Decon

Manufacturer: Hughes, Manufacturer Part Number: H2GS-1HFor cold climates with a minimum ambient operating temperature of -4 °F (-20 °C) or above—trace tape heating with polyethylene jacket and polyurethane foam insulation improve frost protection and strength Suitable for both Class 1 Division 2 hazardous areas, as well as non-hazardous areas. Includes a universal safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements This freeze protected and insulated drench shower is intended for use where there is a possibility of the water inside of the shower freezing due to extreme cold climates. Ideal for use where space is at a premium, this wall mounted emergency drench shower features a specially designed, high-performance quarter-turn ball valve made of 316L stainless steel to endure the harshest environments and site conditions. Low operating torque to open valve offers reliable, easy on/off operation when emergencies occur. Valve includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel shower pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. The shower includes a removable, self-draining overhead nozzle designed for high flow rates that meet or exceed ANSI standards. Made of durable nylon material, the nozzle offers optimal spray distribution for user protection and water conservation. Solid construction using stainless steel pipework for added corrosion resistance. Some assembly may be required. Electrical supply: 120V Single Phase, 60/50HzSPECIFICATIONSActivation: Pull HandleMaterial Specifications: Polyurethane foam insulation with a medium density polyethylene impact resistant outer casing, Nozzle: Nylon 6

