Vestil – Page 245 – Spill 911 Inc.

Vestil Vestil Manual Scissor Cart - 24" x 36" Platform - 1500 lbs Capacity - Foot Pump Operated - CART-23-15-M $1,952.57

Manufacturer: Vestil, Manufacturer Part Number: CART-23-15-MCapacity: 1,500 lbs., Platform Size: 24W" x 36"L, Service Range: 11" to 32" – Manual Scissor Cart – Tables provide unparalleled ergonomic support in lifting, palletizing, loading, and unloading applications. Carts are raised or lowered with this manual two–step foot pump. Units roll smoothly with 2 rigid and 2 swivel 4"x2" phenolic casters with brakes. Push handle is non–removable. Platform is equipped with perimeter pinch–point guard for OSHA compliance.

Vestil Vestil Manual Swing Reach Lifter Jib - 0 to 42 Inch Reach, 36 Inch Hook Height - 400 lb Capacity - Steel - VAN-J $733.15

Manufacturer: Vestil, Manufacturer Part Number: VAN-JDescription: Manual, Swing Reach (Min x Max): 0" to 42", Max Hook Height: 36", Capacity (Pounds): 400 – Lifter Jib – Lift items from the ground to van oor height, then rotate into cargo area. Hand crank winch is standard, battery powered winch is optional. Battery powered winch includes 36" long leads – battery not included. Van floor to raised hook height is 38". Double–pivot arm for use in tight spaces. Overall height is 47". Mounting plate measures 8" x 8". Steel construction. Painted finish.

Vestil Vestil Mechanical Edge-O-Dock Leveler - 20,000 lb Capacity, 66 Inches Wide - FM-2066 $1,305.17

Manufacturer: Vestil, Manufacturer Part Number: FM-2066The Edge-O-Dock leveler permanently attaches to face of dock. It is recommended for docks to be at least forty-eight (48) inches high. When the trailer departs, the lip drops automatically behind the face of the bumpers. Concrete recess is not required. It comes complete with bumpers and installation instructions. Standard Ramping is twenty-seven (29) inches, with a thirty-six (36-5/8) inch long ramping length available for smaller grade. A steel dock edge, or approach ramp is required for proper installation. The Mechanical Edge-O-Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically.

Vestil Vestil Mechanical Edge-O-Dock Leveler - 78 Inch Wide, 20000 lb Capacity - FM-2078 $1,596.45

Manufacturer: Vestil, Manufacturer Part Number: FM-2078Capacity: 20,000 lbs., Operation: Mechanical, Usable Width: 78" – Edge–O–Docklevelers – Permanently attaches to face of dock. Recommended for docks at least 48" high. Each unit provides a service range of 5" up and 5" down. When the trailer departs the lip drops automatically behind the face of the bumpers. Concrete recess is not required. Complete with 2" x 8" x 18" bumpers and installation instructions. Standard ramping length is 27". A steel dock edge is required for proper installation. The Mechanical Edge–O–Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically.

Vestil Vestil Mechanical Edge-O-Dock Leveler - Permanent Dock Attachment - 20,000 lb Capacity - 72 Inches - FM-2072 $1,406.64

Manufacturer: Vestil, Manufacturer Part Number: FM-2072The Edge-O-Dock leveler permanently attaches to face of dock. It is recommended for docks to be at least forty-eight (48) inches high. When the trailer departs, the lip drops automatically behind the face of the bumpers. Concrete recess is not required. It comes complete with bumpers and installation instructions. Standard Ramping is twenty-seven (29) inches, with a thirty-six (36-5/8) inch long ramping length available for smaller grade. A steel dock edge, or approach ramp is required for proper installation. The Mechanical Edge-O-Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically.

Vestil Vestil Mechanical Edge-O-Dockleveler - 48" Width, 6000 lb Capacity - FM-0648 $1,048.99

Manufacturer: Vestil, Manufacturer Part Number: FM-0648Capacity: 6,000 lbs., Operation: Mechanical, Usable Width: 48" – Edge–O–Docklevelers – Permanently attaches to face of dock. Recommended for docks at least 48" high. Each unit provides a service range of 5" up and 5" down. When the trailer departs the lip drops automatically behind the face of the bumpers. Concrete recess is not required. Complete with 2" x 8" x 18" bumpers and installation instructions. Standard ramping length is 27". A steel dock edge is required for proper installation. The Mechanical Edge–O–Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically.

