Valley Craft – Page 20 – Spill 911 Inc.

Valley Craft Valley Craft Drum Lift & Rotator - Fully Powered Lift/Rotate/Drive, Grip Connection, Straddle, 78"H, 1000 lb. Capacity $20,754.43

Manufacturer: Valley Craft, Manufacturer Part Number: F80144A7Valley Craft’s 78” Fully Powered Drum Lifts and Rotators simplify the lifting, rotating and transporting of drums by utilizing power. Drums lift up to 71” in height in less than 3 seconds, rotate up to 36° continuously in either direction at 6 RPM, and drive up to 2.5 MPH. Compatible with all drum styles (steel, plastic and fiber), drum handling and maneuvering has never been easier. Power source is a 24V system featuring (2) 12V DC batteries and an AC charger (included) that plugs into any standard outlet using an extension cord (not included). This premium system includes an adjustable drive system of 1-2.5 MPH (default set to 2.5 MPH) and an ergonomic Curtis TM-1 Tiller head for simple handling. Tiller handle features keyed on/off, reverse, adjustable throttle, rocker switches, horn and a battery indicator light. The Grip configuration (Roto-Grip) combines jaws with a hydraulic actuator to grab drums (18-28”), requiring no manual assistance. This hydraulic actuator has an adjustable pressure gauge to help ensure the appropriate amount of pressure is applied to secure your unit without damaging it. With a 1, lb. capacity it is simple to maneuver units on (2) 6” front rigid casters and (1) 12” rear power drive wheel. Designed as a standalone lift and rotator, forklift assistance is not required. Standard straddle units have extended front legs that go under pallets/shelving or on the outside of the drums when being handled. Optional floor locks are available (sold separately). Valley Craft’s Fully Powered Drum Lifts and Rotators improve the safety and productivity of any facility that is lifting, rotating, and transporting drums by eliminating the need for heavy manual assistance. Constructed of heavy gauge steel with a premium powder coat paint finish in green, you can be confident these units are built to last. All products are shipped fully assembled, ready-to-use, and are made in the U.S.A.

Valley Craft Valley Craft Drum Lift & Rotator - Fully Powered Lift/Rotate/Drive, Grip Connection, Straddle, 90"H, 1000 lb. Capacity $21,260.76

Manufacturer: Valley Craft, Manufacturer Part Number: F80143A6Valley Craft’s 9” Fully Powered Drum Lifts and Rotators simplify the lifting, rotating and transporting of drums by utilizing power. Drums lift up to 84” in height in less than 3 seconds, rotate up to 36° continuously in either direction at 6 RPM, and drive up to 2.5 MPH. Compatible with all drum styles (steel, plastic and fiber), drum handling and maneuvering has never been easier. Power source is a 24V system featuring (2) 12V DC batteries and an AC charger (included) that plugs into any standard outlet using an extension cord (not included). This premium system includes an adjustable drive system of 1-2.5 MPH (default set to 2.5 MPH) and an ergonomic Curtis TM-1 Tiller head for simple handling. Tiller handle features keyed on/off, reverse, adjustable throttle, rocker switches, horn and a battery indicator light. The Grip configuration (Roto-Grip) combines jaws with a hydraulic actuator to grab drums (18-28”), requiring no manual assistance. This hydraulic actuator has an adjustable pressure gauge to help ensure the appropriate amount of pressure is applied to secure your unit without damaging it. With a 1, lb. capacity it is simple to maneuver units on (2) 6” front rigid casters and (1) 12” rear power drive wheel. Designed as a standalone lift and rotator, forklift assistance is not required. Standard straddle units have extended front legs that go under pallets/shelving or on the outside of the drums when being handled. Optional floor locks are available (sold separately). Valley Craft’s Fully Powered Drum Lifts and Rotators improve the safety and productivity of any facility that is lifting, rotating, and transporting drums by eliminating the need for heavy manual assistance. Constructed of heavy gauge steel with a premium powder coat paint finish in green, you can be confident these units are built to last. All products are shipped fully assembled, ready-to-use, and are made in the U.S.A.

