Manufacturer: Hughes, Manufacturer Part Number: AQ2000For use with 528 US gallon (2000 liter) emergency tank showers, these non-chemical disinfecting modules provide constant protection against infestations of pathogenic bacteria in water treatment systems. Immersed in water, the complex integral electrolytic activity of the ceramic media produces constant oxidizing, while the noble metal in the form of a fine matrix format produces ionization. The ionization of the noble metal is enhanced by the ceramic media and the combined effect is to act as a powerful disinfectant producing exceptional kill rates against pathogenic bacteria. Additionally, the electrolytic activity of the ceramic media produces a chemical re-action that balances the pH of the water. This results in additional benefits in the form of scale inhibition and corrosion prevention. Optimum operating life of 3 years.SPECIFICATIONSMaterial Specifications: Ceramic Media

Manufacturer: Hughes, Manufacturer Part Number: AQ1200For use with 317 US gallon (1200 liter) emergency tank showers, these non-chemical disinfecting modules provide constant protection against infestations of pathogenic bacteria in water treatment systems. Immersed in water, the complex integral electrolytic activity of the ceramic media produces constant oxidizing, while the noble metal in the form of a fine matrix format produces ionization. The ionization of the noble metal is enhanced by the ceramic media and the combined effect is to act as a powerful disinfectant producing exceptional kill rates against pathogenic bacteria. Additionally, the electrolytic activity of the ceramic media produces a chemical re-action that balances the pH of the water. This results in additional benefits in the form of scale inhibition and corrosion prevention. Optimum operating life of 3 years.SPECIFICATIONSMaterial Specifications: Ceramic Media

Manufacturer: Hughes, Manufacturer Part Number: QS1200An integral immersion heater, 110V general purpose rated, controlled by a dual safety thermostat, maintains the water in the insulated tank at a constant tepid temperature Rectangular hollow section galvanized steel frames are designed and built to be earthquake-proof and conform to the California Building Code Internally mounted, covered eye/face wash unit protects against dust and debris—activate by lifting the lid Low-pressure shower rose delivers large quantities of water in an even pattern that is non-injurious to the user External water level indicator provides visibility to tank levels Ready for quick delivery—packed for economical shipment and assembly on-site Emergency tank showers are essential to providing safe working conditions where insufficient water pressure exists or when it is impractical to use a plumbed-in safety shower. The 317 gallon (1200 liter) model provides tepid water even when there is no mains water supply. In an emergency, the shower actives quickly with a simple push of the panic bar. Intended for use in applications within a termperature range of 14 °F(-10 °C) to 104 °(40 °C). Assebmly required. Electrical supply: 110V Single Phase, 60/50Hz Note: This tank shower is ANSI compliant for the 15 minute time requirement only when connected to a plumbed water source.SPECIFICATIONSEye/Face Wash Bowl Material: GRP CompositeActivation: Shower: Push Bar, Eye/Face wash: Lift Lid UpMaterial Specifications: Frame: Galvanized Steel, Tank: Medium Density Polyethylene, Tank Casing and Lid: Heavy-duty GRP, Nozzle: Nylon 6

Manufacturer: Hughes, Manufacturer Part Number: QS2000An integral immersion heater, 110V general purpose rated, controlled by a dual safety thermostat, maintains the water in the insulated tank at a constant tepid temperature Rectangular hollow section galvanized steel frames are designed and built to be earthquake-proof and conform to the California Building Code Internally mounted, covered GRP composite eye/face wash unit protects against dust and debris—activate by lifting the lid Low-pressure shower rose delivers large quantities of water in an even pattern that is non-injurious to the user External water level indicator provides visibility to tank levels Ready for quick delivery—packed for economical shipment and assembly on-site Emergency tank showers are essential to providing safe working conditions where insufficient water pressure exists or when it is impractical to use a plumbed-in safety shower. The 528 gallon (2000 liter) shower is designed to meet and exceed ANSI and European standards by providing tepid water for over 15 minutes at a guaranteed flow of 20 US gallons (76 liters) per minute, even when there is no mains water supply. In an emergency, the shower actives quickly with a simple push of the panic bar. Intended for use in applications within a termperature range of 14 °F(-10 °C) to 104 °(40 °C). Assebmly required. Electrical supply: 110V Single Phase, 60/50HzSPECIFICATIONSEye/Face Wash Bowl Material: GRP CompositeActivation: Shower: Push Bar, Eye/Face wash: Lift Lid UpMaterial Specifications: Frame: Galvanized Steel, Tank: Medium Density Polyethylene, Tank Casing and Lid: Heavy-duty GRP, Nozzle: Nylon 6

