Vestil

Manufacturer: Vestil, Manufacturer Part Number: VPFG-1085Usable Width (Feet): 8 to 10, Collapsed Height (Feet): 8 1/2, In Use Height (Feet): 8 – Galvanized Folding Gate – Secure outside access during the day and add security at night with heavy–duty 15 gauge steel folding gates. Durable 3" rubber casters allow operator to quickly and fully retract gate when not in use. Center drop pin rests in pre–drilled hole to secure gate when extended. Easy installation! Lock is located on right side on single gates. Galvanized for durability. Constructed of steel U–channels riveted back to back using aircraft quality rivets and heavy–duty 1–1/2" x 1–1/2" vertical angles. Installation hardware included. Contact factory for additional sizes.

Manufacturer: Vestil, Manufacturer Part Number: VSSG-485Usable Width (Feet): 3 to 4, Collapsed Height (Feet): 8 1/2, In Use Height (Feet): 8 – Galvanized Folding Gate – Secure outside access during the day and add security at night with heavy–duty 15 gauge steel folding gates. Durable 3" rubber casters allow operator to quickly and fully retract gate when not in use. Center drop pin rests in pre–drilled hole to secure gate when extended. Easy installation! Lock is located on right side on single gates. Galvanized for durability. Constructed of steel U–channels riveted back to back using aircraft quality rivets and heavy–duty 1–1/2" x 1–1/2" vertical angles. Installation hardware included. Contact factory for additional sizes.

Manufacturer: Vestil, Manufacturer Part Number: VSSG-585Usable Width (Feet): 4 to 5, Collapsed Height (Feet): 8 1/2, In Use Height (Feet): 8 – Galvanized Folding Gate – Secure outside access during the day and add security at night with heavy–duty 15 gauge steel folding gates. Durable 3" rubber casters allow operator to quickly and fully retract gate when not in use. Center drop pin rests in pre–drilled hole to secure gate when extended. Easy installation! Lock is located on right side on single gates. Galvanized for durability. Constructed of steel U–channels riveted back to back using aircraft quality rivets and heavy–duty 1–1/2" x 1–1/2" vertical angles. Installation hardware included. Contact factory for additional sizes.

Manufacturer: Vestil, Manufacturer Part Number: VSSG-685Usable Width (Feet): 5 to 6, Collapsed Height (Feet): 8 1/2, In Use Height (Feet): 8 Galvanized Folding Gate Secure outside access during the day and add security at night with heavyduty 15 gauge steel folding gates. Durable 3" rubber casters allow operator to quickly and fully retract gate when not in use. Center drop pin rests in predrilled hole to secure gate when extended. Easy installation! Lock is located on right side on single gates. Galvanized for durability. Constructed of steel Uchannels riveted back to back using aircraft quality rivets and heavyduty 11/2" x 11/2" vertical angles. Installation hardware included. Contact factory for additional sizes.

Manufacturer: Vestil, Manufacturer Part Number: VSSG-785Usable Width (Feet): 6 to 7, Collapsed Height (Feet): 8 1/2, In Use Height (Feet): 8 – Galvanized Folding Gate – Secure outside access during the day and add security at night with heavy–duty 15 gauge steel folding gates. Durable 3" rubber casters allow operator to quickly and fully retract gate when not in use. Center drop pin rests in pre–drilled hole to secure gate when extended. Easy installation! Lock is located on right side on single gates. Galvanized for durability. Constructed of steel U–channels riveted back to back using aircraft quality rivets and heavy–duty 1–1/2" x 1–1/2" vertical angles. Installation hardware included. Contact factory for additional sizes.

Manufacturer: Vestil, Manufacturer Part Number: VSSG-885Usable Width (Feet): 7 to 8, Collapsed Height (Feet): 8 1/2, In Use Height (Feet): 8 – Galvanized Folding Gate – Secure outside access during the day and add security at night with heavy–duty 15 gauge steel folding gates. Durable 3" rubber casters allow operator to quickly and fully retract gate when not in use. Center drop pin rests in pre–drilled hole to secure gate when extended. Easy installation! Lock is located on right side on single gates. Galvanized for durability. Constructed of steel U–channels riveted back to back using aircraft quality rivets and heavy–duty 1–1/2" x 1–1/2" vertical angles. Installation hardware included. Contact factory for additional sizes.

Manufacturer: Vestil, Manufacturer Part Number: VSSG-1080Usable Width (Feet): 9 to 10, Collapsed Height (Feet): 8 1/2, In Use Height (Feet): 8 – Galvanized Folding Gate – Secure outside access during the day and add security at night with heavy–duty 15 gauge steel folding gates. Durable 3" rubber casters allow operator to quickly and fully retract gate when not in use. Center drop pin rests in pre–drilled hole to secure gate when extended. Easy installation! Lock is located on right side on single gates. Galvanized for durability. Constructed of steel U–channels riveted back to back using aircraft quality rivets and heavy–duty 1–1/2" x 1–1/2" vertical angles. Installation hardware included. Contact factory for additional sizes.

