60
UltraTech 60" x 60" High-Capacity DrainGuard, Oil $39.36
Manufacturer: UltraTech, Manufacturer Part Number: 939360"x60" High–Capacity DrainGuard, Oil and Sediment Model: High Capacity Catch Basin Insert Captures Large Amounts Of Sediment And Oil. Catch basin insert is quickly and easily installed – uses grating and retainer bars (must be purchased separately) to secure in place. Heavy–duty, needle–punched geotextile material absorbs oil, grease and other hydrocarbons – captures up to 300 lbs. of sediment, dirt and debris. Large, 3" wide, polyester handling straps help in removal of full units. The use of backhoes, forklifts or other equipment is recommended for removal of units with large amounts of silt, dirt and sediment. 60" x 60" skirt fits almost any drain (up to 54" x 54"). Excess material can be trimmed if desired. Helps comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in StormWater Pollution Prevention Plans. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.
Drain Guard, Recycled Model: 1-Pack
UltraTech Drain Guard, Recycled Model: 1-Pack $65.56
Manufacturer: UltraTech, Manufacturer Part Number: 9378 Drain Guard, Recycled Model: 1–Pack: Keep Oil and Sediment From Entering Catch Basins With Environmentally Friendly Inserts. Made completely out of Ultra-Filter-Tex material – 100% recycled content. Superior water flow rate (151 gal/ft.2), together with built–in overflow ports prevents ponding and flooding. Ultra-Filter-Tex material captures silt and sediment from runoff in addition to absorbing hydrocarbons. Quick and easy installation – simply lift catch basin grate, lower Drain Guard in place, and replace the grate. Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDL requirements. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.
Drain Guard, Ultimate Model: 1-Pack
UltraTech Drain Guard, Ultimate Model: 1-Pack $54.86
Manufacturer: UltraTech, Manufacturer Part Number: 9376 The Ultimate In Catch Basin Inserts Removes Dirt, Sediment, Hydrocarbons, And Utilizes An Effective Antimicrobial Coating Same hydrocarbon and sediment removal capabilities as the Ultra–Drain Guard, Oil & Sediment Plus Model but with additional antimicrobial properties.1.5" x 20" strips of Ultra-Filter-Tex AM (Antimicrobial) hang from the bottom of the Drain Guard and become immersed in standing catch basin water, allowing contact with destructive bacteria. Antimicrobial coated Ultra-Filter-Tex "tentacles" help address stormwater related issues with single–cell organisms (bacteria, fungi, yeast, and algae) that are found in stagnant stormwater and catch basins. Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDL requirements.
Drain Guard: Heavy Metal Removal Model
UltraTech Drain Guard: Heavy Metal Removal Model $175.68
Manufacturer: UltraTech, Manufacturer Part Number: 9397Drain Guard: Heavy Metal Removal Model, 48" x 36", 1–Pack: Remove Heavy Metal Runoff Water At The Storm Drain. Specialized catch basin insert has "quilted" sections sewn into the body of the unit where stormwater flows through. A custom blend of heavy metal removal media is contained in each section of the pouch. A non–permeable, PVC skirt at the top of the unit funnels all water to the lower portion of the Ultra–Drain Guard where it is forced to move through the media before it can move on into the storm drain. Removes hydrocarbons, heavy metals, sediments and other organics from stormwater and industrial runoff. Helps comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in Storm Water Pollution Prevention Plans. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.
Drain Guard: Trash and Debris, 10-Pack
UltraTech Drain Guard: Trash and Debris, 10-Pack $257.67
Manufacturer: UltraTech, Manufacturer Part Number: 9229Drain Guard: Trash and Debris, 10–Pack: Keep Sediment And Other Pollutants From Entering The Water System With Ultra–DrainGuard Catch Basin Inserts. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.
