Manufacturer: Bradley, Manufacturer Part Number: S19314DCFW Complies with ANSI Standard Z358.1. Galvanized steel protected with BRADTECT safety yellow coating. Stainless steel bowl and dust cover. Universal identification sign and inspection tag included. Drench shower exceeds minimum water flow of 20 GPM at 30 PSI. Eye–Face Wash exceeds minimum water flow of 3 GPM at 30 PSI. Spintec Showerhead provides the most consistent distribution of water from a drench shower, improving user washdown. Formerly Halo model number S193140A1ABEA00. SPECIFICATIONS44 lbs.1 unit

Manufacturer: Bradley, Manufacturer Part Number: S19-310PVC FOR HARSH ENVIRONMENTS! Corrosion–Resistant Combination Shower joins a Drench Shower and Eye/Face Wash into one unit offering total body decontamination in less space. 2" heavy–wall Schedule 80 PVC pipe with all stainless steel valves and fittings provides your best choice for harsh environments. Includes a 2" socket–welded supply joint with a 6" diameter floor flange. Eye/Face Wash sprayheads are ABS plastic with a wider spray pattern to rinse eyes and face. They come complete with pop–off dust covers to protect from debris. Integral flow control assures a safe steady water flow. Eye/Face Wash activates by a 1/2" IPS stainless steel stay–open ball valve with highly visible safety yellow PVC push handle. Shower activates with 1" IPS stainless steel stay–open ball valve and stainless steel triangular pull handle. 2" IPS water supply. Comes complete with a universal identification sign and inspection tag. Meets ANSI Z358.1–1998 standards and is SEI Certified. SPECIFICATIONS35 lbs.1 unit10" Plastic Head, 10" Plastic Bowl

Manufacturer: Bradley, Manufacturer Part Number: S19-304D2BFree standing, floor mounted combination unit. 120 volt electric heat trace cable with pipe insulation regulated to -50 °F (-45.5 °C). Rated for use in Class 1 Division 2, groups B, C, and D locations. NEMA 4X standard. Galvanized steel pipe with BradTect safety yellow coating. Hand activated. 1-1/4" NPT water supply (bottom). ABS plastic showerhead and Halo eye/face wash. ABS plastic outer shell sealed with rivets. Impact resistant plastic bowl and dust cover. Universal identification sign and inspection tag included. Certified to ANSI/ISEA Z358.1 standard and cCSAus listed when installed and used properly. Manufacturer's limited warranty.

Manufacturer: Bradley, Manufacturer Part Number: S19-304D2BLFree standing, floor mounted combination unit. 120 volt electric heat trace cable with pipe insulation regulated to -50 °F (-45.5 °C). Rated for use in Class 1 Division 2, groups B, C, and D locations. NEMA 4X standard. Galvanized steel pipe with BradTect safety yellow coating. Hand activated. 1-1/4" NPT water supply (bottom). ABS plastic showerhead and Halo eye/face wash. ABS plastic outer shell sealed with rivets. Impact resistant plastic bowl and dust cover. Indicator lights display power to unit and heating cable. Universal identification sign and inspection tag included. Certified to ANSI/ISEA Z358.1 standard and cCSAus listed when installed and used properly. Manufacturer's limited warranty.

Manufacturer: Bradley, Manufacturer Part Number: S19-304D2TFree standing, floor mounted combination unit. 120 volt electric heat trace cable with pipe insulation regulated to -50 °F (-45.5 °C). Rated for use in Class 1 Division 2, groups B, C, and D locations. NEMA 4X standard. Galvanized steel pipe with BradTect safety yellow coating. Hand activated. 1-1/4" NPT water supply (top). ABS plastic showerhead and Halo eye/face wash. ABS plastic outer shell sealed with rivets. Impact resistant plastic bowl and dust cover. Universal identification sign and inspection tag included. Certified to ANSI/ISEA Z358.1 standard and cCSAus listed when installed and used properly. Manufacturer's limited warranty.

Manufacturer: Bradley, Manufacturer Part Number: S19-304D2TLFree standing, floor mounted combination unit. 120 volt electric heat trace cable with pipe insulation regulated to -50 °F (-45.5 °C). Rated for use in Class 1 Division 2, groups B, C, and D locations. NEMA 4X standard. Galvanized steel pipe with BradTect safety yellow coating. Hand activated. 1-1/4" NPT water supply (top). ABS plastic showerhead and Halo eye/face wash. ABS plastic outer shell sealed with rivets. Impact resistant plastic bowl and dust cover. Indicator lights display power to unit and heating cable. Universal identification sign and inspection tag included. Certified to ANSI/ISEA Z358.1 standard and cCSAus listed when installed and used properly. Manufacturer's limited warranty.