Valley Craft Valley Craft Drum Lift & Rotator - Fully Powered Lift/Rotate/Drive, Strap Connection, Counterweighted, 78"H, 1000 lb. Capacity $18,475.95

Manufacturer: Valley Craft, Manufacturer Part Number: F89832A5Valley Craft’s 78” Fully Powered Drum Lifts and Rotators simplify the lifting, rotating and transporting of drums by utilizing power. Drums lift up to 71” in height in less than 3 seconds, rotate up to 36° continuously in either direction at 6 RPM, and drive up to 2.5 MPH. Compatible with all drum styles (steel, plastic and fiber), drum handling and maneuvering has never been easier. Power source is a 24V system featuring (2) 12V DC batteries and an AC charger (included) that plugs into any standard outlet using an extension cord (not included). This premium system includes an adjustable drive system of 1-2.5 MPH (default set to 2.5 MPH) and an ergonomic Curtis TM-1 Tiller head for simple handling. Tiller handle features keyed on/off, reverse, adjustable throttle, rocker switches, horn and a battery indicator light. The Strap configuration (Roto-Lift) utilizes the included straps to safely secure drums (14-24”). This hydraulic actuator has an adjustable pressure gauge to help ensure the appropriate amount of pressure is applied to secure your unit without damaging it. With a 1, lb. capacity it is simple to maneuver units on (2) 6” front rigid casters and (1) 12” rear power drive wheel. Designed as a standalone lift and rotator, forklift assistance is not required. Counter-weighted models improve handling with the ability to butt directly up to pallets, shelving, or other units without having to worry about extended straddle legs getting in the way. Optional floor locks are available (sold separately). Valley Craft’s Fully Powered Drum Lifts and Rotators improve the safety and productivity of any facility that is lifting, rotating, and transporting drums by eliminating the need for heavy manual assistance. Constructed of heavy gauge steel with a premium powder coat paint finish in green, you can be confident these units are built to last. All products are shipped fully assembled, ready-to-use, and are made in the U.S.A.

Valley Craft Valley Craft Drum Lift & Rotator - Fully Powered Lift/Rotate/Drive, Strap Connection, Counterweighted, 90"H, 1000 lb. Capacity $18,830.38

Manufacturer: Valley Craft, Manufacturer Part Number: F89831A4Valley Craft’s 9” Fully Powered Drum Lifts and Rotators simplify the lifting, rotating and transporting of drums by utilizing power. Drums lift up to 84” in height in less than 3 seconds, rotate up to 36° continuously in either direction at 6 RPM, and drive up to 2.5 MPH. Compatible with all drum styles (steel, plastic and fiber), drum handling and maneuvering has never been easier. Power source is a 24V system featuring (2) 12V DC batteries and an AC charger (included) that plugs into any standard outlet using an extension cord (not included). This premium system includes an adjustable drive system of 1-2.5 MPH (default set to 2.5 MPH) and an ergonomic Curtis TM-1 Tiller head for simple handling. Tiller handle features keyed on/off, reverse, adjustable throttle, rocker switches, horn and a battery indicator light. The Strap configuration (Roto-Lift) utilizes the included straps to safely secure drums (14-24”). This hydraulic actuator has an adjustable pressure gauge to help ensure the appropriate amount of pressure is applied to secure your unit without damaging it. With a 1, lb. capacity it is simple to maneuver units on (2) 6” front rigid casters and (1) 12” rear power drive wheel. Designed as a standalone lift and rotator, forklift assistance is not required. Counter-weighted models improve handling with the ability to butt directly up to pallets, shelving, or other units without having to worry about extended straddle legs getting in the way. Optional floor locks are available (sold separately). Valley Craft’s Fully Powered Drum Lifts and Rotators improve the safety and productivity of any facility that is lifting, rotating, and transporting drums by eliminating the need for heavy manual assistance. Constructed of heavy gauge steel with a premium powder coat paint finish in green, you can be confident these units are built to last. All products are shipped fully assembled, ready-to-use, and are made in the U.S.A.

Valley Craft Valley Craft Drum Lift & Rotator - Fully Powered Lift/Rotate/Drive, Strap Connection, Straddle, 78"H, 1000 lb. Capacity $16,703.80

Manufacturer: Valley Craft, Manufacturer Part Number: F89838A2Valley Craft’s 78” Fully Powered Drum Lifts and Rotators simplify the lifting, rotating and transporting of drums by utilizing power. Drums lift up to 71” in height in less than 3 seconds, rotate up to 36° continuously in either direction at 6 RPM, and drive up to 2.5 MPH. Compatible with all drum styles (steel, plastic and fiber), drum handling and maneuvering has never been easier. Power source is a 24V system featuring (2) 12V DC batteries and an AC charger (included) that plugs into any standard outlet using an extension cord (not included). This premium system includes an adjustable drive system of 1-2.5 MPH (default set to 2.5 MPH) and an ergonomic Curtis TM-1 Tiller head for simple handling. Tiller handle features keyed on/off, reverse, adjustable throttle, rocker switches, horn and a battery indicator light. The Strap configuration (Roto-Lift) utilizes the included straps to safely secure drums (14-24”). This hydraulic actuator has an adjustable pressure gauge to help ensure the appropriate amount of pressure is applied to secure your unit without damaging it. With a 1, lb. capacity it is simple to maneuver units on (2) 6” front rigid casters and (1) 12” rear power drive wheel. Designed as a standalone lift and rotator, forklift assistance is not required. Standard straddle units have extended front legs that go under pallets/shelving or on the outside of the drums when being handled. Optional floor locks are available (sold separately). Valley Craft’s Fully Powered Drum Lifts and Rotators improve the safety and productivity of any facility that is lifting, rotating, and transporting drums by eliminating the need for heavy manual assistance. Constructed of heavy gauge steel with a premium powder coat paint finish in green, you can be confident these units are built to last. All products are shipped fully assembled, ready-to-use, and are made in the U.S.A.

