Dock Plates

Manufacturer: Vestil, Manufacturer Part Number: BTA-06005484Uniform Capacity (lbs.): 6000, Height Difference (in.) at 8 degree/17%: 10, Height Difference (in.) at 11 degrees/19%: 14, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 49–1/2, Usable Length (in.) : 84 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-08005484Uniform Capacity (lbs.): 8000, Height Difference (in.) at 8 degree/17%: 10, Height Difference (in.) at 11 degrees/19%: 14, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 47–3/4, Usable Length (in.) : 84 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: PU-1000-SCBDescription: 6 ft W x 10 ft L (Dockleveler Unit with Legs for in Front of Dock Placement), Capacity: 20000 lbs. – Truck Actuated Docklevelers – Details: fully automated loading ramp, 55,000 psi high strength checker plate deck, toeguards on each side, (2) molded bumpers (5"W x 16"H x 6"D), no dock attendant needed, 12" long lip (extends 6–1/2" into truck), service range or 14" above and 8" below dock, lift by–pass for safety – Operation: Truck backs against twin actuating arms (bumpers) pushing carriage back (dock and trailer door must be raised). As carriage goes back, deck goes up. When the carriage and trailer door must be raised). As carriage goes back, deck goes up. When the carriage bumpers contact dock, the deck floats down to rest on trailer. When truck pulls out, deck returns to level supported position automatically. Capacities available up to 100,000 pounds.

Manufacturer: Vestil, Manufacturer Part Number: RU-1000-SCBDescription: 6 ft W x 10 ft L Recessed Unit – Truck Actuated Docklevelers – Details: fully automated loading ramp, 55,000 psi high strength checker plate deck, toeguards on each side, (2) molded bumpers (5"W x 16"H x 6"D), no dock attendant needed, 12" long lip (extends 6–1/2" into truck), service range or 14" above and 8" below dock, lift by–pass for safety – Operation: Truck backs against twin actuating arms (bumpers) pushing carriage back (dock and trailer door must be raised). As carriage goes back, deck goes up. When the carriage and trailer door must be raised). As carriage goes back, deck goes up. When the carriage bumpers contact dock, the deck floats down to rest on trailer. When truck pulls out, deck returns to level supported position automatically. Capacities available up to 100,000 pounds.

Manufacturer: Vestil, Manufacturer Part Number: PU-600-SCBDescription: 6 ft W x 6 ft L (Dockleveler Unit with Legs for in Front of Dock Placement), Capacity: 20000 lbs. – Truck Actuated Docklevelers – Details: fully automated loading ramp, 55,000 psi high strength checker plate deck, toeguards on each side, (2) molded bumpers (5"W x 16"H x 6"D), no dock attendant needed, 12" long lip (extends 6–1/2" into truck), service range or 14" above and 8" below dock, lift by–pass for safety – Operation: Truck backs against twin actuating arms (bumpers) pushing carriage back (dock and trailer door must be raised). As carriage goes back, deck goes up. When the carriage and trailer door must be raised). As carriage goes back, deck goes up. When the carriage bumpers contact dock, the deck floats down to rest on trailer. When truck pulls out, deck returns to level supported position automatically. Capacities available up to 100,000 pounds.

Manufacturer: Vestil, Manufacturer Part Number: SU-600-SCBDescription: 6 ft W x 6 ft L Recessed Unit with Legs, Full 48" Deep Pit – Truck Actuated Docklevelers – Details: fully automated loading ramp, 55,000 psi high strength checker plate deck, toeguards on each side, (2) molded bumpers (5"W x 16"H x 6"D), no dock attendant needed, 12" long lip (extends 6–1/2" into truck), service range or 14" above and 8" below dock, lift by–pass for safety – Operation: Truck backs against twin actuating arms (bumpers) pushing carriage back (dock and trailer door must be raised). As carriage goes back, deck goes up. When the carriage and trailer door must be raised). As carriage goes back, deck goes up. When the carriage bumpers contact dock, the deck floats down to rest on trailer. When truck pulls out, deck returns to level supported position automatically. Capacities available up to 100,000 pounds.