Manufacturer: Hughes, Manufacturer Part Number: 18GS85GRemovable, self-draining nozzle constructed from a durable nylon material High-performance quarter-turn ball valves made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Twin aerated diffusers with fine mesh strainers and an individual flow controller provide a soft, scrubbing action to the eyes and face Includes a universal eye wash and safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements Be prepared to respond to accidents with this all-in-one floor mounted combination safety shower with top water inlet that provides initial on-site treatment to eye/face or full body exposure to hazards. Suitable for use in applications that are not subject to the possibility of freezing or overheating. The system features a specially designed valve that includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. Designed for high flow rates that meet or exceed ANSI standards, the nozzle offers optimal spray distribution for user protection. Unlike shower rose designs, this compact nozzle reduces the potential for insect nesting and eliminates high replacement costs associated with cracked or dented plastic spray heads. Open stainless steel bowl eye/face wash with high, ANSI-compliant flow rate features twin spray nozzles with dust covers that pop-off when eye wash is activated via the highly visible push plate. Easy-to-reach flow regulator valve adjusts to suit the severity of the accident. Solid construction using stainless steel pipework for added corrosion resistance. Add optional foot treadle for a secondary means of eyewash activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: Stainless SteelActivation: Shower: Pull Handle, Eye/Face wash: Push PlateMaterial Specifications: Nozzle: Nylon 6, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: L33GS34GPowder coated stainless steel pipework, bowl, and rose ensures resistance to corrosive and flammable materials while also being easy to clean High-performance quarter-turn ball valves made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Includes a separate 16 x 12-in (407 x 305-mm) universal eye wash and safety shower sign for enhanced visibility, as well as an inspection record tag for recording test and service history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements Ideal for laboratories, schools and general light duty indoor use, this wall mounted emergency combination shower is suitable for use in applications that are not subject to the possibility of freezing or overheating. The system features specially designed valves with low operating torque offering reliable, easy on/off operation when emergencies occur. Valve includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel shower pull handle with nylon valve connection is easy to grip and activate for immediate water drenching from the shower rose that is designed for high flow rates. Open bowl eye/face wash with high, ANSI-compliant flow rate includes aerated diffusers with fine mesh strainers and an individual flow controller which provide a soft, scrubbing action to the eyes and face. Features twin spray nozzles with dust covers that pop-off when eye wash is activated via the push plate. Easy-to-reach flow regulator valve adjusts to suit the severity of the accident. Highly visible red push plate with universal hand and eye wash sign for simple activation. Add optional foot treadle for a secondary means of eyewash activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: Powder-Coated Stainless SteelActivation: Shower: Pull Handle, Eye/Face wash: Push PlateMaterial Specifications: Rose: Powder coated stainless steel, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: 18G45GTCovered bowl ensures that the eyewash nozzles and bowl remain clean and free from contamination at all times—no dust covers needed Twin aerated diffusers with fine mesh strainers and an individual flow controller provide a soft, scrubbing action to the eyes and face Removable, self-draining nozzle constructed from a durable nylon material High-performance quarter-turn ball valve made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Includes a universal eye wash and safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements Be prepared to respond to accidents with this all-in-one floor mounted combination safety shower with top water inlet that provides initial on-site treatment to eye/face or full body exposure to hazards. Suitable for use in applications that are not subject to the possibility of freezing or overheating. The system features a specially designed valve that includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. Designed for high flow rates that meet or exceed ANSI standards, the nozzle offers optimal spray distribution for user protection. Unlike shower rose designs, this compact nozzle reduces the potential for insect nesting and eliminates high replacement costs associated with cracked or dented plastic spray heads. Made of durable, corrosion-resistant acrylic capped ABS, the eye/face wash with high, ANSI-compliant flow rate features an integral lid connected to the water valve for automatic operation—activate by simply pulling down the lid. Easy-to-reach flow regulator valve positioned on the side of the bowl adjusts to suit the severity of the accident. Solid construction using galvanized mild steel pipework. Add optional foot treadle for a secondary means of eye wash activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: Acrylic-Capped ABS PlasticActivation: Shower: Pull Handle, Eye/Face wash: Pull Lid ForwardMaterial Specifications: Nozzle: Nylon 6, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: 18GS45GTCovered bowl ensures that the eyewash nozzles and bowl remain clean and free from contamination at all times—no dust covers needed Twin aerated diffusers with fine mesh strainers and an individual flow controller provide a soft, scrubbing action to the eyes and face Removable, self-draining nozzle constructed from a durable nylon material High-performance quarter-turn ball valve made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Includes a universal eye wash and safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements Be prepared to respond to accidents with this all-in-one floor mounted combination safety shower with top water inlet that provides initial on-site treatment to eye/face or full body exposure to hazards. Suitable for use in applications that are not subject to the possibility of freezing or overheating. The system features a specially designed valve that includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. Designed for high flow rates that meet or exceed ANSI standards, the nozzle offers optimal spray distribution for user protection. Unlike shower rose designs, this compact nozzle reduces the potential for insect nesting and eliminates high replacement costs associated with cracked or dented plastic spray heads. Made of durable, corrosion-resistant acrylic capped ABS, the eye/face wash with high, ANSI-compliant flow rate features an integral lid connected to the water valve for automatic operation—activate by simply pulling down the lid. Easy-to-reach flow regulator valve positioned on the side of the bowl adjusts to suit the severity of the accident. Solid construction using stainless steel pipework for added corrosion resistance. Add optional foot treadle for a secondary means of eye wash activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: Acrylic-Capped ABS PlasticActivation: Shower: Pull Handle, Eye/Face wash: Pull Lid ForwardMaterial Specifications: Nozzle: Nylon 6, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: 18G45GCovered bowl ensures that the eyewash nozzles and bowl remain clean and free from contamination at all times—no dust covers needed Twin aerated diffusers with fine mesh strainers and an individual flow controller provide a soft, scrubbing action to the eyes and face Removable, self-draining nozzle constructed from a durable nylon material High-performance quarter-turn ball valve made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Includes a universal eye wash and safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements Be prepared to respond to accidents with this all-in-one floor mounted combination safety shower with bottom water inlet that provides initial on-site treatment to eye/face or full body exposure to hazards. Suitable for use in applications that are not subject to the possibility of freezing or overheating. The system features a specially designed valve that includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. Designed for high flow rates that meet or exceed ANSI standards, the nozzle offers optimal spray distribution for user protection. Unlike shower rose designs, this compact nozzle reduces the potential for insect nesting and eliminates high replacement costs associated with cracked or dented plastic spray heads. Made of durable, corrosion-resistant acrylic capped ABS, the eye/face wash with high, ANSI-compliant flow rate features an integral lid connected to the water valve for automatic operation—activate by simply pulling down the lid. Easy-to-reach flow regulator valve positioned on the side of the bowl adjusts to suit the severity of the accident. Solid construction using galvanized mild steel pipework. Add optional foot treadle for a secondary means of eye wash activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: Acrylic-Capped ABS PlasticActivation: Shower: Pull Handle, Eye/Face wash: Pull Lid ForwardMaterial Specifications: Nozzle: Nylon 6, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: 18GS45GCovered bowl ensures that the eyewash nozzles and bowl remain clean and free from contamination at all times—no dust covers needed Twin aerated diffusers with fine mesh strainers and an individual flow controller provide a soft, scrubbing action to the eyes and face Removable, self-draining nozzle constructed from a durable nylon material High-performance quarter-turn ball valve made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Includes a universal eye wash and safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements Be prepared to respond to accidents with this all-in-one floor mounted combination safety shower with bottom water inlet that provides initial on-site treatment to eye/face or full body exposure to hazards. Suitable for use in applications that are not subject to the possibility of freezing or overheating. The system features a specially designed valve that includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. Designed for high flow rates that meet or exceed ANSI standards, the nozzle offers optimal spray distribution for user protection. Unlike shower rose designs, this compact nozzle reduces the potential for insect nesting and eliminates high replacement costs associated with cracked or dented plastic spray heads. Made of durable, corrosion-resistant acrylic capped ABS, the eye/face wash with high, ANSI-compliant flow rate features an integral lid connected to the water valve for automatic operation—activate by simply pulling down the lid. Easy-to-reach flow regulator valve positioned on the side of the bowl adjusts to suit the severity of the accident. Solid construction using stainless steel pipework for added corrosion resistance. Add optional foot treadle for a secondary means of eye wash activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: Acrylic-Capped ABS PlasticActivation: Shower: Pull Handle, Eye/Face wash: Pull Lid ForwardMaterial Specifications: Nozzle: Nylon 6, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: 33GS45GCovered bowl ensures that the eyewash nozzles and bowl remain clean and free from contamination at all times—no dust covers needed Twin aerated diffusers with fine mesh strainers and an individual flow controller provide a soft, scrubbing action to the eyes and face Removable, self-draining nozzle constructed from a durable nylon material High-performance quarter-turn ball valve made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Includes a universal eye wash and safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements Be prepared to respond to accidents with this all-in-one wall mounted combination safety shower with top water inlet that provides initial on-site treatment to eye/face or full body exposure to hazards. Suitable for use in applications that are not subject to the possibility of freezing or overheating. The system features a specially designed valve that includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. Designed for high flow rates that meet or exceed ANSI standards, the nozzle offers optimal spray distribution for user protection. Unlike shower rose designs, this compact nozzle reduces the potential for insect nesting and eliminates high replacement costs associated with cracked or dented plastic spray heads. Made of durable, corrosion-resistant acrylic capped ABS, the eye/face wash with high, ANSI-compliant flow rate features an integral lid connected to the water valve for automatic operation—activate by simply pulling down the lid. Easy-to-reach flow regulator valve positioned on the side of the bowl adjusts to suit the severity of the accident. Solid construction using stainless steel pipework for added corrosion resistance. Add optional foot treadle for a secondary means of eye wash activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: Acrylic-Capped ABS PlasticActivation: Shower: Pull Handle, Eye/Face wash: Pull Lid ForwardMaterial Specifications: Nozzle: Nylon 6, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: 18GS75GRemovable, self-draining nozzle constructed from a durable nylon material High-performance quarter-turn ball valves made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Twin aerated diffusers with fine mesh strainers and an individual flow controller provide a soft, scrubbing action to the eyes and face Includes a universal eye wash and safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements Be prepared to respond to accidents with this all-in-one floor mounted combination safety shower with top water inlet that provides initial on-site treatment to eye/face or full body exposure to hazards. Suitable for use in applications that are not subject to the possibility of freezing or overheating. The system features a specially designed valve that includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. Designed for high flow rates that meet or exceed ANSI standards, the nozzle offers optimal spray distribution for user protection. Unlike shower rose designs, this compact nozzle reduces the potential for insect nesting and eliminates high replacement costs associated with cracked or dented plastic spray heads. Open ABS plastic bowl eye/face wash with high, ANSI-compliant flow rate features twin spray nozzles with dust covers that pop-off when eye wash is activated via the highly visible push plate. Easy-to-reach flow regulator valve adjusts to suit the severity of the accident. Solid construction using stainless steel pipework for added corrosion resistance. Add optional foot treadle for a secondary means of eyewash activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: Yellow ABS PlasticActivation: Shower: Pull Handle, Eye/Face wash: Push PlateMaterial Specifications: Nozzle: Nylon 6, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: PORTA300-16EIdeal for use by civil and military fire services, chemical and petrochemical industries, armed services and civil defense units Hose legs become rigid under pressure to give 360 ° decontamination Compact and rugged carrying case duals as an effective base platform, complete with non-slip raised platform* Quickly deployed in less than a minute First responders, governments and the military have a duty to plan and prepare for the protection of the public in the event of an accident, disaster or attack using chemical, nuclear or biological agents. Lightweight yet robust for emergency use, this 16-nozzle portable decontamination shower removes contaminants from protective clothing prior to removal. The 1-1/2 in lay-flat rubber hoses form four shower legs, each of which is fitted with four spray nozzles. Once erected and coupled to a fire appliance using the 1-1/2 in NH (F) hose connection , water is admitted to the apparatus and the hoses become rigid under pressure, adopting a curved form to give 360 ° decontamination. *Unassembled Dimensions (W x D x H): 19.7 in (500 mm) x 7.5 in (190 mm) x 30.3 in (770 mm) Ideal for use by civil and military fire services, chemical and petrochemical industries, armed services and civil defense units Hose legs become rigid under pressure to give 360° decontamination Compact and rugged carrying case duals as an effective base platform, complete with non-slip raised platform Quickly deployed in less than a minute SPECIFICATIONSActivation: Upon activation of water source