Valley Craft Valley Craft Drum Lift & Rotator - Fully Powered Lift/Rotate/Drive, Strap Connection, Straddle, 90"H, 1000 lb. Capacity $17,210.13

Manufacturer: Valley Craft, Manufacturer Part Number: F89837A1Valley Craft’s 9” Fully Powered Drum Lifts and Rotators simplify the lifting, rotating and transporting of drums by utilizing power. Drums lift up to 84” in height in less than 3 seconds, rotate up to 36° continuously in either direction at 6 RPM, and drive up to 2.5 MPH. Compatible with all drum styles (steel, plastic and fiber), drum handling and maneuvering has never been easier. Power source is a 24V system featuring (2) 12V DC batteries and an AC charger (included) that plugs into any standard outlet using an extension cord (not included). This premium system includes an adjustable drive system of 1-2.5 MPH (default set to 2.5 MPH) and an ergonomic Curtis TM-1 Tiller head for simple handling. Tiller handle features keyed on/off, reverse, adjustable throttle, rocker switches, horn and a battery indicator light. The Strap configuration (Roto-Lift) utilizes the included straps to safely secure drums (14-24”). This hydraulic actuator has an adjustable pressure gauge to help ensure the appropriate amount of pressure is applied to secure your unit without damaging it. With a 1, lb. capacity it is simple to maneuver units on (2) 6” front rigid casters and (1) 12” rear power drive wheel. Designed as a standalone lift and rotator, forklift assistance is not required. Standard straddle units have extended front legs that go under pallets/shelving or on the outside of the drums when being handled. Optional floor locks are available (sold separately). Valley Craft’s Fully Powered Drum Lifts and Rotators improve the safety and productivity of any facility that is lifting, rotating, and transporting drums by eliminating the need for heavy manual assistance. Constructed of heavy gauge steel with a premium powder coat paint finish in green, you can be confident these units are built to last. All products are shipped fully assembled, ready-to-use, and are made in the U.S.A.

Valley Craft Valley Craft Drum Lift & Rotator, Deluxe Telescopic - Fully Powered Lift/Rotate/Drive, Grip Connection, Counterweighted, 59-94"H, 1000 lb. Capacity $26,324.05

Manufacturer: Valley Craft, Manufacturer Part Number: F89529Valley Craft’s Telescoping Fully Powered Drum Lift and Rotator, Roto-Grip, simplifies the lifting, rotating and transporting of drums by utilizing power. A telescoping mast has the added benefit of offering the largest height (94”) while also being able to retract to be the most compact position (59”) to fit under doorways or in tight spaces. Powered clamp and fully lift in less than 3 seconds, 36° continuously rotate in either direction at 6 RPM, and drive up to 2.5 MPH. Compatible with all drum styles (steel, plastic and fiber), drum handling and maneuvering has never been easier. The Grip configuration combines jaws with a hydraulic actuator to grab drums (18-28”), and has an adjustable pressure gauge to ensure a secure grip. With a 1, lb. capacity it is simple to maneuver this unit on (2) 6” front rigid casters and (1) 12” rear power drive wheel. The counter-weighted design improves handling with the ability to butt directly up to pallets, shelving, or other units without having to worry about extended straddle legs getting in the way. Optional floor locks are available (sold separately). Power source is a 24V system featuring (2) 12V DC batteries and an AC charger (included) that plugs into any standard outlet using an extension cord (not included). This premium system includes an adjustable drive system of 1-2.5 MPH (default set to 2.5 MPH) and an ergonomic Curtis TM-1 Tiller head for simple handling. Tiller handle features keyed on/off, reverse, adjustable throttle, rocker switches, horn and a battery indicator light. Designed as a standalone lift and rotator, forklift assistance is not required. Valley Craft’s Telescoping Fully Powered Drum Lift and Rotator improves the safety and productivity of any facility that is lifting, rotating, and transporting drums. Constructed of heavy gauge steel with a premium powder coat paint finish in green, you can be confident these units are built to last. All products are shipped fully assembled, ready-to-use, and are made in the U.S.A.