Manufacturer: Hughes, Manufacturer Part Number: SD18GS85GUse outdoors, in warm climates with a maximum ambient operating temperature of 113 °F (45 °C) or below Self-draining valve allows standing water to drain away from the standpipe ensuring the delivery of tepid water Includes a universal eye wash and safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements Use self-draining showers in hot climates to prevent the risk of shock and scalding from standing water overheated by solar radiation. Self-draining valve is situated directly above the water inlet and bleed pipe is fitted above this so hot water drains into the ground. The standpipe only fills with water when the shower is activated and drains once again when valve is closed, preventing stagnant water in the standpipe overheating and removing the risk of further injury to the operator. The system features specially designed, high-performance quarter-turn ball valves made of 316L stainless steel to endure the harshest environments and site conditions. Low operating torque to open valve offers reliable, easy on/off operation when emergencies occur. Valve includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel shower pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. The shower includes a removable, self-draining overhead nozzle designed for high flow rates that meet or exceed ANSI standards. Made of durable nylon material, the nozzle offers optimal spray distribution for user protection. Unlike shower rose designs, this compact nozzle reduces the potential for insect nesting and eliminates high replacement costs associated with cracked or dented plastic spray heads. Open stainless steel bowl eye/face wash with high, ANSI-compliant flow rate includes aerated diffusers with fine mesh strainers and an individual flow controller which provide a soft, scrubbing action to the eyes and face. Features twin spray nozzles with dust covers that pop-off when eye wash is activated via the push plate. Easy-to-reach flow regulator valve adjusts to suit the severity of the accident. Solid construction using stainless steel pipework for improved corrosion resistance. Add optional foot treadle for a secondary means of eyewash activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: Stainless SteelActivation: Shower: Hand lever, Eye/Face wash: Hand leverMaterial Specifications: Nozzle: Nylon 6, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: H2G-1HFor cold climates with a minimum ambient operating temperature of -4 °F (-20 °C) or above—trace tape heating with polyethylene jacket and polyurethane foam insulation improve frost protection and strength Suitable for both Class 1 Division 2 hazardous areas, as well as non-hazardous areas. Includes a universal safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements This freeze protected and insulated drench shower is intended for use where there is a possibility of the water inside of the shower freezing due to extreme cold climates. Ideal for use where space is at a premium, this wall mounted emergency drench shower features a specially designed, high-performance quarter-turn ball valve made of 316L stainless steel to endure the harshest environments and site conditions. Low operating torque to open valve offers reliable, easy on/off operation when emergencies occur. Valve includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel shower pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. The shower includes a removable, self-draining overhead nozzle designed for high flow rates that meet or exceed ANSI standards. Made of durable nylon material, the nozzle offers optimal spray distribution for user protection and water conservation. Solid construction using galvanized mild steel pipework. Some assembly may be required. Electrical supply: 120V Single Phase, 60/50HzSPECIFICATIONSActivation: Pull HandleMaterial Specifications: Polyurethane foam insulation with a medium density polyethylene impact resistant outer casing, Nozzle: Nylon 6

Manufacturer: Hughes, Manufacturer Part Number: H5G45G-2HFor cold climates with a minimum ambient operating temperature of -4 °F (-20 °C) or above—trace tape heating with polyethylene jacket and polyurethane foam insulation improve frost protection and strength Covered acrylic-capped ABS eye/face wash protects the bowl and eyewash diffusers from dust and debris—no dust covers needed Suitable for both Class 1 Division 2 hazardous areas, as well as non-hazardous areas Includes a universal safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements This freeze protected and insulated shower is intended for use where there is a possibility of the water inside of the shower freezing due to extreme cold climates. This floor mounted emergency combination shower features a specially designed, high-performance quarter-turn ball valve made of 316L stainless steel to endure the harshest environments and site conditions. Low operating torque to open valve offers reliable, easy on/off operation when emergencies occur. Valve includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel shower pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. The shower includes a removable, self-draining overhead nozzle designed for high flow rates that meet or exceed ANSI standards. Constructed from a durable nylon material, the nozzle offers optimal spray distribution for user protection. Made of tough, corrosion-resistant acrylic capped ABS, the covered eye/face wash incorporates an integral lid connected to the water valve for automatic operation—activate by simply pulling down the lid. Easy-to-reach flow regulator valve positioned on side of bowl adjusts to suit the severity of the accident. Solid construction using galvanized mild