Decon

Manufacturer: Hughes, Manufacturer Part Number: SD31K45G-PUMPIncorporates eight PVC spray nozzles to facilitate a high flow rate decontamination process Integral drain sump and strip screens fitted to entrance reduce the risk of surplus contaminated water outside of the cubicle area ANSI compliant eye/face wash with integral, durable acrylic capped ABS lid protects against dust and debris—activate by simply pulling down the cover Submersible pump in cubicle sump prevents overflow by pumping waste water to a drain Designed for locations where space is at a premium or the emergency safety shower needs to be enclosed, this multi-nozzle decontamination cubicle shower helps prevent overspray and is activated by foot panel upon entry. The cubicle shower has a stainless steel hollow section frame enclosed in GRP sheeting with stainless steel pipes for corrosion resistance and extended life. The exterior sheeting includes universal pictogram signs and green and white safety stripes. Sump pump incorporates an integral float switch, which provides automatic pump control in the form of a low level cut out to prevent the risk of running dry—120V, 60 Hz suitable for general purpose areas. Mounted on the exterior side of the cubicle for maximum shower effectiveness, the eye/face wash with high, ANSI-compliant flow rate includes aerated diffusers with fine mesh strainers and an individual flow controller which provide a soft, scrubbing action to the eyes and face. Covered bowl also ensures that the eyewash nozzles and bowl remain clean and free from contamination at all times—no dust covers needed. Easy-to-reach flow regulator valve positioned on side of bowl adjusts to suit the severity of the accident. The system features specially designed, high-performance quarter-turn ball valves made of 316L stainless steel to endure the harshest environments and site conditions. Low operating torque to open valve offers reliable, easy on/off operation when emergencies occur. Valve includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Includes an inspection record tag for recording test and service history.SPECIFICATIONSEye/Face Wash Bowl Material: Acrylic-Capped ABS PlasticActivation: Shower: Foot Panel Activated, Eye/Face wash: Pull Lid ForwardMaterial Specifications: Stainless Steel Frame with GRP Paneling, Nozzles: PVC

Manufacturer: Hughes, Manufacturer Part Number: TMVEFRedundant thermostatic elements provide tepid water in the event of a thermostatic failure Positive hot water shut-off eliminates the delivery of scalding water to equipment Integral cold water bypass ensures reliable cold water delivery if hot water supply is interrupted These valves blend hot and cold supply water to deliver tepid water (85 °F / 29 °C) to emergency equipment, and with a range of 2 to 7 GPM at 30 PSI (7.5 to 26.5 LPM at 2 BAR G), this low-capacity valve is sufficient for a single eyewash. Best specified for systems requiring bypass rates of 1 to 7 GPM (3.7 to 26.5 LPM). The valve can be installed into existing emergency eyewash application and is easily tested and repaired. Helps meet ANSI Z358.1-2014 and accurately controls outlet temperature in accordance with ASSE 1071 standards. ASSE 1071 approved and lead free certified.SPECIFICATIONSMaterial Specifications: Bronze Body

Manufacturer: Bradley, Manufacturer Part Number: S19-2000Emergency eye wash and shower mixing valves blend hot and cold water to a comfortable flushing temperature. ANSI standards require tepid water to assure that eye wash and shower users are not subjected to scalding or freezing water temperatures. Bradley thermostatic mixing valves are specifically designed for emergency eye wash, drench shower or combination drench shower/eye wash applications. Each valve meets ANSI Z358.1–1998 requirements. 8 gallons per minute thermostatic mixing valve will accommodate up to three eye washes or one eye/face wash. Accurate temperature control to within +/– 3°F through use of reliable liquid–filled thermostat for peace of mind Positive shut–off of hot supply if cold water supply fails – to prevent scalding Cold water bypass feature ensures emergency shower operation in the event of a loss of hot water supply Dial thermometer provides quick monitoring of output temperature Universal mounting capability makes installation a snap Factory assembled and 100% tested to guarantee performance SPECIFICATIONS10 lbs.1 valve8 GPM @ 30 PSI

Manufacturer: Bradley, Manufacturer Part Number: S19-2100Emergency eye wash and shower mixing valves blend hot and cold water to a comfortable flushing temperature. ANSI standards require tepid water to assure that eye wash and shower users are not subjected to scalding or freezing water temperatures. Bradley thermostatic mixing valves are specifically designed for emergency eye wash, drench shower or combination drench shower/eye wash applications. Each valve meets ANSI Z358.1–1998 requirements. 36 gallons per minute thermostatic mixing valve will accommodate one combination shower with eye wash or multiple eye washes. Accurate temperature control to within +/– 3°F through use of reliable liquid–filled thermostat for peace of mind Positive shut–off of hot supply if cold water supply fails – to prevent scalding Cold water bypass feature ensures emergency shower operation in the event of a loss of hot water supply Dial thermometer provides quick monitoring of output temperature Universal mounting capability makes installation a snap Factory assembled and 100% tested to guarantee performance SPECIFICATIONS20 lbs.1 valve36 GPM @ 30 PSI

Manufacturer: Bradley, Manufacturer Part Number: S19-2200Emergency eye wash and shower mixing valves blend hot and cold water to a comfortable flushing temperature. ANSI standards require tepid water to assure that eye wash and shower users are not subjected to scalding or freezing water temperatures. Bradley thermostatic mixing valves are specifically designed for emergency eye wash, drench shower or combination drench shower/eye wash applications. Each valve meets ANSI Z358.1–1998 requirements. 67 gallons per minute thermostatic mixing valve will accommodate up to two drench showers, combination showers with eye washes or multiple eye washes. Accurate temperature control to within +/– 3°F through use of reliable liquid–filled thermostat for peace of mind Positive shut–off of hot supply if cold water supply fails – to prevent scalding Cold water bypass feature ensures emergency shower operation in the event of a loss of hot water supply Dial thermometer provides quick monitoring of output temperature Universal mounting capability makes installation a snap Factory assembled and 100% tested to guarantee performance SPECIFICATIONS30 lbs.1 valve67 GPM @ 30 PSI

Manufacturer: Keltech, Manufacturer Part Number: CLE253/600DThe Keltech tankless CLE series emergency eyewash heaters are the perfect solution for workers at risk from chemical injury. Custom designed to meet your needs, Keltech emergency eyewash heaters perform when needed and quickly provide an unlimited supply of warm water. Keltech's water heating systems reach the required ANSI Z358.1 2004 standards for tepid water temperatures (60°F to 85°F) in as little as 20 to 30 seconds. With a Keltech tankless CLE emergency eyewash water heater, you will be able to provide injured employees with a consistent flow of tepid water, up to 10 gallons per minute for 15 minutes. Keltech's CLE series emergency eyewash heaters are built upon the proven technology found in our large and light industrial water heaters. The CLE series heaters activate at .75 GPM and can handle water flow up to 10 GPM. Keltech tankless emergency eyewash heating solutions range in size and capacity from 18kW to 25kW. Standard voltage is 480V 3–phase delta or 600V 3–phase delta at various amperages. Precision engineered for optimal performance, Keltech emergency eyewash water heating solutions are built to last and feature quality control systems and premium materials like copper and brass to meet your demanding specs and to increase the life of the heater. KELTECH CLE SERIES EMERGENCY EYEWASH HEATERS FEATURES AND BENEFITS: Meet the New ANSI Z358.1 2004 Standards Keltech's emergency eyewash heaters quickly reach the required ANSI standards for tepid water temperatures (60°F to 85°F) in as little as 20 to 30 seconds and provide injured employees with a consistent flow of tepid water — up to 10 GPM — for 15 minutes. Redundant Control and Safety Features Every CLE emergency eyewash heater that Keltech custom designs includes a patented temperature control system and multiple safety features like internal fusing, digital temperature control, Incoloy 800 sheathed heating elements to eliminate the "tingle" effect, an externally mounted emergency stop button, and splash proof NEMA 4 water tight enclosures. Safety only circuits monitor for over temperature conditions and ensure individual chambers do not exceed ANSI standards for tepid water temperature. The CLE series is ETL/cETL approved and conforms to UL and CSA standards. Minimal Pressure Drop Means No Latent Heat Issues The large internal passageways engineered into every Keltech's CLE series emergency eyewash heater minimize pressure drop. If the water flow changes drastically, you will not have to be concerned with scalding. Our patented system guarantees there will be no large temperature swing. Quality Materials and Components Provide Reliable Performance and Minimal Maintenance All Keltech tankless water heating solutions are built to last and feature rugged industrial components constructed from high quality copper and brass tested to 300 PSI. Our heating elements are Incoloy sheathed to provide longer life. Maintenance is minimal, falling within the normal ANSI requirements. One of the best features of a Keltech tankless water heating system is never having to open its enclosure door. Easy to Install Anywhere CLE emergency eyewash heaters come standard with NEMA enclosures and are easy to install: Just add water and power. All you need is access to one electrical connection and a cold water line. In fact, Keltech CLE series emergency eyewash heaters are wired to 480 Delta and 600 Delta — they do not require a neutral. This flexibility allows the tankless emergency eyewash heaters and systems to be mounted near your existing shower and/or emergency eyewash facilities. NEMA 4 enclosures are constructed for either indoor or outdoor use and provide a measure of protection for the emergency eyewash heater from the elements. Save Energy from Day One The Keltech tankless emergency eyewash heaters and systems are energy efficient and minimize utility cost. They perform on–demand requiring power and water only when needed. There is no need to heat a 300 gallon boiler 24 hours a day, 365 days a year. There's also no need for expensive re–circulation loops. That saves your organization money and keeps the safety of your employees and technicians first. Units are applicable eyewash applications only and are not required for a combination shower unit Built with redundant safeties and anti–scald feature to meet ANSI tepid water requirements Complies with ANSI Z358.1 standards Available in 480V 3–phase delta and 600V 3–phase delta configurations With proper sizing, one heater can supply multiple eyewash stations Can be supplied with an eyewash station if specified CONTACT US FOR MORE INFORMATION AND OPTIONSSPECIFICATIONS170 lbs.1 unit0.75 - 10 GPM Flow Rate