Valley Craft Valley Craft Electronic Locking Cabinet, Deluxe - 36"W X 24"D X 78"H, Louvered Door Panels, (3) Shelves, 1000 lb. Capacity/Shelf, 14 Gauge, Black $1,914.67

Manufacturer: Valley Craft, Manufacturer Part Number: F89358BKValley Craft’s 36 x 24 x 78” Deluxe Electronic Locking Cabinets provide users peace of mind by allowing them to secure tools and other valuables without the need for a physical key. Premium Digilock® technology with a thick 1/2” steel deadbolt is combined with fully welded heavy duty 14 gauge steel to ensure these cabinets are built to last. This cabinet makes protecting, storing and finding your tools, parts and other supplies simple. Louvered bin brackets run the full-length of the interior of the doors and are used to hang plastic storage bins for convenient access to parts and supplies. Shelves are 18” deep to allow room for bins on doors to be unobstructed when closed. (3) Included shelves easily adjust on 7 3/8” increments, and have a 1, lb. capacity each. (4) leveling feet come included and help ensure balance and stability when used on uneven surfaces. Doors utilize premium full length piano hinges to maximize the stability, durability, and longevity of the cabinet. The strategically designed 3-point locking system helps keep supplies, inventory and other valuables secure. A programming bypass/master key is included. Additional accessories are sold separately. Valley Craft’s Electronic Locking Cabinets are constructed of heavy duty 14 gauge steel, and have a premium textured powder coat paint finish in black. Products are shipped fully assembled, and made in the U.S.A.

Valley Craft Valley Craft Electronic Locking Cabinet, Deluxe - 36"W X 24"D X 78"H, Louvered Door Panels, (3) Shelves, 1000 lb. Capacity/Shelf, 14 Gauge, Silver/Black $1,914.67

Manufacturer: Valley Craft, Manufacturer Part Number: F89358SSValley Craft’s 36 x 24 x 78” Deluxe Electronic Locking Cabinets provide users peace of mind by allowing them to secure tools and other valuables without the need for a physical key. Premium Digilock® technology with a thick 1/2” steel deadbolt is combined with fully welded heavy duty 14 gauge steel to ensure these cabinets are built to last. This cabinet makes protecting, storing and finding your tools, parts and other supplies simple. Louvered bin brackets run the full-length of the interior of the doors and are used to hang plastic storage bins for convenient access to parts and supplies. Shelves are 18” deep to allow room for bins on doors to be unobstructed when closed. (3) Included shelves easily adjust on 7 3/8” increments, and have a 1, lb. capacity each. (4) leveling feet come included and help ensure balance and stability when used on uneven surfaces. Doors utilize premium full length piano hinges to maximize the stability, durability, and longevity of the cabinet. The strategically designed 3-point locking system helps keep supplies, inventory and other valuables secure. A programming bypass/master key is included. Additional accessories are sold separately. Valley Craft’s Electronic Locking Cabinets are constructed of heavy duty 14 gauge steel, and have a premium textured powder coat paint finish in black with silver doors. Products are shipped fully assembled, and made in the U.S.A.

Valley Craft Valley Craft Electronic Locking Cabinet, Deluxe - 36"W X 24"D X 78"H, Louvered Door Panels, (3) Shelves, 1000 lb. Capacity/Shelf, 14 Gauge, White $1,914.67

Manufacturer: Valley Craft, Manufacturer Part Number: F89358WWValley Craft’s 36 x 24 x 78” Deluxe Electronic Locking Cabinets provide users peace of mind by allowing them to secure tools and other valuables without the need for a physical key. Premium Digilock® technology with a thick 1/2” steel deadbolt is combined with fully welded heavy duty 14 gauge steel to ensure these cabinets are built to last. This cabinet makes protecting, storing and finding your tools, parts and other supplies simple. Louvered bin brackets run the full-length of the interior of the doors and are used to hang plastic storage bins for convenient access to parts and supplies. Shelves are 18” deep to allow room for bins on doors to be unobstructed when closed. (3) Included shelves easily adjust on 7 3/8” increments, and have a 1, lb. capacity each. (4) leveling feet come included and help ensure balance and stability when used on uneven surfaces. Doors utilize premium full length piano hinges to maximize the stability, durability, and longevity of the cabinet. The strategically designed 3-point locking system helps keep supplies, inventory and other valuables secure. A programming bypass/master key is included. Additional accessories are sold separately. Valley Craft’s Electronic Locking Cabinets are constructed of heavy duty 14 gauge steel, and have a premium textured powder coat paint finish in white. Products are shipped fully assembled, and made in the U.S.A.