Manufacturer: Hughes, Manufacturer Part Number: 40K45G-AMobile eye/face wash and shower provides a continuous flow of water for 1-1/2 minutes High-performance quarter-turn ball valves made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Covered, durable acrylic-capped ABS eye/face wash protects the bowl and eyewash diffusers from dust and debris—no dust covers needed Twin diffusers fitted with fine mesh strainers and a flow controller provide a gentle flow of aerated water and prevent further injury to the eyes This highly mobile, self-contained safety shower with eye/face wash holds 30-gallons (114-liter) of water for use in responding to potential accidents anywhere. Suitable for temporary use, this exclusive design features a corrosion-resistant, polypropylene-lined pressurized cylinder and only requires the connection of a hose from a water main to fill it ready for use. Easily maneuvered by one person, it incorporates a stainless steel frame and large diameter pneumatic tires—adjustable wheel spacing allows the unit to go through standard door openings. Built-in A-frame with towing hitch makes it simple to move longer distances or over uneven surfaces by using any small vehicle fitted with a standard tow ball. Disconnect shower arm for compact transportation. The eye/face wash with high, ANSI-compliant flow rate features an integral lid connected to the water valve for automatic operation—activate by simply pulling down the lid. Easy-to-reach flow regulator valve positioned on the side of the bowl adjusts to suit the severity of the accident. Suitable for Class 1 Division 2 hazardous areas, as well as non-hazardous areas.SPECIFICATIONSEye/Face Wash Bowl Material: Acrylic-Capped ABS PlasticActivation: Shower: Hand lever, Eye/Face: Pull lid forwardMaterial Specifications: Polypropylene-lined pressurized cylinder, Shower Valve: 316L Stainless, Eye Wash Valve: Chrome plated brass, Nozzle: Nylon 6 Red