steel pipework. Some assembly may be required. Electrical supply: 240V Single Phase, 60/50HzSPECIFICATIONSEye/Face Wash Bowl Material: Acrylic-Capped ABS PlasticActivation: Shower: Pull Handle, Eye/Face wash: Pull Lid ForwardMaterial Specifications: Polyurethane foam insulation with a medium density polyethylene impact resistant outer casing, Nozzle: Nylon 6, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: H5GS45G-2HFor cold climates with a minimum ambient operating temperature of -4 °F (-20 °C) or above—trace tape heating with polyethylene jacket and polyurethane foam insulation improve frost protection and strength Covered acrylic-capped ABS eye/face wash protects the bowl and eyewash diffusers from dust and debris—no dust covers needed Suitable for both Class 1 Division 2 hazardous areas, as well as non-hazardous areas Includes a universal safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements This freeze protected and insulated shower is intended for use where there is a possibility of the water inside of the shower freezing due to extreme cold climates. This floor mounted emergency combination shower features a specially designed, high-performance quarter-turn ball valve made of 316L stainless steel to endure the harshest environments and site conditions. Low operating torque to open valve offers reliable, easy on/off operation when emergencies occur. Valve includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel shower pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. The shower includes a removable, self-draining overhead nozzle designed for high flow rates that meet or exceed ANSI standards. Constructed from a durable nylon material, the nozzle offers optimal spray distribution for user protection. Made of tough, corrosion-resistant acrylic capped ABS, the covered eye/face wash incorporates an integral lid connected to the water valve for automatic operation—activate by simply pulling down the lid. Easy-to-reach flow regulator valve positioned on side of bowl adjusts to suit the severity of the accident. Solid construction using stainless steel pipework for improved corrosion resistance. Some assembly may be required. Electrical supply: 240V Single Phase, 60/50HzSPECIFICATIONSEye/Face Wash Bowl Material: Acrylic-Capped ABS PlasticActivation: Shower: Pull Handle, Eye/Face wash: Pull Lid ForwardMaterial Specifications: Polyurethane foam insulation with a medium density polyethylene impact resistant outer casing, Nozzle: Nylon 6, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: H5G-2HFor cold climates with a minimum ambient operating temperature of -4 °F (-20 °C) or above—trace tape heating with polyethylene jacket and polyurethane foam insulation improve frost protection and strength Suitable for both Class 1 Division 2 hazardous areas, as well as non-hazardous areas Includes a universal safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements This freeze protected and insulated drench shower is intended for use where there is a possibility of the water inside of the shower freezing due to extreme cold climates. This floor mounted emergency drench shower features specially designed, high-performance quarter-turn ball valve made of 316L stainless steel to endure the harshest environments and site conditions. Low operating torque to open valve offers reliable, easy on/off operation when emergencies occur. Valve includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel shower pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. Shower features a removable, self-draining overhead nozzle designed for high flow rates that meet or exceed ANSI standards. Made of durable nylon material, the nozzle offers optimal spray distribution for user protection. Solid construction using galvanized mild steel pipework. Some assembly may be required. Electrical supply: 240V Single Phase, 60/50HzSPECIFICATIONSActivation: Pull HandleMaterial Specifications: Polyurethane foam insulation with a medium density polyethylene impact resistant outer casing, Nozzle: Nylon 6

Manufacturer: Hughes, Manufacturer Part Number: H5GS-2HFor cold climates with a minimum ambient operating temperature of -4 °F (-20 °C) or above—trace tape heating with polyethylene jacket and polyurethane foam insulation improve frost protection and strength Suitable for both Class 1 Division 2 hazardous areas, as well as non-hazardous areas Includes a universal safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements This freeze protected and insulated drench shower is intended for use where there is a possibility of the water inside of the shower freezing due to extreme cold climates. This floor mounted emergency drench shower features specially designed, high-performance quarter-turn ball valve made of 316L stainless steel to endure the harshest environments and site conditions. Low operating torque to open valve offers reliable, easy on/off operation when emergencies occur. Valve includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel shower pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. Shower features a removable, self-draining overhead nozzle designed for high flow rates that meet or exceed ANSI standards. Made of durable nylon material, the nozzle offers optimal spray distribution for user protection. Solid construction using stainless steel pipework for improved corrosion resistance. Some assembly may be required. Electrical supply: 240V Single Phase, 60/50HzSPECIFICATIONSActivation: Pull HandleMaterial Specifications: Polyurethane foam insulation with a medium density polyethylene impact resistant outer casing, Nozzle: Nylon 6

