Number: 27520This is a FUSIBLE LINK.⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer: Justrite, Manufacturer Part Number: 27525This is a CHAIN & CLIP ASSY for P/N 26750.

Manufacturer: Justrite, Manufacturer Part Number: 28682Drum Cover. Width: 19 In. Height: 3 1/4 In. Color: Black. Material: Polyethylene. For use with 55–gallon drums.

Manufacturer: Justrite, Manufacturer Part Number: 27526This is a HINGE PIN & COTTER KEY for P/N 26750.

Manufacturer: Justrite, Manufacturer Part Number: 28689Low–profile, wide diameter opening offers large "target" for quick, easy pouring. Molded–in hook makes a convenient way to store optional funnel cover. Scalloped, sloping design minimizes splash and prevents containers from resting in their own liquids. Large flat well at the throat of funnel allows for passive draining of paint cans, filters, buckets and other containers. Spill Control Funnels fit all closed–head 30 and 55–gallon drums.

Manufacturer: Justrite, Manufacturer Part Number: 28680Low–profile, wide diameter opening offers large "target" for quick, easy pouring. Molded–in hook makes a convenient way to store optional funnel cover. Scalloped, sloping design minimizes splash and prevents containers from resting in their own liquids. Large flat well at the throat of funnel allows for passive draining of paint cans, filters, buckets and other containers. Spill Control Funnels fit all closed head 30 and 55–gallon drums.

Manufacturer: Justrite, Manufacturer Part Number: 11002This is a ACCOPAC WASHER–ALL COV. ASSY.

Manufacturer: Justrite, Manufacturer Part Number: 11003This is a SCREW TO HOLD ACCOPAC WASHER.

Manufacturer: Justrite, Manufacturer Part Number: 11026Drum Covers provide an inexpensive way to convert open–top 30– and 55–gallon steel drums into fire–safe receptacles for combustible trash. Only a screwdriver and wrench are needed to attach the cover to a drum, and it can easily be removed when the drum must be emptied. Covers are steel, with a highly chemical–resistant powder coat paint finish. 30–gallon cover will fit drums nominally 18.375" diameter. 55–gallon size will fit drums from 22.5" to 22.75" diameter. On models 26730 and 26750, a replaceable fusible–link assembly inside the cover melts at 165°F to automatically slam the cover shut if there is a fire in the drum to extinguish the flame. To control vapors when disposing of solvent soaked rags and wipes, model 26752 offers a gasketed, latched lid to seal the drum preventing vapor release. A vent is provided to relieve pressure build–up under elevated temperatures, between 3 and 5 psig.

Manufacturer: Justrite, Manufacturer Part Number: 11025 Drum Covers provide an inexpensive way to convert open–top 30– and 55–gallon steel drums into fire–safe receptacles for combustible trash. Only a screwdriver and wrench are needed to attach the cover to a drum, and it can easily be removed when the drum must be emptied. Covers are steel, with a highly chemical–resistant powder coat paint finish. 30–gallon cover will fit drums nominally 18.375" diameter. 55–gallon size will fit drums from 22.5" to 22.75" diameter. On models 26730 and 26750, a replaceable fusible–link assembly inside the cover melts at 165°F to automatically slam the cover shut if there is a fire in the drum to extinguish the flame. To control vapors when disposing of solvent soaked rags and wipes, model 26752 offers a gasketed, latched lid to seal the drum preventing vapor release. A vent is provided to relieve pressure build–up under elevated temperatures, between 3 and 5 psig.

Manufacturer: Justrite, Manufacturer Part Number: 8181This is a 3/4" DRUM ADAPTER.

Manufacturer: Justrite, Manufacturer Part Number: 11022This is a GASKET–PT & QT COVER ASSY.