Manufacturer: Bradley, Manufacturer Part Number: S19-304GABFree standing, floor mounted combination unit. 120 volt electric heat trace cable with pipe insulation regulated to -50 °F (-45.5 °C). Rated for use in General Area locations. NEMA 4X standard. Galvanized steel pipe with BradTect safety yellow coating. Hand activated. 1-1/4" NPT water supply (bottom). ABS plastic showerhead and Halo eye/face wash. ABS plastic outer shell sealed with rivets. Impact resistant plastic bowl and dust cover. Universal identification sign and inspection tag included. Certified to ANSI/ISEA Z358.1 standard and cCSAus listed when installed and used properly. Manufacturer's limited warranty.

Manufacturer: Bradley, Manufacturer Part Number: S19-304GABLFree standing, floor mounted combination unit. 120 volt electric heat trace cable with pipe insulation regulated to -50 °F (-45.5 °C). Rated for use in General Area locations. NEMA 4X standard. Galvanized steel pipe with BradTect safety yellow coating. Hand activated. 1-1/4" NPT water supply (bottom). ABS plastic showerhead and Halo eye/face wash. ABS plastic outer shell sealed with rivets. Impact resistant plastic bowl and dust cover. Indicator lights display power to unit and heating cable. Universal identification sign and inspection tag included. Certified to ANSI/ISEA Z358.1 standard and cCSAus listed when installed and used properly. Manufacturer's limited warranty.

Manufacturer: Bradley, Manufacturer Part Number: S19-304GATFree standing, floor mounted combination unit. 120 volt electric heat trace cable with pipe insulation regulated to -50 °F (-45.5 °C). Rated for use in General Area locations. NEMA 4X standard. Galvanized steel pipe with BradTect safety yellow coating. Hand activated. 1-1/4" NPT water supply (top). ABS plastic showerhead and Halo eye/face wash. ABS plastic outer shell sealed with rivets. Impact resistant plastic bowl and dust cover. Universal identification sign and inspection tag included. Certified to ANSI/ISEA Z358.1 standard and cCSAus listed when installed and used properly. Manufacturer's limited warranty.

Manufacturer: Bradley, Manufacturer Part Number: S19-304GATLFree standing, floor mounted combination unit. 120 volt electric heat trace cable with pipe insulation regulated to -50 °F (-45.5 °C). Rated for use in General Area locations. NEMA 4X standard. Galvanized steel pipe with BradTect safety yellow coating. Hand activated. 1-1/4" NPT water supply (top). ABS plastic showerhead and Halo eye/face wash. ABS plastic outer shell sealed with rivets. Impact resistant plastic bowl and dust cover. Indicator lights display power to unit and heating cable. Universal identification sign and inspection tag included. Certified to ANSI/ISEA Z358.1 standard and cCSAus listed when installed and used properly. Manufacturer's limited warranty.

Manufacturer: Bradley, Manufacturer Part Number: S19-323DWall or Fixture Mounted Emergency Signaling System. Indoor and Outdoor Installation. NEMA 3R Rated. For Use With Drench Showers or Combination Units. Double Pole Double Throw (DPDT) Flow Switch in Brass Construction, 1-1/4" NPT Supply. Remote Location Hookup Possible via Contacts in Flow Switch or On Control Board. Automatic, Audible, and Visual Alarm. Minimum 2.4 GPM Flow Required. 6 Foot Cord. Universal Voltage: 90-264 AC, 50-60 Hz. Amber Signal Light and Piezo Fast Beep Horn Sound Activate When Fixture is Used. Central Control Board Powers All Options and Runs on Safe 24 V System. UL Listed.

Manufacturer: Bradley, Manufacturer Part Number: S19-324DWall or Fixture Mounted General Area Emergency Signaling System. Indoor and Outdoor Installation. NEMA 4X Rated. For Use With Drench Shower or Combination Units. Double Pole Double Throw (DPDT) Flow Switch in Brass Construction, 1-1/4" NPT Supply. Remote Location Hookup Possible via Contacts in Flow Switch and/or On Control Board. Automatic, Audible, and Visual Alarm. Minimum 2.4 GPM Flow Required. 6 Foot Cord. Universal Voltage: 90-264 AC, 50-60 Hz. Amber Signal Light and Piezo Fast Beep Horn Sound Activate When Fixture is Used. Silence Switch with Automatic Reset Included. Central Control Board Powers All Options and Runs on Safe 24 V System. UL Listed.