Manufacturer: Vestil, Manufacturer Part Number: RU-600-SCBDescription: 6 ft W x 6 ft L Recessed Unit, Standard 28" Deep Pit– Truck Actuated Docklevelers – Details: fully automated loading ramp, 55,000 psi high strength checker plate deck, toeguards on each side, (2) molded bumpers (5"W x 16"H x 6"D), no dock attendant needed, 12" long lip (extends 6–1/2" into truck), service range or 14" above and 8" below dock, lift by–pass for safety – Operation: Truck backs against twin actuating arms (bumpers) pushing carriage back (dock and trailer door must be raised). As carriage goes back, deck goes up. When the carriage and trailer door must be raised). As carriage goes back, deck goes up. When the carriage bumpers contact dock, the deck floats down to rest on trailer. When truck pulls out, deck returns to level supported position automatically. Capacities available up to 100,000 pounds.

Manufacturer: Vestil, Manufacturer Part Number: PU-800-SCBDescription: 6 ft W x 8 ft L (Dockleveler Unit with Legs for in Front of Dock Placement), Capacity: 20000 lbs. – Truck Actuated Docklevelers – Details: fully automated loading ramp, 55,000 psi high strength checker plate deck, toeguards on each side, (2) molded bumpers (5"W x 16"H x 6"D), no dock attendant needed, 12" long lip (extends 6–1/2" into truck), service range or 14" above and 8" below dock, lift by–pass for safety – Operation: Truck backs against twin actuating arms (bumpers) pushing carriage back (dock and trailer door must be raised). As carriage goes back, deck goes up. When the carriage and trailer door must be raised). As carriage goes back, deck goes up. When the carriage bumpers contact dock, the deck floats down to rest on trailer. When truck pulls out, deck returns to level supported position automatically. Capacities available up to 100,000 pounds.

Manufacturer: Vestil, Manufacturer Part Number: SU-800-SCBDescription: 6 ft W x 8 ft L Recessed Unit with Legs – Truck Actuated Docklevelers – Details: fully automated loading ramp, 55,000 psi high strength checker plate deck, toeguards on each side, (2) molded bumpers (5"W x 16"H x 6"D), no dock attendant needed, 12" long lip (extends 6–1/2" into truck), service range or 14" above and 8" below dock, lift by–pass for safety – Operation: Truck backs against twin actuating arms (bumpers) pushing carriage back (dock and trailer door must be raised). As carriage goes back, deck goes up. When the carriage and trailer door must be raised). As carriage goes back, deck goes up. When the carriage bumpers contact dock, the deck floats down to rest on trailer. When truck pulls out, deck returns to level supported position automatically. Capacities available up to 100,000 pounds.

Manufacturer: Vestil, Manufacturer Part Number: RU-800-SCBDescription: 6 ft W x 8 ft L – Truck Actuated Docklevelers – Details: fully automated loading ramp, 55,000 psi high strength checker plate deck, toeguards on each side, (2) molded bumpers (5"W x 16"H x 6"D), no dock attendant needed, 12" long lip (extends 6–1/2" into truck), service range or 14" above and 8" below dock, lift by–pass for safety – Operation: Truck backs against twin actuating arms (bumpers) pushing carriage back (dock and trailer door must be raised). As carriage goes back, deck goes up. When the carriage and trailer door must be raised). As carriage goes back, deck goes up. When the carriage bumpers contact dock, the deck floats down to rest on trailer. When truck pulls out, deck returns to level supported position automatically. Capacities available up to 100,000 pounds.

