Ramps and Dock Plates

Manufacturer: Vestil, Manufacturer Part Number: FAL-3616-50Overall Width: 36", Overall Length: 16', Capacity: 5,000 lbs., Maximum Working Height: 50" – Fiberglass Autoloader Ramp – The Autoloader Ramp can be separated in half to provide two ramps that may be used to load automobiles and other vehicles. Each half is 18" wide and handles 2,500 pounds. To separate simply remove center hinge pins.

Manufacturer: Vestil, Manufacturer Part Number: FAL-3612-50Overall Width: 36", Overall Length: 12', Capacity: 5,000 lbs., Maximum Working Height: 35" – Fiberglass Autoloader Ramp – The Autoloader Ramp can be separated in half to provide two ramps that may be used to load automobiles and other vehicles. Each half is 18" wide and handles 2,500 pounds. To separate simply remove center hinge pins.

Manufacturer: Eagle, Manufacturer Part Number: 1792KITAnchor Kit for Speed Bumps (6 Anchors & Adhesive)

Manufacturer: Wesco, Manufacturer Part Number: 150800Lightweight, portable ramp allows for easy movement up and down curbs. 600 lbs capacity. RAMP: YELLOW–GENERIC CURB. Plastic Construction. Weight Capacity: 600 lbs. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Vestil, Manufacturer Part Number: RK-8The Wooden Ramp Kit allows building wooden ramps using common lumber. Each kit includes two (2) steel end plates and rubber bottom tips. Installation hardware is included. Drilling required for installation. Lumber/boards are not included. MFG Part# RK-8

Manufacturer: Vestil, Manufacturer Part Number: VCC-115-1Optional 115 Volt 1 Phase AC Power change for powered units.

Manufacturer: Vestil, Manufacturer Part Number: SBLSpecial bend location for Aluminum Dockplate. MFG Part# SBL

Manufacturer: Vestil, Manufacturer Part Number: SB-HD-AK-4The Anchor Kits are a great addition to the facility maintenance department. The kit supplies a solution to securing speed bumps to a surface. The unit is designed of a strong construction that is resilient and long lasting throughout the harshest environments. Once the anchoring is in place, the speed bumps are ready for use. The kit is available in both glue down and asphalt anchor style. MFG Part# SB-HD-AK-4

Manufacturer: Vestil, Manufacturer Part Number: VCH-WG46S.S. Wire Guard that is used with model VCH-46C.

Manufacturer: Vestil, Manufacturer Part Number: HDL-STLSteel Dockboard Handle Kit. MFG Part# HDL-STL

Manufacturer: Vestil, Manufacturer Part Number: VCH-WG57S.S.Wire Guard that is used with model VCH-57C.

Manufacturer: Vestil, Manufacturer Part Number: TS-20-6048Capacity: 20,000 lbs., Overall Size: 60"W x 48"L, Height Difference: 7" – Steel Truck Dockboard – Constructed of high strength (55,000 psi) steel for long life. Beveled edges on both ends permit smooth entry and exit. Deck is diamond plated for safe, efficient use. Welded safety curbs for maximum strength. Locking legs minimize ramp movement and are uneven to allow the dockboard to sit canted for easier floor pickup by forklifts. Standard with leverlift for quick portability with fork truck. Optional accessories: lifting chains, span locks, span pins/holes and removable pickup loops. Manufactured in compliance with OSHA.

Manufacturer: Vestil, Manufacturer Part Number: FRK-LVLDesigned to aid the fork lift driver in determining when the forks are level. Unit reduces the risk of damaging or piercing product when removing it from pallet racking. Fasten the steel leveler to the mast of the fork lift. While tilting the forks to the desired angle, the fork leveler will tilt as well, showing that the forks are not currently in a horizontal position. When forks are moved back into a safe level angle, the leveler will be perfectly horizontally.

Manufacturer: Vestil, Manufacturer Part Number: SSLSliding Span Locks for Aluminum Dockboards (BTA only).

Manufacturer: Vestil, Manufacturer Part Number: ALLDockboards Accessories: LeverliftSPECIFICATIONS4" x 4" x 16" - 10 lbs.

Manufacturer: Vestil, Manufacturer Part Number: SEH-7230The Steel Truck Dockplate is constructed of high strength INX-55 (55,000 psi) steel. Safety locking legs prevent slippage between truck and dock. Safety tread plate helps provide positive traction. Beveled edges for smooth entry and exit. Chain pickup comes standard. Designed with an 11° bend located 9in from the beveled edge. The legs are 10in from the beveled edge. Manufactured in compliance with OSHA. When using three wheeled fork trucks, select capacity +20% due to concentrated load center of board. MFG Part# SEH-7230

Manufacturer: Vestil, Manufacturer Part Number: WL-AR8-48Optional Approach Ramp For a 8 (in.) Lowered Height Truck Scissor Dock Lift. Must be anchored to the floor. MFG Part# WL-AR8-48

Manufacturer: Vestil, Manufacturer Part Number: SE-7230The Steel Truck Dockplate is constructed of high strength INX-55 (55,000 psi) steel. Safety locking legs prevent slippage between truck and dock. Safety tread plate helps provide positive traction. Beveled edges for smooth entry and exit. Chain pickup comes standard. Designed with an 11° bend located 9in from the beveled edge. The legs are 10in from the beveled edge. Manufactured in compliance with OSHA. When using three wheeled fork trucks, select capacity +20% due to concentrated load center of board. MFG Part# SE-7230

Manufacturer: Vestil, Manufacturer Part Number: SPO-RUOptional shallow pit option (minimum depth 24in). MFG Part# SPO-RU

Manufacturer: Vestil, Manufacturer Part Number: CAS-RU-800The curb angle set are a wonderful asset when implementing a new dock leveler. The curb angle sets allow the surface to have a smooth transition and an a eye appealing appearance when installing dock leveling equipment. The set comes in multiple pieces for the easy handling and positioning. MFG Part# CAS-RU-600

Manufacturer: Vestil, Manufacturer Part Number: CAS-RU-1000The curb angle set are a wonderful asset when implementing a new dock leveler. The curb angle sets allow the surface to have a smooth transition and an a eye appealing appearance when installing dock leveling equipment. The set comes in multiple pieces for the easy handling and positioning. MFG Part# CAS-RU-1000

Manufacturer: Vestil, Manufacturer Part Number: FOD/6'Optional leg option for in front of dock placement of 72 (in.) length for dockleveler.

Manufacturer: Vestil, Manufacturer Part Number: CAS-78Optional curb angle set. MFG Part# CAS-78

Manufacturer: Vestil, Manufacturer Part Number: WL-7HPOptional 7-1/2 HP Power Unit that is wired for three (3) phase 28-23/46V 6Hz, unit will pump 6 gallons per minute.