Drain Markers
UltraTech Drain Markers $143.82
Manufacturer: UltraTech, Manufacturer Part Number: 9208 Helps inform and educate the public that most storm drains go directly into waterways untreated Installs quickly and easily using permanent adhesive – cleaner and more environmentally friendly than paint and stencils Designed for long life – heavy–duty plastic construction is scratch–resistant and will not rust or corrode Includes 25 Markers and adhesive Helps comply with NPDES, 40 CFR 122.26 (1999) SPECIFICATIONS30 lbs.25 markers and adhesive
Grate Lifter
UltraTech Grate Lifter $605.47
Manufacturer: UltraTech, Manufacturer Part Number: 9234 Ergonomically designed – minimizes potential injuries associated with heavy lifting Allows single–person grate lifting – reduces personnel and maintenance costs Disassembles quickly for easy transport SPECIFICATIONS82 lbs.1 lifter
Grate Lifter, Carrying Case-2 piece set
UltraTech Grate Lifter, Carrying Case-2 piece set $195.21
Manufacturer: UltraTech, Manufacturer Part Number: 9241Optional Carrying case for the Ultra–Grate Lifter.
Grate Lifting Hook
UltraTech Grate Lifting Hook $43.43
Manufacturer: UltraTech, Manufacturer Part Number: 9235Grate Lifting Hook aids in lifting, removing and replacing grates. Grate lifter makes installing the DrainGuard effortless!SPECIFICATIONS7 lbs.1 hook
StormNest Catch Basin Insert - Sediment, Rectangle XL Adjustable 25
Eagle StormNest Catch Basin Insert - Sediment, Rectangle XL Adjustab... $97.43
Manufacturer: Eagle, Manufacturer Part Number: T8702XLStormNest Catch Basin Insert – Sediment, Rectangle XL Adjustable 25" – 42"SPECIFICATIONS500 gpm Flow Rate - 3 lbs.
StormNest Catch Basin Insert - Sediment-Oils, Rectangle Adjustable 16
Eagle StormNest Catch Basin Insert - Sediment-Oils, Rectangle Adjust... $82.46
Manufacturer: Eagle, Manufacturer Part Number: T8702BStormNest Catch Basin Insert – Sediment–Oils, Rectangle Adjustable 16" X 20", 28" X 36"SPECIFICATIONS500 gpm Flow Rate - 2 lbs.
StormNest Catch Basin Insert - Sediment-Oils, Rectangle XL 25
Eagle StormNest Catch Basin Insert - Sediment-Oils, Rectangle XL 25"... $115.69
Manufacturer: Eagle, Manufacturer Part Number: T8702XLBStormNest Catch Basin Insert SedimentOils, Rectangle XL 25" 42"SPECIFICATIONS500 gpm Flow Rate - 3 lbs.
StormNest Catch Basin Insert - Sediment-Oils, Round 24
Eagle StormNest Catch Basin Insert - Sediment-Oils, Round 24" - 26" $85.04
Manufacturer: Eagle, Manufacturer Part Number: T8701BStormNest Catch Basin Insert – Sediment–Oils, Round 24" – 26"SPECIFICATIONS500 gpm Flow Rate - 2 lbs.
StormNest Catch Basin Insert -Sediment, Round Adjustable 24
Eagle StormNest Catch Basin Insert -Sediment, Round Adjustable 24" -... $64.16
Manufacturer: Eagle, Manufacturer Part Number: T8701StormNest Catch Basin Insert –Sediment, Round Adjustable 24" – 26"SPECIFICATIONS500 gpm Flow Rate - 2 lbs.
StormNest Drain Dam (2/Pkg)
Eagle StormNest Drain Dam (2/Pkg) $39.26
Manufacturer: Eagle, Manufacturer Part Number: T8711StormNest Drain Dam (2/Pkg)SPECIFICATIONS500 gpm Flow Rate - 6 lbs.