Manufacturer: Hughes, Manufacturer Part Number: H5GS45G-1HFor cold climates with a minimum ambient operating temperature of -4 °F (-20 °C) or above—trace tape heating with polyethylene jacket and polyurethane foam insulation improve frost protection and strength Covered acrylic-capped ABS eye/face wash protects the bowl and eyewash diffusers from dust and debris—no dust covers needed Suitable for both Class 1 Division 2 hazardous areas, as well as non-hazardous areas Includes a universal safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements This freeze protected and insulated shower is intended for use where there is a possibility of the water inside of the shower freezing due to extreme cold climates. This floor mounted emergency combination shower features a specially designed, high-performance quarter-turn ball valve made of 316L stainless steel to endure the harshest environments and site conditions. Low operating torque to open valve offers reliable, easy on/off operation when emergencies occur. Valve includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel shower pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. The shower includes a removable, self-draining overhead nozzle designed for high flow rates that meet or exceed ANSI standards. Constructed from a durable nylon material, the nozzle offers optimal spray distribution for user protection. Made of tough, corrosion-resistant acrylic capped ABS, the covered eye/face wash incorporates an integral lid connected to the water valve for automatic operation—activate by simply pulling down the lid. Easy-to-reach flow regulator valve positioned on side of bowl adjusts to suit the severity of the accident. Solid construction using stainless steel pipework for improved corrosion resistance. Some assembly may be required. Electrical supply: 120V Single Phase, 60/50HzSPECIFICATIONSEye/Face Wash Bowl Material: Acrylic-Capped ABS PlasticActivation: Shower: Pull Handle, Eye/Face wash: Pull Lid ForwardMaterial Specifications: Polyurethane foam insulation with a medium density polyethylene impact resistant outer casing, Nozzle: Nylon 6, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: H5G45G-1HFor cold climates with a minimum ambient operating temperature of -4 °F (-20 °C) or above—trace tape heating with polyethylene jacket and polyurethane foam insulation improve frost protection and strength Covered acrylic-capped ABS eye/face wash protects the bowl and eyewash diffusers from dust and debris—no dust covers needed Suitable for both Class 1 Division 2 hazardous areas, as well as non-hazardous areas Includes a universal safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements This freeze protected and insulated shower is intended for use where there is a possibility of the water inside of the shower freezing due to extreme cold climates. This floor mounted emergency combination shower features a specially designed, high-performance quarter-turn ball valve made of 316L stainless steel to endure the harshest environments and site conditions. Low operating torque to open valve offers reliable, easy on/off operation when emergencies occur. Valve includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel shower pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. The shower includes a removable, self-draining overhead nozzle designed for high flow rates that meet or exceed ANSI standards. Constructed from a durable nylon material, the nozzle offers optimal spray distribution for user protection. Made of tough, corrosion-resistant acrylic capped ABS, the covered eye/face wash incorporates an integral lid connected to the water valve for automatic operation—activate by simply pulling down the lid. Easy-to-reach flow regulator valve positioned on side of bowl adjusts to suit the severity of the accident. Solid construction using galvanized mild steel pipework. Some assembly may be required. Electrical supply: 120V Single Phase, 60/50HzSPECIFICATIONSEye/Face Wash Bowl Material: Acrylic-Capped ABS PlasticActivation: Shower: Pull Handle, Eye/Face wash: Pull Lid ForwardMaterial Specifications: Polyurethane foam insulation with a medium density polyethylene impact resistant outer casing, Nozzle: Nylon 6, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: H5GS-1HFor cold climates with a minimum ambient operating temperature of -4 °F (-20 °C) or above—trace tape heating with polyethylene jacket and polyurethane foam insulation improve frost protection and strength Suitable for both Class 1 Division 2 hazardous areas, as well as non-hazardous areas Includes a universal safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements This freeze protected and insulated drench shower is intended for use where there is a possibility of the water inside of the shower freezing due to extreme cold climates. This floor mounted emergency drench shower features specially designed, high-performance quarter-turn ball valve made of 316L stainless steel to endure the harshest environments and site conditions. Low operating torque to open valve offers reliable, easy on/off operation when emergencies occur. Valve includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel shower pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. Shower features a removable, self-draining overhead nozzle designed for high flow rates that meet or exceed ANSI standards. Made of durable nylon material, the nozzle offers optimal spray distribution for user protection. Solid construction using stainless steel pipework for improved corrosion resistance. Some assembly may be required. Electrical supply: 120V Single Phase, 60/50HzSPECIFICATIONSActivation: Pull HandleMaterial Specifications: Polyurethane foam insulation with a medium density polyethylene impact resistant outer casing, Nozzle: Nylon 6