Valley Craft Valley Craft Electronic Locking Cabinet, Deluxe - 36"W X 24"D X 78"H, Louvered Door Panels, (3) Shelves, 1000 lb. Capacity/Shelf, 14 Gauge,Red/Black $1,914.67

Manufacturer: Valley Craft, Manufacturer Part Number: F89358RRValley Craft’s 36 x 24 x 78” Deluxe Electronic Locking Cabinets provide users peace of mind by allowing them to secure tools and other valuables without the need for a physical key. Premium Digilock® technology with a thick 1/2” steel deadbolt is combined with fully welded heavy duty 14 gauge steel to ensure these cabinets are built to last. This cabinet makes protecting, storing and finding your tools, parts and other supplies simple. Louvered bin brackets run the full-length of the interior of the doors and are used to hang plastic storage bins for convenient access to parts and supplies. Shelves are 18” deep to allow room for bins on doors to be unobstructed when closed. (3) Included shelves easily adjust on 7 3/8” increments, and have a 1, lb. capacity each. (4) leveling feet come included and help ensure balance and stability when used on uneven surfaces. Doors utilize premium full length piano hinges to maximize the stability, durability, and longevity of the cabinet. The strategically designed 3-point locking system helps keep supplies, inventory and other valuables secure. A programming bypass/master key is included. Additional accessories are sold separately. Valley Craft’s Electronic Locking Cabinets are constructed of heavy duty 14 gauge steel, and have a premium textured powder coat paint finish in black with red doors. Products are shipped fully assembled, and made in the U.S.A.

Valley Craft Valley Craft Electronic Locking Cabinet, Deluxe - 48"W X 24"D X 78"H, Louvered Door Panels, (3) Shelves, 1000 lb. Capacity/Shelf, 14 Gauge, Black $2,205.26

Manufacturer: Valley Craft, Manufacturer Part Number: F89356BKValley Craft’s 48 x 24 x 78” Deluxe Electronic Locking Cabinets provide users peace of mind by allowing them to secure tools and other valuables without the need for a physical key. Premium Digilock® technology with a thick 1/2” steel deadbolt is combined with fully welded heavy duty 14 gauge steel to ensure these cabinets are built to last. This cabinet makes protecting, storing and finding your tools, parts and other supplies simple. Louvered bin brackets run the full-length of the interior of the doors and are used to hang plastic storage bins for convenient access to parts and supplies. Shelves are 18” deep to allow room for bins on doors to be unobstructed when closed. (3) Included shelves easily adjust on 7 3/8” increments, and have a 1, lb. capacity each. (4) leveling feet come included and help ensure balance and stability when used on uneven surfaces. Doors utilize premium full length piano hinges to maximize the stability, durability, and longevity of the cabinet. The strategically designed 3-point locking system helps keep supplies, inventory and other valuables secure. A programming bypass/master key is included. Additional accessories are sold separately. Valley Craft’s Electronic Locking Cabinets are constructed of heavy duty 14 gauge steel, and have a premium textured powder coat paint finish in black. Products are shipped fully assembled, and made in the U.S.A.

Valley Craft Valley Craft Electronic Locking Cabinet, Deluxe - 48"W X 24"D X 78"H, Louvered Door Panels, (3) Shelves, 1000 lb. Capacity/Shelf, 14 Gauge, Silver/Black $2,205.26

Manufacturer: Valley Craft, Manufacturer Part Number: F89356SSValley Craft’s 48 x 24 x 78” Deluxe Electronic Locking Cabinets provide users peace of mind by allowing them to secure tools and other valuables without the need for a physical key. Premium Digilock® technology with a thick 1/2” steel deadbolt is combined with fully welded heavy duty 14 gauge steel to ensure these cabinets are built to last. This cabinet makes protecting, storing and finding your tools, parts and other supplies simple. Louvered bin brackets run the full-length of the interior of the doors and are used to hang plastic storage bins for convenient access to parts and supplies. Shelves are 18” deep to allow room for bins on doors to be unobstructed when closed. (3) Included shelves easily adjust on 7 3/8” increments, and have a 1, lb. capacity each. (4) leveling feet come included and help ensure balance and stability when used on uneven surfaces. Doors utilize premium full length piano hinges to maximize the stability, durability, and longevity of the cabinet. The strategically designed 3-point locking system helps keep supplies, inventory and other valuables secure. A programming bypass/master key is included. Additional accessories are sold separately. Valley Craft’s Electronic Locking Cabinets are constructed of heavy duty 14 gauge steel, and have a premium textured powder coat paint finish in black with silver doors. Products are shipped fully assembled, and made in the U.S.A.