Manufacturer: Keltech, Manufacturer Part Number: SN1443/480DTEPID WATER SOLUTIONS Keltech SN series of safety shower systems provide portability that anti–scald valves and fixed plumbing cannot match. Our tankless water heaters can be mounted almost anywhere. Just add water and power. The Keltech SN series shower heater can be paired with any high quality commercial safety shower apparatus. Keltech tankless safety shower heaters can be mounted near your existing shower and/or eyewash facilities. SIZING RANGES TO MEET YOUR SPECS Keltech tankless safety shower heating solutions range in size and capacity from 36kW to 144kW. Standard voltage is 480V 3–phase delta or 600V 3–phase delta at various amperages with water flow up to 40 GPM with activation beginning as low as 1.5 GPM. PRECISION ENGINEERED FOR OPTIMAL PERFORMANCE Keltech safety shower water heating solutions are built to last and feature quality control systems and premium materials like copper and brass to meet your demanding specs and to increase the life of the heater. KELTECH SN SERIES SAFETY SHOWER HEATERS AND SYSTEMS FEATURES AND BENEFITS: Meet the New ANSI Z358.1 2004 Standards Keltech's safety shower heaters quickly reach the required ANSI standards for tepid water temperatures in as little as 20 to 30 seconds. Keltech tankless water heaters provide injured employees with a constant flow of tepid water at 20 to 30 gallons per minute for an ANSI mandated 15 minutes — or longer if needed. Unlike tanks, Keltech tankless water heaters can provide continuous tepid water for multiple incidents with no recovery time. Redundant Control and Safety Features Every SN safety shower heater that Keltech custom designs includes a patented temperature control system and multiple safety features like internal fusing, digital temperature control, Incoloy 800 sheathed heating elements to eliminate the "tingle" effect, an externally mounted emergency stop button, and NEMA 4 water tight enclosures. Safety only circuits monitor for over temperature conditions and ensure individual chambers do not exceed ANSI standards for tepid water temperature. The SN series is ETL/cETL approved and conforms to UL and CSA standards. Minimal Pressure Drop Means No Latent Heat Issues The large internal passageways engineered into every Keltech's SN series safety shower heater minimize pressure drop. If the water flow changes drastically, you will not have to be concerned with scalding. Our patented system guarantees there will be no large temperature swing. Quality Materials and Components Provide Reliable Performance and Minimal Maintenance All Keltech tankless water heating solutions are built to last and feature rugged industrial components constructed from high quality copper and brass tested to 300 PSI. Our heating elements are Incoloy sheathed to provide longer life. Maintenance is minimal, falling within the normal ANSI requirements. One of the best features of a Keltech tankless water heating system is never having to open its enclosure door. Easy to Install SN safety shower heaters come standard with NEMA enclosures and are easy to install: Just add water and power. All you need is access to one electrical connection and a cold water line. In fact, Keltech SN series safety shower heaters are wired to 480 Delta and 600 Delta — they do not require a neutral. This flexibility allows the tankless safety shower heaters and systems to be mounted near your existing shower and/or emergency eyewash facilities. Keltech's safety shower heaters are also compact and do not require large floor space: the SN series can be wall mounted almost anywhere in the vertical position. Keltech's freestanding shower heating units include a sturdy floor stand kit. Save Energy from Day One The Keltech tankless safety shower heaters and systems are energy efficient and minimize utility cost. They perform on–demand requiring power and water only when needed. There is no need to heat a 300 gallon boiler 24 hours a day, 365 days a year. There's also no need for expensive re–circulation loops. That saves your organization money and keeps the safety of your employees and technicians first. Patented safeties to ensure water temperatures remain within the ANSI tepid water standards Anti–scald feature standard Capable of supplying tepid water to combination shower and eyewash heater without overheating No mixing valves required SN series can be fitted with a shower or a complete shower skid system Each skid system is a complete package designed to meet your temperature range requirements and safety shower criteria With proper sizing, one heater can be used to supply multiple showers Many standard features are available but can also be customized for your site location's requirements Available in 400V 3–phase delta and 600V 3–phase delta configurations Complies with ANSI Z358.1 standards CONTACT US FOR MORE INFORMATION AND OPTIONSSPECIFICATIONS560 lbs.1 unit1.5 - 40 GPM Flow Rate

Manufacturer: Keltech, Manufacturer Part Number: CLE253/480DThe Keltech tankless CLE series emergency eyewash heaters are the perfect solution for workers at risk from chemical injury. Custom designed to meet your needs, Keltech emergency eyewash heaters perform when needed and quickly provide an unlimited supply of warm water. Keltech's water heating systems reach the required ANSI Z358.1 2004 standards for tepid water temperatures (60°F to 85°F) in as little as 20 to 30 seconds. With a Keltech tankless CLE emergency eyewash water heater, you will be able to provide injured employees with a consistent flow of tepid water, up to 10 gallons per minute for 15 minutes. Keltech's CLE series emergency eyewash heaters are built upon the proven technology found in our large and light industrial water heaters. The CLE series heaters activate at .75 GPM and can handle water flow up to 10 GPM. Keltech tankless emergency eyewash heating solutions range in size and capacity from 18kW to 25kW. Standard voltage is 480V 3–phase delta or 600V 3–phase delta at various amperages. Precision engineered for optimal performance, Keltech emergency eyewash water heating solutions are built to last and feature quality control systems and premium materials like copper and brass to meet your demanding specs and to increase the life of the heater. KELTECH CLE SERIES EMERGENCY EYEWASH HEATERS FEATURES AND BENEFITS: Meet the New ANSI Z358.1 2004 Standards Keltech's emergency eyewash heaters quickly reach the required ANSI standards for tepid water temperatures (60°F to 85°F) in as little as 20 to 30 seconds and provide injured employees with a consistent flow of tepid water — up to 10 GPM — for 15 minutes. Redundant Control and Safety Features Every CLE emergency eyewash heater that Keltech custom designs includes a patented temperature control system and multiple safety features like internal fusing, digital temperature control, Incoloy 800 sheathed heating elements to eliminate the "tingle" effect, an externally mounted emergency stop button, and splash proof NEMA 4 water tight enclosures. Safety only circuits monitor for over temperature conditions and ensure individual chambers do not exceed ANSI standards for tepid water temperature. The CLE series is ETL/cETL approved and conforms to UL and CSA standards. Minimal Pressure Drop Means No Latent Heat Issues The large internal passageways engineered into every Keltech's CLE series emergency eyewash heater minimize pressure drop. If the water flow changes drastically, you will not have to be concerned with scalding. Our patented system guarantees there will be no large temperature swing. Quality Materials and Components Provide Reliable Performance and Minimal Maintenance All Keltech tankless water heating solutions are built to last and feature rugged industrial components constructed from high quality copper and brass tested to 300 PSI. Our heating elements are Incoloy sheathed to provide longer life. Maintenance is minimal, falling within the normal ANSI requirements. One of the best features of a Keltech tankless water heating system is never having to open its enclosure door. Easy to Install Anywhere CLE emergency eyewash heaters come standard with NEMA enclosures and are easy to install: Just add water and power. All you need is access to one electrical connection and a cold water line. In fact, Keltech CLE series emergency eyewash heaters are wired to 480 Delta and 600 Delta — they do not require a neutral. This flexibility allows the tankless emergency eyewash heaters and systems to be mounted near your existing shower and/or emergency eyewash facilities. NEMA 4 enclosures are constructed for either indoor or outdoor use and provide a measure of protection for the emergency eyewash heater from the elements. Save Energy from Day One The Keltech tankless emergency eyewash heaters and systems are energy efficient and minimize utility cost. They perform on–demand requiring power and water only when needed. There is no need to heat a 300 gallon boiler 24 hours a day, 365 days a year. There's also no need for expensive re–circulation loops. That saves your organization money and keeps the safety of your employees and technicians first. Units are applicable eyewash applications only and are not required for a combination shower unit Built with redundant safeties and anti–scald feature to meet ANSI tepid water requirements Complies with ANSI Z358.1 standards Available in 480V 3–phase delta and 600V 3–phase delta configurations With proper sizing, one heater can supply multiple eyewash stations Can be supplied with an eyewash station if specified CONTACT US FOR MORE INFORMATION AND OPTIONSSPECIFICATIONS170 lbs.1 unit0.75 - 10 GPM Flow Rate

Manufacturer: Keltech, Manufacturer Part Number: CLE183/480DThe Keltech tankless CLE series emergency eyewash heaters are the perfect solution for workers at risk from chemical injury. Custom designed to meet your needs, Keltech emergency eyewash heaters perform when needed and quickly provide an unlimited supply of warm water. Keltech's water heating systems reach the required ANSI Z358.1 2004 standards for tepid water temperatures (60°F to 85°F) in as little as 20 to 30 seconds. With a Keltech tankless CLE emergency eyewash water heater, you will be able to provide injured employees with a consistent flow of tepid water, up to 10 gallons per minute for 15 minutes. Keltech's CLE series emergency eyewash heaters are built upon the proven technology found in our large and light industrial water heaters. The CLE series heaters activate at .75 GPM and can handle water flow up to 10 GPM. Keltech tankless emergency eyewash heating solutions range in size and capacity from 18kW to 25kW. Standard voltage is 480V 3–phase delta or 600V 3–phase delta at various amperages. Precision engineered for optimal performance, Keltech emergency eyewash water heating solutions are built to last and feature quality control systems and premium materials like copper and brass to meet your demanding specs and to increase the life of the heater. KELTECH CLE SERIES EMERGENCY EYEWASH HEATERS FEATURES AND BENEFITS: Meet the New ANSI Z358.1 2004 Standards Keltech's emergency eyewash heaters quickly reach the required ANSI standards for tepid water temperatures (60°F to 85°F) in as little as 20 to 30 seconds and provide injured employees with a consistent flow of tepid water — up to 10 GPM — for 15 minutes. Redundant Control and Safety Features Every CLE emergency eyewash heater that Keltech custom designs includes a patented temperature control system and multiple safety features like internal fusing, digital temperature control, Incoloy 800 sheathed heating elements to eliminate the "tingle" effect, an externally mounted emergency stop button, and splash proof NEMA 4 water tight enclosures. Safety only circuits monitor for over temperature conditions and ensure individual chambers do not exceed ANSI standards for tepid water temperature. The CLE series is ETL/cETL approved and conforms to UL and CSA standards. Minimal Pressure Drop Means No Latent Heat Issues The large internal passageways engineered into every Keltech's CLE series emergency eyewash heater minimize pressure drop. If the water flow changes drastically, you will not have to be concerned with scalding. Our patented system guarantees there will be no large temperature swing. Quality Materials and Components Provide Reliable Performance and Minimal Maintenance All Keltech tankless water heating solutions are built to last and feature rugged industrial components constructed from high quality copper and brass tested to 300 PSI. Our heating elements are Incoloy sheathed to provide longer life. Maintenance is minimal, falling within the normal ANSI requirements. One of the best features of a Keltech tankless water heating system is never having to open its enclosure door. Easy to Install Anywhere CLE emergency eyewash heaters come standard with NEMA enclosures and are easy to install: Just add water and power. All you need is access to one electrical connection and a cold water line. In fact, Keltech CLE series emergency eyewash heaters are wired to 480 Delta and 600 Delta — they do not require a neutral. This flexibility allows the tankless emergency eyewash heaters and systems to be mounted near your existing shower and/or emergency eyewash facilities. NEMA 4 enclosures are constructed for either indoor or outdoor use and provide a measure of protection for the emergency eyewash heater from the elements. Save Energy from Day One The Keltech tankless emergency eyewash heaters and systems are energy efficient and minimize utility cost. They perform on–demand requiring power and water only when needed. There is no need to heat a 300 gallon boiler 24 hours a day, 365 days a year. There's also no need for expensive re–circulation loops. That saves your organization money and keeps the safety of your employees and technicians first. Units are applicable eyewash applications only and are not required for a combination shower unit Built with redundant safeties and anti–scald feature to meet ANSI tepid water requirements Complies with ANSI Z358.1 standards Available in 480V 3–phase delta and 600V 3–phase delta configurations With proper sizing, one heater can supply multiple eyewash stations Can be supplied with an eyewash station if specified CONTACT US FOR MORE INFORMATION AND OPTIONSSPECIFICATIONS155 lbs.1 unit0.75 - 8 GPM Flow Rate

