Ramps and Dock Plates

Manufacturer: Vestil, Manufacturer Part Number: BTA-06006054Size (W x L): 60" x 54", Ht. Difference (8°/17%): 6", Ht. Difference (11°/19%): 8", Capacity: 6,000 lbs – Aluminum Truck Dockboards with Welded Aluminum Curbs – Engineered and built to maximize safety while handling heavy fork trucks and loads. Locking legs prevent movement during loading and unloading operations. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Bend is 11° and 9" from the edge and the legs are 12" from the edge. Manufactured in compliance with OSHA.

Manufacturer: Vestil, Manufacturer Part Number: BTA-05006660Size (W x L): 66" x 60", Ht. Difference (8°/17%): 7", Ht. Difference (11°/19%): 10", Capacity: 5,000 lbs – Aluminum Truck Dockboards with Welded Aluminum Curbs – Engineered and built to maximize safety while handling heavy fork trucks and loads. Locking legs prevent movement during loading and unloading operations. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Bend is 11° and 9" from the edge and the legs are 12" from the edge. Manufactured in compliance with OSHA.

Manufacturer: Vestil, Manufacturer Part Number: BTA-05007836Size (W x L): 78" x 36", Ht. Difference (8°/17%): 4", Ht. Difference (11°/19%): 5", Capacity: 5,000 lbs – Aluminum Truck Dockboards with Welded Aluminum Curbs – Engineered and built to maximize safety while handling heavy fork trucks and loads. Locking legs prevent movement during loading and unloading operations. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Bend is 11° and 9" from the edge and the legs are 12" from the edge. Manufactured in compliance with OSHA.

Manufacturer: Vestil, Manufacturer Part Number: BTA-05007272Size (W x L): 72" x 72", Ht. Difference (8°/17%): 8", Ht. Difference (11°/19%): 11", Capacity: 5,000 lbs – Aluminum Truck Dockboards with Welded Aluminum Curbs – Engineered and built to maximize safety while handling heavy fork trucks and loads. Locking legs prevent movement during loading and unloading operations. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Bend is 11° and 9" from the edge and the legs are 12" from the edge. Manufactured in compliance with OSHA.

Manufacturer: Vestil, Manufacturer Part Number: BTA-05007260Size (W x L): 72" x 60", Ht. Difference (8°/17%): 7", Ht. Difference (11°/19%): 10", Capacity: 5,000 lbs – Aluminum Truck Dockboards with Welded Aluminum Curbs – Engineered and built to maximize safety while handling heavy fork trucks and loads. Locking legs prevent movement during loading and unloading operations. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Bend is 11° and 9" from the edge and the legs are 12" from the edge. Manufactured in compliance with OSHA.

Manufacturer: Vestil, Manufacturer Part Number: BTA-05007248Size (W x L): 72" x 48", Ht. Difference (8°/17%): 5", Ht. Difference (11°/19%): 7", Capacity: 5,000 lbs – Aluminum Truck Dockboards with Welded Aluminum Curbs – Engineered and built to maximize safety while handling heavy fork trucks and loads. Locking legs prevent movement during loading and unloading operations. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Bend is 11° and 9" from the edge and the legs are 12" from the edge. Manufactured in compliance with OSHA.

The Dock Curb Angle Set RU-800-F is designed to ensure a safe, smooth transition for dock leveler installations while improving the overall appearance and functionality of your loading area. Manufactured by Vestil, this curb angle set is crafted for easy handling and accurate positioning, making it a critical component for industrial dock operations.Product Specifications Dimensions: Approximately 113 × 88 (overall width near 104″) Manufacturer: Vestil Part Number: CAS-RU-800-F Intended Use: Enables seamless dock level transitions for safe and efficient installation Country of Origin: USA Key Benefits Multi-piece design that simplifies handling and positioning during installation Provides a secure, appealing transition to enhance dock leveler performance Built for industrial applications to support safety compliance and operational security The modular design of this curb angle set ensures that each component is easy to maneuver, leading to a straightforward installation process. Its robust construction not only boosts safety at the dock but also offers a professional and refined look.Shipping & Legal Information: Ships by truck; additional shipping costs may apply Please review all applicable safety warnings, including California Proposition 65 guidelines For more dock equipment and solutions, check out our Dock Plates collection.

Manufacturer: Vestil, Manufacturer Part Number: BTA-05006060Size (W x L): 60" x 60", Ht. Difference (8°/17%): 7", Ht. Difference (11°/19%): 10", Capacity: 5,000 lbs – Aluminum Truck Dockboards with Welded Aluminum Curbs – Engineered and built to maximize safety while handling heavy fork trucks and loads. Locking legs prevent movement during loading and unloading operations. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Bend is 11° and 9" from the edge and the legs are 12" from the edge. Manufactured in compliance with OSHA.