Vestil Vestil Mechanical Edge-O-Dockleveler - 66" Width, 25000 lb Capacity - Model FM-2566 $1,514.05

Manufacturer: Vestil, Manufacturer Part Number: FM-2566Capacity: 25,000 lbs., Operation: Mechanical, Usable Width: 66" – Edge–O–Docklevelers – Permanently attaches to face of dock. Recommended for docks at least 48" high. Each unit provides a service range of 5" up and 5" down. When the trailer departs the lip drops automatically behind the face of the bumpers. Concrete recess is not required. Complete with 2" x 8" x 18" bumpers and installation instructions. Standard ramping length is 27". A steel dock edge is required for proper installation. The Mechanical Edge–O–Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically.

Vestil Vestil Mechanical Edge-O-Dockleveler - 72 Inch Width, 25000 lb Capacity - Model FM-2572 $1,594.51

Manufacturer: Vestil, Manufacturer Part Number: FM-2572Capacity: 25,000 lbs., Operation: Mechanical, Usable Width: 72" – Edge–O–Docklevelers – Permanently attaches to face of dock. Recommended for docks at least 48" high. Each unit provides a service range of 5" up and 5" down. When the trailer departs the lip drops automatically behind the face of the bumpers. Concrete recess is not required. Complete with 2" x 8" x 18" bumpers and installation instructions. Standard ramping length is 27". A steel dock edge is required for proper installation. The Mechanical Edge–O–Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically.

Vestil Vestil Mechanical Scissor Cart - 660 lb Capacity, 37 x 23.5 in Dimensions - CART-660-M $565.52

Manufacturer: Vestil, Manufacturer Part Number: CART-660-MThe Mechanical Scissor Cart raises and lowers material quickly and easily. The cart rolls smoothly on two rigid and two swivel casters. Mechanical screw drive provides precise positioning with no downward drift. Features an internal safety velocity fuse in each cylinder.

Vestil Vestil Medium Duty Auto-Wrap Stretch Wrap Machine - 60-Inch Film Capacity - SWA-60-AW $17,442.26

The Vestil Medium Duty High Performance Auto-Wrap Stretch Wrap Machine is built for efficient pallet wrapping with a strong 60-inch film capacity. Designed as a medium duty machine stretch wrap, it optimizes industrial processes while prioritizing operator safety and boosting productivity.Key Features An intuitive digital control center for easy adjustment of pallet rotations and programmable film wrapping patterns Four built-in multifunction wrap patterns for a wide range of applications, including a dedicated medium duty machine stretch wrap mode A variable speed powered carousel with soft start/stop to maintain wrapping consistency Photocell sensors that automatically adjust to varying pallet heights for enhanced safety Technical Specifications Manufacturer: Vestil (Vestil Collection) Manufacturer Part Number: SWA-60-AW Wrap Patterns: Four standard multifunction options Sensor Technology: Photocell sensors for detecting pallet height This advanced machine not only accelerates wrapping speed and consistency but also improves overall operational efficiency, making it a valuable investment for demanding industrial settings. Explore more trusted solutions in our Strapping and Stretch Wrap Machines collection.

Vestil Vestil Medium Duty Self Dumping Steel Hopper - 1/2 CuYd Volume, 4000 lb Capacity, 30 in Chute Width - Green - Model D-50-MD-GRN-T $812.23

Manufacturer: Vestil, Manufacturer Part Number: D-50-MD-GRN-TUniform Capacity (pounds): 4,000, Steel (gauge): 10, Volume (cubic yards): 1/2, Fork Pocket Center (in.): 18, Usable Fork Pocket Width (in.): 7–1/2, Usable Fork Pocket Height (in.): 2–1/2, Usable Chute Width (in.): 30, Usable Chute Length (in.): 41–1/4, Usable Chute Height (in.): 27–7/8, Finish: Powder Coat Green – This Medium Duty Self–Dumping Steel Hopper with Bumper Release automatically dumps when bumper release contacts the side of the dumpster. Hopper returns to an upright and locked position automatically after it dumps. Also includes a cable that may be operated from the seat of the fork truck to manually dump the hopper. A safety restraint is provided to secure the hopper to the fork truck. (Length Dimension is measured at top of chute.) Hopper is stackable if you stack the top hopper turned ninety (90) degrees from the bottom.