Manufacturer: Hughes, Manufacturer Part Number: H2G-2HFor cold climates with a minimum ambient operating temperature of -4 °F (-20 °C) or above—trace tape heating with polyethylene jacket and polyurethane foam insulation improve frost protection and strength Suitable for both Class 1 Division 2 hazardous areas, as well as non-hazardous areas. Includes a universal safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements This freeze protected and insulated drench shower is intended for use where there is a possibility of the water inside of the shower freezing due to extreme cold climates. Ideal for use where space is at a premium, this wall mounted emergency drench shower features a specially designed, high-performance quarter-turn ball valve made of 316L stainless steel to endure the harshest environments and site conditions. Low operating torque to open valve offers reliable, easy on/off operation when emergencies occur. Valve includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel shower pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. The shower includes a removable, self-draining overhead nozzle designed for high flow rates that meet or exceed ANSI standards. Made of durable nylon material, the nozzle offers optimal spray distribution for user protection and water conservation. Solid construction using galvanized mild steel pipework. Some assembly may be required. Electrical supply: 240V Single Phase, 60/50HzSPECIFICATIONSActivation: Pull HandleMaterial Specifications: Polyurethane foam insulation with a medium density polyethylene impact resistant outer casing, Nozzle: Nylon 6

Manufacturer: Hughes, Manufacturer Part Number: H5G-1HFor cold climates with a minimum ambient operating temperature of -4 °F (-20 °C) or above—trace tape heating with polyethylene jacket and polyurethane foam insulation improve frost protection and strength Suitable for both Class 1 Division 2 hazardous areas, as well as non-hazardous areas Includes a universal safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements This freeze protected and insulated drench shower is intended for use where there is a possibility of the water inside of the shower freezing due to extreme cold climates. This floor mounted emergency drench shower features specially designed, high-performance quarter-turn ball valve made of 316L stainless steel to endure the harshest environments and site conditions. Low operating torque to open valve offers reliable, easy on/off operation when emergencies occur. Valve includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel shower pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. Shower features a removable, self-draining overhead nozzle designed for high flow rates that meet or exceed ANSI standards. Made of durable nylon material, the nozzle offers optimal spray distribution for user protection. Solid construction using galvanized mild steel pipework. Some assembly may be required. Electrical supply: 120V Single Phase, 60/50HzSPECIFICATIONSActivation: Pull HandleMaterial Specifications: Polyurethane foam insulation with a medium density polyethylene impact resistant outer casing, Nozzle: Nylon 6

Manufacturer: Hughes, Manufacturer Part Number: SD18GS75GUse outdoors, in warm climates with a maximum ambient operating temperature of 113 °F (45 °C) or below Self-draining valve allows standing water to drain away from the standpipe ensuring the delivery of tepid water Includes a universal eye wash and safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements Use self-draining showers in hot climates to prevent the risk of shock and scalding from standing water overheated by solar radiation. Self-draining valve is situated directly above the water inlet and bleed pipe is fitted above this so hot water drains into the ground. The standpipe only fills with water when the shower is activated and drains once again when valve is closed, preventing stagnant water in the standpipe overheating and removing the risk of further injury to the operator. The system features specially designed, high-performance quarter-turn ball valves made of 316L stainless steel to endure the harshest environments and site conditions. Low operating torque to open valve offers reliable, easy on/off operation when emergencies occur. Valve includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel shower pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. The shower includes a removable, self-draining overhead nozzle designed for high flow rates that meet or exceed ANSI standards. Made of durable nylon material, the nozzle offers optimal spray distribution for user protection. Unlike shower rose designs, this compact nozzle reduces the potential for insect nesting and eliminates high replacement costs associated with cracked or dented plastic spray heads. Open ABS plastic bowl eye/face wash with high, ANSI-compliant