Manufacturer: Vestil, Manufacturer Part Number: AHTD-3696Overall Size: 36"W x 96"L, 16" Height Differential, Capacity: 800 Lbs. – Aluminum Hand Truck Dockboards – These dockboards are lightweight and can be carried and positioned by one person. Provides a safe and convenient bridge between dock and truck. Welded aluminum diamond tread surface and beveled edges provide safe and smooth entry and exit. The bend is designed to keep ramp edges flush with dock surface and truck floor. Equipped with bolted locking legs. Full length aluminum curbs provide hand holds and reduce chance of roll off. Designed for use with two wheel hand trucks. 3/16" plate thickness. Manufactured in compliance with OSHA (video available).

Manufacturer: Vestil, Manufacturer Part Number: AHTD-3672Overall Size: 36"W x 72"L, 13" Height Differential, Capacity: 800 Lbs. – Aluminum Hand Truck Dockboards – These dockboards are lightweight and can be carried and positioned by one person. Provides a safe and convenient bridge between dock and truck. Welded aluminum diamond tread surface and beveled edges provide safe and smooth entry and exit. The bend is designed to keep ramp edges flush with dock surface and truck floor. Equipped with bolted locking legs. Full length aluminum curbs provide hand holds and reduce chance of roll off. Designed for use with two wheel hand trucks. 3/16" plate thickness. Manufactured in compliance with OSHA (video available).

Manufacturer: Vestil, Manufacturer Part Number: TS-20-7260Constructed of high strength (55,000 psi) steel for long life. Beveled edges on both ends permit smooth entry and exit. Deck is diamond plated for safe, efficient use. Welded safety curbs for maximum strength. Locking legs minimize ramp movement and are uneven to allow the dockboard to sit canted for easier floor pickup by forklifts. Standard with leverlift for quick portability with fork truck. When using three wheeled fork trucks, select capacity +20% due to concentrated load on center of board. Optional accessories: lifting chains, span locks, span pins/holes and removable pickup loops. Manufactured in compliance with OSHA.SPECIFICATIONS20,000 lbs Capacity60" x 72" x 16.438" - 723 lbs.

Manufacturer: Vestil, Manufacturer Part Number: TS-15-6060Constructed of high strength (55,000 psi) steel for long life. Beveled edges on both ends permit smooth entry and exit. Deck is diamond plated for safe, efficient use. Welded safety curbs for maximum strength. Locking legs minimize ramp movement and are uneven to allow the dockboard to sit canted for easier floor pickup by forklifts. Standard with leverlift for quick portability with fork truck. When using three wheeled fork trucks, select capacity +20% due to concentrated load on center of board. Optional accessories: lifting chains, span locks, span pins/holes and removable pickup loops. Manufactured in compliance with OSHA.SPECIFICATIONS15,000 lbs Capacity60" x 60" x 15.375" - 537 lbs.

Manufacturer: Vestil, Manufacturer Part Number: TS-15-7260Constructed of high strength (55,000 psi) steel for long life. Beveled edges on both ends permit smooth entry and exit. Deck is diamond plated for safe, efficient use. Welded safety curbs for maximum strength. Locking legs minimize ramp movement and are uneven to allow the dockboard to sit canted for easier floor pickup by forklifts. Standard with leverlift for quick portability with fork truck. When using three wheeled fork trucks, select capacity +20% due to concentrated load on center of board. Optional accessories: lifting chains, span locks, span pins/holes and removable pickup loops. Manufactured in compliance with OSHA.SPECIFICATIONS15,000 lbs Capacity60" x 72" x 15.375" - 597 lbs.

Manufacturer: Vestil, Manufacturer Part Number: FM-2072The Edge-O-Dock leveler permanently attaches to face of dock. It is recommended for docks to be at least forty-eight (48) inches high. When the trailer departs, the lip drops automatically behind the face of the bumpers. Concrete recess is not required. It comes complete with bumpers and installation instructions. Standard Ramping is twenty-seven (29) inches, with a thirty-six (36-5/8) inch long ramping length available for smaller grade. A steel dock edge, or approach ramp is required for proper installation. The Mechanical Edge-O-Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically.

Manufacturer: Vestil, Manufacturer Part Number: TS-15-7248Constructed of high strength (55,000 psi) steel for long life. Beveled edges on both ends permit smooth entry and exit. Deck is diamond plated for safe, efficient use. Welded safety curbs for maximum strength. Locking legs minimize ramp movement and are uneven to allow the dockboard to sit canted for easier floor pickup by forklifts. Standard with leverlift for quick portability with fork truck. When using three wheeled fork trucks, select capacity +20% due to concentrated load on center of board. Optional accessories: lifting chains, span locks, span pins/holes and removable pickup loops. Manufactured in compliance with OSHA. SPECIFICATIONS15,000 lbs Capacity48" x 72" x 12.375" - 496 lbs.

