haws

Manufacturer: Haws, Manufacturer Part Number : 1RKHO.PThe Haws 1RKHO.P sensor retrofit kit includes an electric solenoid valve controlled by a sensor that will convert most Haws standard push button operated wall-mounted single station drinking fountains, and 1920 bottle fillers to be touchless, which allows these products to be operated hands-free. Each kit contains a touchless, motion activated sensor that activates a stainless steel solenoid valve to start the flow of water, a valve regulator to control the amount of water delivered to the fountain or bottle filler, and a plug-in transformer (mounted inside a wall, away from water). Not intended for freeze-resistant models.

Manufacturer: Haws, Manufacturer Part Number : 2RKHO.HThe Haws 2RKHO.H sensor retrofit kit includes two electric solenoid valves controlled by sensors that will convert most Haws standard push button operated wall-mounted dual station drinking fountains, or a single fountain-1920 bottle filler combination to be a touchless system which allows these products to be operated hands-free. Each kit contains touchless, motion activated sensors that activates stainless steel solenoid valves to start the flow of water, valve regulators to control the amount of water delivered to the fountain or bottle filler, and a hard-wired in transformer (mounted inside a wall, away from water). Not intended for freeze-resistant models.

Manufacturer: Haws, Manufacturer Part Number : 2RKHO.PThe Haws 2RKHO.H sensor retrofit kit includes electric solenoid valves controlled by sensors that will convert most Haws standard push button operated wall-mounted dual station drinking fountains, or a single fountain-1920 bottle filler combination to be a touchless system which allows these products to be operated hands-free. Each kit contains touchless, motion activated sensors that activate stainless steel solenoid valves to start the flow of water, valve regulators to control the amount of water delivered to the fountain or bottle filler, and a plug-in transformer (mounted inside a wall, away from water).

Manufacturer: Haws, Manufacturer Part Number : 3RKHO.HThe Haws 3RKHO.H sensor retrofit kit includes electric solenoid valves controlled by sensors that will convert most Haws standard push button operated wall-mounted dual station drinking fountains and the 1920 bottle filler combination to be a touchless system which allows these products to be operated hands-free. Each kit contains touchless, motion activated sensors that activate stainless steel solenoid valves to start the flow of water, valve regulators to control the amount of water delivered to the fountain or bottle filler, and a hard-wired in transformer (mounted inside a wall, away from water).

Manufacturer: Haws, Manufacturer Part Number : 3RKHO.PThe Haws 3RKHO.P sensor retrofit kit includes electric solenoid valves controlled by sensors that will convert most Haws standard push button operated wall-mounted dual station drinking fountains and the 1920 bottle filler combination to be a touchless system which allows these products to be operated hands-free. Each kit contains touchless, motion activated sensors that activate stainless steel solenoid valves to start the flow of water, valve regulators to control the amount of water delivered to the fountain or bottle filler, and a plug-in transformer (mounted inside a wall, away from water).

Manufacturer: Haws, Manufacturer Part Number : SK1Model SK1 is a wrap around matching satin finish stainless steel cane touch skirt for installation on the high unit in some applications that may need to comply with ADA protruding objects guidelines. For use on Models 1119 and H1119.8

Manufacturer: Haws, Manufacturer Part Number : SK3Model SK3 is a wrap around satin finish stainless steel cane touch skirt for installation on the high unit in some applications that may need to comply with ADA protruding objects guidelines. For use on Models Haws 1011 and H1011 series fountains.

Manufacturer: Haws, Manufacturer Part Number : SK3HPSModel SK3HPS is a wrap around matching high polished finished stainless steel cane touch skirt for installation on the high unit in some applications that may need to comply with ADA protruding objects guidelines. For use on Models 1011HPS and H1011.8HPS.

Manufacturer: Haws, Manufacturer Part Number : 5874PBModel 5874PB push-button activated fountain valve is the only all stainless steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and with front access to the water stream height adjustment for easy maintenance without having to remove the valve. Operating pressure range of 30 to 90 psi (2.1 to 6.2 bar).

Manufacturer: Haws, Manufacturer Part Number : 5874PBFModel 5874PBF push-button activated fountain valve is the only all stainless steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and with front access to the water stream height adjustment for easy maintenance without having to remove the valve. Operating pressure range of 30 to 90 psi (2.1 to 6.2 bar).

Manufacturer: Haws, Manufacturer Part Number : 6518FRModel 6518FR freeze-resistant bury valve for use with single bubbler head pedestal fountains shall include a brass pneumatic operated valve installed below the frost line, check valve to drain water from unit when not in use and to prevent back-flow cross contamination, regulator valve to control stream height, separate valve access and pull-out design for easy maintenance, 6" (15.2 cm) diameter PVC pipe to encase valve assembly, and 1/2" NPT supply.

