Manufacturer: Vestil, Manufacturer Part Number: CB-S-2SCylinder Capacity (quantity): 2, Maximum Cylinder Diameter (in.): 12, Construction: Steel, Finish : Powder Coat Blue – The floor–mount Cylinder Bracket is easy to install and designed for easy consumer use. Simply bolt to the floor and secure cylinder with strap. Edges are protected with rubber guards. Formed steel construction. Stands feature a powder–coat blue finish, steel brackets feature gray painted finish.

Manufacturer: Vestil, Manufacturer Part Number: CYL-M-10This Manual Cylinder Lifter is easy to use and allows for safely lifting cylinders. The pivoting design grabs and squeezes the cylinder when lifted. The lifter has a rubber-coated center and handle holes. Steel construction with a powder-coat yellow finish. MFG Part# CYL-M-10

Manufacturer: Vestil, Manufacturer Part Number: SACR-2A cylinder storage stand is great for additional cylinders that are both used and unused. The sturdy steel construction with a bright yellow and blue finish endorses visibility of the unit, both near and far. Two cylinders are able to be stood in a secure position due to the shaped steel and safety chain. The unit can be secured to the floor by utilizing the pre drilled mounting holes at the base of the stand. MFG Part# SACR-2

Manufacturer: Vestil, Manufacturer Part Number: CYL-M-9Handles Cylinder Diameter (in.): 9, Construction: Steel, Finish: Powder Coat Yellow, Folded Degree : 105, Maximum Cylinder Diameter (in.): 9 – This Manual Cylinder Lifter is easy to use and allows for safely lifting cylinders. The pivoting design grabs and squeezes the cylinder when lifted. The lifter has a rubber–coated center and handle holes. Steel construction with a powder–coat yellow finish.

Manufacturer: Vestil, Manufacturer Part Number: CYL-M-7Lifting Aid Handles Cylinder Diameter (in.): 7, Construction: Steel, Finish: Powder Coat Yellow, Folded Degree : 105, Maximum Cylinder Diameter (in.): 7 – This Manual Cylinder Lifter is easy to use and allows for safely lifting cylinders. The pivoting design grabs and squeezes the cylinder when lifted. The cylinder lifting device has a rubber–coated center and handle holes. Steel construction with a powder–coat yellow finish.

Manufacturer: Vestil, Manufacturer Part Number: BTX-LPThe LP Tank Lift is a great addition to the manufacturing and maintenance facilities. The lifter is constructed of powder coated steel for supreme strength and durability throughout daily use. The unit also contains a bright finish for both security and discernibility, both indoors and out. To use simply attach the lifter to a lifting device, such as a fork truck, by utilizing the centrally located chain/hook opening. Once the unit is secured, place the arms tightly under the top and base ridges of the LP tank, lift to the desired height, and transport to the preferred location. MFG Part# BTX-LP

Manufacturer: Vestil, Manufacturer Part Number: CYL-DLX-1-PNMaximum Cylinder Diameter (in.): 11–1/2, Nose Plate Width (in.): 12, Nose Plate Depth (in.): 15–1/2, Wheel Diameter (in.): 10, Wheel Width (in.): 3–1/2, Wheel Type: Pneumatic, Roller Guide Height (in.): 4, Roller Guide Width (in.): 1–1/4, Roller Type: Hard Rubber, Wheel (quantity): 2, Roller (quantity): 2 – The Cylinder Dolly transports cylinders from workstation to workstation. This deluxe version feature roller guides attached to the nose plate. The hard rubber roller guides allow for easier entry onto the nose plate. Secure the cylinder with the included restraint chains. Tilt unit back and transport.

Manufacturer: Vestil, Manufacturer Part Number: CYL-D-1-PNMaximum Cylinder Diameter (in.): 11–1/2, Nose Plate Width (in.): 12, Nose Plate Depth (in.): 15–1/2, Wheel Diameter (in.): 10, Wheel Width (in.): 3–1/2, Wheel Type: Pneumatic, Wheel (quantity): 2 – The Cylinder Dolly transports cylinders from workstation to workstation. Secure the cylinder with the included restraint chains. Tilt unit back and transport.

Manufacturer: Vestil, Manufacturer Part Number: CYHT-1Ideal for transporting cylinders from storage to work space. Capable of handling two 9" cylinders. Chains provide utmost safety. Tilt back design for effortless transportation.

