Manufacturer: Justrite, Manufacturer Part Number: 8005Justrite Drum Vents provide automatic pressure relief. Operating valve opens at five psig internal pressure in normal service. Vacuum relief is manual or automatic depending on the model and permits four or more gpm flow through a standard .75" faucet. All vents include a flame arrester for added safety.

Manufacturer: Krueger Sentry, Manufacturer Part Number: B-30-.75The Barrel Gauge Type B is a reliable, swing arm type drum gauge used for measuring all types of liquid levels. Its simple mechanical design promotes durability, minimal upkeep, quick installation, and easy/inexpensive repairs. Standard Barrel Gauge Construction – Plastic Calibration, HDPE Lock Nut, Duro Nitrile Gasket, Aluminum Bushing, Galvanized Steel Rods, Nitrophyl Floats. This is a Barrel Gauge for a 30 gallon drum, .75" NPT opening.

Manufacturer: Krueger Sentry, Manufacturer Part Number: B-30-2The Barrel Gauge Type B is a reliable, swing arm type drum gauge used for measuring all types of liquid levels. Its simple mechanical design promotes durability, minimal upkeep, quick installation, and easy/inexpensive repairs. Standard Barrel Gauge Construction – Plastic Calibration, HDPE Lock Nut, Duro Nitrile Gasket, Aluminum Bushing, Galvanized Steel Rods, Nitrophyl Floats. This is a Barrel Gauge for a 30 gallon drum, 2'' NPT opening.

Manufacturer: Krueger Sentry, Manufacturer Part Number: B-55-2-S1The Barrel Gauge Type B is a reliable, swing arm type drum gauge used for measuring all types of liquid levels. Its simple mechanical design promotes durability, minimal upkeep, quick installation, and easy/inexpensive repairs. Standard Barrel Gauge Construction – Plastic Calibration, HDPE Lock Nut, Duro Nitrile Gasket, Aluminum Bushing, Galvanized Steel Rods, Nitrophyl Floats. This is a Barrel Gauge for a 55 gallon drum, 2" NPT opening with stainless steel rods.

Manufacturer: Krueger Sentry, Manufacturer Part Number: B-55-2Barrel Gauge allows you to see how much is left in your vertical drums and is available for both 3/4" and 2" NPT bung openings. SPECIFICATIONS1 lb.1 gauge2" Bung Opening

Manufacturer: Wesco, Manufacturer Part Number: 272086Don't take chances when opening drums. This lightweight non–sparking wrench is made of a bronze alloy and can be used to remove almost any bung. It also includes a built–in 1 1/4" wrench for tightening faucets. The offset handle is designed to reduce stress and knuckle injury.SPECIFICATIONS2 lbs.1 wrench

Manufacturer: UltraTech, Manufacturer Part Number: 488Bung Access Funnel, no Spout: The Bung Access Ultra–Funnel allows access to the 3/4" drum bung. Installation of our pop–up liquid level gauge in the 3/4" bung allows visual monitoring of waste level in the drum and helps you plan ahead for drum removal. It also eliminates the mess caused by overfilling! 2.5 x 2.5 x 2.5. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: UltraTech, Manufacturer Part Number: 482The Ultimate Funnels The Bung Access funnel with its high sidewalls allows you to pour in up to 6 gallons at a time. Unique zig–zag channels prevent splashes. For use with 30 and 55–gallon drums. Hinged cover model keeps out dirt and debris and is lockable for added security. Optional Pop–Up Fill Gauge fits 3/4" bung openings and allows for quick visual monitoring to prevent overfilling. Works great with Bung Access Funnels!SPECIFICATIONS9 lbs.1 funnel23.75" Dia x 5.5" H

Manufacturer: UltraTech, Manufacturer Part Number: 497The Ultimate Funnels Global funnel fits virtually any 55–gallon steel or poly drum! High sidewalls and zig–zag channels prevent splashes. Available with or without a cover. Pop–Up Fill Gauge fits 3/4" bung openings and allows for quick visual monitoring to prevent overfilling. Works great with Global Funnels!SPECIFICATIONS13 lbs.1 funnel25.25" L x 28" W x 9" H

Manufacturer: Wesco, Manufacturer Part Number: 272303Vertical slide deheader. Open any size and gauge steel drum quickly, and easily, allowing drum recycling without the risk of fire from cutting with a torch. Sharp–edged hardened steel replaceable blade. Comfortable plastic hand grip. DEHEADER: DRUM VERTICAL SLIDE. Steel Construction. Wrench Hand Grip. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Justrite, Manufacturer Part Number: 8357This is a GASKET O RING (VITON) 8300/06.

Manufacturer: Justrite, Manufacturer Part Number: 08805 This is a DRUM PLUG WRENCH–85–5–5–5 BRSS. Drum Wrench opens drum bung caps. Rugged, non-sparking, corrosive-resistant tool fits many 2" or ¾" bung styles commonly used on drums. Design of handle protects the hand.

