haws

Manufacturer: Haws, Manufacturer Part Number: 8901RFKModel 8901RFK body spray features a ABS plastic head, stay-open squeeze lever valve, 8 foot (243.8 cm) hose and installation kit. Kit includes clamp hook-up, tee clips and fitting for retrofit installation on most combination shower and eyewash units. Supply: 1/2" IPS. In order to comply with state codes the use of a vacuum breaker is required with all hand held body spray units (Haws offers model SP212) Per ANSI/ISEA Z358.1, "Hand held drench hoses provide support for emergency shower and eyewash units, but shall not replace them."

Manufacturer: Haws, Manufacturer Part Number : 4110ADAModel 4110ADA barrier-free deck mounted sink shall include a white acid-resistant enameled iron 24" x 16" x 5" (61 x 40.6 x 12.7 cm) deep basin with barrier-free capabilities when installation guidelines are followed, two cross-slotted holes to accept faucets, and a stainless steel mounting rim.

Manufacturer: Haws, Manufacturer Part Number : 1430Model 1430 wall mounted drinking fountain shall include a white enameled-iron basin mounted with twin galvanized cast-iron wall brackets, push-button operated stainless steel valves with front-accessible cartridge and flow adjustment, 100% lead-free waterways, dual polished chrome-plated brass vandal-resistant bubbler heads, polished chrome-plated brass vandal-resistant waste strainer, vandal-resistant bottom plate, and chrome-plated 1-1/2" NPT trap.

Manufacturer: Haws, Manufacturer Part Number : 1435Model 1435 wall mounted drinking fountain shall include a white enameled-iron basin mounted with twin galvanized cast-iron wall brackets, push-button operated stainless steel valves with front-accessible cartridge and flow adjustment, 100% lead-free waterways, triple polished chrome-plated brass vandal-resistant bubbler heads, polished chrome-plated brass vandal-resistant waste strainer, vandal-resistant bottom plate, and chrome-plated 1-1/2" NPT trap.

Manufacturer: Haws, Manufacturer Part Number : 1430HOModel 1430HO wall mounted touchless drinking fountain shall include a white enameled-iron basin mounted with twin galvanized cast-iron wall brackets, touchless sensor operated stainless steel solenoid valves controlled by transformers, 100% lead-free waterways, dual polished chrome-plated brass vandal-resistant bubbler heads, polished chrome-plated brass vandal-resistant waste strainer, vandal-resistant bottom plate, and chrome-plated 1-1/2" NPT trap.

Manufacturer: Haws, Manufacturer Part Number : 1435HOModel 1435HO wall mounted touchless drinking fountain shall include a white enameled-iron basin mounted with twin galvanized cast-iron wall brackets, touchless sensor operated stainless steel solenoid valves controlled by a transformer, 100% lead-free waterways, triple polished chrome-plated brass vandal-resistant bubbler heads, polished chrome-plated brass vandal-resistant waste strainer, vandal-resistant bottom plate, and chrome-plated 1-1/2" NPT trap.

Manufacturer: Haws, Manufacturer Part Number : HC111The Haws model HC111 is the fan blade for the 1200 series water cooler chilling compartment.

Manufacturer: Haws, Manufacturer Part Number : HC117The Haws model HC117 is a fan motor for the 1200 series water coolers chiller compartment.

Manufacturer: Haws, Manufacturer Part Number : 5010SSModel 5010SS is a polished stainless steel push button bubbler valve with pressure compensating adjustable stream regulation and shielded sanitary nozzle design.

Manufacturer: Haws, Manufacturer Part Number : 5830LFModel 5830LF is a polished chrome-plated lead-free brass bubbler valve which incorporates self-closing lever handle operation and uses a screwdriver adjustment stream control. It is supplied with a 1/2" NPT inlet and 1/4" NPT outlet.

Manufacturer: Haws, Manufacturer Part Number : 5851LFModel 5851LF is a panel mounted valve with a polished chrome-plated vandal-resistant lever handle and rough brass body, mount to a maximum wall thickness capability of 1" (2.5 cm), and 3/8" NPT inlet and outlet.

Manufacturer: Haws, Manufacturer Part Number : 6250LFModel 6250LF bib faucet is for use on some Haws pedestal fountains shall include a polished chrome-plated brass lever handle valve with integral mounting flange, mounting hardware and fittings, and 3/8" NPT inlet.

Manufacturer: Haws, Manufacturer Part Number : 6252EHLFModel 6252EHLF is a brass self-closing plain end lead-free faucet with an extended lever handle which operates with less than 3.5 push pounds (1.6 kg), and has a 1/2" NPT inlet.

Manufacturer: Haws, Manufacturer Part Number : 6275Model 6275 compression hose bib faucet is designed to activate through a turn knob on the top of the unit. Connection is 3/4" male hose thread x 1/2" NPT inlet.