Manufacturer: Vestil, Manufacturer Part Number: CYL-D-1-HRMaximum Cylinder Diameter (in.): 11–1/2, Nose Plate Width (in.): 12, Nose Plate Depth (in.): 15–1/2, Wheel Diameter (in.): 10, Wheel Width (in.): 2–1/2, Wheel Type: Hard Rubber, Wheel (quantity): 2 – The Cylinder Dolly transports cylinders from workstation to workstation. Secure the cylinder with the included restraint chains. Tilt unit back and transport.

Manufacturer: Vestil, Manufacturer Part Number: CYL-DLX-1-HRMaximum Cylinder Diameter (in.): 11–1/2, Nose Plate Width (in.): 12, Nose Plate Depth (in.): 15–1/2, Wheel Diameter (in.): 10, Wheel Width (in.): 2–1/2, Wheel Type: Hard Rubber, Roller Guide Height (in.): 4, Roller Guide Width (in.): 1–1/4, Roller Type: Hard Rubber, Wheel (quantity): 2, Roller (quantity): 2 – The Cylinder Dolly transports cylinders from workstation to workstation. This deluxe version feature roller guides attached to the nose plate. The hard rubber roller guides allow for easier entry onto the nose plate. Secure the cylinder with the included restraint chains. Tilt unit back and transport.

Manufacturer: Enpac, Manufacturer Part Number: SC-7203-00016–Pack Ramp Attaches to the 6–Pack Cylinder Rack for easy maneuvering of cylinders. Folds up to minimize space.⚠ WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.SPECIFICATIONS600 lbs. Load Bearing Capacity - 20 lbs.1 ramp46" L x 20" W x 6" H

Manufacturer: Enpac, Manufacturer Part Number: SC-7212-0001The ideal solution. Maximize plant floor space with our 2–Cylinder Poly–Stand. This wall–mounted stand is your low cost way to store one or two cylinders. Resists sparking and accommodates cylinder diameters of 3" to 12 3/8". Meets OSHA 29 CFR.1910 regulations.⚠ WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.SPECIFICATIONS400 lbs. Load Bearing Capacity - 14 lbs.1 stand28" L x 14" W x 30" H

Manufacturer: Enpac, Manufacturer Part Number: SC-7204-0001GRAB HOLD OF THE ULTIMATE 6–PACK! Maximize floor space while eliminating clutter and safety hazards. Efficiently sized to easily move through standard doorways. Can be moved by forklift or crane, providing you multiple storage and transport options. Handles one to six cylinders with diameters of 3" to 10". Optional Accessory Strap can be added to bottom for extra security. The Caster Frame gives the 6–Pack Cylinder Rack mobility to go anywhere! Meets OSHA 29 CFR.1910 regulations. 6–Pack Ramp Optional ramp attaches to the 6–Pack Cylinder Rack for easy maneuvering of cylinders. Folds up to minimize space.⚠ WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.SPECIFICATIONS89 lbs.1 frame

Manufacturer: Little Giant, Manufacturer Part Number: TW-42-10PSingle cylinder cart features 1.05" O.D. tubing for strength. Noseplate is full 8" deep x 14" wide. Support chain is securely welded to frame to hold cylinder. Comes with a dual handle and 10" x 3.5" Pneumatic wheels. Overall height 47".

Manufacturer: Little Giant, Manufacturer Part Number: TW-42-10Single cylinder cart features 1.05" O.D. tubing for strength. Noseplate is full 8" deep x 14" wide. Support chain is securely welded to frame to hold cylinder. Comes with a dual handle and 10" x 2.75" Semi–Pneumatic wheels. Overall height 47".

Manufacturer: Little Giant, Manufacturer Part Number: TW-40-10PSingle cylinder cart features 1.05" O.D. tubing for strength. Noseplate is full 8" deep x 14" wide. Support chain is securely welded to frame to hold cylinder. Comes with a continuous handle and 10" x 3.5" Pneumatic wheels. Overall height 47".

Manufacturer: Little Giant, Manufacturer Part Number: TW-70-8SR-3RTilt–back truck stabilizes the load on 4 wheels for less effort when transporting cylinders. Safety chains secure cylinder to truck. Comes with 8" x 2.5" Solid Cushion Rubber Wheels and 3" x 1.25" Rubber Casters. 800 lbs. capacity.

Manufacturer: Little Giant, Manufacturer Part Number: TW-40-10Single cylinder cart features 1.05" O.D. tubing for strength. Noseplate is full 8" deep x 14" wide. Support chain is securely welded to frame to hold cylinder. Comes with a continuous handle and 10" x 2.75" Semi–Pneumatic wheels. Overall height 47".