Manufacturer: Keltech, Manufacturer Part Number: CLE183/600DThe Keltech tankless CLE series emergency eyewash heaters are the perfect solution for workers at risk from chemical injury. Custom designed to meet your needs, Keltech emergency eyewash heaters perform when needed and quickly provide an unlimited supply of warm water. Keltech's water heating systems reach the required ANSI Z358.1 2004 standards for tepid water temperatures (60°F to 85°F) in as little as 20 to 30 seconds. With a Keltech tankless CLE emergency eyewash water heater, you will be able to provide injured employees with a consistent flow of tepid water, up to 10 gallons per minute for 15 minutes. Keltech's CLE series emergency eyewash heaters are built upon the proven technology found in our large and light industrial water heaters. The CLE series heaters activate at .75 GPM and can handle water flow up to 10 GPM. Keltech tankless emergency eyewash heating solutions range in size and capacity from 18kW to 25kW. Standard voltage is 480V 3–phase delta or 600V 3–phase delta at various amperages. Precision engineered for optimal performance, Keltech emergency eyewash water heating solutions are built to last and feature quality control systems and premium materials like copper and brass to meet your demanding specs and to increase the life of the heater. KELTECH CLE SERIES EMERGENCY EYEWASH HEATERS FEATURES AND BENEFITS: Meet the New ANSI Z358.1 2004 Standards Keltech's emergency eyewash heaters quickly reach the required ANSI standards for tepid water temperatures (60°F to 85°F) in as little as 20 to 30 seconds and provide injured employees with a consistent flow of tepid water — up to 10 GPM — for 15 minutes. Redundant Control and Safety Features Every CLE emergency eyewash heater that Keltech custom designs includes a patented temperature control system and multiple safety features like internal fusing, digital temperature control, Incoloy 800 sheathed heating elements to eliminate the "tingle" effect, an externally mounted emergency stop button, and splash proof NEMA 4 water tight enclosures. Safety only circuits monitor for over temperature conditions and ensure individual chambers do not exceed ANSI standards for tepid water temperature. The CLE series is ETL/cETL approved and conforms to UL and CSA standards. Minimal Pressure Drop Means No Latent Heat Issues The large internal passageways engineered into every Keltech's CLE series emergency eyewash heater minimize pressure drop. If the water flow changes drastically, you will not have to be concerned with scalding. Our patented system guarantees there will be no large temperature swing. Quality Materials and Components Provide Reliable Performance and Minimal Maintenance All Keltech tankless water heating solutions are built to last and feature rugged industrial components constructed from high quality copper and brass tested to 300 PSI. Our heating elements are Incoloy sheathed to provide longer life. Maintenance is minimal, falling within the normal ANSI requirements. One of the best features of a Keltech tankless water heating system is never having to open its enclosure door. Easy to Install Anywhere CLE emergency eyewash heaters come standard with NEMA enclosures and are easy to install: Just add water and power. All you need is access to one electrical connection and a cold water line. In fact, Keltech CLE series emergency eyewash heaters are wired to 480 Delta and 600 Delta — they do not require a neutral. This flexibility allows the tankless emergency eyewash heaters and systems to be mounted near your existing shower and/or emergency eyewash facilities. NEMA 4 enclosures are constructed for either indoor or outdoor use and provide a measure of protection for the emergency eyewash heater from the elements. Save Energy from Day One The Keltech tankless emergency eyewash heaters and systems are energy efficient and minimize utility cost. They perform on–demand requiring power and water only when needed. There is no need to heat a 300 gallon boiler 24 hours a day, 365 days a year. There's also no need for expensive re–circulation loops. That saves your organization money and keeps the safety of your employees and technicians first. Units are applicable eyewash applications only and are not required for a combination shower unit Built with redundant safeties and anti–scald feature to meet ANSI tepid water requirements Complies with ANSI Z358.1 standards Available in 480V 3–phase delta and 600V 3–phase delta configurations With proper sizing, one heater can supply multiple eyewash stations Can be supplied with an eyewash station if specified CONTACT US FOR MORE INFORMATION AND OPTIONSSPECIFICATIONS155 lbs.1 unit0.75 - 8 GPM Flow Rate

Manufacturer: Keltech, Manufacturer Part Number: SN1263/480DTEPID WATER SOLUTIONS Keltech SN series of safety shower systems provide portability that anti–scald valves and fixed plumbing cannot match. Our tankless water heaters can be mounted almost anywhere. Just add water and power. The Keltech SN series shower heater can be paired with any high quality commercial safety shower apparatus. Keltech tankless safety shower heaters can be mounted near your existing shower and/or eyewash facilities. SIZING RANGES TO MEET YOUR SPECS Keltech tankless safety shower heating solutions range in size and capacity from 36kW to 144kW. Standard voltage is 480V 3–phase delta or 600V 3–phase delta at various amperages with water flow up to 40 GPM with activation beginning as low as 1.5 GPM. PRECISION ENGINEERED FOR OPTIMAL PERFORMANCE Keltech safety shower water heating solutions are built to last and feature quality control systems and premium materials like copper and brass to meet your demanding specs and to increase the life of the heater. KELTECH SN SERIES SAFETY SHOWER HEATERS AND SYSTEMS FEATURES AND BENEFITS: Meet the New ANSI Z358.1 2004 Standards Keltech's safety shower heaters quickly reach the required ANSI standards for tepid water temperatures in as little as 20 to 30 seconds. Keltech tankless water heaters provide injured employees with a constant flow of tepid water at 20 to 30 gallons per minute for an ANSI mandated 15 minutes — or longer if needed. Unlike tanks, Keltech tankless water heaters can provide continuous tepid water for multiple incidents with no recovery time. Redundant Control and Safety Features Every SN safety shower heater that Keltech custom designs includes a patented temperature control system and multiple safety features like internal fusing, digital temperature control, Incoloy 800 sheathed heating elements to eliminate the "tingle" effect, an externally mounted emergency stop button, and NEMA 4 water tight enclosures. Safety only circuits monitor for over temperature conditions and ensure individual chambers do not exceed ANSI standards for tepid water temperature. The SN series is ETL/cETL approved and conforms to UL and CSA standards. Minimal Pressure Drop Means No Latent Heat Issues The large internal passageways engineered into every Keltech's SN series safety shower heater minimize pressure drop. If the water flow changes drastically, you will not have to be concerned with scalding. Our patented system guarantees there will be no large temperature swing. Quality Materials and Components Provide Reliable Performance and Minimal Maintenance All Keltech tankless water heating solutions are built to last and feature rugged industrial components constructed from high quality copper and brass tested to 300 PSI. Our heating elements are Incoloy sheathed to provide longer life. Maintenance is minimal, falling within the normal ANSI requirements. One of the best features of a Keltech tankless water heating system is never having to open its enclosure door. Easy to Install SN safety shower heaters come standard with NEMA enclosures and are easy to install: Just add water and power. All you need is access to one electrical connection and a cold water line. In fact, Keltech SN series safety shower heaters are wired to 480 Delta and 600 Delta — they do not require a neutral. This flexibility allows the tankless safety shower heaters and systems to be mounted near your existing shower and/or emergency eyewash facilities. Keltech's safety shower heaters are also compact and do not require large floor space: the SN series can be wall mounted almost anywhere in the vertical position. Keltech's freestanding shower heating units include a sturdy floor stand kit. Save Energy from Day One The Keltech tankless safety shower heaters and systems are energy efficient and minimize utility cost. They perform on–demand requiring power and water only when needed. There is no need to heat a 300 gallon boiler 24 hours a day, 365 days a year. There's also no need for expensive re–circulation loops. That saves your organization money and keeps the safety of your employees and technicians first. Patented safeties to ensure water temperatures remain within the ANSI tepid water standards Anti–scald feature standard Capable of supplying tepid water to combination shower and eyewash heater without overheating No mixing valves required SN series can be fitted with a shower or a complete shower skid system Each skid system is a complete package designed to meet your temperature range requirements and safety shower criteria With proper sizing, one heater can be used to supply multiple showers Many standard features are available but can also be customized for your site location's requirements Available in 400V 3–phase delta and 600V 3–phase delta configurations Complies with ANSI Z358.1 standards CONTACT US FOR MORE INFORMATION AND OPTIONSSPECIFICATIONS550 lbs.1 unit1.5 - 40 GPM Flow Rate