Manufacturer: Haws, Manufacturer Part Number : 6428Model 6428 replacement filter is used with the Haws 1200 series water coolers. It is a carbon block filter cartridge with a service life of 1 year/3000-gallons (11356 L). Filter contains an onboard chip to store total gallon usage; this chip interfaces with an Electronic Lifecycle Control system to allow water flow only until the filter reaches its total gallon capacity. Tested and certified by CSA against NSF/ANSI Standard 42 for the reduction of chlorine (taste and odor) and against NSF/ANSI Standard 53 for the reduction of lead and cysts.

Manufacturer: Haws, Manufacturer Part Number : 6394Model 6394 flow control is engineered to provide a proper drinking stream height at pressures varying from 30 - 90 psi (2.1 - 6.2 bar). It is important that the flow control selected match the bubbler orifice. Lead-free Tellurium copper coupling with .4 gpm (1.5 L) flow rate. Includes cone, friction washers and slip joint nut. 9/16" (1.4 cm) OD inlet x 1/2" NPT(F) outlet.

Manufacturer: Haws, Manufacturer Part Number : 1RKHO.HThe Haws 1RKHO.H sensor retrofit kit includes an electric solenoid valve controlled by a sensor that will convert most Haws standard push button operated wall-mounted single station drinking fountains, and 1920 bottle fillers to be touchless, which allows these products to be operated hands-free. Each kit contains a touchless, motion activated sensor that activates a stainless steel solenoid valve to start the flow of water, a valve regulator to control the amount of water delivered to the fountain or bottle filler, and a hard-wired transformer (mounted inside a wall, away from water). Not intended for freeze-resistant models.

Manufacturer: Haws, Manufacturer Part Number : 1RKHO.PThe Haws 1RKHO.P sensor retrofit kit includes an electric solenoid valve controlled by a sensor that will convert most Haws standard push button operated wall-mounted single station drinking fountains, and 1920 bottle fillers to be touchless, which allows these products to be operated hands-free. Each kit contains a touchless, motion activated sensor that activates a stainless steel solenoid valve to start the flow of water, a valve regulator to control the amount of water delivered to the fountain or bottle filler, and a plug-in transformer (mounted inside a wall, away from water). Not intended for freeze-resistant models.

Manufacturer: Haws, Manufacturer Part Number : 2RKHO.HThe Haws 2RKHO.H sensor retrofit kit includes two electric solenoid valves controlled by sensors that will convert most Haws standard push button operated wall-mounted dual station drinking fountains, or a single fountain-1920 bottle filler combination to be a touchless system which allows these products to be operated hands-free. Each kit contains touchless, motion activated sensors that activates stainless steel solenoid valves to start the flow of water, valve regulators to control the amount of water delivered to the fountain or bottle filler, and a hard-wired in transformer (mounted inside a wall, away from water). Not intended for freeze-resistant models.

Manufacturer: Haws, Manufacturer Part Number : 2RKHO.PThe Haws 2RKHO.H sensor retrofit kit includes electric solenoid valves controlled by sensors that will convert most Haws standard push button operated wall-mounted dual station drinking fountains, or a single fountain-1920 bottle filler combination to be a touchless system which allows these products to be operated hands-free. Each kit contains touchless, motion activated sensors that activate stainless steel solenoid valves to start the flow of water, valve regulators to control the amount of water delivered to the fountain or bottle filler, and a plug-in transformer (mounted inside a wall, away from water).

Manufacturer: Haws, Manufacturer Part Number : 3RKHO.HThe Haws 3RKHO.H sensor retrofit kit includes electric solenoid valves controlled by sensors that will convert most Haws standard push button operated wall-mounted dual station drinking fountains and the 1920 bottle filler combination to be a touchless system which allows these products to be operated hands-free. Each kit contains touchless, motion activated sensors that activate stainless steel solenoid valves to start the flow of water, valve regulators to control the amount of water delivered to the fountain or bottle filler, and a hard-wired in transformer (mounted inside a wall, away from water).

Manufacturer: Haws, Manufacturer Part Number : 3RKHO.PThe Haws 3RKHO.P sensor retrofit kit includes electric solenoid valves controlled by sensors that will convert most Haws standard push button operated wall-mounted dual station drinking fountains and the 1920 bottle filler combination to be a touchless system which allows these products to be operated hands-free. Each kit contains touchless, motion activated sensors that activate stainless steel solenoid valves to start the flow of water, valve regulators to control the amount of water delivered to the fountain or bottle filler, and a plug-in transformer (mounted inside a wall, away from water).

Manufacturer: Haws, Manufacturer Part Number : SK1Model SK1 is a wrap around matching satin finish stainless steel cane touch skirt for installation on the high unit in some applications that may need to comply with ADA protruding objects guidelines. For use on Models 1119 and H1119.8

Manufacturer: Haws, Manufacturer Part Number : SK3Model SK3 is a wrap around satin finish stainless steel cane touch skirt for installation on the high unit in some applications that may need to comply with ADA protruding objects guidelines. For use on Models Haws 1011 and H1011 series fountains.