Manufacturer: Justrite, Manufacturer Part Number: 28574Decon QuickBerm® Portable multi–zone decon stations help prevent environmental contamination. Single–piece construction — patented inside wall–support system forms watertight wash down zones. Quick and easy setup — no assembly required. Individual, leakproof zones prevent contaminated fluid from traveling from one zone to another. For emergency deployment, these multi–stage berms with patented interior walls create wash down zones that safely capture and contain contaminated solutions. Select from two–, three– or four–zone models. Watertight, lightweight PVC coated fabric provides wide range of chemical resistance. The 8–inch (203–mm) walls allow for easy entry and exit of the compartments. One 3/4–in GHT drain fitting per zone. Order optional grates to keep personnel above liquid. SPECIFICATIONS598 gal. Sump Capacity - 46 lbs1 berm6' x 20' x 8"

Manufacturer: DQE, Manufacturer Part Number: HMK1101AHigh Quality Decontamination that's AFFORDABLE! The DQE Standard Decontamination System is the industry's leading standalone solution. It offers quick setup, victim privacy, thorough decontamination and easy clean up. Can be configured to accommodate fully, semi and even nonambulatory victims. Allinclusive system comes complete with shower, privacy curtain, containment pool, elevation grids, handheld sprayer and carrying bags. Total output is 15 gpm (2.5 gpm per shower head). Single water inlet allows connection of a standard garden hose. Approximate setup time is 34 minutes (based on two trained responders). Assembled dimensions are 42” x 36” x 84”; unassembled dimensions are 74” x 27” x 27”. Unique quickconnects for fast assembly Fully collapsible design Six shower heads plus an independent handheld sprayer Heavyduty, chemicalresistant privacy enclosure Translucent roof panel allows light into shower for safety Shower stores and transports in two easytocarry vinyl bags SPECIFICATIONS192 lbs.1 unit