Manufacturer: Bradley, Manufacturer Part Number: S19-324D1DClass I, Division 1, Groups B, C and D, Explosion Proof. Fixture Mounted Emergency Signaling System. Indoor and Outdoor Installation. NEMA 4 Rated. For Use With Drench Shower or Combination Units. Double Pole Double Throw (DPDT) Flow Switch in Brass Construction, 1-1/4" NPT Supply. Remote Location Hookup Possible via Contacts in Flow Switch and/or On Control Board. Automatic, Audible, and Visual Alarm. Minimum 2.4 GPM Flow Required. 3 and 6 Foot Cord Supplied for Connections to Flow Switch and Power Supply. Universal Voltage: 90-264 AC, 50-60 Hz. Amber Signal Light and Piezo Fast Beep Horn Sound Activate When Fixture is Used. Central Control Board Powers All Options and Runs on Safe 24 V System. UL Listed.

Manufacturer: Bradley, Manufacturer Part Number: S19-324D1DHTClass I, Division 1, Groups B, C and D, Explosion Proof. Heat Trace Mounted Emergency Signaling System. Indoor and Outdoor Installation. NEMA 4X Rated. For Use With Drench Shower or Combination Units. Double Pole Double Throw (DPDT) Flow Switch in Brass Construction, 1-1/4" NPT Supply. Remote Location Hookup Possible via Contacts in Flow Switch and/or On Control Board. Automatic, Audible, and Visual Alarm. Minimum 2.4 GPM Flow Required. 3 and 6 Foot Cord Supplied for Connections to Flow Switch and Power Supply. Universal Voltage: 90-264 AC, 50-60 Hz. Amber Signal Light and Piezo Fast Beep Horn Sound Activate When Fixture is Used. Central Control Board Powers All Options and Runs on Safe 24 V System. UL Listed.

Manufacturer: Bradley, Manufacturer Part Number: S19-324D2DClass I, Division 2, Groups B, C and D, Explosion Proof. Wall or Fixture Mounted Emergency Signaling System. Indoor and Outdoor Installation. NEMA 4 Rated. For Use With Drench Showers or Combination Units. Double Pole Double Throw (DPDT) Flow Switch in Brass Construction, 1-1/4" NPT Supply. Remote Location Hookup Possible via Contacts in Flow Switch and/or On Control Board. Automatic, Audible, and Visual Alarm. Minimum 2.4 GPM Flow Required. 3 and 6 Foot Cord Supplied for Connections to Flow Switch and Power Supply. Universal Voltage: 90-264 AC, 50-60 Hz. Amber Signal Light and Piezo Fast Beep Horn Sound Activate When Fixture is Used. Central Control Board Powers All Options and Runs on Safe 24 V System. UL Listed.

Manufacturer: Bradley, Manufacturer Part Number: S19-324D2DHTClass I, Division 2, Groups B, C and D, Explosion Proof. Heat Trace Mounted Emergency Signaling System. Indoor and Outdoor Installation. NEMA 4X Rated. For Use With Drench Showers or Combination Units. Double Pole Double Throw (DPDT) Flow Switch in Brass Construction, 1-1/4" NPT Supply. Remote Location Hookup Possible via Contacts in Flow Switch and/or On Control Board. Automatic, Audible, and Visual Alarm. Minimum 2.4 GPM Flow Required. 3 and 6 Foot Cord Supplied for Connections to Flow Switch and Power Supply. Universal Voltage: 90-264 AC, 50-60 Hz. Amber Signal Light and Piezo Fast Beep Horn Sound Activate When Fixture is Used. Central Control Board Powers All Options and Runs on Safe 24 V System. UL Listed.