Manufacturer: Vestil, Manufacturer Part Number: SU-800-SCB-FDescription: 6 ft W x 8 ft 6 in L Recessed Unit with Legs – Truck Actuated Docklevelers – Details: fully automated loading ramp, 55,000 psi high strength checker plate deck, toeguards on each side, (2) molded bumpers (5"W x 16"H x 6"D), no dock attendant needed, 12" long lip (extends 6–1/2" into truck), service range or 14" above and 8" below dock, lift by–pass for safety – Operation: Truck backs against twin actuating arms (bumpers) pushing carriage back (dock and trailer door must be raised). As carriage goes back, deck goes up. When the carriage and trailer door must be raised). As carriage goes back, deck goes up. When the carriage bumpers contact dock, the deck floats down to rest on trailer. When truck pulls out, deck returns to level supported position automatically. Capacities available up to 100,000 pounds.

Manufacturer: Vestil, Manufacturer Part Number: RU-800-SCB-FDescription: 6 ft W x 8 ft, 6 in L – Truck Actuated Docklevelers – Details: fully automated loading ramp, 55,000 psi high strength checker plate deck, toeguards on each side, (2) molded bumpers (5"W x 16"H x 6"D), no dock attendant needed, 12" long lip (extends 6–1/2" into truck), service range or 14" above and 8" below dock, lift by–pass for safety – Operation: Truck backs against twin actuating arms (bumpers) pushing carriage back (dock and trailer door must be raised). As carriage goes back, deck goes up. When the carriage and trailer door must be raised). As carriage goes back, deck goes up. When the carriage bumpers contact dock, the deck floats down to rest on trailer. When truck pulls out, deck returns to level supported position automatically. Capacities available up to 100,000 pounds.

Manufacturer: Vestil, Manufacturer Part Number: RR-610-25Capacity: 25,000 lbs., Overall Size w/ Lip: 6'W x 10'4"L, Operation: Pull Chain – Mechanical Docklevelers – All heavy duty construction features 1/4" checkered plate deck (55,000 PSI) steel. 6" structural steel support understructure for long life. Lip is 16" long. Includes telescopic steel toe guards on both sides, flush with platform edge. Service range 12" above and below dock. Includes (2) laminated bumpers.

Manufacturer: Vestil, Manufacturer Part Number: RR-65-25Capacity: 25,000 lbs., Overall Size w/ Lip: 6'W x 5'4"L, Operation: Pull Chain – Mechanical Docklevelers – All heavy duty construction features 1/4" checkered plate deck (55,000 PSI) steel. 6" structural steel support understructure for long life. Lip is 16" long. Includes telescopic steel toe guards on both sides, flush with platform edge. Service range 12" above and below dock. Includes (2) laminated bumpers.

Manufacturer: Vestil, Manufacturer Part Number: RR-66-25Capacity: 25,000 lbs., Overall Size w/ Lip: 6'W x 6'4"L, Operation: Pull Chain – Mechanical Docklevelers – All heavy duty construction features 1/4" checkered plate deck (55,000 PSI) steel. 6" structural steel support understructure for long life. Lip is 16" long. Includes telescopic steel toe guards on both sides, flush with platform edge. Service range 12" above and below dock. Includes (2) laminated bumpers.

Manufacturer: Vestil, Manufacturer Part Number: RR-68-25Capacity: 25,000 lbs., Overall Size w/ Lip: 6'W x 8'4"L, Operation: Pull Chain – Mechanical Docklevelers – All heavy duty construction features 1/4" checkered plate deck (55,000 PSI) steel. 6" structural steel support understructure for long life. Lip is 16" long. Includes telescopic steel toe guards on both sides, flush with platform edge. Service range 12" above and below dock. Includes (2) laminated bumpers.

Manufacturer: Vestil, Manufacturer Part Number: BTA-15006036Size (W x L): 60" x 36", Ht. Difference (8°/17%): 4", Ht. Difference (11°/19%): 5", Capacity: 15,000 lbs – Aluminum Truck Dockboards with Welded Aluminum Curbs – Engineered and built to maximize safety while handling heavy fork trucks and loads. Locking legs prevent movement during loading and unloading operations. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Bend is 11° and 9" from the edge and the legs are 12" from the edge. Manufactured in compliance with OSHA.