Ultra-DrainGuard Curb-Style Reusable Model 24
UltraTech Ultra-Drain Guard Curb-Style Reusable Model 24" x 24" $56.20
Manufacturer: UltraTech, Manufacturer Part Number: 9332 Stop Sediment in Stormwater Runoff From Entering Combination Drains.   For use with combination drains with a street grate and curb opening. Large accumulation pocket collects up to 500 lbs. of silt, dirt, sediment and soil. Built–in barrier blocks stormwater from entering curb–inlet, forcing water to flow into street grate. Curb inlet barrier's 2 1/2" height allows overflow in heavy rainfall events. Can handle a Flow Rate of 200 Gal/Min/Ft Helps comply with NPDES, 40 CFR 122.26 (1999). SPECIFICATIONS2 lbs.1 reusable drain guard curb-style24" L x 24" W
Ultra-DrainGuard Curb-Style Reusable Model 24
UltraTech Ultra-Drain Guard Curb-Style Reusable Model 24" x 36" $58.20
Manufacturer: UltraTech, Manufacturer Part Number: 9330Stop Sediment in Stormwater Runoff From Entering Combination Drains.   For use with combination drains with a street grate and curb opening. Large accumulation pocket collects up to 500 lbs. of silt, dirt, sediment and soil. Built–in barrier blocks stormwater from entering curb–inlet, forcing water to flow into street grate. Curb inlet barrier's 2 1/2" height allows overflow in heavy rainfall events. Can handle a Flow Rate of 200 Gal/Min/Ft² Helps comply with NPDES, 40 CFR 122.26 (1999). SPECIFICATIONS2.5 lbs.1 reusable drain guard curb-style24" L x 36" W
Ultra-Drain Guard Reusable Model 24 Ultra-Drain Guard Reusable Model 24
UltraTech Ultra-Drain Guard Reusable Model 24" x 24" x 36" $44.11
Manufacturer: UltraTech, Manufacturer Part Number: 9341 Capture dirt and sediment at construction sites and other “high erosion” areas Storm drains on or around construction sites are susceptible to large quantities of dirt and sand. In those circumstances, a higher capacity catch basin insert may be the better solution.   While it won’t capture hydrocarbons like many of the other Ultra-Drain Guards, the reusable model is capable of containing up to five hundred (500) pounds of silt, soil, and dirt. Product Highlights Rugged polypropylene construction can be easily rinsed and reused. Deep accumulation pocket (36") can hold up to 500 lbs. of soil, sand, sediment, and dirt. Designed for easy removal with backhoe, forklift, or other equipment. Custom sizes available. Material: High Flow Woven SPECIFICATIONS1 lb.1 reusable drain guard24" L x 24" W x 36" H
Ultra-Drain Guard Reusable Model 24 Ultra-Drain Guard Reusable Model 24
UltraTech Ultra-Drain Guard Reusable Model 24" x 36" x 36" $44.79
Manufacturer: UltraTech, Manufacturer Part Number: 9340 Capture dirt and sediment at construction sites and other “high erosion” areas Storm drains on or around construction sites are susceptible to large quantities of dirt and sand. In those circumstances, a higher capacity catch basin insert may be the better solution.   While it won’t capture hydrocarbons like many of the other Ultra-Drain Guards, the reusable model is capable of containing up to five hundred (500) pounds of silt, soil, and dirt. Product Highlights Rugged polypropylene construction can be easily rinsed and reused. Deep accumulation pocket (36") can hold up to 500 lbs. of soil, sand, sediment, and dirt. Designed for easy removal with backhoe, forklift, or other equipment. Custom sizes available. Material: High Flow Woven SPECIFICATIONS1 lb.1 reusable drain guard24" L x 36" W x 36" H
Ultra-Drain Guard Reusable Model 24 Ultra-Drain Guard Reusable Model 24
UltraTech Ultra-Drain Guard Reusable Model 24" x 48" x 36" $46.14
Manufacturer: UltraTech, Manufacturer Part Number: 9342 Capture dirt and sediment at construction sites and other “high erosion” areas Storm drains on or around construction sites are susceptible to large quantities of dirt and sand. In those circumstances, a higher capacity catch basin insert may be the better solution.   While it won’t capture hydrocarbons like many of the other Ultra-Drain Guards, the reusable model is capable of containing up to five hundred (500) pounds of silt, soil, and dirt. Product Highlights Rugged polypropylene construction can be easily rinsed and reused. Deep accumulation pocket (36") can hold up to 500 lbs. of soil, sand, sediment, and dirt. Designed for easy removal with backhoe, forklift, or other equipment. Custom sizes available. Material: High Flow Woven SPECIFICATIONS1 lb.1 reusable drain guard24" L x 48" W x 36" H
Ultra-DrainGuard Microbe Boom Model
UltraTech Ultra-DrainGuard Microbe Boom Model $84.30
Manufacturer: UltraTech, Manufacturer Part Number: 9800Capture Pollutants Above The Drain, Clean And Bioremediate Below The DrainDual component product includes Drain Guard to capture pollutants entering drain and a Microbe Mini–Boom to clean up the inside of the catch basin.The Ultra–Drain Guard catch basin insert captures dirt, sediment, oil, grease and other pollutants and stops them from entering the water system.The Ultra–Microbe Mini Boom includes a 4’ tether and is tied to a grommet in the bottom of the Drain Guard. The Boom floats on the water and oil eating Microbes are released to consume any hydrocarbons present. (Click here for more information on Ultra–Microbes)Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDL requirements.