Manufacturer: Keltech, Manufacturer Part Number: SN1443/600DTEPID WATER SOLUTIONS Keltech SN series of safety shower systems provide portability that anti–scald valves and fixed plumbing cannot match. Our tankless water heaters can be mounted almost anywhere. Just add water and power. The Keltech SN series shower heater can be paired with any high quality commercial safety shower apparatus. Keltech tankless safety shower heaters can be mounted near your existing shower and/or eyewash facilities. SIZING RANGES TO MEET YOUR SPECS Keltech tankless safety shower heating solutions range in size and capacity from 36kW to 144kW. Standard voltage is 480V 3–phase delta or 600V 3–phase delta at various amperages with water flow up to 40 GPM with activation beginning as low as 1.5 GPM. PRECISION ENGINEERED FOR OPTIMAL PERFORMANCE Keltech safety shower water heating solutions are built to last and feature quality control systems and premium materials like copper and brass to meet your demanding specs and to increase the life of the heater. KELTECH SN SERIES SAFETY SHOWER HEATERS AND SYSTEMS FEATURES AND BENEFITS: Meet the New ANSI Z358.1 2004 Standards Keltech's safety shower heaters quickly reach the required ANSI standards for tepid water temperatures in as little as 20 to 30 seconds. Keltech tankless water heaters provide injured employees with a constant flow of tepid water at 20 to 30 gallons per minute for an ANSI mandated 15 minutes — or longer if needed. Unlike tanks, Keltech tankless water heaters can provide continuous tepid water for multiple incidents with no recovery time. Redundant Control and Safety Features Every SN safety shower heater that Keltech custom designs includes a patented temperature control system and multiple safety features like internal fusing, digital temperature control, Incoloy 800 sheathed heating elements to eliminate the "tingle" effect, an externally mounted emergency stop button, and NEMA 4 water tight enclosures. Safety only circuits monitor for over temperature conditions and ensure individual chambers do not exceed ANSI standards for tepid water temperature. The SN series is ETL/cETL approved and conforms to UL and CSA standards. Minimal Pressure Drop Means No Latent Heat Issues The large internal passageways engineered into every Keltech's SN series safety shower heater minimize pressure drop. If the water flow changes drastically, you will not have to be concerned with scalding. Our patented system guarantees there will be no large temperature swing. Quality Materials and Components Provide Reliable Performance and Minimal Maintenance All Keltech tankless water heating solutions are built to last and feature rugged industrial components constructed from high quality copper and brass tested to 300 PSI. Our heating elements are Incoloy sheathed to provide longer life. Maintenance is minimal, falling within the normal ANSI requirements. One of the best features of a Keltech tankless water heating system is never having to open its enclosure door. Easy to Install SN safety shower heaters come standard with NEMA enclosures and are easy to install: Just add water and power. All you need is access to one electrical connection and a cold water line. In fact, Keltech SN series safety shower heaters are wired to 480 Delta and 600 Delta — they do not require a neutral. This flexibility allows the tankless safety shower heaters and systems to be mounted near your existing shower and/or emergency eyewash facilities. Keltech's safety shower heaters are also compact and do not require large floor space: the SN series can be wall mounted almost anywhere in the vertical position. Keltech's freestanding shower heating units include a sturdy floor stand kit. Save Energy from Day One The Keltech tankless safety shower heaters and systems are energy efficient and minimize utility cost. They perform on–demand requiring power and water only when needed. There is no need to heat a 300 gallon boiler 24 hours a day, 365 days a year. There's also no need for expensive re–circulation loops. That saves your organization money and keeps the safety of your employees and technicians first. Patented safeties to ensure water temperatures remain within the ANSI tepid water standards Anti–scald feature standard Capable of supplying tepid water to combination shower and eyewash heater without overheating No mixing valves required SN series can be fitted with a shower or a complete shower skid system Each skid system is a complete package designed to meet your temperature range requirements and safety shower criteria With proper sizing, one heater can be used to supply multiple showers Many standard features are available but can also be customized for your site location's requirements Available in 400V 3–phase delta and 600V 3–phase delta configurations Complies with ANSI Z358.1 standards CONTACT US FOR MORE INFORMATION AND OPTIONSSPECIFICATIONS560 lbs.1 unit1.5 - 40 GPM Flow Rate

Manufacturer: Keltech, Manufacturer Part Number: SN1263/600DTEPID WATER SOLUTIONS Keltech SN series of safety shower systems provide portability that anti–scald valves and fixed plumbing cannot match. Our tankless water heaters can be mounted almost anywhere. Just add water and power. The Keltech SN series shower heater can be paired with any high quality commercial safety shower apparatus. Keltech tankless safety shower heaters can be mounted near your existing shower and/or eyewash facilities. SIZING RANGES TO MEET YOUR SPECS Keltech tankless safety shower heating solutions range in size and capacity from 36kW to 144kW. Standard voltage is 480V 3–phase delta or 600V 3–phase delta at various amperages with water flow up to 40 GPM with activation beginning as low as 1.5 GPM. PRECISION ENGINEERED FOR OPTIMAL PERFORMANCE Keltech safety shower water heating solutions are built to last and feature quality control systems and premium materials like copper and brass to meet your demanding specs and to increase the life of the heater. KELTECH SN SERIES SAFETY SHOWER HEATERS AND SYSTEMS FEATURES AND BENEFITS: Meet the New ANSI Z358.1 2004 Standards Keltech's safety shower heaters quickly reach the required ANSI standards for tepid water temperatures in as little as 20 to 30 seconds. Keltech tankless water heaters provide injured employees with a constant flow of tepid water at 20 to 30 gallons per minute for an ANSI mandated 15 minutes — or longer if needed. Unlike tanks, Keltech tankless water heaters can provide continuous tepid water for multiple incidents with no recovery time. Redundant Control and Safety Features Every SN safety shower heater that Keltech custom designs includes a patented temperature control system and multiple safety features like internal fusing, digital temperature control, Incoloy 800 sheathed heating elements to eliminate the "tingle" effect, an externally mounted emergency stop button, and NEMA 4 water tight enclosures. Safety only circuits monitor for over temperature conditions and ensure individual chambers do not exceed ANSI standards for tepid water temperature. The SN series is ETL/cETL approved and conforms to UL and CSA standards. Minimal Pressure Drop Means No Latent Heat Issues The large internal passageways engineered into every Keltech's SN series safety shower heater minimize pressure drop. If the water flow changes drastically, you will not have to be concerned with scalding. Our patented system guarantees there will be no large temperature swing. Quality Materials and Components Provide Reliable Performance and Minimal Maintenance All Keltech tankless water heating solutions are built to last and feature rugged industrial components constructed from high quality copper and brass tested to 300 PSI. Our heating elements are Incoloy sheathed to provide longer life. Maintenance is minimal, falling within the normal ANSI requirements. One of the best features of a Keltech tankless water heating system is never having to open its enclosure door. Easy to Install SN safety shower heaters come standard with NEMA enclosures and are easy to install: Just add water and power. All you need is access to one electrical connection and a cold water line. In fact, Keltech SN series safety shower heaters are wired to 480 Delta and 600 Delta — they do not require a neutral. This flexibility allows the tankless safety shower heaters and systems to be mounted near your existing shower and/or emergency eyewash facilities. Keltech's safety shower heaters are also compact and do not require large floor space: the SN series can be wall mounted almost anywhere in the vertical position. Keltech's freestanding shower heating units include a sturdy floor stand kit. Save Energy from Day One The Keltech tankless safety shower heaters and systems are energy efficient and minimize utility cost. They perform on–demand requiring power and water only when needed. There is no need to heat a 300 gallon boiler 24 hours a day, 365 days a year. There's also no need for expensive re–circulation loops. That saves your organization money and keeps the safety of your employees and technicians first. Patented safeties to ensure water temperatures remain within the ANSI tepid water standards Anti–scald feature standard Capable of supplying tepid water to combination shower and eyewash heater without overheating No mixing valves required SN series can be fitted with a shower or a complete shower skid system Each skid system is a complete package designed to meet your temperature range requirements and safety shower criteria With proper sizing, one heater can be used to supply multiple showers Many standard features are available but can also be customized for your site location's requirements Available in 400V 3–phase delta and 600V 3–phase delta configurations Complies with ANSI Z358.1 standards CONTACT US FOR MORE INFORMATION AND OPTIONSSPECIFICATIONS550 lbs.1 unit1.5 - 40 GPM Flow Rate

Manufacturer: Keltech, Manufacturer Part Number: SN1083/480DTEPID WATER SOLUTIONS Keltech SN series of safety shower systems provide portability that anti–scald valves and fixed plumbing cannot match. Our tankless water heaters can be mounted almost anywhere. Just add water and power. The Keltech SN series shower heater can be paired with any high quality commercial safety shower apparatus. Keltech tankless safety shower heaters can be mounted near your existing shower and/or eyewash facilities. SIZING RANGES TO MEET YOUR SPECS Keltech tankless safety shower heating solutions range in size and capacity from 36kW to 144kW. Standard voltage is 480V 3–phase delta or 600V 3–phase delta at various amperages with water flow up to 40 GPM with activation beginning as low as 1.5 GPM. PRECISION ENGINEERED FOR OPTIMAL PERFORMANCE Keltech safety shower water heating solutions are built to last and feature quality control systems and premium materials like copper and brass to meet your demanding specs and to increase the life of the heater. KELTECH SN SERIES SAFETY SHOWER HEATERS AND SYSTEMS FEATURES AND BENEFITS: Meet the New ANSI Z358.1 2004 Standards Keltech's safety shower heaters quickly reach the required ANSI standards for tepid water temperatures in as little as 20 to 30 seconds. Keltech tankless water heaters provide injured employees with a constant flow of tepid water at 20 to 30 gallons per minute for an ANSI mandated 15 minutes — or longer if needed. Unlike tanks, Keltech tankless water heaters can provide continuous tepid water for multiple incidents with no recovery time. Redundant Control and Safety Features Every SN safety shower heater that Keltech custom designs includes a patented temperature control system and multiple safety features like internal fusing, digital temperature control, Incoloy 800 sheathed heating elements to eliminate the "tingle" effect, an externally mounted emergency stop button, and NEMA 4 water tight enclosures. Safety only circuits monitor for over temperature conditions and ensure individual chambers do not exceed ANSI standards for tepid water temperature. The SN series is ETL/cETL approved and conforms to UL and CSA standards. Minimal Pressure Drop Means No Latent Heat Issues The large internal passageways engineered into every Keltech's SN series safety shower heater minimize pressure drop. If the water flow changes drastically, you will not have to be concerned with scalding. Our patented system guarantees there will be no large temperature swing. Quality Materials and Components Provide Reliable Performance and Minimal Maintenance All Keltech tankless water heating solutions are built to last and feature rugged industrial components constructed from high quality copper and brass tested to 300 PSI. Our heating elements are Incoloy sheathed to provide longer life. Maintenance is minimal, falling within the normal ANSI requirements. One of the best features of a Keltech tankless water heating system is never having to open its enclosure door. Easy to Install SN safety shower heaters come standard with NEMA enclosures and are easy to install: Just add water and power. All you need is access to one electrical connection and a cold water line. In fact, Keltech SN series safety shower heaters are wired to 480 Delta and 600 Delta — they do not require a neutral. This flexibility allows the tankless safety shower heaters and systems to be mounted near your existing shower and/or emergency eyewash facilities. Keltech's safety shower heaters are also compact and do not require large floor space: the SN series can be wall mounted almost anywhere in the vertical position. Keltech's freestanding shower heating units include a sturdy floor stand kit. Save Energy from Day One The Keltech tankless safety shower heaters and systems are energy efficient and minimize utility cost. They perform on–demand requiring power and water only when needed. There is no need to heat a 300 gallon boiler 24 hours a day, 365 days a year. There's also no need for expensive re–circulation loops. That saves your organization money and keeps the safety of your employees and technicians first. Patented safeties to ensure water temperatures remain within the ANSI tepid water standards Anti–scald feature standard Capable of supplying tepid water to combination shower and eyewash heater without overheating No mixing valves required SN series can be fitted with a shower or a complete shower skid system Each skid system is a complete package designed to meet your temperature range requirements and safety shower criteria With proper sizing, one heater can be used to supply multiple showers Many standard features are available but can also be customized for your site location's requirements Available in 400V 3–phase delta and 600V 3–phase delta configurations Complies with ANSI Z358.1 standards CONTACT US FOR MORE INFORMATION AND OPTIONSSPECIFICATIONS535 lbs.1 unit1.5 - 30 GPM Flow Rate