Valley Craft Valley Craft Electronic Locking Cabinet, Deluxe - 48"W X 24"D X 78"H, Louvered Door Panels, (3) Shelves, 1000 lb. Capacity/Shelf, 14 Gauge, White $2,205.26

Manufacturer: Valley Craft, Manufacturer Part Number: F89356WWValley Craft’s 48 x 24 x 78” Deluxe Electronic Locking Cabinets provide users peace of mind by allowing them to secure tools and other valuables without the need for a physical key. Premium Digilock® technology with a thick 1/2” steel deadbolt is combined with fully welded heavy duty 14 gauge steel to ensure these cabinets are built to last. This cabinet makes protecting, storing and finding your tools, parts and other supplies simple. Louvered bin brackets run the full-length of the interior of the doors and are used to hang plastic storage bins for convenient access to parts and supplies. Shelves are 18” deep to allow room for bins on doors to be unobstructed when closed. (3) Included shelves easily adjust on 7 3/8” increments, and have a 1, lb. capacity each. (4) leveling feet come included and help ensure balance and stability when used on uneven surfaces. Doors utilize premium full length piano hinges to maximize the stability, durability, and longevity of the cabinet. The strategically designed 3-point locking system helps keep supplies, inventory and other valuables secure. A programming bypass/master key is included. Additional accessories are sold separately. Valley Craft’s Electronic Locking Cabinets are constructed of heavy duty 14 gauge steel, and have a premium textured powder coat paint finish in white. Products are shipped fully assembled, and made in the U.S.A.

Valley Craft Valley Craft Electronic Locking Cabinet, Deluxe - 48"W X 24"D X 78"H, Louvered Door Panels, (3) Shelves, 1000 lb. Capacity/Shelf, 14 Gauge,Red/Black $2,205.26

Manufacturer: Valley Craft, Manufacturer Part Number: F89356RRValley Craft’s 48 x 24 x 78” Deluxe Electronic Locking Cabinets provide users peace of mind by allowing them to secure tools and other valuables without the need for a physical key. Premium Digilock® technology with a thick 1/2” steel deadbolt is combined with fully welded heavy duty 14 gauge steel to ensure these cabinets are built to last. This cabinet makes protecting, storing and finding your tools, parts and other supplies simple. Louvered bin brackets run the full-length of the interior of the doors and are used to hang plastic storage bins for convenient access to parts and supplies. Shelves are 18” deep to allow room for bins on doors to be unobstructed when closed. (3) Included shelves easily adjust on 7 3/8” increments, and have a 1, lb. capacity each. (4) leveling feet come included and help ensure balance and stability when used on uneven surfaces. Doors utilize premium full length piano hinges to maximize the stability, durability, and longevity of the cabinet. The strategically designed 3-point locking system helps keep supplies, inventory and other valuables secure. A programming bypass/master key is included. Additional accessories are sold separately. Valley Craft’s Electronic Locking Cabinets are constructed of heavy duty 14 gauge steel, and have a premium textured powder coat paint finish in black with red doors. Products are shipped fully assembled, and made in the U.S.A.

Valley Craft Valley Craft Electronic Locking Cabinet, Industrial - 36"W X 24"D X 78"H, (3) Shelves, 1,000 lb. Capacity/Shelf, 14 Gauge $1,701.33

Manufacturer: Valley Craft, Manufacturer Part Number: F85232A6Valley Craft’s 36 x 24 x 78” Industrial Electronic Locking Cabinets provide users peace of mind by allowing them to secure tools and other valuables without the need for a physical key. Premium Digilock® technology with a thick 1/2” steel deadbolt is combined with fully welded heavy duty 14 gauge steel to ensure these cabinets are built to last. This cabinet makes protecting, storing and finding your tools, parts and other supplies simple. (3) 22” Deep shelves are included, easily adjust on 7 3/8” increments, and have a 1, lb. capacity each. Doors utilize premium full length piano hinges to maximize the stability, durability, and longevity of the cabinet. The strategically designed 3-point locking system helps keep supplies, inventory and other valuables secure. A programming bypass/master key is included. Additional accessories are sold separately. Valley Craft’s Electronic Locking Cabinets are constructed of heavy duty 14 gauge steel, and have a premium powder coat paint finish in gray. Products are shipped fully assembled, and made in the U.S.A.

Valley Craft Valley Craft Electronic Locking Cabinet, Industrial - 48"W X 24"D X 84"H, (3) Shelves, 1,000 lb. Capacity/Shelf, 14 Gauge $2,047.37

Manufacturer: Valley Craft, Manufacturer Part Number: F85231A7Valley Craft’s 48 x 24 x 84” Industrial Electronic Locking Cabinets provide users peace of mind by allowing them to secure tools and other valuables without the need for a physical key. Premium Digilock® technology with a thick 1/2” steel deadbolt is combined with fully welded heavy duty 14 gauge steel to ensure these cabinets are built to last. This cabinet makes protecting, storing and finding your tools, parts and other supplies simple. (3) 22” Deep shelves are included, easily adjust on 7 3/8” increments, and have a 1, lb. capacity each. Doors utilize premium full length piano hinges to maximize the stability, durability, and longevity of the cabinet. The strategically designed 3-point locking system helps keep supplies, inventory and other valuables secure. A programming bypass/master key is included. Additional accessories are sold separately. Valley Craft’s Electronic Locking Cabinets are constructed of heavy duty 14 gauge steel, and have a premium powder coat paint finish in gray. Products are shipped fully assembled, and made in the U.S.A.