Manufacturer: Hughes, Manufacturer Part Number: H40K45G-A-1HFor cold climates with a minimum ambient operating temperature of -4 °F (-20 °C) or above—trace tape heating with polyethylene jacket and polyurethane foam insulation improve frost protection and strength Mobile eye/face wash and shower provides a continuous flow of water for 1-1/2 minutes High-performance quarter-turn ball valves made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Covered, durable acrylic-capped ABS eye/face wash protects the bowl and eyewash diffusers from dust and debris—no dust covers needed Twin diffusers fitted with fine mesh strainers and a flow controller provide a gentle flow of aerated water and prevent further injury to the eyes This highly mobile, self-contained safety shower with eye/face wash holds 30-gallons (114-liter) of water for use in responding to potential accidents anywhere. Suitable for temporary use, this exclusive design features a corrosion-resistant, polypropylene-lined pressurized cylinder and only requires the connection of a hose from a water main to fill it ready for use. Easily maneuvered by one person, it incorporates a stainless steel frame and large diameter pneumatic tires—adjustable wheel spacing allows the unit to go through standard door openings. Built-in A-frame with towing hitch makes it simple to move longer distances or over uneven surfaces by using any small vehicle fitted with a standard tow ball. Disconnect shower arm for compact transportation. The eye/face wash with high, ANSI-compliant flow rate features an integral lid connected to the water valve for automatic operation—activate by simply pulling down the lid. Easy-to-reach flow regulator valve positioned on the side of the bowl adjusts to suit the severity of the accident. Suitable for Class 1 Division 2 hazardous areas, as well as non-hazardous areas.SPECIFICATIONSEye/Face Wash Bowl Material: Acrylic-Capped ABS PlasticActivation: Shower: Hand lever, Eye/Face: Pull lid forwardMaterial Specifications: Polypropylene-lined pressurized cylinder with polyuerethane foam insulated polyethylene jacket, Shower Valve: 316L Stainless, Eye Wash Valve: Chrome plated brass, Nozzle: Nylon 6 Red

Manufacturer: DQE, Manufacturer Part Number: HM3101AWhen Time is of the Essence. Designed for field response, the Quick Response™ Shower is durably constructed to withstand frequent training and compact enough to fit in a portable carrying bag. The system includes the shower, containment pool, elevation grid and handheld sprayer sized right for easy transport and use. Total output is 7.5 gpm (2.5 gpm per shower head). Single water inlet allows connection of a standard garden hose. Approximate setup time is 23 minutes (based on one trained responder). Assembled dimensions are 43.2” x 46.8” x 88.8”; unassembled dimensions are 49” x 15.5” x 9.5”. Unique quickconnects for fast assembly Three shower heads plus an independent handheld sprayer Tough construction for frequent training and use Vinyl bag for shower storage and transport SPECIFICATIONS96 lbs.1 unit

Manufacturer: Hughes, Manufacturer Part Number: MHW2000-1Mobile eye/face wash and shower provides a continuous flow of tepid water for over 15 minutes Covered bowl ensures that the nozzles and bowl remain clean and free from contamination at all times—no dust covers needed High-performance quarter-turn ball valves made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Integral immersion heater, controlled by a dual safety thermostat, maintains the water in the tank at a constant temperature Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements Large capacity mobile shower with eye/face wash features a 528-gallon (2000-L) tank for reliable, effective treatment to accident victims in remote locations where a water supply is unavailable. Durable, chemical-resistant polyethylene tank incorporates an electric submersible pump. Constructed from a durable, corrosion-resistant acrylic capped ABS, the eye/face wash incorporates an integral lid connected to the water valve for automatic operation—activate by simply pulling down the lid. Easy-to-reach flow regulator valve positioned on side of bowl adjusts to suit the severity of the accident. Includes heavy-duty galvanized trailer with toe hitch featuring four braked wheels with standard trailer-type pneumatic tires for easy movement between locations. Includes a universal safety shower and eyewash sign for enhanced visibility. Suitable for use in non-hazardous areas. Electrical supply: 110V Single Phase, 60/50HzSPECIFICATIONSEye/Face Wash Bowl Material: Acrylic-Capped ABS PlasticActivation: Shower: Hand lever, Eye/Face: Pull lid forwardMaterial Specifications: Twin torsion beam axels fitted with auto reverse brakes. 6615 lb auto reverse coupling fitted with a 2 in coupler, break away cable and parking break lever. Tank: High Density Polyethylene, Chasis: Heavy duty galvanized steel, Nozzle: Nylon 6 red