Manufacturer: Keltech, Manufacturer Part Number: SN543/600DTEPID WATER SOLUTIONS Keltech SN series of safety shower systems provide portability that anti–scald valves and fixed plumbing cannot match. Our tankless water heaters can be mounted almost anywhere. Just add water and power. The Keltech SN series shower heater can be paired with any high quality commercial safety shower apparatus. Keltech tankless safety shower heaters can be mounted near your existing shower and/or eyewash facilities. SIZING RANGES TO MEET YOUR SPECS Keltech tankless safety shower heating solutions range in size and capacity from 36kW to 144kW. Standard voltage is 480V 3–phase delta or 600V 3–phase delta at various amperages with water flow up to 40 GPM with activation beginning as low as 1.5 GPM. PRECISION ENGINEERED FOR OPTIMAL PERFORMANCE Keltech safety shower water heating solutions are built to last and feature quality control systems and premium materials like copper and brass to meet your demanding specs and to increase the life of the heater. KELTECH SN SERIES SAFETY SHOWER HEATERS AND SYSTEMS FEATURES AND BENEFITS: Meet the New ANSI Z358.1 2004 Standards Keltech's safety shower heaters quickly reach the required ANSI standards for tepid water temperatures in as little as 20 to 30 seconds. Keltech tankless water heaters provide injured employees with a constant flow of tepid water at 20 to 30 gallons per minute for an ANSI mandated 15 minutes — or longer if needed. Unlike tanks, Keltech tankless water heaters can provide continuous tepid water for multiple incidents with no recovery time. Redundant Control and Safety Features Every SN safety shower heater that Keltech custom designs includes a patented temperature control system and multiple safety features like internal fusing, digital temperature control, Incoloy 800 sheathed heating elements to eliminate the "tingle" effect, an externally mounted emergency stop button, and NEMA 4 water tight enclosures. Safety only circuits monitor for over temperature conditions and ensure individual chambers do not exceed ANSI standards for tepid water temperature. The SN series is ETL/cETL approved and conforms to UL and CSA standards. Minimal Pressure Drop Means No Latent Heat Issues The large internal passageways engineered into every Keltech's SN series safety shower heater minimize pressure drop. If the water flow changes drastically, you will not have to be concerned with scalding. Our patented system guarantees there will be no large temperature swing. Quality Materials and Components Provide Reliable Performance and Minimal Maintenance All Keltech tankless water heating solutions are built to last and feature rugged industrial components constructed from high quality copper and brass tested to 300 PSI. Our heating elements are Incoloy sheathed to provide longer life. Maintenance is minimal, falling within the normal ANSI requirements. One of the best features of a Keltech tankless water heating system is never having to open its enclosure door. Easy to Install SN safety shower heaters come standard with NEMA enclosures and are easy to install: Just add water and power. All you need is access to one electrical connection and a cold water line. In fact, Keltech SN series safety shower heaters are wired to 480 Delta and 600 Delta — they do not require a neutral. This flexibility allows the tankless safety shower heaters and systems to be mounted near your existing shower and/or emergency eyewash facilities. Keltech's safety shower heaters are also compact and do not require large floor space: the SN series can be wall mounted almost anywhere in the vertical position. Keltech's freestanding shower heating units include a sturdy floor stand kit. Save Energy from Day One The Keltech tankless safety shower heaters and systems are energy efficient and minimize utility cost. They perform on–demand requiring power and water only when needed. There is no need to heat a 300 gallon boiler 24 hours a day, 365 days a year. There's also no need for expensive re–circulation loops. That saves your organization money and keeps the safety of your employees and technicians first. Patented safeties to ensure water temperatures remain within the ANSI tepid water standards Anti–scald feature standard Capable of supplying tepid water to combination shower and eyewash heater without overheating No mixing valves required SN series can be fitted with a shower or a complete shower skid system Each skid system is a complete package designed to meet your temperature range requirements and safety shower criteria With proper sizing, one heater can be used to supply multiple showers Many standard features are available but can also be customized for your site location's requirements Available in 400V 3–phase delta and 600V 3–phase delta configurations Complies with ANSI Z358.1 standards CONTACT US FOR MORE INFORMATION AND OPTIONSSPECIFICATIONS445 lbs.1 unit1.5 - 25 GPM Flow Rate

Manufacturer: Keltech, Manufacturer Part Number: SN1083/600DTEPID WATER SOLUTIONS Keltech SN series of safety shower systems provide portability that anti–scald valves and fixed plumbing cannot match. Our tankless water heaters can be mounted almost anywhere. Just add water and power. The Keltech SN series shower heater can be paired with any high quality commercial safety shower apparatus. Keltech tankless safety shower heaters can be mounted near your existing shower and/or eyewash facilities. SIZING RANGES TO MEET YOUR SPECS Keltech tankless safety shower heating solutions range in size and capacity from 36kW to 144kW. Standard voltage is 480V 3–phase delta or 600V 3–phase delta at various amperages with water flow up to 40 GPM with activation beginning as low as 1.5 GPM. PRECISION ENGINEERED FOR OPTIMAL PERFORMANCE Keltech safety shower water heating solutions are built to last and feature quality control systems and premium materials like copper and brass to meet your demanding specs and to increase the life of the heater. KELTECH SN SERIES SAFETY SHOWER HEATERS AND SYSTEMS FEATURES AND BENEFITS: Meet the New ANSI Z358.1 2004 Standards Keltech's safety shower heaters quickly reach the required ANSI standards for tepid water temperatures in as little as 20 to 30 seconds. Keltech tankless water heaters provide injured employees with a constant flow of tepid water at 20 to 30 gallons per minute for an ANSI mandated 15 minutes — or longer if needed. Unlike tanks, Keltech tankless water heaters can provide continuous tepid water for multiple incidents with no recovery time. Redundant Control and Safety Features Every SN safety shower heater that Keltech custom designs includes a patented temperature control system and multiple safety features like internal fusing, digital temperature control, Incoloy 800 sheathed heating elements to eliminate the "tingle" effect, an externally mounted emergency stop button, and NEMA 4 water tight enclosures. Safety only circuits monitor for over temperature conditions and ensure individual chambers do not exceed ANSI standards for tepid water temperature. The SN series is ETL/cETL approved and conforms to UL and CSA standards. Minimal Pressure Drop Means No Latent Heat Issues The large internal passageways engineered into every Keltech's SN series safety shower heater minimize pressure drop. If the water flow changes drastically, you will not have to be concerned with scalding. Our patented system guarantees there will be no large temperature swing. Quality Materials and Components Provide Reliable Performance and Minimal Maintenance All Keltech tankless water heating solutions are built to last and feature rugged industrial components constructed from high quality copper and brass tested to 300 PSI. Our heating elements are Incoloy sheathed to provide longer life. Maintenance is minimal, falling within the normal ANSI requirements. One of the best features of a Keltech tankless water heating system is never having to open its enclosure door. Easy to Install SN safety shower heaters come standard with NEMA enclosures and are easy to install: Just add water and power. All you need is access to one electrical connection and a cold water line. In fact, Keltech SN series safety shower heaters are wired to 480 Delta and 600 Delta — they do not require a neutral. This flexibility allows the tankless safety shower heaters and systems to be mounted near your existing shower and/or emergency eyewash facilities. Keltech's safety shower heaters are also compact and do not require large floor space: the SN series can be wall mounted almost anywhere in the vertical position. Keltech's freestanding shower heating units include a sturdy floor stand kit. Save Energy from Day One The Keltech tankless safety shower heaters and systems are energy efficient and minimize utility cost. They perform on–demand requiring power and water only when needed. There is no need to heat a 300 gallon boiler 24 hours a day, 365 days a year. There's also no need for expensive re–circulation loops. That saves your organization money and keeps the safety of your employees and technicians first. Patented safeties to ensure water temperatures remain within the ANSI tepid water standards Anti–scald feature standard Capable of supplying tepid water to combination shower and eyewash heater without overheating No mixing valves required SN series can be fitted with a shower or a complete shower skid system Each skid system is a complete package designed to meet your temperature range requirements and safety shower criteria With proper sizing, one heater can be used to supply multiple showers Many standard features are available but can also be customized for your site location's requirements Available in 400V 3–phase delta and 600V 3–phase delta configurations Complies with ANSI Z358.1 standards CONTACT US FOR MORE INFORMATION AND OPTIONSSPECIFICATIONS535 lbs.1 unit1.5 - 30 GPM Flow Rate