Valley Craft Valley Craft Forklift Attachment for Powered Self-Dumping System - used w/ Mobile Hoppers, 2000 lb. Capacity $2,942.11

Manufacturer: Valley Craft, Manufacturer Part Number: F89681Valley Craft’s Forklift Attachment for Powered Self-Dumping System is compatible with all Valley Craft Mobile Hoppers (available in 1/2 and 1 cubic yard). When used in tandem users can easily load, transport, dump, and unload multiple hoppers around their facility using just one forklift attachment. Engineered with safety and productivity in mind, this system utilizes technology that includes a hydraulic actuator paired with a forklift auxiliary circuit to provide users with complete powered control during the entire dumping and retracting process. To get started, insert the forklift forks through the fork pockets on the attachment and secure your unit to the forklift forks using the built in T-bolts. Then simply attach the included quick-connect couplers to the forklift auxiliary circuit. You are now ready to dump and retract your unit ergonomically by utilizing the convenient in-cab powered forklift controls. Mobile Hoppers easily latch by rolling them into the attachment, and easily detach using a pull cord to disengage the latch. This Powered Self-Dumping System has a 2, lb. capacity and compatible Mobile Hoppers of 1/2 and 1 cubic yard in volume. Constructed of heavy duty 14 gauge steel, all units come standard with continuous solid welds. Compatible Mobile Hoppers are leak-proof and complete with (4) 6” heavy duty phenolic casters (2 rigid, 2 swivel). While other systems often require unsafe dumping practices and only utilize a single hopper, Valley Craft’s Powered Self-Dumping System utilizes the powered Forklift Attachment combined with Mobile Hoppers to transport and dump various materials safely. By utilizing hydraulic power, you no longer need to rely on manual assistance, nor put employees in an unsafe situation. Ideal for assisting facilities in OSHA compliance (Rule29CFR191.178(m)(5)(iii)) and LEAN initiatives, this Forklift Attachment for Hydraulic Powered Self-Dumping System is complete with a powder coat paint finish in green for a premium look that holds up over time. Products are shipped fully assembled, ready-to-use, and are made in the U.S.A.

Valley Craft Valley Craft Heavy Duty Shelf Cabinet - 36"W x 18"D x 72"H, (4) Shelves, 1000 lb. Capacity/Shelf, 14 Gauge $1,381.33

Manufacturer: Valley Craft, Manufacturer Part Number: F89782A5Valley Craft’s 36 x 18 x 72”Heavy Duty Shelf Cabinets are the perfect solution for organization, storing, and protecting tools and supplies. These cabinets are built to last utilizing reinforced box-formed shelves, a zinc plated handle, 14 gauge steel, and a fully welded design. Protecting, storing, and organizing valuable tools and supplies is made simple. (4) shelves are included, easily adjustable on 7 1/2” increments, and with a 1, lb. capacity each. Doors utilize premium full length piano hinges to maximize the stability, durability, and longevity of the cabinet. The strategically designed 3-point locking system helps keep tools, supplies, inventory, and other valuables secure. Additional accessories are sold separately. Valley Craft’s Heavy Duty Shelf Cabinets are constructed of heavy duty 14 gauge steel, fully welded, and have a premium powder coat paint finish in gray. Products are shipped fully assembled, and made in the U.S.A.

Valley Craft Valley Craft Heavy Duty Shelf Cabinet - 36"W x 18"D x 84"H, (4) Shelves, 1000 lb. Capacity/Shelf, 14 Gauge $1,488.00

Manufacturer: Valley Craft, Manufacturer Part Number: F89784A3Valley Craft’s 36 x 18 x 84”Heavy Duty Shelf Cabinets are the perfect solution for organization, storing, and protecting tools and supplies. These cabinets are built to last utilizing reinforced box-formed shelves, a zinc plated handle, 14 gauge steel, and a fully welded design. Protecting, storing, and organizing valuable tools and supplies is made simple. (4) shelves are included, easily adjustable on 7 1/2” increments, and with a 1, lb. capacity each. Doors utilize premium full length piano hinges to maximize the stability, durability, and longevity of the cabinet. The strategically designed 3-point locking system helps keep tools, supplies, inventory, and other valuables secure. Additional accessories are sold separately. Valley Craft’s Heavy Duty Shelf Cabinets are constructed of heavy duty 14 gauge steel, fully welded, and have a premium powder coat paint finish in gray. Products are shipped fully assembled, and made in the U.S.A.