Vestil Vestil Medium Duty Self-Dumping Hopper - 1.5 Cubic Yards, 4000 lb Capacity, 70-Degree Tilt, Green - D-150-MD-GRN-T $1,154.77

Manufacturer: Vestil, Manufacturer Part Number: D-150-MD-GRN-TUniform Capacity (pounds): 4,000, Steel (gauge): 10, Volume (cubic yards): 1–1/2, Fork Pocket Center (in.): 28, Usable Fork Pocket Width (in.): 7–1/2, Usable Fork Pocket Height (in.): 2–1/2, Usable Chute Width (in.): 40, Usable Chute Length (in.): 63–3/4, Usable Chute Height (in.): 41–1/2, Finish: Powder Coat Green – This Medium Duty Self–Dumping Steel Hopper with Bumper Release automatically dumps when bumper release contacts the side of the dumpster. Hopper returns to an upright and locked position automatically after it dumps. Also includes a cable that may be operated from the seat of the fork truck to manually dump the hopper. A safety restraint is provided to secure the hopper to the fork truck. (Length Dimension is measured at top of chute.)

Vestil Vestil Medium Duty Self-Dumping Hopper - 1/2 CuYd 4000 lb Capacity with Bumper Release - Blue - D-50-MD $812.23

Manufacturer: Vestil, Manufacturer Part Number: D-50-MDUniform Capacity (pounds): 4,000, Steel (gauge): 10, Volume (cubic yards): 1/2, Fork Pocket Center (in.): 18, Usable Fork Pocket Width (in.): 7–1/2, Usable Fork Pocket Height (in.): 2–1/2, Usable Chute Width (in.): 30, Usable Chute Length (in.): 41–1/4, Usable Chute Height (in.): 27–7/8, Finish: Powder Coat Blue – This Medium Duty Self–Dumping Steel Hopper with Bumper Release automatically dumps when bumper release contacts the side of the dumpster. Hopper returns to an upright and locked position automatically after it dumps. Also includes a cable that may be operated from the seat of the fork truck to manually dump the hopper. A safety restraint is provided to secure the hopper to the fork truck. (Length Dimension is measured at top of chute.) Hopper is stackable if you stack the top hopper turned ninety (90) degrees from the bottom.

Vestil Vestil Medium Duty Self-Dumping Hopper - 2.5 Cubic Yard, 4000 lb Capacity, Yellow - D-250-MD-YEL $1,427.37

Manufacturer: Vestil, Manufacturer Part Number: D-250-MD-YELUniform Capacity (pounds): 4,000, Steel (gauge): 10, Volume (cubic yards): 2–1/2, Fork Pocket Center (in.): 28, Usable Fork Pocket Width (in.): 7–1/2, Usable Fork Pocket Height (in.): 2–1/2, Usable Chute Width (in.): 66–1/4, Usable Chute Length (in.): 63–3/4, Usable Chute Height (in.): 41–1/2, Finish: Powder Coat Yellow – This Medium Duty Self–Dumping Steel Hopper with Bumper Release automatically dumps when bumper release contacts the side of the dumpster. Hopper returns to an upright and locked position automatically after it dumps. Also includes a cable that may be operated from the seat of the fork truck to manually dump the hopper. A safety restraint is provided to secure the hopper to the fork truck. (Length Dimension is measured at top of chute.)

Vestil Vestil Medium Duty Self-Dumping Hopper - 3/4 CuYd, 4000 lb Capacity, Powder Coat Yellow - D-75-MD-YEL $961.97

Manufacturer: Vestil, Manufacturer Part Number: D-75-MD-YELUniform Capacity (pounds): 4,000, Steel (gauge): 10, Volume (cubic yards): 3/4, Fork Pocket Center (in.): 18, Usable Fork Pocket Width (in.): 7–1/2, Usable Fork Pocket Height (in.): 2–1/2, Usable Chute Width (in.): 28–1/4, Usable Chute Length (in.): 54–1/2, Usable Chute Height (in.): 32–1/2, Finish: Powder Coat Yellow – This Medium Duty Self–Dumping Steel Hopper with Bumper Release automatically dumps when bumper release contacts the side of the dumpster. Hopper returns to an upright and locked position automatically after it dumps. Also includes a cable that may be operated from the seat of the fork truck to manually dump the hopper. A safety restraint is provided to secure the hopper to the fork truck. (Length Dimension is measured at top of chute.) Hopper is stackable if you stack the top hopper turned ninety (90) degrees from the bottom.