Manufacturer: Vestil, Manufacturer Part Number: FM-2066The Edge-O-Dock leveler permanently attaches to face of dock. It is recommended for docks to be at least forty-eight (48) inches high. When the trailer departs, the lip drops automatically behind the face of the bumpers. Concrete recess is not required. It comes complete with bumpers and installation instructions. Standard Ramping is twenty-seven (29) inches, with a thirty-six (36-5/8) inch long ramping length available for smaller grade. A steel dock edge, or approach ramp is required for proper installation. The Mechanical Edge-O-Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically.

Manufacturer: Vestil, Manufacturer Part Number: E-4860Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with people to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid tread plate. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks. SPECIFICATIONS1,800 lbs Capacity60" x 48" x 12.5" - 128 lbs.

This heavy-duty steel container ramp is engineered for reliable performance in demanding industrial environments. Designed for durability and safe operation, it provides a smooth transition for loading and unloading shipping containers, making job sites safer and more efficient.OverviewThe Vestil steel container ramp is built to support up to 15,000 lbs while ensuring easy, secure handling of shipping containers. Its robust construction and innovative design enhance portability and storage, making it a smart choice for operations that demand efficiency and safety.Key Features 15,000 lbs Capacity: Confidently handles heavy loads with minimal effort. Hinged Flip–Over Bridge: Facilitates easy transport and storage of the ramp. Tapered Lip: Provides a smooth transition at various container heights. Built-In Fork Pockets: Ensures secure positioning for fork trucks. Technical Specifications Manufacturer: Vestil Part Number: SCR-84 Material: Heavy-duty steel construction Design: Engineered for easy installation and routine, safe use Benefits & ApplicationsThis steel container ramp is ideal for industrial and commercial environments that prioritize safety and operational efficiency. Its design offers a secure loading and unloading process while ensuring compact storage and effortless transport between sites. These practical features help reduce downtime and boost productivity, especially in manufacturing and construction settings.Enhance your logistics and material handling systems with this dependable ramp. For more industrial-grade solutions, visit our Container Ramps collection or explore additional options in our Material Handling section. Contact us today with any questions regarding installation or compatibility and experience the ultimate in safety and efficiency.

The 60x60 Heavy-Duty Container Ramp is designed for reliability, safety, and durability. Made from precision-engineered steel, this industrial container ramp provides secure and smooth transitions over uneven surfaces. Its robust construction is built to endure harsh weather and demanding work environments, making it the ideal solution for loading and unloading at a variety of locations.Key Features Heavy-duty, weather-resistant steel construction Beveled edges for smooth transitions and enhanced worker safety Non-slip, raised tread plate surface for secure footing Side curbs and pickup chains for stability and easy maneuverability Technical Specifications Manufacturer: Vestil | Part Number: CRS-6060-15 Dimensions: 60x60 inches Weight Capacity: Engineered to meet standard industrial load requirements Applicable Environments: Warehouses, shipping docks, and industrial sites This steel container ramp promotes safe loading and unloading by minimizing height differences and reducing the risk of injury. Its versatile design is compatible with a range of industrial vehicles, such as forklifts and pallet trucks, while providing efficient operation and mobility. For more materials handling solutions, check out our Material Handling collection and explore additional Container Ramps available at Spill 911.

The 14'L Portable Aluminum Twin Vehicle Ramp is designed to provide safe and efficient access from ground level to raised platforms. Built for durability and ease of use, this ramp is suitable for vans, pickup trucks, and certain passenger vehicles. Its sturdy welded aluminum construction and secure pin-lock docking mechanism make it a dependable option for industrial applications.Specifications• Uniform Capacity (lbs.): 5500• Working Height Range (in.): 25½ – 36½• Usable Width (in.): 14• Curb Height (in.): 1¼• Welded aluminum construction with pin-lock docking mechanismKey Benefits• Safety: Secure pin locks ensure stability during vehicle ramping, reducing the risk of slips.• Versatility: Ideal for a variety of vehicles, it provides smooth and reliable entry for raised building entrances.• Durability: Made from high-quality aluminum, the ramp is built to withstand demanding industrial environments.Usage InstructionsFor optimal performance, always measure the clearance and wheelbase of your vehicle to prevent any issues during use. The ramp is designed for easy setup and secure docking, ensuring efficient operation every time. For more products in this category, visit our Ramps and Dock Plates collection or explore our Vestil Collection for complementary industrial solutions.