Manufacturer: Bradley, Manufacturer Part Number: S19-324DGWall or Fixture Mounted General Area Emergency Signaling System. Indoor and Outdoor Installation. NEMA 4X Rated. For Use With Drench Shower or Combination Units. Double Pole Double Throw (DPDT) Flow Switch in Brass Construction, 1-1/4" NPT Supply. Remote Location Hookup Possible via Contacts in Flow Switch and/or On Control Board. Automatic, Audible, and Visual Alarm. Minimum 2.4 GPM Flow Required. 6 Foot Cord. Universal Voltage: 90-264 AC, 50-60 Hz. Amber Signal Light and Piezo Fast Beep Horn Sound Activate When Fixture is Used. Silence Switch with Automatic Reset and Green Beacon Light Included. Central Control Board Powers All Options and Runs on Safe 24 V System. UL Listed.

Manufacturer: Bradley, Manufacturer Part Number: S19-324DGWWall or Fixture Mounted General Area Emergency Signaling System. Indoor and Outdoor Installation. NEMA 4X Rated. For Use With Drench Shower or Combination Units. Double Pole Double Throw (DPDT) Flow Switch in Brass Construction, 1-1/4" NPT Supply. Remote Location Hookup Possible via Contacts in Flow Switch and/or On Control Board. Automatic, Audible, and Visual Alarm. Minimum 2.4 GPM Flow Required. 6 Foot Cord. Universal Voltage: 90-264 AC, 50-60 Hz. Amber Signal Light and Piezo Fast Beep Horn Sound Activate When Fixture is Used. Silence Switch with Automatic Reset, Green Beacon Light, and White Area Light Included. Central Control Board Powers All Options and Runs on Safe 24 V System. UL Listed

Manufacturer: Bradley, Manufacturer Part Number: S19-110SSFREE STANDING DRENCH SHOWER, ALL STAINLESS STEEL, 1 1/4" NPT WATER SUPPLY ALL STAINLESS FOR HIGHLY CORROSIVE ENVIRONMENTS, STAY OPEN VALVES, SHOWER HEAD W/ 20 GPM FLOW CONTROL CONSERVES WATER, INCLUDES SAFETY SIGN AND INSPECTION TAG. ANSI Z358.1 COMPLIANT, SEI, cUPC CERTIFIED. Kit: NO.

Manufacturer: Bradley, Manufacturer Part Number: S23-1061WALL MOUNT SHOWER, 18–GAUGE, TYPE 304 STAINLESS STEEL, PIVOTING SHOWERHEAD, HAND HELD SHOWER SPRAY, 1/2" NPT CONNECTIONS, 2 GPM FLOW CONTROL, SINGLE USER, ADA COMPLIANT 18–GAUGE, TYPE 304 STAINLESS STEEL, HINGE ACCESS PANEL, 2.0 GPM FLOW CONTROL SHOWERHEAD CONSERVES WATER, HAND HELD SHOWER SPRAY, PREASSEMBLED FOR QUICK AND EASY INSTALLATION. ADA COMPLIANT. Kit: NO.

