Aerosol Can Disposal

Manufacturer: Vestil, Manufacturer Part Number: CAN-RECYDrum Bung Diameter (in.): 2, Drum Size (gallon): 30 or 55, Maximum Can Height (in.): 14–5/8, Maximum Can Diameter (in.): 3, Carbon Filter: Two Piece – Turn aerosol cans into scrap metal, using the Aerosol Can Puncturing System, exempting them from disposal regulations for hazardous waste. This aerosol can puncturing device safely punctures aerosol cans to relieve pressure, and then empties any residual contents into your drum. Thread the recycler body into the threaded bung of your drum. Push the lever to puncture the can, and two piece filter with a carbon cartridge drains out odors and harmful emissions. Unit includes puncturing device, safety goggles, carbon filter, and anti–static wire, which prevents static buildup by grounding the drum as required by OSHA.

Manufacturer: Aerosolv, Manufacturer Part Number: 28100 Aerosolv ® 360 Aerosol Can Recycling System Safe, easy way to transform aerosol cans into recyclable steel — minimize waste and reduce disposal costs Enclosed system - dual seal chamber eliminates the potential for content spray back, prevents VOC release and reduces gunk build up High-efficiency combination coalescing carbon filter captures odors, and prevents potentially harmful VOCs from being released into the air - extended filter life reduces change outs to save time and money Alignment cone and two-way pressure controlled, non-sparking vent pin offers the most efficient point of puncture - greatly reduces cleanup and minimizes maintenance Intuitive, ergonomic activation wheel design is easy to use, and with no lever handle extending over the side of the drum, removes the chance for snagged clothing or tipped drums Ideal for high volume applications, the Aerosolv 360 system safely converts spent aerosol cans from solid hazardous waste to a non-hazardous, recyclable material. Threading directly into a standard 2-in (51-mm) bung on a 30- (110-liter) or 55-gallon (200-liter) drum, the housing accommodates a wide variety of the most common sized cans, including domed mini, standard, and jumbo. Sleek design with no protruding lever handle - mechanical activation wheel with rack and pinion gear increases torque making can processing easy and fast. Integrated lock out system prevents unauthorized use and tamper-proof retention plate secures the unit to the drum. Non-sparking puncture pin pierces the can and directs the liquid flow straight into the drum for a quick, controlled evacuation. Special non-stick coating on housing minimizes static transfer to the unit while at the same time reduces clean up. Attach the two-stage high-efficiency combination filter to the 3/4-in (19-mm) bung to capture VOCs from any remaining propellants. Replaceable, proprietary polymer coalescer in filter base captures the residual liquid in the gas before it reaches the activated carbon, helping extend the life of the filter. The top activated carbon filter cartridge features adsorption indicator which reacts to the adsorption of VOCs to indicate when the filter cartridge is ready for replacement. Built-in counter tracks system use for maintenance. System also includes safety goggles and an anti-static ground wire with alligator clip. One 55-gallon (200-liter) drum holds approximately 4,000 spent aerosol cans. Punctured, discharged, cans do not meet the definition of hazardous waste per EPA 40 CFR 261.23(a)(6), and thus can be treated as recyclable scrap metal. EPA compliant. SPECIFICATIONS12 lbs.1 Aerosolv 360 System

Manufacturer: Justrite, Aerosolv, Manufacturer Part Number: 28231SAFE, CONVENIENT AND COMPLIANT! Same benefits of original Aerosolv® Super System including a poly containment sump pan for under drainage drum, padlock w/key, combination coalescing/colormetric carbon filter w/check valve, anti-static ground wire w/C-clamp and safety goggles.. The Aerosolv® 7000 XL Dual-Compliant aerosol can recycling system safely and efficiently disposes of aerosol cans while complying with the California Universal Waste Rule. The Aerosolv 7000XL System includes all the great features of the Aerosolv 7000 Super Aerosol Can Recycling System plus a shut-off valve in the puncturing unit and a check valve in the carbon cartridge to prevent off-gassing. A poly lid cover and a poly containment sump help you stay compliant whether you are accumulating or transporting processed aerosol cans for scrap. The unit also includes an Aerosolv 7163 combination coalescing colormetric carbon filter, a padlock with key, anti-static ground wire with C-clamp, and safety goggles. The Combination Coalescing/Carbon Filter threads into the ¾" bung and is comprised of two parts. The lower Coalescing portion removes airborne liquid while the replaceable, upper Activated Carbon portion adsorbs hydrocarbons and odor. A variety of replacement filters and parts are also available. SPECIFICATIONS25 lbs.1 aerosolv dual compliant system