Manufacturer: Vestil, Manufacturer Part Number: VD-81Maximum Height (when collapsed): 81", Maximum Width: 42" – Galvanized Door Scissor Gates – Prevent access to rooms with standard pedestrian Door Scissor Gates. Ideal for department store door openings, offices, warehouse inventory rooms, etc. Steel construction. Installation hardware not included.

Manufacturer: Vestil, Manufacturer Part Number: VD-83Maximum Height (when collapsed): 83", Maximum Width: 42" – Galvanized Door Scissor Gates – Prevent access to rooms with standard pedestrian Door Scissor Gates. Ideal for department store door openings, offices, warehouse inventory rooms, etc. Steel construction. Installation hardware not included.

Manufacturer: Vestil, Manufacturer Part Number: FE-4-84Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips. Steel retaining strap (loop style*) prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. 84" Length.

Manufacturer: Vestil, Manufacturer Part Number: FE-5-84Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips. Steel retaining strap (loop style*) prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. 84" Length.

Manufacturer: Vestil, Manufacturer Part Number: FE-6-84Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips. Steel retaining strap (loop style*) prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. 84" Length.

Manufacturer: Vestil, Manufacturer Part Number: FE-4-84-PAccommodates Fork Width: 4", Fork Extension Inside Width: 4", Length: 84", Maximum Fork Thickness: 2", Style: Pin – Fork Extensions – Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. Pin Style: Remove pin and lay extension over fork or drive fork into the extension. Re–insert the pin behind the heel of the fork to secure extension.

Manufacturer: Vestil, Manufacturer Part Number: FE-5-84-PMaximum capacity is 4,000 pounds evenly distributed. Pin Style: Remove pin and lay extension over fork or drive fork into the extension. Re–insert the pin behind the heel of the fork to secure extension.

Manufacturer: Vestil, Manufacturer Part Number: FE-6-84-PAccommodates Fork Width: 6", Fork Extension Inside Width: 6", Length: 84", Maximum Fork Thickness: 2", Style: Pin – Fork Extensions – Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. Pin Style: Remove pin and lay extension over fork or drive fork into the extension. Re–insert the pin behind the heel of the fork to secure extension.

Manufacturer: Vestil, Manufacturer Part Number: CJIB-3Under I–Beam to Ground: 84", I–Beam Usable Length: 54", I–Beam (Flange x Height): 2.66" x 4", Capacity (Pounds): 300 – Mini Overhead Cantilever Jibs – Utilize this unique jib in work cells and work areas. Unique fixed–height design allows for outriggers to be mounted underneath a work bench. Easily lift product from cart to workbench. Straddle width is 48" (ID). Hoist and trolley can be ordered separately. Steel construction.

Manufacturer: Vestil, Manufacturer Part Number: CJIB-6Under I–Beam to Ground: 84", I–Beam Usable Length: 54", I–Beam (Flange x Height): 2.66" x 4", Capacity (Pounds): 600 – Mini Overhead Cantilever Jibs – Utilize this unique jib in work cells and work areas. Unique fixed–height design allows for outriggers to be mounted underneath a work bench. Easily lift product from cart to workbench. Straddle width is 48" (ID). Hoist and trolley can be ordered separately. Steel construction.

Manufacturer: Vestil, Manufacturer Part Number: WL-100-10-710Capacity: 10,000 lbs., Platform Size: 84" x 120", Lowered Height: 14", Raised Height: 72", Overall Frame Size: 62" x 118" – Electric–Hydraulic Scissor Dock – Save time and reduce man–hours where there are no docks. Pit or surface mount with the optional approach ramp. Engineered and designed for maximum safety and efficiency. Checkered plate deck is made of heavy gauge steel for years of use. Hydraulic cylinders feature emergency velocity fuse if line breaks. Complete with upper travel limit switch and overload relief valve. Push–button control is 24V AC on a 20 foot long coil cord. Prewired control box includes magnetic starter and overload fuse. High visibility removable handrails with fixed toeboards are standard. Includes beveled toe–guards and electric toe–guards around perimeter of platform. External 6.5 HP 208–230/460V, 3–phase, 60 Hz motor may be located up to 8 feet away from lift. OSHA and ANSI compliant.