Valley Craft Valley Craft Heavy Duty Shelf Cabinet - 36"W x 24"D x 72"H, (4) Shelves, 1000 lb. Capacity/Shelf, 14 Gauge $1,488.00

Manufacturer: Valley Craft, Manufacturer Part Number: F89780A7Valley Craft’s 36 x 24 x 72”Heavy Duty Shelf Cabinets are the perfect solution for organization, storing, and protecting tools and supplies. These cabinets are built to last utilizing reinforced box-formed shelves, a zinc plated handle, 14 gauge steel, and a fully welded design. Protecting, storing, and organizing valuable tools and supplies is made simple. (4) shelves are included, easily adjustable on 7 1/2” increments, and with a 1, lb. capacity each. Doors utilize premium full length piano hinges to maximize the stability, durability, and longevity of the cabinet. The strategically designed 3-point locking system helps keep tools, supplies, inventory, and other valuables secure. Additional accessories are sold separately. Valley Craft’s Heavy Duty Shelf Cabinets are constructed of heavy duty 14 gauge steel, fully welded, and have a premium powder coat paint finish in gray. Products are shipped fully assembled, and made in the U.S.A.

Valley Craft Valley Craft Heavy Duty Shelf Cabinet - 36"W x 24"D x 84"H, (4) Shelves, 1000 lb. Capacity/Shelf, 14 Gauge $1,701.33

Manufacturer: Valley Craft, Manufacturer Part Number: F89807A3Valley Craft’s 36 x 24 x 84”Heavy Duty Shelf Cabinets are the perfect solution for organization, storing, and protecting tools and supplies. These cabinets are built to last utilizing reinforced box-formed shelves, a zinc plated handle, 14 gauge steel, and a fully welded design. Protecting, storing, and organizing valuable tools and supplies is made simple. (4) shelves are included, easily adjustable on 7 1/2” increments, and with a 1, lb. capacity each. Doors utilize premium full length piano hinges to maximize the stability, durability, and longevity of the cabinet. The strategically designed 3-point locking system helps keep tools, supplies, inventory, and other valuables secure. Additional accessories are sold separately. Valley Craft’s Heavy Duty Shelf Cabinets are constructed of heavy duty 14 gauge steel, fully welded, and have a premium powder coat paint finish in gray. Products are shipped fully assembled, and made in the U.S.A.

Valley Craft Valley Craft Heavy Duty Shelf Cabinet - 48"W x 24"D x 72"H, (4) Shelves, 1000 lb. Capacity/Shelf, 14 Gauge $1,594.67

Manufacturer: Valley Craft, Manufacturer Part Number: F89808A2Valley Craft’s 48 x 24 x 72”Heavy Duty Shelf Cabinets are the perfect solution for organization, storing, and protecting tools and supplies. These cabinets are built to last utilizing reinforced box-formed shelves, a zinc plated handle, 14 gauge steel, and a fully welded design. Protecting, storing, and organizing valuable tools and supplies is made simple. (4) shelves are included, easily adjustable on 7 1/2” increments, and with a 1, lb. capacity each. Doors utilize premium full length piano hinges to maximize the stability, durability, and longevity of the cabinet. The strategically designed 3-point locking system helps keep tools, supplies, inventory, and other valuables secure. Additional accessories are sold separately. Valley Craft’s Heavy Duty Shelf Cabinets are constructed of heavy duty 14 gauge steel, fully welded, and have a premium powder coat paint finish in gray. Products are shipped fully assembled, and made in the U.S.A.

Valley Craft Valley Craft Heavy Duty Shelf Cabinet - 48"W x 24"D x 84"H, (4) Shelves, 1000 lb. Capacity/Shelf, 14 Gauge $1,808.00

Manufacturer: Valley Craft, Manufacturer Part Number: F89809A1Valley Craft’s 48 x 24 x 84”Heavy Duty Shelf Cabinets are the perfect solution for organization, storing, and protecting tools and supplies. These cabinets are built to last utilizing reinforced box-formed shelves, a zinc plated handle, 14 gauge steel, and a fully welded design. Protecting, storing, and organizing valuable tools and supplies is made simple. (4) shelves are included, easily adjustable on 7 1/2” increments, and with a 1, lb. capacity each. Doors utilize premium full length piano hinges to maximize the stability, durability, and longevity of the cabinet. The strategically designed 3-point locking system helps keep tools, supplies, inventory, and other valuables secure. Additional accessories are sold separately. Valley Craft’s Heavy Duty Shelf Cabinets are constructed of heavy duty 14 gauge steel, fully welded, and have a premium powder coat paint finish in gray. Products are shipped fully assembled, and made in the U.S.A.

Find anything you need