Vestil Vestil Medium Duty Self-Dumping Hopper, 3/4 Cubic Yard, 4000 lb Capacity, Orange - Model D-75-MD-ORG-C $961.97

Manufacturer: Vestil, Manufacturer Part Number: D-75-MD-ORG-CUniform Capacity (pounds): 4,000, Steel (gauge): 10, Volume (cubic yards): 3/4, Fork Pocket Center (in.): 18, Usable Fork Pocket Width (in.): 7–1/2, Usable Fork Pocket Height (in.): 2–1/2, Usable Chute Width (in.): 28–1/4, Usable Chute Length (in.): 54–1/2, Usable Chute Height (in.): 32–1/2, Finish: Powder Coat Orange – This Medium Duty Self–Dumping Steel Hopper with Bumper Release automatically dumps when bumper release contacts the side of the dumpster. Hopper returns to an upright and locked position automatically after it dumps. Also includes a cable that may be operated from the seat of the fork truck to manually dump the hopper. A safety restraint is provided to secure the hopper to the fork truck. (Length Dimension is measured at top of chute.) Hopper is stackable if you stack the top hopper turned ninety (90) degrees from the bottom.

Vestil Vestil Medium Duty Self-Dumping Steel Hopper - 0.50 Cubic Yard, 4000 lb Capacity - D-50-MD-BLK-SG $812.23

Manufacturer: Vestil, Manufacturer Part Number: D-50-MD-BLK-SGThis Medium Duty Self-Dumping Steel Hopper with Bumper Release automatically dumps when bumper release contacts the front of the dumpster. Hopper returns to an upright and locked position automatically after it dumps. Also includes a cable that may be operated from the seat of the fork truck to manually dump the hopper. The included safety restraint should be properly secured to a fork truck before dumping. (Length Dimension is measured at top of chute.) Hopper is stackable if you stack the top hopper turned ninety (90) degrees from the bottom. MFG Part# D-50-MD-BLK-HG

Vestil Vestil Medium Duty Self-Dumping Steel Hopper - 0.75 Cubic Yard - 4000 lb Capacity - D-75-MD-SL $961.97

Manufacturer: Vestil, Manufacturer Part Number: D-75-MD-SLThis Medium Duty Self-Dumping Steel Hopper with Bumper Release automatically dumps when bumper release contacts the front of the dumpster. Hopper returns to an upright and locked position automatically after it dumps. Also includes a cable that may be operated from the seat of the fork truck to manually dump the hopper. The included safety restraint should be properly secured to a fork truck before dumping. (Length Dimension is measured at top of chute.) Hopper is stackable if you stack the top hopper turned ninety (90) degrees from the bottom. MFG Part# D-75-MD-SL

Vestil Vestil Medium Duty Self-Dumping Steel Hopper - 0.75 Cubic Yard, 4000 lb Capacity, Hunter Green - D-75-MD-GRN-H $961.97

Manufacturer: Vestil, Manufacturer Part Number: D-75-MD-GRN-HThis Medium Duty Self-Dumping Steel Hopper with Bumper Release automatically dumps when bumper release contacts the front of the dumpster. Hopper returns to an upright and locked position automatically after it dumps. Also includes a cable that may be operated from the seat of the fork truck to manually dump the hopper. The included safety restraint should be properly secured to a fork truck before dumping. (Length Dimension is measured at top of chute.) Hopper is stackable if you stack the top hopper turned ninety (90) degrees from the bottom. MFG Part# D-75-MD-GRN-H

Vestil Vestil Medium Duty Self-Dumping Steel Hopper - 1 Cubic Yard - 4000 lb Capacity - Blue - D-100-MD $996.24

Manufacturer: Vestil, Manufacturer Part Number: D-100-MDThis Medium Duty Self-Dumping Steel Hopper with Bumper Release automatically dumps when bumper release contacts the front of the dumpster. Hopper returns to an upright and locked position automatically after it dumps. Also includes a cable that may be operated from the seat of the fork truck to manually dump the hopper. The included safety restraint should be properly secured to a fork truck before dumping. (Length Dimension is measured at top of chute.)