flow rate includes aerated diffusers with fine mesh strainers and an individual flow controller which provide a soft, scrubbing action to the eyes and face. Features twin spray nozzles with dust covers that pop-off when eye wash is activated via the push plate. Easy-to-reach flow regulator valve adjusts to suit the severity of the accident. Solid construction using stainless steel pipework for improved corrosion resistance. Add optional foot treadle for a secondary means of eyewash activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: ABS PlasticActivation: Shower: Hand lever, Eye/Face wash: Hand leverMaterial Specifications: Nozzle: Nylon 6, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: SD18G75GUse outdoors, in warm climates with a maximum ambient operating temperature of 113 °F (45 °C) or below Self-draining valve allows standing water to drain away from the standpipe ensuring the delivery of tepid water Includes a universal eye wash and safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements Use self-draining showers in hot climates to prevent the risk of shock and scalding from standing water overheated by solar radiation. Self-draining valve is situated directly above the water inlet and bleed pipe is fitted above this so hot water drains into the ground. The standpipe only fills with water when the shower is activated and drains once again when valve is closed, preventing stagnant water in the standpipe overheating and removing the risk of further injury to the operator. The system features specially designed, high-performance quarter-turn ball valves made of 316L stainless steel to endure the harshest environments and site conditions. Low operating torque to open valve offers reliable, easy on/off operation when emergencies occur. Valve includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel shower pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. The shower includes a removable, self-draining overhead nozzle designed for high flow rates that meet or exceed ANSI standards. Made of durable nylon material, the nozzle offers optimal spray distribution for user protection. Unlike shower rose designs, this compact nozzle reduces the potential for insect nesting and eliminates high replacement costs associated with cracked or dented plastic spray heads. Open ABS plastic bowl eye/face wash with high, ANSI-compliant flow rate includes aerated diffusers with fine mesh strainers and an individual flow controller which provide a soft, scrubbing action to the eyes and face. Features twin spray nozzles with dust covers that pop-off when eye wash is activated via the push plate. Easy-to-reach flow regulator valve adjusts to suit the severity of the accident. Solid construction using galvanized mild steel pipework. Add optional foot treadle for a secondary means of eyewash activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: ABS PlasticActivation: Shower: Hand lever, Eye/Face wash: Hand leverMaterial Specifications: Nozzle: Nylon 6, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: SD18G85GUse outdoors, in warm climates with a maximum ambient operating temperature of 113 °F (45 °C) or below Self-draining valve allows standing water to drain away from the standpipe ensuring the delivery of tepid water Includes a universal eye wash and safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements Use self-draining showers in hot climates to prevent the risk of shock and scalding from standing water overheated by solar radiation. Self-draining valve is situated directly above the water inlet and bleed pipe is fitted above this so hot water drains into the ground. The standpipe only fills with water when the shower is activated and drains once again when valve is closed, preventing stagnant water in the standpipe overheating and removing the risk of further injury to the operator. The system features specially designed, high-performance quarter-turn ball valves made of 316L stainless steel to endure the harshest environments and site conditions. Low operating torque to open valve offers reliable, easy on/off operation when emergencies occur. Valve includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel shower pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. The shower includes a removable, self-draining overhead nozzle designed for high flow rates that meet or exceed ANSI standards. Made of durable nylon material, the nozzle offers optimal spray distribution for user protection. Unlike shower rose designs, this compact nozzle reduces the potential for insect nesting and eliminates high replacement costs associated with cracked or dented plastic spray heads. Open stainless steel bowl eye/face wash with high, ANSI-compliant flow rate includes aerated diffusers with fine mesh strainers and an individual flow controller which provide a soft, scrubbing action to the eyes and face. Features twin spray nozzles with dust covers that pop-off when eye wash is activated via the push plate. Easy-to-reach flow regulator valve adjusts to suit the severity of the accident. Solid construction using galvanized mild steel pipework. Add optional foot treadle for a secondary means of eyewash activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: Stainless SteelActivation: Shower: Hand lever, Eye/Face wash: Hand leverMaterial Specifications: Nozzle: Nylon 6, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: H2GS-2HFor cold climates