Manufacturer: Vestil, Manufacturer Part Number: BTA-20006036Size (W x L): 60" x 36", Ht. Difference (8°/17%): 4", Ht. Difference (11°/19%): 5", Capacity: 20,000 lbs – Aluminum Truck Dockboards with Welded Aluminum Curbs – Engineered and built to maximize safety while handling heavy fork trucks and loads. Locking legs prevent movement during loading and unloading operations. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Bend is 11° and 9" from the edge and the legs are 12" from the edge. Manufactured in compliance with OSHA.

Manufacturer: Vestil, Manufacturer Part Number: TS-15-6036Capacity: 15,000 lbs., Overall Size: 60"W x 36"L, Height Difference: 5" – Steel Truck Dockboard – Constructed of high strength (55,000 psi) steel for long life. Beveled edges on both ends permit smooth entry and exit. Deck is diamond plated for safe, efficient use. Welded safety curbs for maximum strength. Locking legs minimize ramp movement and are uneven to allow the dockboard to sit canted for easier floor pickup by forklifts. Standard with leverlift for quick portability with fork truck. Optional accessories: lifting chains, span locks, span pins/holes and removable pickup loops. Manufactured in compliance with OSHA.

Manufacturer: Vestil, Manufacturer Part Number: TS-20-6036Capacity: 20,000 lbs., Overall Size: 60"W x 36"L, Height Difference: 5" – Steel Truck Dockboard – Constructed of high strength (55,000 psi) steel for long life. Beveled edges on both ends permit smooth entry and exit. Deck is diamond plated for safe, efficient use. Welded safety curbs for maximum strength. Locking legs minimize ramp movement and are uneven to allow the dockboard to sit canted for easier floor pickup by forklifts. Standard with leverlift for quick portability with fork truck. Optional accessories: lifting chains, span locks, span pins/holes and removable pickup loops. Manufactured in compliance with OSHA.

Manufacturer: Vestil, Manufacturer Part Number: TS-25-6036Capacity: 25,000 lbs., Overall Size: 60"W x 36"L, Height Difference: 5" – Steel Truck Dockboard – Constructed of high strength (55,000 psi) steel for long life. Beveled edges on both ends permit smooth entry and exit. Deck is diamond plated for safe, efficient use. Welded safety curbs for maximum strength. Locking legs minimize ramp movement and are uneven to allow the dockboard to sit canted for easier floor pickup by forklifts. Standard with leverlift for quick portability with fork truck. Optional accessories: lifting chains, span locks, span pins/holes and removable pickup loops. Manufactured in compliance with OSHA.

Manufacturer: Vestil, Manufacturer Part Number: TAS-15-6048Capacity: 15,000 lbs., Overall Size: 60"W x 48"L, Height Difference: 7" – Aluminum Truck Dockboards with Steel Safety Curbs – This dockboard is designed for portability and safety. Deck is made of tough high strength aluminum treadplate. Safety curbs are painted yellow and are constructed of structural steel with cast tapered ends. Steel legs are bolted for increased durability. Canted locking legs for easier fork truck portability. Manufactured in compliance of OSHA.

Manufacturer: Vestil, Manufacturer Part Number: TAS-20-6048Capacity: 20,000 lbs., Overall Size: 60"W x 48"L, Height Difference: 7" – Aluminum Truck Dockboards with Steel Safety Curbs – This dockboard is designed for portability and safety. Deck is made of tough high strength aluminum treadplate. Safety curbs are painted yellow and are constructed of structural steel with cast tapered ends. Steel legs are bolted for increased durability. Canted locking legs for easier fork truck portability. Manufactured in compliance of OSHA.

Manufacturer: Vestil, Manufacturer Part Number: BTA-10006048Size (W x L): 60" x 48", Ht. Difference (8°/17%): 5", Ht. Difference (11°/19%): 7", Capacity: 10,000 lbs – Aluminum Truck Dockboards with Welded Aluminum Curbs – Engineered and built to maximize safety while handling heavy fork trucks and loads. Locking legs prevent movement during loading and unloading operations. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Bend is 11° and 9" from the edge and the legs are 12" from the edge. Manufactured in compliance with OSHA.