Manufacturer: Hughes, Manufacturer Part Number: OPT100Fitted with pop-off dust cover, a non-return valve and flow regulator Complete with 4.9-feet (1.5-m) of reinforced hose, particularly useful for treating disabled personnel Lock-on actuating button for ease of use Wall mounted handheld drench hose with in-line single nozzle for hazardous environments where there is a risk of small spillages of chemicals or dangerous substances. Includes an inspection record tag for recording test and service history.SPECIFICATIONSActivation: Squeeze grip operated with lock-on actuating buttonMaterial Specifications: Body: Polyarylamide (reinforced with glass fibers), Nozzles: Powder coated brass, Eye Cups: EPDM

Manufacturer: Hughes, Manufacturer Part Number: OPT50Drench hose for use with 15GEW pressurized, keg-mounted eye/face wash. For decontamination of body parts subjected to minor exposure. Quick installation - 1/2-in NPT (M) connection Flexible 34-inch (864-mm) drench hose with cap to keep debris off diffuser Chrome plated brass valveSPECIFICATIONSActivation: Hand operated lever

Manufacturer: Hughes, Manufacturer Part Number: OPT500Fitted with pop-off dust covers, a non-return valve and flow regulator Complete with 4.9-feet (1.5-m) of reinforced hose, particularly useful for treating disabled personnel Lock-on actuating button for ease of use Wall mounted hand-held eye/face wash with 45 degree angled double nozzles for hazardous environments where there is a risk of small spillages of chemicals or dangerous substances. Meets ANSI and EN 15154 water flow standards for an eye/face wash. Includes an inspection record tag for recording test and service history.SPECIFICATIONSActivation: Squeeze grip operated with lock-on actuating buttonMaterial Specifications: Body: Polyarylamide (reinforced with glass fibers), Nozzles: Powder coated brass, Eye Cups: EPDM

Manufacturer: Hughes, Manufacturer Part Number: NOZZLEDesigned for high flow rates that meet or exceed ANSI standards, the nozzle offers optimal spray distribution for user protection. Unlike shower rose designs, this compact nozzle reduces the potential for insect nesting and eliminates high replacement costs associated with cracked or dented plastic spray heads. Removable, self-draining 1-in NPT nozzle Contructed from a durable nylon material For retrofit onto any installed safety shower system with 1-inch pipe threadsSPECIFICATIONSMaterial Specifications: Nylon 6

Manufacturer: Hughes, Manufacturer Part Number: ABS-ROSEAn alternative to the standard shower nozzle on most unheated safety showers, simply replace the existing nozzle with the rose. Durable, yellow ABS material with 10-inch (252-mm) diameter.SPECIFICATIONSMaterial Specifications: ABS

Manufacturer: Hughes, Manufacturer Part Number: ES-BRAC-SIGN-HUniversal pictogram safety shower and eye/face wash sign with brackets for outdoor showers with insulation. Designed to meet international standard BS EN ISO 7010, these durable PVC signs are white on a green background.SPECIFICATIONSMaterial Specifications: PVC Sign with Plastic Brackets

Manufacturer: Hughes, Manufacturer Part Number: SD18GSIntended for use outdoors, in warm climates with a maximum ambient operating temperature of 113 °F (45 °C) or below Self-draining valve allows standing water to drain away from the standpipe ensuring the delivery of tepid water Includes a universal safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements Use self-draining showers in hot climates to prevent the risk of shock and scalding from standing water overheated by solar radiation. Self-draining valve is situated directly above the water inlet and bleed pipe is fitted above this so hot water drains into the ground. The standpipe only fills with water when the shower is activated and drains once again when valve is closed, preventing stagnant water in the standpipe overheating and removing the risk of further injury to the operator. The system features a specially designed, high-performance quarter-turn ball valve made of 316L stainless steel to endure the harshest environments and site conditions. Low operating torque to open valve offers reliable, easy on/off operation when emergencies occur. Valve includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. The shower includes a removable, self-draining overhead nozzle designed for high flow rates that meet or exceed ANSI standards. Made of durable nylon material, the nozzle offers optimal spray distribution for user protection. Unlike shower rose designs, this compact nozzle reduces the potential for insect nesting and eliminates high replacement costs associated with cracked or dented plastic spray heads. Solid construction using stainless steel pipework for added corrosion resistance. Some assembly may be required.SPECIFICATIONSActivation: Pull HandleMaterial Specifications: Nozzle: Nylon 6

Manufacturer: Hughes, Manufacturer Part Number: SIGN-BRACReplacement brackets for mounting universal pictogram signs on indoor and outdoor safety showers without insulation. Set of 2.SPECIFICATIONSMaterial Specifications: Steel