with a minimum ambient operating temperature of -4 °F (-20 °C) or above—trace tape heating with polyethylene jacket and polyurethane foam insulation improve frost protection and strength Suitable for both Class 1 Division 2 hazardous areas, as well as non-hazardous areas. Includes a universal safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements This freeze protected and insulated drench shower is intended for use where there is a possibility of the water inside of the shower freezing due to extreme cold climates. Ideal for use where space is at a premium, this wall mounted emergency drench shower features a specially designed, high-performance quarter-turn ball valve made of 316L stainless steel to endure the harshest environments and site conditions. Low operating torque to open valve offers reliable, easy on/off operation when emergencies occur. Valve includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel shower pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. The shower includes a removable, self-draining overhead nozzle designed for high flow rates that meet or exceed ANSI standards. Made of durable nylon material, the nozzle offers optimal spray distribution for user protection and water conservation. Solid construction using stainless steel pipework for added corrosion resistance. Some assembly may be required. Electrical supply: 240V Single Phase, 60/50HzSPECIFICATIONSActivation: Pull HandleMaterial Specifications: Polyurethane foam insulation with a medium density polyethylene impact resistant outer casing, Nozzle: Nylon 6

Manufacturer: Hughes, Manufacturer Part Number: L18GS34GPowder coated stainless steel pipework, bowl, and rose ensures resistance to corrosive and flammable materials while also being easy to clean High-performance quarter-turn ball valves made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Includes a separate 16 x 12-in (407 x 305-mm) universal eye wash and safety shower sign for enhanced visibility, as well as an inspection record tag for recording test and service history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements Ideal for laboratories, schools and general light duty indoor use, this floor mounted emergency combination shower is suitable for use in applications that are not subject to the possibility of freezing or overheating. The system features specially designed valves with low operating torque offering reliable, easy on/off operation when emergencies occur. Valve includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel shower pull handle with nylon valve connection is easy to grip and activate for immediate water drenching from the shower rose that is designed for high flow rates. Open bowl eye/face wash with high, ANSI-compliant flow rate includes aerated diffusers with fine mesh strainers and an individual flow controller which provide a soft, scrubbing action to the eyes and face. Features twin spray nozzles with dust covers that pop-off when eye wash is activated via the push plate. Easy-to-reach flow regulator valve adjusts to suit the severity of the accident. Highly visible red push plate with universal hand and eye wash sign for simple activation. Add optional foot treadle for a secondary means of eyewash activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: Powder-Coated Stainless SteelActivation: Shower: Pull Handle, Eye/Face wash: Push PlateMaterial Specifications: Rose: Powder coated stainless steel, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: H2GS-1HFor cold climates with a minimum ambient operating temperature of -4 °F (-20 °C) or above—trace tape heating with polyethylene jacket and polyurethane foam insulation improve frost protection and strength Suitable for both Class 1 Division 2 hazardous areas, as well as non-hazardous areas. Includes a universal safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements This freeze protected and insulated drench shower is intended for use where there is a possibility of the water inside of the shower freezing due to extreme cold climates. Ideal for use where space is at a premium, this wall mounted emergency drench shower features a specially designed, high-performance quarter-turn ball valve made of 316L stainless steel to endure the harshest environments and site conditions. Low operating torque to open valve offers reliable, easy on/off operation when emergencies occur. Valve includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel shower pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. The shower includes a removable, self-draining overhead nozzle designed for high flow rates that meet or exceed ANSI standards. Made of durable nylon material, the nozzle offers optimal spray distribution for user protection and water conservation. Solid construction using stainless steel pipework for added corrosion resistance. Some assembly may be required. Electrical supply: 120V Single Phase, 60/50HzSPECIFICATIONSActivation: Pull HandleMaterial Specifications: Polyurethane foam insulation with a medium density polyethylene impact resistant outer casing, Nozzle: Nylon 6