Manufacturer: Keltech, Manufacturer Part Number: SN723/600DTEPID WATER SOLUTIONS Keltech SN series of safety shower systems provide portability that anti–scald valves and fixed plumbing cannot match. Our tankless water heaters can be mounted almost anywhere. Just add water and power. The Keltech SN series shower heater can be paired with any high quality commercial safety shower apparatus. Keltech tankless safety shower heaters can be mounted near your existing shower and/or eyewash facilities. SIZING RANGES TO MEET YOUR SPECS Keltech tankless safety shower heating solutions range in size and capacity from 36kW to 144kW. Standard voltage is 480V 3–phase delta or 600V 3–phase delta at various amperages with water flow up to 40 GPM with activation beginning as low as 1.5 GPM. PRECISION ENGINEERED FOR OPTIMAL PERFORMANCE Keltech safety shower water heating solutions are built to last and feature quality control systems and premium materials like copper and brass to meet your demanding specs and to increase the life of the heater. KELTECH SN SERIES SAFETY SHOWER HEATERS AND SYSTEMS FEATURES AND BENEFITS: Meet the New ANSI Z358.1 2004 Standards Keltech's safety shower heaters quickly reach the required ANSI standards for tepid water temperatures in as little as 20 to 30 seconds. Keltech tankless water heaters provide injured employees with a constant flow of tepid water at 20 to 30 gallons per minute for an ANSI mandated 15 minutes — or longer if needed. Unlike tanks, Keltech tankless water heaters can provide continuous tepid water for multiple incidents with no recovery time. Redundant Control and Safety Features Every SN safety shower heater that Keltech custom designs includes a patented temperature control system and multiple safety features like internal fusing, digital temperature control, Incoloy 800 sheathed heating elements to eliminate the "tingle" effect, an externally mounted emergency stop button, and NEMA 4 water tight enclosures. Safety only circuits monitor for over temperature conditions and ensure individual chambers do not exceed ANSI standards for tepid water temperature. The SN series is ETL/cETL approved and conforms to UL and CSA standards. Minimal Pressure Drop Means No Latent Heat Issues The large internal passageways engineered into every Keltech's SN series safety shower heater minimize pressure drop. If the water flow changes drastically, you will not have to be concerned with scalding. Our patented system guarantees there will be no large temperature swing. Quality Materials and Components Provide Reliable Performance and Minimal Maintenance All Keltech tankless water heating solutions are built to last and feature rugged industrial components constructed from high quality copper and brass tested to 300 PSI. Our heating elements are Incoloy sheathed to provide longer life. Maintenance is minimal, falling within the normal ANSI requirements. One of the best features of a Keltech tankless water heating system is never having to open its enclosure door. Easy to Install SN safety shower heaters come standard with NEMA enclosures and are easy to install: Just add water and power. All you need is access to one electrical connection and a cold water line. In fact, Keltech SN series safety shower heaters are wired to 480 Delta and 600 Delta — they do not require a neutral. This flexibility allows the tankless safety shower heaters and systems to be mounted near your existing shower and/or emergency eyewash facilities. Keltech's safety shower heaters are also compact and do not require large floor space: the SN series can be wall mounted almost anywhere in the vertical position. Keltech's freestanding shower heating units include a sturdy floor stand kit. Save Energy from Day One The Keltech tankless safety shower heaters and systems are energy efficient and minimize utility cost. They perform on–demand requiring power and water only when needed. There is no need to heat a 300 gallon boiler 24 hours a day, 365 days a year. There's also no need for expensive re–circulation loops. That saves your organization money and keeps the safety of your employees and technicians first. Patented safeties to ensure water temperatures remain within the ANSI tepid water standards Anti–scald feature standard Capable of supplying tepid water to combination shower and eyewash heater without overheating No mixing valves required SN series can be fitted with a shower or a complete shower skid system Each skid system is a complete package designed to meet your temperature range requirements and safety shower criteria With proper sizing, one heater can be used to supply multiple showers Many standard features are available but can also be customized for your site location's requirements Available in 400V 3–phase delta and 600V 3–phase delta configurations Complies with ANSI Z358.1 standards CONTACT US FOR MORE INFORMATION AND OPTIONSSPECIFICATIONS535 lbs.1 unit1.5 - 30 GPM Flow Rate

Manufacturer: Keltech, Manufacturer Part Number: SN723/480DTEPID WATER SOLUTIONS Keltech SN series of safety shower systems provide portability that anti–scald valves and fixed plumbing cannot match. Our tankless water heaters can be mounted almost anywhere. Just add water and power. The Keltech SN series shower heater can be paired with any high quality commercial safety shower apparatus. Keltech tankless safety shower heaters can be mounted near your existing shower and/or eyewash facilities. SIZING RANGES TO MEET YOUR SPECS Keltech tankless safety shower heating solutions range in size and capacity from 36kW to 144kW. Standard voltage is 480V 3–phase delta or 600V 3–phase delta at various amperages with water flow up to 40 GPM with activation beginning as low as 1.5 GPM. PRECISION ENGINEERED FOR OPTIMAL PERFORMANCE Keltech safety shower water heating solutions are built to last and feature quality control systems and premium materials like copper and brass to meet your demanding specs and to increase the life of the heater. KELTECH SN SERIES SAFETY SHOWER HEATERS AND SYSTEMS FEATURES AND BENEFITS: Meet the New ANSI Z358.1 2004 Standards Keltech's safety shower heaters quickly reach the required ANSI standards for tepid water temperatures in as little as 20 to 30 seconds. Keltech tankless water heaters provide injured employees with a constant flow of tepid water at 20 to 30 gallons per minute for an ANSI mandated 15 minutes — or longer if needed. Unlike tanks, Keltech tankless water heaters can provide continuous tepid water for multiple incidents with no recovery time. Redundant Control and Safety Features Every SN safety shower heater that Keltech custom designs includes a patented temperature control system and multiple safety features like internal fusing, digital temperature control, Incoloy 800 sheathed heating elements to eliminate the "tingle" effect, an externally mounted emergency stop button, and NEMA 4 water tight enclosures. Safety only circuits monitor for over temperature conditions and ensure individual chambers do not exceed ANSI standards for tepid water temperature. The SN series is ETL/cETL approved and conforms to UL and CSA standards. Minimal Pressure Drop Means No Latent Heat Issues The large internal passageways engineered into every Keltech's SN series safety shower heater minimize pressure drop. If the water flow changes drastically, you will not have to be concerned with scalding. Our patented system guarantees there will be no large temperature swing. Quality Materials and Components Provide Reliable Performance and Minimal Maintenance All Keltech tankless water heating solutions are built to last and feature rugged industrial components constructed from high quality copper and brass tested to 300 PSI. Our heating elements are Incoloy sheathed to provide longer life. Maintenance is minimal, falling within the normal ANSI requirements. One of the best features of a Keltech tankless water heating system is never having to open its enclosure door. Easy to Install SN safety shower heaters come standard with NEMA enclosures and are easy to install: Just add water and power. All you need is access to one electrical connection and a cold water line. In fact, Keltech SN series safety shower heaters are wired to 480 Delta and 600 Delta — they do not require a neutral. This flexibility allows the tankless safety shower heaters and systems to be mounted near your existing shower and/or emergency eyewash facilities. Keltech's safety shower heaters are also compact and do not require large floor space: the SN series can be wall mounted almost anywhere in the vertical position. Keltech's freestanding shower heating units include a sturdy floor stand kit. Save Energy from Day One The Keltech tankless safety shower heaters and systems are energy efficient and minimize utility cost. They perform on–demand requiring power and water only when needed. There is no need to heat a 300 gallon boiler 24 hours a day, 365 days a year. There's also no need for expensive re–circulation loops. That saves your organization money and keeps the safety of your employees and technicians first. Patented safeties to ensure water temperatures remain within the ANSI tepid water standards Anti–scald feature standard Capable of supplying tepid water to combination shower and eyewash heater without overheating No mixing valves required SN series can be fitted with a shower or a complete shower skid system Each skid system is a complete package designed to meet your temperature range requirements and safety shower criteria With proper sizing, one heater can be used to supply multiple showers Many standard features are available but can also be customized for your site location's requirements Available in 400V 3–phase delta and 600V 3–phase delta configurations Complies with ANSI Z358.1 standards CONTACT US FOR MORE INFORMATION AND OPTIONSSPECIFICATIONS535 lbs.1 unit1.5 - 30 GPM Flow Rate