Ultra-DrainGuard Retainers, for catch basins from 22
UltraTech Ultra-DrainGuard Retainers, for catch basins from 22" - 36" $50.89
Manufacturer: UltraTech, Manufacturer Part Number: 9237 Keep DrainGuards In Place Without The Use Of Grates Heavy–Duty coated steel retainers mount on inside ledge of catch basin – securing DrainGuard when grating is removed or installed. Two sizes of telescoping retainers adjust to fit any size storm drain. For use with all DrainGuards.SPECIFICATIONS4 lbsSet of two
Ultra-DrainGuard Retainers, for catch basins from 36
UltraTech Ultra-DrainGuard Retainers, for catch basins from 36" - 62" $66.23
Manufacturer: UltraTech, Manufacturer Part Number: 9238 Keep DrainGuards In Place Without The Use Of Grates Heavy–Duty coated steel retainers mount on inside ledge of catch basin – securing DrainGuard when grating is removed or installed. Two sizes of telescoping retainers adjust to fit any size storm drain. For use with all DrainGuards.SPECIFICATIONS6 lbsSet of two
Ultra-Oil & Sediment DrainGuard, 10-Pack
UltraTech Ultra-Oil & Sediment DrainGuard, 10-Pack $227.74
Manufacturer: UltraTech, Manufacturer Part Number: 9218Drain Guard: Oil and Sediment, 10–Pack: Keep Sediment And Other Pollutants From Entering The Water System With Ultra–DrainGuard Catch Basin Inserts. Oil & Sediment Model (Part# 9217/9218/ 9356) – removes hydrocarbons, dirt, sand and other contaminants. Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDL requirements. 16 x 6 x 6. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.
Ultra-Oil & Sediment DrainGuard, 48
UltraTech Ultra-Oil & Sediment DrainGuard, 48" x 36" x 18" $24.43
Manufacturer: UltraTech, Manufacturer Part Number: 9217KEEP SEDIMENT AND OTHER POLLUTANTS FROM ENTERING THE WATER SYSTEM. Available in Three Models: Oil & Sediment Model – removes hydrocarbons as well as dirt, sand and other contaminants. Oil & Sediment Plus Model – provides the same hydrocarbon and sediment removal as the Oil & Sediment Model plus additional Ultra–Filter–Tex filter strips add .51 gallons of oil and grease absorption. Trash & Debris Model – designed specifically to catch larger items and floatables like leaves, cigarette butts and paper goods. Note: The PopUp Capacity Indicator is not designed for use with the Trash & Debris Model. Custom sizes available upon request. Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDL requirements Designed for practical use in Industrial & Retail Facilities, Construction Sites, Parking Lots and Municipalities SPECIFICATIONS1 lb.1 drain guard48" L x 36" W x 18" H, Removes up to .87 gallons of oil and up to 40 lbs. of sediment
Ultra-Oil & Sediment DrainGuard, 60
UltraTech Ultra-Oil & Sediment DrainGuard, 60" x 60" x 18" $29.86