Vestil Vestil Medium Duty Self-Dumping Steel Hopper - 1 Cubic Yard - Low Profile 90° - Hunter Green $1,024.40

This Medium Duty Low Profile 90° Self-Dumping Steel Hopper in Hunter Green is designed to make loading and dumping operations easier while enhancing safety on job sites. Its streamlined design enables fast operation with a forklift, ensuring material handling is both efficient and secure.Key Features• Full 90° dumping angle with a cushioned rubber bumper stop• Low-profile design for easy loading and quick forklift operation• Integrated safety restraint and secure cable pull mechanism• Heavy-duty latch that protects workers during dumpingSpecifications• Material: Durable steel construction• Design: Low profile for convenient loading; engineered for a complete 90° dump• Dump Mechanism: Operated by a cable pull from the forklift seat with an automatic return to a secure, upright position• Stackability: Compatible with H-25/H-50 and H-100/H-150 models (Note: Do not stack more than three units; only stack when unloaded and empty)For industries requiring efficient material handling and reliable safety features, this hopper provides a robust solution that minimizes downtime. Always secure the safety restraint before use to ensure safe and optimal operation. For more industrial material handling solutions, visit our Hoppers collection and explore additional options in our Material Handling collection.

Vestil Vestil Medium Duty Self-Dumping Steel Hopper - 1 Cubic Yard, 4000 lb Capacity, 70 Degree Dump - Green - D-100-MD-GRN-T $996.24

Manufacturer: Vestil, Manufacturer Part Number: D-100-MD-GRN-TUniform Capacity (pounds): 4000, Steel (gauge): 10, Volume (cubic yards): 1, Fork Pocket Center (in.): 18, Usable Fork Pocket Width (in.): 7–1/2, Usable Fork Pocket Height (in.): 2–1/2, Usable Chute Width (in.): 38, Usable Chute Length (in.): 54–1/4, Usable Chute Height (in.): 32–1/2, Finish: Powder Coat Green – This Medium Duty Self–Dumping Steel Hopper with Bumper Release automatically dumps when bumper release contacts the side of the dumpster. Hopper returns to an upright and locked position automatically after it dumps. Also includes a cable that may be operated from the seat of the fork truck to manually dump the hopper. A safety restraint is provided to secure the hopper to the fork truck. (Length Dimension is measured at top of chute.) Hopper is stackable if you stack the top hopper turned ninety (90) degrees from the bottom.

Vestil Vestil Medium Duty Self-Dumping Steel Hopper - 1 CuYd, 4000 lb Capacity, Powder Coat Orange - D-100-MD-ORG-C $996.24

Manufacturer: Vestil, Manufacturer Part Number: D-100-MD-ORG-CUniform Capacity (pounds): 4000, Steel (gauge): 10, Volume (cubic yards): 1, Fork Pocket Center (in.): 18, Usable Fork Pocket Width (in.): 7–1/2, Usable Fork Pocket Height (in.): 2–1/2, Usable Chute Width (in.): 38, Usable Chute Length (in.): 54–1/4, Usable Chute Height (in.): 32–1/2, Finish: Powder Coat Orange – This Medium Duty Self–Dumping Steel Hopper with Bumper Release automatically dumps when bumper release contacts the side of the dumpster. Hopper returns to an upright and locked position automatically after it dumps. Also includes a cable that may be operated from the seat of the fork truck to manually dump the hopper. A safety restraint is provided to secure the hopper to the fork truck. (Length Dimension is measured at top of chute.) Hopper is stackable if you stack the top hopper turned ninety (90) degrees from the bottom.

Vestil Vestil Medium Duty Self-Dumping Steel Hopper - 1 CuYd, 70-Degree, 4000 lb Capacity, Bumper Release - D-100-MD-GY-SG $996.24

Manufacturer: Vestil, Manufacturer Part Number: D-100-MD-GY-SGUniform Capacity (pounds): 4000, Steel (gauge): 10, Volume (cubic yards): 1, Fork Pocket Center (in.): 18, Usable Fork Pocket Width (in.): 7–1/2, Usable Fork Pocket Height (in.): 2–1/2, Usable Chute Width (in.): 38, Usable Chute Length (in.): 54–1/4, Usable Chute Height (in.): 32–1/2, Finish: Powder Coat Grey – This Medium Duty Self–Dumping Steel Hopper with Bumper Release automatically dumps when bumper release contacts the side of the dumpster. Hopper returns to an upright and locked position automatically after it dumps. Also includes a cable that may be operated from the seat of the fork truck to manually dump the hopper. A safety restraint is provided to secure the hopper to the fork truck. (Length Dimension is measured at top of chute.) Hopper is stackable if you stack the top hopper turned ninety (90) degrees from the bottom.

Find anything you need