Manufacturer: Keltech, Manufacturer Part Number: SN633/480DTEPID WATER SOLUTIONS Keltech SN series of safety shower systems provide portability that anti–scald valves and fixed plumbing cannot match. Our tankless water heaters can be mounted almost anywhere. Just add water and power. The Keltech SN series shower heater can be paired with any high quality commercial safety shower apparatus. Keltech tankless safety shower heaters can be mounted near your existing shower and/or eyewash facilities. SIZING RANGES TO MEET YOUR SPECS Keltech tankless safety shower heating solutions range in size and capacity from 36kW to 144kW. Standard voltage is 480V 3–phase delta or 600V 3–phase delta at various amperages with water flow up to 40 GPM with activation beginning as low as 1.5 GPM. PRECISION ENGINEERED FOR OPTIMAL PERFORMANCE Keltech safety shower water heating solutions are built to last and feature quality control systems and premium materials like copper and brass to meet your demanding specs and to increase the life of the heater. KELTECH SN SERIES SAFETY SHOWER HEATERS AND SYSTEMS FEATURES AND BENEFITS: Meet the New ANSI Z358.1 2004 Standards Keltech's safety shower heaters quickly reach the required ANSI standards for tepid water temperatures in as little as 20 to 30 seconds. Keltech tankless water heaters provide injured employees with a constant flow of tepid water at 20 to 30 gallons per minute for an ANSI mandated 15 minutes — or longer if needed. Unlike tanks, Keltech tankless water heaters can provide continuous tepid water for multiple incidents with no recovery time. Redundant Control and Safety Features Every SN safety shower heater that Keltech custom designs includes a patented temperature control system and multiple safety features like internal fusing, digital temperature control, Incoloy 800 sheathed heating elements to eliminate the "tingle" effect, an externally mounted emergency stop button, and NEMA 4 water tight enclosures. Safety only circuits monitor for over temperature conditions and ensure individual chambers do not exceed ANSI standards for tepid water temperature. The SN series is ETL/cETL approved and conforms to UL and CSA standards. Minimal Pressure Drop Means No Latent Heat Issues The large internal passageways engineered into every Keltech's SN series safety shower heater minimize pressure drop. If the water flow changes drastically, you will not have to be concerned with scalding. Our patented system guarantees there will be no large temperature swing. Quality Materials and Components Provide Reliable Performance and Minimal Maintenance All Keltech tankless water heating solutions are built to last and feature rugged industrial components constructed from high quality copper and brass tested to 300 PSI. Our heating elements are Incoloy sheathed to provide longer life. Maintenance is minimal, falling within the normal ANSI requirements. One of the best features of a Keltech tankless water heating system is never having to open its enclosure door. Easy to Install SN safety shower heaters come standard with NEMA enclosures and are easy to install: Just add water and power. All you need is access to one electrical connection and a cold water line. In fact, Keltech SN series safety shower heaters are wired to 480 Delta and 600 Delta — they do not require a neutral. This flexibility allows the tankless safety shower heaters and systems to be mounted near your existing shower and/or emergency eyewash facilities. Keltech's safety shower heaters are also compact and do not require large floor space: the SN series can be wall mounted almost anywhere in the vertical position. Keltech's freestanding shower heating units include a sturdy floor stand kit. Save Energy from Day One The Keltech tankless safety shower heaters and systems are energy efficient and minimize utility cost. They perform on–demand requiring power and water only when needed. There is no need to heat a 300 gallon boiler 24 hours a day, 365 days a year. There's also no need for expensive re–circulation loops. That saves your organization money and keeps the safety of your employees and technicians first. Patented safeties to ensure water temperatures remain within the ANSI tepid water standards Anti–scald feature standard Capable of supplying tepid water to combination shower and eyewash heater without overheating No mixing valves required SN series can be fitted with a shower or a complete shower skid system Each skid system is a complete package designed to meet your temperature range requirements and safety shower criteria With proper sizing, one heater can be used to supply multiple showers Many standard features are available but can also be customized for your site location's requirements Available in 400V 3–phase delta and 600V 3–phase delta configurations Complies with ANSI Z358.1 standards CONTACT US FOR MORE INFORMATION AND OPTIONSSPECIFICATIONS495 lbs.1 unit1.5 - 25 GPM Flow Rate

Manufacturer: Keltech, Manufacturer Part Number: SN633/600DTEPID WATER SOLUTIONS Keltech SN series of safety shower systems provide portability that anti–scald valves and fixed plumbing cannot match. Our tankless water heaters can be mounted almost anywhere. Just add water and power. The Keltech SN series shower heater can be paired with any high quality commercial safety shower apparatus. Keltech tankless safety shower heaters can be mounted near your existing shower and/or eyewash facilities. SIZING RANGES TO MEET YOUR SPECS Keltech tankless safety shower heating solutions range in size and capacity from 36kW to 144kW. Standard voltage is 480V 3–phase delta or 600V 3–phase delta at various amperages with water flow up to 40 GPM with activation beginning as low as 1.5 GPM. PRECISION ENGINEERED FOR OPTIMAL PERFORMANCE Keltech safety shower water heating solutions are built to last and feature quality control systems and premium materials like copper and brass to meet your demanding specs and to increase the life of the heater. KELTECH SN SERIES SAFETY SHOWER HEATERS AND SYSTEMS FEATURES AND BENEFITS: Meet the New ANSI Z358.1 2004 Standards Keltech's safety shower heaters quickly reach the required ANSI standards for tepid water temperatures in as little as 20 to 30 seconds. Keltech tankless water heaters provide injured employees with a constant flow of tepid water at 20 to 30 gallons per minute for an ANSI mandated 15 minutes — or longer if needed. Unlike tanks, Keltech tankless water heaters can provide continuous tepid water for multiple incidents with no recovery time. Redundant Control and Safety Features Every SN safety shower heater that Keltech custom designs includes a patented temperature control system and multiple safety features like internal fusing, digital temperature control, Incoloy 800 sheathed heating elements to eliminate the "tingle" effect, an externally mounted emergency stop button, and NEMA 4 water tight enclosures. Safety only circuits monitor for over temperature conditions and ensure individual chambers do not exceed ANSI standards for tepid water temperature. The SN series is ETL/cETL approved and conforms to UL and CSA standards. Minimal Pressure Drop Means No Latent Heat Issues The large internal passageways engineered into every Keltech's SN series safety shower heater minimize pressure drop. If the water flow changes drastically, you will not have to be concerned with scalding. Our patented system guarantees there will be no large temperature swing. Quality Materials and Components Provide Reliable Performance and Minimal Maintenance All Keltech tankless water heating solutions are built to last and feature rugged industrial components constructed from high quality copper and brass tested to 300 PSI. Our heating elements are Incoloy sheathed to provide longer life. Maintenance is minimal, falling within the normal ANSI requirements. One of the best features of a Keltech tankless water heating system is never having to open its enclosure door. Easy to Install SN safety shower heaters come standard with NEMA enclosures and are easy to install: Just add water and power. All you need is access to one electrical connection and a cold water line. In fact, Keltech SN series safety shower heaters are wired to 480 Delta and 600 Delta — they do not require a neutral. This flexibility allows the tankless safety shower heaters and systems to be mounted near your existing shower and/or emergency eyewash facilities. Keltech's safety shower heaters are also compact and do not require large floor space: the SN series can be wall mounted almost anywhere in the vertical position. Keltech's freestanding shower heating units include a sturdy floor stand kit. Save Energy from Day One The Keltech tankless safety shower heaters and systems are energy efficient and minimize utility cost. They perform on–demand requiring power and water only when needed. There is no need to heat a 300 gallon boiler 24 hours a day, 365 days a year. There's also no need for expensive re–circulation loops. That saves your organization money and keeps the safety of your employees and technicians first. Patented safeties to ensure water temperatures remain within the ANSI tepid water standards Anti–scald feature standard Capable of supplying tepid water to combination shower and eyewash heater without overheating No mixing valves required SN series can be fitted with a shower or a complete shower skid system Each skid system is a complete package designed to meet your temperature range requirements and safety shower criteria With proper sizing, one heater can be used to supply multiple showers Many standard features are available but can also be customized for your site location's requirements Available in 400V 3–phase delta and 600V 3–phase delta configurations Complies with ANSI Z358.1 standards CONTACT US FOR MORE INFORMATION AND OPTIONSSPECIFICATIONS495 lbs.1 unit1.5 - 25 GPM Flow Rate

Manufacturer: Keltech, Manufacturer Part Number: SN543/480DTEPID WATER SOLUTIONS Keltech SN series of safety shower systems provide portability that anti–scald valves and fixed plumbing cannot match. Our tankless water heaters can be mounted almost anywhere. Just add water and power. The Keltech SN series shower heater can be paired with any high quality commercial safety shower apparatus. Keltech tankless safety shower heaters can be mounted near your existing shower and/or eyewash facilities. SIZING RANGES TO MEET YOUR SPECS Keltech tankless safety shower heating solutions range in size and capacity from 36kW to 144kW. Standard voltage is 480V 3–phase delta or 600V 3–phase delta at various amperages with water flow up to 40 GPM with activation beginning as low as 1.5 GPM. PRECISION ENGINEERED FOR OPTIMAL PERFORMANCE Keltech safety shower water heating solutions are built to last and feature quality control systems and premium materials like copper and brass to meet your demanding specs and to increase the life of the heater. KELTECH SN SERIES SAFETY SHOWER HEATERS AND SYSTEMS FEATURES AND BENEFITS: Meet the New ANSI Z358.1 2004 Standards Keltech's safety shower heaters quickly reach the required ANSI standards for tepid water temperatures in as little as 20 to 30 seconds. Keltech tankless water heaters provide injured employees with a constant flow of tepid water at 20 to 30 gallons per minute for an ANSI mandated 15 minutes — or longer if needed. Unlike tanks, Keltech tankless water heaters can provide continuous tepid water for multiple incidents with no recovery time. Redundant Control and Safety Features Every SN safety shower heater that Keltech custom designs includes a patented temperature control system and multiple safety features like internal fusing, digital temperature control, Incoloy 800 sheathed heating elements to eliminate the "tingle" effect, an externally mounted emergency stop button, and NEMA 4 water tight enclosures. Safety only circuits monitor for over temperature conditions and ensure individual chambers do not exceed ANSI standards for tepid water temperature. The SN series is ETL/cETL approved and conforms to UL and CSA standards. Minimal Pressure Drop Means No Latent Heat Issues The large internal passageways engineered into every Keltech's SN series safety shower heater minimize pressure drop. If the water flow changes drastically, you will not have to be concerned with scalding. Our patented system guarantees there will be no large temperature swing. Quality Materials and Components Provide Reliable Performance and Minimal Maintenance All Keltech tankless water heating solutions are built to last and feature rugged industrial components constructed from high quality copper and brass tested to 300 PSI. Our heating elements are Incoloy sheathed to provide longer life. Maintenance is minimal, falling within the normal ANSI requirements. One of the best features of a Keltech tankless water heating system is never having to open its enclosure door. Easy to Install SN safety shower heaters come standard with NEMA enclosures and are easy to install: Just add water and power. All you need is access to one electrical connection and a cold water line. In fact, Keltech SN series safety shower heaters are wired to 480 Delta and 600 Delta — they do not require a neutral. This flexibility allows the tankless safety shower heaters and systems to be mounted near your existing shower and/or emergency eyewash facilities. Keltech's safety shower heaters are also compact and do not require large floor space: the SN series can be wall mounted almost anywhere in the vertical position. Keltech's freestanding shower heating units include a sturdy floor stand kit. Save Energy from Day One The Keltech tankless safety shower heaters and systems are energy efficient and minimize utility cost. They perform on–demand requiring power and water only when needed. There is no need to heat a 300 gallon boiler 24 hours a day, 365 days a year. There's also no need for expensive re–circulation loops. That saves your organization money and keeps the safety of your employees and technicians first. Patented safeties to ensure water temperatures remain within the ANSI tepid water standards Anti–scald feature standard Capable of supplying tepid water to combination shower and eyewash heater without overheating No mixing valves required SN series can be fitted with a shower or a complete shower skid system Each skid system is a complete package designed to meet your temperature range requirements and safety shower criteria With proper sizing, one heater can be used to supply multiple showers Many standard features are available but can also be customized for your site location's requirements Available in 400V 3–phase delta and 600V 3–phase delta configurations Complies with ANSI Z358.1 standards CONTACT US FOR MORE INFORMATION AND OPTIONSSPECIFICATIONS445 lbs.1 unit1.5 - 25 GPM Flow Rate