Manufacturer: UltraTech, Manufacturer Part Number: 9356KEEP SEDIMENT AND OTHER POLLUTANTS FROM ENTERING THE WATER SYSTEM. Available in Three Models: Oil & Sediment Model – removes hydrocarbons as well as dirt, sand and other contaminants. Oil & Sediment Plus Model – provides the same hydrocarbon and sediment removal as the Oil & Sediment Model plus additional Ultra–Filter–Tex filter strips add .51 gallons of oil and grease absorption. Trash & Debris Model – designed specifically to catch larger items and floatables like leaves, cigarette butts and paper goods. Note: The PopUp Capacity Indicator is not designed for use with the Trash & Debris Model. Custom sizes available upon request. Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDL requirements Designed for practical use in Industrial & Retail Facilities, Construction Sites, Parking Lots and Municipalities SPECIFICATIONS2 lbs.1 drain guard60" L x 60" W x 18" H, Removes up to 1.55 gallons of oil and up to 40 lbs. of sediment
Ultra-Oil & Sediment DrainGuard, Curb-Insert Style, For Curb Inlets from 24
UltraTech Ultra-Oil & Sediment DrainGuard, Curb-Insert Style, For Curb I... $90.99
Manufacturer: UltraTech, Manufacturer Part Number: 9230Stop Silt, Sediment And Other Debris From Entering Curb Inlets And Catch Basins. For use with combination catch basins with a street grate and curb opening Heavy–duty tension rod secures the DrainGuard inside the curb inlet – stopping sediment and other contaminants from entering the curb portion of the storm drain Fits grate sizes up to 40" x 40" and curb inlets up to 42" wide Oil & Sediment Plus Model has additional Ultra–Filter–Tex filter strips that increase the oil and grease absorption capacity Helps comply with NPDES, 40 CFR 122.26 (1999) SPECIFICATIONS3 lbs.1 drain guardFor curb inlets from 24" - 42"
Ultra-Oil & Sediment DrainGuard, Curb-Insert Style, For Curb Inlets from 42
UltraTech Ultra-Oil & Sediment DrainGuard, Curb-Insert Style, For Curb I... $108.19
Manufacturer: UltraTech, Manufacturer Part Number: 9231Stop Silt, Sediment And Other Debris From Entering Curb Inlets And Catch Basins. For use with combination catch basins with a street grate and curb opening Heavy–duty tension rod secures the DrainGuard inside the curb inlet – stopping sediment and other contaminants from entering the curb portion of the storm drain Fits grate sizes up to 40" x 40" and curb inlets up to 60" wide Oil & Sediment Plus Model has additional Ultra–Filter–Tex filter strips that increase the oil and grease absorption capacity Helps comply with NPDES, 40 CFR 122.26 (1999) SPECIFICATIONS4 lbs.1 drain guardFor curb inlets from 42" - 60"
Ultra-Oil & Sediment Plus DrainGuard, 10-Pack - 36
UltraTech Ultra-Oil & Sediment Plus DrainGuard, 10-Pack - 36" x 48" $353.04
Manufacturer: UltraTech, Manufacturer Part Number: 9220 Drain Guard: Oil and Sediment Plus, 10–Pack: Keep Sediment And Other Pollutants From Entering The Water System With Ultra–DrainGuard Catch Basin Inserts. Oil & Sediment Plus Model (Part# 9219/9220/9358) – the addition of Ultra-Filter-Tex filter strips increases oil and grease absorption. Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDL requirements. 36" X 48". A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.