Manufacturer: Hughes, Manufacturer Part Number: 18G45GCovered bowl ensures that the eyewash nozzles and bowl remain clean and free from contamination at all times—no dust covers needed Twin aerated diffusers with fine mesh strainers and an individual flow controller provide a soft, scrubbing action to the eyes and face Removable, self-draining nozzle constructed from a durable nylon material High-performance quarter-turn ball valve made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Includes a universal eye wash and safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements Be prepared to respond to accidents with this all-in-one floor mounted combination safety shower with bottom water inlet that provides initial on-site treatment to eye/face or full body exposure to hazards. Suitable for use in applications that are not subject to the possibility of freezing or overheating. The system features a specially designed valve that includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. Designed for high flow rates that meet or exceed ANSI standards, the nozzle offers optimal spray distribution for user protection. Unlike shower rose designs, this compact nozzle reduces the potential for insect nesting and eliminates high replacement costs associated with cracked or dented plastic spray heads. Made of durable, corrosion-resistant acrylic capped ABS, the eye/face wash with high, ANSI-compliant flow rate features an integral lid connected to the water valve for automatic operation—activate by simply pulling down the lid. Easy-to-reach flow regulator valve positioned on the side of the bowl adjusts to suit the severity of the accident. Solid construction using galvanized mild steel pipework. Add optional foot treadle for a secondary means of eye wash activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: Acrylic-Capped ABS PlasticActivation: Shower: Pull Handle, Eye/Face wash: Pull Lid ForwardMaterial Specifications: Nozzle: Nylon 6, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: 18G45GTCovered bowl ensures that the eyewash nozzles and bowl remain clean and free from contamination at all times—no dust covers needed Twin aerated diffusers with fine mesh strainers and an individual flow controller provide a soft, scrubbing action to the eyes and face Removable, self-draining nozzle constructed from a durable nylon material High-performance quarter-turn ball valve made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Includes a universal eye wash and safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements Be prepared to respond to accidents with this all-in-one floor mounted combination safety shower with top water inlet that provides initial on-site treatment to eye/face or full body exposure to hazards. Suitable for use in applications that are not subject to the possibility of freezing or overheating. The system features a specially designed valve that includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. Designed for high flow rates that meet or exceed ANSI standards, the nozzle offers optimal spray distribution for user protection. Unlike shower rose designs, this compact nozzle reduces the potential for insect nesting and eliminates high replacement costs associated with cracked or dented plastic spray heads. Made of durable, corrosion-resistant acrylic capped ABS, the eye/face wash with high, ANSI-compliant flow rate features an integral lid connected to the water valve for automatic operation—activate by simply pulling down the lid. Easy-to-reach flow regulator valve positioned on the side of the bowl adjusts to suit the severity of the accident. Solid construction using galvanized mild steel pipework. Add optional foot treadle for a secondary means of eye wash activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: Acrylic-Capped ABS PlasticActivation: Shower: Pull Handle, Eye/Face wash: Pull Lid ForwardMaterial Specifications: Nozzle: Nylon 6, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: 18GS45GCovered bowl ensures that the eyewash nozzles and bowl remain clean and free from contamination at all times—no dust covers needed Twin aerated diffusers with fine mesh strainers and an individual flow controller provide a soft, scrubbing action to the eyes and face Removable, self-draining nozzle constructed from a durable nylon material High-performance quarter-turn ball valve made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Includes a universal eye wash and safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements Be prepared to respond to accidents with this all-in-one floor mounted combination safety shower with bottom water inlet that provides initial on-site treatment to eye/face or full body exposure to hazards. Suitable for use in applications that are not subject to the possibility of freezing or overheating. The system features a specially designed valve that includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. Designed for high flow rates that meet or exceed ANSI standards, the nozzle offers optimal spray distribution for user protection. Unlike shower rose designs, this compact nozzle reduces the potential for insect nesting and eliminates high replacement costs associated with cracked or dented plastic spray heads. Made of durable, corrosion-resistant acrylic capped ABS, the eye/face wash with high, ANSI-compliant flow rate features an integral lid connected to the water valve for automatic operation—activate by simply pulling down the lid. Easy-to-reach flow regulator valve positioned on the side of the bowl adjusts to suit the severity of the accident. Solid construction using stainless steel pipework for added corrosion resistance. Add optional foot treadle for a secondary means of eye wash activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: Acrylic-Capped ABS PlasticActivation: Shower: Pull Handle, Eye/Face wash: Pull Lid ForwardMaterial Specifications: Nozzle: Nylon 6, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: 18GS45GTCovered bowl ensures that the eyewash nozzles and bowl remain clean and free from contamination at all times—no dust covers needed Twin aerated diffusers with fine mesh strainers and an individual flow controller provide a soft, scrubbing action to the eyes and face Removable, self-draining nozzle constructed from a durable nylon material High-performance quarter-turn ball valve made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Includes a universal eye wash and safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements Be prepared to respond to accidents with this all-in-one floor mounted combination safety shower with top water inlet that provides initial on-site treatment to eye/face or full body exposure to hazards. Suitable for use in applications that are not subject to the possibility of freezing or overheating. The system features a specially designed valve that includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. Designed for high flow rates that meet or exceed ANSI standards, the nozzle offers optimal spray distribution for user protection. Unlike shower rose designs, this compact nozzle reduces the potential for insect nesting and eliminates high replacement costs associated with cracked or dented plastic spray heads. Made of durable, corrosion-resistant acrylic capped ABS, the eye/face wash with high, ANSI-compliant flow rate features an integral lid connected to the water valve for automatic operation—activate by simply pulling down the lid. Easy-to-reach flow regulator valve positioned on the side of the bowl adjusts to suit the severity of the accident. Solid construction using stainless steel pipework for added corrosion resistance. Add optional foot treadle for a secondary means of eye wash activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: Acrylic-Capped ABS PlasticActivation: Shower: Pull Handle, Eye/Face wash: Pull Lid ForwardMaterial Specifications: Nozzle: Nylon 6, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.