Manufacturer: Vestil, Manufacturer Part Number: WL-100-12-710Capacity: 12,000 lbs., Platform Size: 84" x 120", Lowered Height: 14", Raised Height: 72", Overall Frame Size: 62" x 118" – Electric–Hydraulic Scissor Dock – Save time and reduce man–hours where there are no docks. Pit or surface mount with the optional approach ramp. Engineered and designed for maximum safety and efficiency. Checkered plate deck is made of heavy gauge steel for years of use. Hydraulic cylinders feature emergency velocity fuse if line breaks. Complete with upper travel limit switch and overload relief valve. Push–button control is 24V AC on a 20 foot long coil cord. Prewired control box includes magnetic starter and overload fuse. High visibility removable handrails with fixed toeboards are standard. Includes beveled toe–guards and electric toe–guards around perimeter of platform. External 6.5 HP 208–230/460V, 3–phase, 60 Hz motor may be located up to 8 feet away from lift. OSHA and ANSI compliant.

Manufacturer: Vestil, Manufacturer Part Number: WL-100-5-710Capacity: 5,000 lbs., Platform Size: 84" x 120", Lowered Height: 8", Raised Height: 68", Overall Frame Size: 62" x 93" – Electric–Hydraulic Scissor Dock – Save time and reduce man–hours where there are no docks. Pit or surface mount with the optional approach ramp. Engineered and designed for maximum safety and efficiency. Checkered plate deck is made of heavy gauge steel for years of use. Hydraulic cylinders feature emergency velocity fuse if line breaks. Complete with upper travel limit switch and overload relief valve. Push–button control is 24V AC on a 20 foot long coil cord. Prewired control box includes magnetic starter and overload fuse. High visibility removable handrails with fixed toeboards are standard. Includes beveled toe–guards and electric toe–guards around perimeter of platform. External 6.5 HP 208–230/460V, 3–phase, 60 Hz motor may be located up to 8 feet away from lift. OSHA and ANSI compliant.

Manufacturer: Vestil, Manufacturer Part Number: WL-100-6-710Capacity: 6,000 lbs., Platform Size: 84" x 120", Lowered Height: 10", Raised Height: 70", Overall Frame Size: 62" x 93" – Electric–Hydraulic Scissor Dock – Save time and reduce man–hours where there are no docks. Pit or surface mount with the optional approach ramp. Engineered and designed for maximum safety and efficiency. Checkered plate deck is made of heavy gauge steel for years of use. Hydraulic cylinders feature emergency velocity fuse if line breaks. Complete with upper travel limit switch and overload relief valve. Push–button control is 24V AC on a 20 foot long coil cord. Prewired control box includes magnetic starter and overload fuse. High visibility removable handrails with fixed toeboards are standard. Includes beveled toe–guards and electric toe–guards around perimeter of platform. External 6.5 HP 208–230/460V, 3–phase, 60 Hz motor may be located up to 8 feet away from lift. OSHA and ANSI compliant.

Manufacturer: Vestil, Manufacturer Part Number: WL-100-8-710Capacity: 8,000 lbs., Platform Size: 84" x 120", Lowered Height: 10", Raised Height: 70", Overall Frame Size: 62" x 118" – Electric–Hydraulic Scissor Dock – Save time and reduce man–hours where there are no docks. Pit or surface mount with the optional approach ramp. Engineered and designed for maximum safety and efficiency. Checkered plate deck is made of heavy gauge steel for years of use. Hydraulic cylinders feature emergency velocity fuse if line breaks. Complete with upper travel limit switch and overload relief valve. Push–button control is 24V AC on a 20 foot long coil cord. Prewired control box includes magnetic starter and overload fuse. High visibility removable handrails with fixed toeboards are standard. Includes beveled toe–guards and electric toe–guards around perimeter of platform. External 6.5 HP 208–230/460V, 3–phase, 60 Hz motor may be located up to 8 feet away from lift. OSHA and ANSI compliant.

Manufacturer: Vestil, Manufacturer Part Number: BTA-06008436Size (W x L): 84" x 36", Ht. Difference (8°/17%): 4", Ht. Difference (11°/19%): 5", Capacity: 6,000 lbs – Aluminum Truck Dockboards with Welded Aluminum Curbs – Engineered and built to maximize safety while handling heavy fork trucks and loads. Locking legs prevent movement during loading and unloading operations. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Bend is 11° and 9" from the edge and the legs are 12" from the edge. Manufactured in compliance with OSHA.

Manufacturer: Vestil, Manufacturer Part Number: BTA-06008448Size (W x L): 84" x 48", Ht. Difference (8°/17%): 5", Ht. Difference (11°/19%): 7", Capacity: 6,000 lbs – Aluminum Truck Dockboards with Welded Aluminum Curbs – Engineered and built to maximize safety while handling heavy fork trucks and loads. Locking legs prevent movement during loading and unloading operations. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Bend is 11° and 9" from the edge and the legs are 12" from the edge. Manufactured in compliance with OSHA.