Manufacturer: Hughes, Manufacturer Part Number: 18GS85GRemovable, self-draining nozzle constructed from a durable nylon material High-performance quarter-turn ball valves made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Twin aerated diffusers with fine mesh strainers and an individual flow controller provide a soft, scrubbing action to the eyes and face Includes a universal eye wash and safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements Be prepared to respond to accidents with this all-in-one floor mounted combination safety shower with top water inlet that provides initial on-site treatment to eye/face or full body exposure to hazards. Suitable for use in applications that are not subject to the possibility of freezing or overheating. The system features a specially designed valve that includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. Designed for high flow rates that meet or exceed ANSI standards, the nozzle offers optimal spray distribution for user protection. Unlike shower rose designs, this compact nozzle reduces the potential for insect nesting and eliminates high replacement costs associated with cracked or dented plastic spray heads. Open stainless steel bowl eye/face wash with high, ANSI-compliant flow rate features twin spray nozzles with dust covers that pop-off when eye wash is activated via the highly visible push plate. Easy-to-reach flow regulator valve adjusts to suit the severity of the accident. Solid construction using stainless steel pipework for added corrosion resistance. Add optional foot treadle for a secondary means of eyewash activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: Stainless SteelActivation: Shower: Pull Handle, Eye/Face wash: Push PlateMaterial Specifications: Nozzle: Nylon 6, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: L33GS34GPowder coated stainless steel pipework, bowl, and rose ensures resistance to corrosive and flammable materials while also being easy to clean High-performance quarter-turn ball valves made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Includes a separate 16 x 12-in (407 x 305-mm) universal eye wash and safety shower sign for enhanced visibility, as well as an inspection record tag for recording test and service history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements Ideal for laboratories, schools and general light duty indoor use, this wall mounted emergency combination shower is suitable for use in applications that are not subject to the possibility of freezing or overheating. The system features specially designed valves with low operating torque offering reliable, easy on/off operation when emergencies occur. Valve includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel shower pull handle with nylon valve connection is easy to grip and activate for immediate water drenching from the shower rose that is designed for high flow rates. Open bowl eye/face wash with high, ANSI-compliant flow rate includes aerated diffusers with fine mesh strainers and an individual flow controller which provide a soft, scrubbing action to the eyes and face. Features twin spray nozzles with dust covers that pop-off when eye wash is activated via the push plate. Easy-to-reach flow regulator valve adjusts to suit the severity of the accident. Highly visible red push plate with universal hand and eye wash sign for simple activation. Add optional foot treadle for a secondary means of eyewash activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: Powder-Coated Stainless SteelActivation: Shower: Pull Handle, Eye/Face wash: Push PlateMaterial Specifications: Rose: Powder coated stainless steel, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: 18G45GTCovered bowl ensures that the eyewash nozzles and bowl remain clean and free from contamination at all times—no dust covers needed Twin aerated diffusers with fine mesh strainers and an individual flow controller provide a soft, scrubbing action to the eyes and face Removable, self-draining nozzle constructed from a durable nylon material High-performance quarter-turn ball valve made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Includes a universal eye wash and safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements Be prepared to respond to accidents with this all-in-one floor mounted combination safety shower with top water inlet that provides initial on-site treatment to eye/face or full body exposure to hazards. Suitable for use in applications that are not subject to the possibility of freezing or overheating. The system features a specially designed valve that includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel pull handle with nylon valve connection is easy to grip and activate for immediate water drenching. Designed for high flow rates that meet or exceed ANSI standards, the nozzle offers optimal spray distribution for user protection. Unlike shower rose designs, this compact nozzle reduces the potential for insect nesting and eliminates high replacement costs associated with cracked or dented plastic spray heads. Made of durable, corrosion-resistant acrylic capped ABS, the eye/face wash with high, ANSI-compliant flow rate features an integral lid connected to the water valve for automatic operation—activate by simply pulling down the lid. Easy-to-reach flow regulator valve positioned on the side of the bowl adjusts to suit the severity of the accident. Solid construction using galvanized mild steel pipework. Add optional foot treadle for a secondary means of eye wash activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: Acrylic-Capped ABS PlasticActivation: Shower: Pull Handle, Eye/Face wash: Pull Lid ForwardMaterial Specifications: Nozzle: Nylon 6, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.