Manufacturer: Haws, Manufacturer Part Number : 6521FRModel 6521FR freeze-resistant valve system for use with single bubbler wall mounted fountains shall include a brass pneumatic operated valve, waste assembly designed to drain water left in supply line to fountain, regulator valve to control stream height, insulated galvanized steel mounting box installed on interior wall where temperatures maintain a minimum of 50° F (10° C), 1/2" NPT supply, and 1-1/4" NPT trap.

Manufacturer: Haws, Manufacturer Part Number : 6518.2FRModel 6518.2FR freeze-resistant bury valve for use with dual bubbler head pedestal fountains shall include dual brass pneumatic-operated valves installed below the frost line, check valve to drain water from unit when not in use and to prevent back-flow cross contamination, regulator valve to control stream height, separate valve access and pull-out design for easy maintenance, 6" (15.2 cm) diameter PVC pipe to encase valve assembly, and 1/2" NPT supply.

Manufacturer: Haws, Manufacturer Part Number: 83008309LFAHaws® Axion® MSR Emergency Shower & Eye/Face Wash - Model Number: 83008309|UOM: EA - First Aid and Emergency Products - Emergency Eyewash Equipment

Manufacturer: Haws, Manufacturer Part Number: 7260B7270BLFAHaws® Axion® MSR Wall-Mounted Eye/Face Wash - Model Number: 7260B7270B|UOM: EA - First Aid and Emergency Products - Emergency Eyewash Equipment

Manufacturer: Haws, Manufacturer Part Number: 7501LFAHaws® Portable Eyewash Station - Model Number: 7501|UOM: EA - First Aid and Emergency Products - Emergency Eyewash Equipment

Manufacturer: Haws, Manufacturer Part Number : RK5715Model RK5715 repair kit includes the flow control for the Haws model 5715 bubbler head on the Haws 1200 series water coolers.

Manufacturer: Haws, Manufacturer Part Number : RK5716Model RK5716 repair kit includes the flow control for the Haws model 5716 stainless steel bubbler head on the Haws 1200 series water coolers.

Manufacturer: Haws, Manufacturer Part Number : 5715The Haws 5715 replacement anti-rotational bubbler head is designed with a shielded fountain spout incorporating an anti-squirt angled drinking stream. A pressure compensating flow control supplies a laminar flow nozzle. Made with a plastic main body and a antimicrobial rubber mouth guard.

Manufacturer: Haws, Manufacturer Part Number : 1920HPSModel 1920HPS wall mounted high-polished stainless steel bottle filler shall include 100% lead-free waterways, 1 gpm (3.78 L) laminar flow, push-button operated stainless steel valve with front-accessible cartridge and flow adjustment, and polished stainless steel construction. It can be used as a stand-alone station, or mounted above the Haws‚® 1001HPS and 1011HPS series drinking fountains.Note***** This item requires a mounting plate for installation. Please purchase mounting plate SKU# 6700 or SKU# 6700R .*****

Manufacturer: Haws, Manufacturer Part Number : 6472Model 6472, Surface Mount replacement drain pan assembly for Haws models 2000SMS and 2000SMSN, which includes the grate, basin and gasket.

Manufacturer: Haws, Manufacturer Part Number : 6423Model 6423 replacement filter is used on the Hydration By Haws models (2000S, 2000SN, 2000SMS and 2000SMSN) and is tested and certified by CSA against NSF/ANSI Standard 42 for the reduction of chlorine (taste and odor) and against NSF/ANSI Standard 53 for the reduction of lead and 99.99% of cysts. It is a carbon block filter cartridge with a service life of 1 year/2,500 gallons (9463 L). Filter contains an onboard chip to store total gallon usage; this chip interfaces with an Electronic Lifecycle Control system to allow water flow only until the filter reaches its total gallon capacity.

Manufacturer: Haws, Manufacturer Part Number : 6810Model 6810 In-wall floor mounted fixture carrier: Two 2½” x 1½” x 1/8” thick structural steel uprights having 6” x 3" x 3/8” thick welded steel 4-bolt floor flanges, supplied with ‘U’ bolts and hardware. For use in conjunction with Haws in-wall mounting plates 6700, 6700.4, 6710, 6715, 6717, or 6776, for extra heavy duty fixture support. Fits inside standard 2” x 4” wall construction. Suitable for use with either 3/8" or 1/2" concrete anchors (by others). Includes mounting holes for plumbing stub out bracket and electrical boxes, and a on-site custom-fit side drain port. This port can be placed at any height. Exceeds requirements when tested in accordance to ASME Standard A112.6.1M. Design was independently verified as suitable to meet HCAI and CBC anchor spacing requirements.

Manufacturer: Haws, Manufacturer Part Number : MTGFR.17Model MTGFR.17 in-wall mounting frame is made of 16 gauge galvanized steel with welded-in heavy-duty 10 gauge mounting plate with pre-punched mounting holes, and is used with Haws H1117.8 series fountains.