Introducing the 72" Heavy Duty Steel Container Ramp by Vestil, designed for safe and efficient loading and unloading of shipping containers. This durable ramp is perfect for both industrial and commercial settings, ensuring dependable performance in demanding conditions. If you're in the market for a heavy duty steel container ramp that meets strict safety standards, this product is built to exceed your expectations.Key Features Uniform Capacity: Supports a load of 15,000 lbs, delivering reliable strength. Hinged Flip‑Over Design: Enables easy transportation and compact storage. Tapered Lip: Provides a smooth and secure transition into containers. Built‑in Fork Pockets: Facilitates convenient forklift positioning during operations. Benefits and UsageThis 72-inch container ramp offers a practical solution for heavy duty container loading tasks. Its rugged construction minimizes downtime and boosts operational efficiency, making the handling of shipping containers both safer and more manageable. Whether you work in manufacturing, construction, or another industrial field, the ramp’s design is ideal for both routine operations and emergency use. Enjoy hassle-free loading, optimized material handling, and enhanced workplace safety with a product built for long-term durability.Specifications Manufacturer: Vestil Manufacturer Part Number: SCR‑72 Experience outstanding quality and competitive pricing by purchasing this 72-inch steel ramp online today. For more industry-grade solutions, be sure to explore our Container Ramps collection.

This 12′L Portable Aluminum Twin Vehicle Ramp is crafted to provide safe, efficient access for vans, pickup trucks, and select passenger vehicles. Its lightweight yet durable aluminum construction allows for quick setup and easy transport while delivering solid performance in rugged conditions. Ideal for applications that require reliable material handling, this ramp ensures consistent performance even in demanding industrial settings.Key Features & Technical Specifications• Uniform Capacity of 5500 lbs – Designed with a generous safety margin for dependable use.• Working Height Range from 32½″ to 46″ – Accommodates a variety of high-entry building applications.• Usable Width of 14″ and Curb Height of 1¼″ – Ensures enhanced stability during vehicle transitions.• Secure Fastening System – Features pin locks that securely attach the ramp to your entry point.• Lightweight, Welded Aluminum Construction – Balances portability with long-term durability.Usage Tips & Safety Instructions• Verify vehicle compatibility by measuring the under-clearance and wheelbase before use.• Always ensure the ramp is securely locked with the provided pin locks.• Regularly inspect the ramp for any signs of wear or damage to maintain optimal performance.Engineered for quick assembly and designed with safety in mind, this ramp is perfect for both single and frequent multi-vehicle operations. Discover more solutions in our Ramps and Dock Plates collection to ensure your facility remains safe and compliant.

Introducing the 18'L Portable Aluminum Twin Vehicle Ramp from Vestil, designed for safety, durability, and versatility. This dual ramp system is a reliable solution for safely loading vans, pickup trucks, and other passenger vehicles onto elevated platforms. Its rugged aluminum construction and secure pin lock docking deliver a dependable performance built for industrial use.Key Specifications Manufacturer: Vestil Part Number: VTR-6-14-18 Uniform Capacity: 6000 lbs Working Height: 29 to 41 inches Ramp Width: 14 inches Curb Height: 1-1/4 inches Safety & Benefits Secure Docking: Integrated pin locks ensure the ramps are firmly fastened, reducing movement during use. Rugged Durability: Welded aluminum construction withstands heavy-duty operations and harsh environments. Vehicle Compatibility: Designed to accommodate various vehicles, this portable vehicle ramp minimizes the risk of hang-ups. Always verify your vehicle’s clearance and wheelbase for optimal use. Usage Tips Measure under-clearance and wheelbase prior to use. Install the ramps following detailed guidelines to ensure proper alignment and safety. Regularly check the pin locks to maintain secure docking. When safety and efficiency are paramount, this twin ramp offers an ideal solution for material handling needs. For a wider range of ramp and dock solutions, explore our Ramps and Dock Plates collection. Contact our support team for further guidance to ensure your installation meets the highest safety standards.

Experience safe and efficient vehicle loading with this high-quality aluminum twin ramp by Vestil. Engineered for vans, pickup trucks, and select passenger vehicles, it delivers dependable performance at elevated building entrances while ensuring a secure, smooth transition from ground level.Key Features• Uniform Capacity: 6000 lbs• Working Height Range: 22½ to 32 inches• Usable Width: 14 inches• Curb Height: 1¼ inches• Durable welded aluminum construction for a lightweight yet sturdy design• Secure pin locks provide a stable dock every timeUsage & Safety TipsBefore use, measure your vehicle’s underclearance and wheelbase to ensure an ideal fit and prevent any issues. The ramp’s pin locking system delivers fast and secure docking, making it ideal for fast-paced industrial and commercial settings. Its portability and simple setup also allow for easy storage when not in use.For more industrial handling solutions, visit our Vestil Collection or explore our Ramps and Dock Plates selection.