Manufacturer: Keltech, Manufacturer Part Number: SN363/600DTEPID WATER SOLUTIONS Keltech SN series of safety shower systems provide portability that anti–scald valves and fixed plumbing cannot match. Our tankless water heaters can be mounted almost anywhere. Just add water and power. The Keltech SN series shower heater can be paired with any high quality commercial safety shower apparatus. Keltech tankless safety shower heaters can be mounted near your existing shower and/or eyewash facilities. SIZING RANGES TO MEET YOUR SPECS Keltech tankless safety shower heating solutions range in size and capacity from 36kW to 144kW. Standard voltage is 480V 3–phase delta or 600V 3–phase delta at various amperages with water flow up to 40 GPM with activation beginning as low as 1.5 GPM. PRECISION ENGINEERED FOR OPTIMAL PERFORMANCE Keltech safety shower water heating solutions are built to last and feature quality control systems and premium materials like copper and brass to meet your demanding specs and to increase the life of the heater. KELTECH SN SERIES SAFETY SHOWER HEATERS AND SYSTEMS FEATURES AND BENEFITS: Meet the New ANSI Z358.1 2004 Standards Keltech's safety shower heaters quickly reach the required ANSI standards for tepid water temperatures in as little as 20 to 30 seconds. Keltech tankless water heaters provide injured employees with a constant flow of tepid water at 20 to 30 gallons per minute for an ANSI mandated 15 minutes — or longer if needed. Unlike tanks, Keltech tankless water heaters can provide continuous tepid water for multiple incidents with no recovery time. Redundant Control and Safety Features Every SN safety shower heater that Keltech custom designs includes a patented temperature control system and multiple safety features like internal fusing, digital temperature control, Incoloy 800 sheathed heating elements to eliminate the "tingle" effect, an externally mounted emergency stop button, and NEMA 4 water tight enclosures. Safety only circuits monitor for over temperature conditions and ensure individual chambers do not exceed ANSI standards for tepid water temperature. The SN series is ETL/cETL approved and conforms to UL and CSA standards. Minimal Pressure Drop Means No Latent Heat Issues The large internal passageways engineered into every Keltech's SN series safety shower heater minimize pressure drop. If the water flow changes drastically, you will not have to be concerned with scalding. Our patented system guarantees there will be no large temperature swing. Quality Materials and Components Provide Reliable Performance and Minimal Maintenance All Keltech tankless water heating solutions are built to last and feature rugged industrial components constructed from high quality copper and brass tested to 300 PSI. Our heating elements are Incoloy sheathed to provide longer life. Maintenance is minimal, falling within the normal ANSI requirements. One of the best features of a Keltech tankless water heating system is never having to open its enclosure door. Easy to Install SN safety shower heaters come standard with NEMA enclosures and are easy to install: Just add water and power. All you need is access to one electrical connection and a cold water line. In fact, Keltech SN series safety shower heaters are wired to 480 Delta and 600 Delta — they do not require a neutral. This flexibility allows the tankless safety shower heaters and systems to be mounted near your existing shower and/or emergency eyewash facilities. Keltech's safety shower heaters are also compact and do not require large floor space: the SN series can be wall mounted almost anywhere in the vertical position. Keltech's freestanding shower heating units include a sturdy floor stand kit. Save Energy from Day One The Keltech tankless safety shower heaters and systems are energy efficient and minimize utility cost. They perform on–demand requiring power and water only when needed. There is no need to heat a 300 gallon boiler 24 hours a day, 365 days a year. There's also no need for expensive re–circulation loops. That saves your organization money and keeps the safety of your employees and technicians first. Patented safeties to ensure water temperatures remain within the ANSI tepid water standards Anti–scald feature standard Capable of supplying tepid water to combination shower and eyewash heater without overheating No mixing valves required SN series can be fitted with a shower or a complete shower skid system Each skid system is a complete package designed to meet your temperature range requirements and safety shower criteria With proper sizing, one heater can be used to supply multiple showers Many standard features are available but can also be customized for your site location's requirements Available in 400V 3–phase delta and 600V 3–phase delta configurations Complies with ANSI Z358.1 standards CONTACT US FOR MORE INFORMATION AND OPTIONSSPECIFICATIONS445 lbs.1 unit1.5 - 25 GPM Flow Rate

Manufacturer: Keltech, Manufacturer Part Number: SN363/480DTEPID WATER SOLUTIONS Keltech SN series of safety shower systems provide portability that anti–scald valves and fixed plumbing cannot match. Our tankless water heaters can be mounted almost anywhere. Just add water and power. The Keltech SN series shower heater can be paired with any high quality commercial safety shower apparatus. Keltech tankless safety shower heaters can be mounted near your existing shower and/or eyewash facilities. SIZING RANGES TO MEET YOUR SPECS Keltech tankless safety shower heating solutions range in size and capacity from 36kW to 144kW. Standard voltage is 480V 3–phase delta or 600V 3–phase delta at various amperages with water flow up to 40 GPM with activation beginning as low as 1.5 GPM. PRECISION ENGINEERED FOR OPTIMAL PERFORMANCE Keltech safety shower water heating solutions are built to last and feature quality control systems and premium materials like copper and brass to meet your demanding specs and to increase the life of the heater. KELTECH SN SERIES SAFETY SHOWER HEATERS AND SYSTEMS FEATURES AND BENEFITS: Meet the New ANSI Z358.1 2004 Standards Keltech's safety shower heaters quickly reach the required ANSI standards for tepid water temperatures in as little as 20 to 30 seconds. Keltech tankless water heaters provide injured employees with a constant flow of tepid water at 20 to 30 gallons per minute for an ANSI mandated 15 minutes — or longer if needed. Unlike tanks, Keltech tankless water heaters can provide continuous tepid water for multiple incidents with no recovery time. Redundant Control and Safety Features Every SN safety shower heater that Keltech custom designs includes a patented temperature control system and multiple safety features like internal fusing, digital temperature control, Incoloy 800 sheathed heating elements to eliminate the "tingle" effect, an externally mounted emergency stop button, and NEMA 4 water tight enclosures. Safety only circuits monitor for over temperature conditions and ensure individual chambers do not exceed ANSI standards for tepid water temperature. The SN series is ETL/cETL approved and conforms to UL and CSA standards. Minimal Pressure Drop Means No Latent Heat Issues The large internal passageways engineered into every Keltech's SN series safety shower heater minimize pressure drop. If the water flow changes drastically, you will not have to be concerned with scalding. Our patented system guarantees there will be no large temperature swing. Quality Materials and Components Provide Reliable Performance and Minimal Maintenance All Keltech tankless water heating solutions are built to last and feature rugged industrial components constructed from high quality copper and brass tested to 300 PSI. Our heating elements are Incoloy sheathed to provide longer life. Maintenance is minimal, falling within the normal ANSI requirements. One of the best features of a Keltech tankless water heating system is never having to open its enclosure door. Easy to Install SN safety shower heaters come standard with NEMA enclosures and are easy to install: Just add water and power. All you need is access to one electrical connection and a cold water line. In fact, Keltech SN series safety shower heaters are wired to 480 Delta and 600 Delta — they do not require a neutral. This flexibility allows the tankless safety shower heaters and systems to be mounted near your existing shower and/or emergency eyewash facilities. Keltech's safety shower heaters are also compact and do not require large floor space: the SN series can be wall mounted almost anywhere in the vertical position. Keltech's freestanding shower heating units include a sturdy floor stand kit. Save Energy from Day One The Keltech tankless safety shower heaters and systems are energy efficient and minimize utility cost. They perform on–demand requiring power and water only when needed. There is no need to heat a 300 gallon boiler 24 hours a day, 365 days a year. There's also no need for expensive re–circulation loops. That saves your organization money and keeps the safety of your employees and technicians first. Patented safeties to ensure water temperatures remain within the ANSI tepid water standards Anti–scald feature standard Capable of supplying tepid water to combination shower and eyewash heater without overheating No mixing valves required SN series can be fitted with a shower or a complete shower skid system Each skid system is a complete package designed to meet your temperature range requirements and safety shower criteria With proper sizing, one heater can be used to supply multiple showers Many standard features are available but can also be customized for your site location's requirements Available in 400V 3–phase delta and 600V 3–phase delta configurations Complies with ANSI Z358.1 standards CONTACT US FOR MORE INFORMATION AND OPTIONSSPECIFICATIONS445 lbs.1 unit1.5 - 25 GPM Flow Rate

Manufacturer: Hughes, Manufacturer Part Number: SD32K45GIntegral drain sump and strip screens fitted to entrance reduce the risk of surplus contaminated water outside of the cubicle area Eye/face wash with integral, durable acrylic capped ABS lid protects against dust and debris—activate by simply pulling down the cover Designed for locations where space is at a premium or the emergency safety shower needs to be enclosed, this all-in-one ANSI-compliant combination cubicle shower and eye/face wash helps prevent overspray and is activated by hand upon entry. The cubicle shower has a stainless steel hollow section frame enclosed in GRP sheeting with stainless steel pipes for corrosion resistance and extended life. The exterior sheeting includes universal pictogram signs and green and white safety stripes. Mounted on the inside of the cubicle for maximum benefit, the eye/face wash with high, ANSI-compliant flow rate includes aerated diffusers with fine mesh strainers and an individual flow controller which provide a soft, scrubbing action to the eyes and face. Covered bowl also ensures that the eyewash nozzles and bowl remain clean and free from contamination at all times—no dust covers needed. Easy-to-reach flow regulator valve positioned on side of bowl adjusts to suit the severity of the accident. The system features a specially designed, high-performance quarter-turn ball valve made of 316L stainless steel to endure the harshest environments and site conditions. Low operating torque to open valve offers reliable, easy on/off operation when emergencies occur. Valve includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Includes an inspection record tag for recording test and service history.SPECIFICATIONSEye/Face Wash Bowl Material: Acrylic-Capped ABS PlasticActivation: Shower: Pull Lever, Eye/Face wash: Pull Lid ForwardMaterial Specifications: Stainless Steel Frame with GRP Paneling