Manufacturer: Justrite, Manufacturer Part Number: 8508Safely Secure Drum Contents Without the Risk of Contamination. Drum Locks are a cost effective solution to controlling storage concerns of all types of liquids, semi–liquids, and powders that come in standard drums. Made of corrosion resistant, non–sparking zinc die cast, the units easily install around the drum bung flange with no risk of cross threading. To secure the drum lock it is not necessary to remove the original bung, therefore there is no contact with the drum contents. This elimination of potential content contamination has applications across many industries, including chemical and food processing. Installs in seconds. Simply place both halves around the bung lip, slide the lock bar through the halves and then attach a padlock through the end hole of the bar. Sold as a pair, these drum locks fit the most popular style of steel and plastic 55 gallon (200L) drums. The steel set includes two units; one to fit over the 2" NPT plug, the other to fit over the ¾” NPT plug. The plastic set includes two units which fit over both 2” plugs. Both sets are available with or without a No. 3 Master Lock® padlock.SPECIFICATIONS1 lbs.1 setFor 55-Gallon Drums

Manufacturer: Justrite, Manufacturer Part Number: 8509Safely Secure Drum Contents Without the Risk of Contamination. Drum Locks are a cost effective solution to controlling storage concerns of all types of liquids, semi–liquids, and powders that come in standard drums. Made of corrosion resistant, non–sparking zinc die cast, the units easily install around the drum bung flange with no risk of cross threading. To secure the drum lock it is not necessary to remove the original bung, therefore there is no contact with the drum contents. This elimination of potential content contamination has applications across many industries, including chemical and food processing. Installs in seconds. Simply place both halves around the bung lip, slide the lock bar through the halves and then attach a padlock through the end hole of the bar. Sold as a pair, these drum locks fit the most popular style of steel and plastic 55 gallon (200L) drums. The steel set includes two units; one to fit over the 2" NPT plug, the other to fit over the ¾” NPT plug. The plastic set includes two units which fit over both 2” plugs. Both sets are available with or without a No. 3 Master Lock® padlock.SPECIFICATIONS2 lbs.1 setFor 55-Gallon Drums

Manufacturer: Justrite, Manufacturer Part Number: 28682Drum Cover. Width: 19 In. Height: 3 1/4 In. Color: Black. Material: Polyethylene. For use with 55–gallon drums.

Manufacturer: Justrite, Manufacturer Part Number: 28689Low–profile, wide diameter opening offers large "target" for quick, easy pouring. Molded–in hook makes a convenient way to store optional funnel cover. Scalloped, sloping design minimizes splash and prevents containers from resting in their own liquids. Large flat well at the throat of funnel allows for passive draining of paint cans, filters, buckets and other containers. Spill Control Funnels fit all closed–head 30 and 55–gallon drums.

Manufacturer: Justrite, Manufacturer Part Number: 28680Low–profile, wide diameter opening offers large "target" for quick, easy pouring. Molded–in hook makes a convenient way to store optional funnel cover. Scalloped, sloping design minimizes splash and prevents containers from resting in their own liquids. Large flat well at the throat of funnel allows for passive draining of paint cans, filters, buckets and other containers. Spill Control Funnels fit all closed head 30 and 55–gallon drums.

Manufacturer: Justrite, Manufacturer Part Number: 11023This is a GASKET–DRUM COVER.

Manufacturer: Krueger Sentry, Manufacturer Part Number: H-1.5-54The Therma Type H Liquid Level Indicator is a reliable, swing arm type tank gauge used for measuring all types of liquid levels. Its simple mechanical design promotes durability, minimal upkeep, quick installation, and easy/inexpensive repairs. Standard Level Indicator Construction – Plastic Calibration, HDPE Lock Nut, Duro Nitrile Gasket, Aluminum Bushing, Galvanized Steel Rods, HDPE Floats. This gauge comes with 1.5" NPT opening & a 54" tank depth.

Manufacturer: Eagle, Manufacturer Part Number: 1662Drum Funnel w/Screen

Manufacturer: Eagle, Manufacturer Part Number: 1660Versatile and Economical! This all–purpose funnel has 6" high sidewalls to contain spills and splashing when pouring. Fits all 55 and 30–gallon closed–head drums. Funnel spout fits into any 2" NPT bung. Optional Funnel Cover (EL-1664-0001) keeps funnel clean and seals out contaminants. Economically priced Fits all 55 and 30–gallon closed–head drums 18" diameter allows for use of drum fill gaugeSPECIFICATIONS6.5 lbs.1 funnel18" Dia x 6" H

Manufacturer: Krueger Sentry, Manufacturer Part Number: H-1.5-42The Therma Type H Liquid Level Indicator is a reliable, swing arm type tank gauge used for measuring all types of liquid levels. Its simple mechanical design promotes durability, minimal upkeep, quick installation, and easy/inexpensive repairs. Standard Level Indicator Construction – Plastic Calibration, HDPE Lock Nut, Duro Nitrile Gasket, Aluminum Bushing, Galvanized Steel Rods, HDPE Floats. This gauge comes with 1.5" NPT opening & a 42" tank depth.

Manufacturer: Krueger Sentry, Manufacturer Part Number: H-1.5-60The Therma Type H Liquid Level Indicator is a reliable, swing arm type tank gauge used for measuring all types of liquid levels. Its simple mechanical design promotes durability, minimal upkeep, quick installation, and easy/inexpensive repairs. Standard Level Indicator Construction – Plastic Calibration, HDPE Lock Nut, Duro Nitrile Gasket, Aluminum Bushing, Galvanized Steel Rods, HDPE Floats. This gauge comes with 1.5" NPT opening & a 60" tank depth.

Manufacturer: Krueger Sentry, Manufacturer Part Number: H-1.5-44The Therma Type H Liquid Level Indicator is a reliable, swing arm type tank gauge used for measuring all types of liquid levels. Its simple mechanical design promotes durability, minimal upkeep, quick installation, and easy/inexpensive repairs. Standard Level Indicator Construction – Plastic Calibration, HDPE Lock Nut, Duro Nitrile Gasket, Aluminum Bushing, Galvanized Steel Rods, HDPE Floats. This gauge comes with 1.5" NPT opening & a 44" tank depth.