Ultra-Oil & Sediment Plus DrainGuard, 48
UltraTech Ultra-Oil & Sediment Plus DrainGuard, 48" x 36" x 18" $40.71
Manufacturer: UltraTech, Manufacturer Part Number: 9219KEEP SEDIMENT AND OTHER POLLUTANTS FROM ENTERING THE WATER SYSTEM. Available in Three Models: Oil & Sediment Model – removes hydrocarbons as well as dirt, sand and other contaminants. Oil & Sediment Plus Model – provides the same hydrocarbon and sediment removal as the Oil & Sediment Model plus additional Ultra–Filter–Tex filter strips add .51 gallons of oil and grease absorption. Trash & Debris Model – designed specifically to catch larger items and floatables like leaves, cigarette butts and paper goods. Note: The PopUp Capacity Indicator is not designed for use with the Trash & Debris Model. Custom sizes available upon request. Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDL requirements Designed for practical use in Industrial & Retail Facilities, Construction Sites, Parking Lots and Municipalities SPECIFICATIONS2 lbs.1 drain guard48" L x 36" W x 18" H, Removes up to 1.38 gallons of oil and up to 40 lbs. of sediment
Ultra-Oil & Sediment Plus DrainGuard, 60
UltraTech Ultra-Oil & Sediment Plus DrainGuard, 60" x 60" x 18" $46.14
Manufacturer: UltraTech, Manufacturer Part Number: 9358KEEP SEDIMENT AND OTHER POLLUTANTS FROM ENTERING THE WATER SYSTEM. Available in Three Models: Oil & Sediment Model – removes hydrocarbons as well as dirt, sand and other contaminants. Oil & Sediment Plus Model – provides the same hydrocarbon and sediment removal as the Oil & Sediment Model plus additional Ultra–Filter–Tex filter strips add .51 gallons of oil and grease absorption. Trash & Debris Model – designed specifically to catch larger items and floatables like leaves, cigarette butts and paper goods. Note: The PopUp Capacity Indicator is not designed for use with the Trash & Debris Model. Custom sizes available upon request. Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDL requirements Designed for practical use in Industrial & Retail Facilities, Construction Sites, Parking Lots and Municipalities SPECIFICATIONS3 lbs.1 drain guard60" L x 60" W x 18" H, Removes up to 2.06 gallons of oil and up to 40 lbs. of sediment
Ultra-Oil & Sediment Plus DrainGuard, Curb-Insert Style, For Curb Inlets from 42
UltraTech Ultra-Oil & Sediment Plus DrainGuard, Curb-Insert Style, For C... $112.15
Manufacturer: UltraTech, Manufacturer Part Number: 9240Stop Silt, Sediment And Other Debris From Entering Curb Inlets And Catch Basins. For use with combination catch basins with a street grate and curb opening Heavy–duty tension rod secures the DrainGuard inside the curb inlet – stopping sediment and other contaminants from entering the curb portion of the storm drain Fits grate sizes up to 40” x 40” and curb inlets up to 60” wide Oil & Sediment Plus Model has additional Ultra–Filter–Tex filter strips that increase the oil and grease absorption capacity Helps comply with NPDES, 40 CFR 122.26 (1999) SPECIFICATIONS5 lbs.1 drain guardFor curb inlets from 42" - 60"
Ultra-Trash & Debris DrainGuard, 48
UltraTech Ultra-Trash & Debris DrainGuard, 48" x 36" x 18" $27.14
Manufacturer: UltraTech, Manufacturer Part Number: 9227KEEP SEDIMENT AND OTHER POLLUTANTS FROM ENTERING THE WATER SYSTEM. Available in Three Models: Oil & Sediment Model – removes hydrocarbons as well as dirt, sand and other contaminants. Oil & Sediment Plus Model – provides the same hydrocarbon and sediment removal as the Oil & Sediment Model plus additional Ultra–Filter–Tex filter strips add .51 gallons of oil and grease absorption. Trash & Debris Model – designed specifically to catch larger items and floatables like leaves, cigarette butts and paper goods. Note: The PopUp Capacity Indicator is not designed for use with the Trash & Debris Model. Custom sizes available upon request. Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDL requirements Designed for practical use in Industrial & Retail Facilities, Construction Sites, Parking Lots and Municipalities SPECIFICATIONS1 lb.1 drain guard48" L x 36" W x 18" H, Holds up to 1 cu. ft. before reaching bypass ports
American Express Apple Pay Diners Club Discover Meta Pay Google Pay Mastercard PayPal Shop Pay Venmo Visa