Lockers

Manufacturer: Bradley, Manufacturer Part Number: LK301872GHM-200Lenox Gear Locker is constructed of 1/2in. HDPE material. Lenox Gear Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Gray High Density Polyethelene plastic. The Gear Locker configuration is 30in. wide. The Gear Locker configuration is 18in. deep. The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK242472GHM-202Lenox Gear Locker is constructed of 1/2in. HDPE material. Lenox Gear Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Beige High Density Polyethelene plastic. The Gear Locker configuration is 24in. wide. The Gear Locker configuration is 24in. deep The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK242172GHM-203Lenox Gear Locker is constructed of 1/2in. HDPE material. Lenox Gear Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Deep Blue High Density Polyethelene plastic. The Gear Locker configuration is 24in. wide. The Gear Locker configuration is 21in. deep The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK242172GHM-200Lenox Gear Locker is constructed of 1/2in. HDPE material. Lenox Gear Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Gray High Density Polyethelene plastic. The Gear Locker configuration is 24in. wide. The Gear Locker configuration is 21in. deep The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK241872GHM-202Lenox Gear Locker is constructed of 1/2in. HDPE material. Lenox Gear Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Beige High Density Polyethelene plastic. The Gear Locker configuration is 24in. wide. The Gear Locker configuration is 18in. deep. The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK241872GHM-203Lenox Gear Locker is constructed of 1/2in. HDPE material. Lenox Gear Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Deep Blue High Density Polyethelene plastic. The Gear Locker configuration is 24in. wide. The Gear Locker configuration is 18in. deep. The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK241872GHM-200Lenox Gear Locker is constructed of 1/2in. HDPE material. Lenox Gear Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Gray High Density Polyethelene plastic. The Gear Locker configuration is 24in. wide. The Gear Locker configuration is 18in. deep. The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Pucel, Manufacturer Part Number: DLCU-2424-3Doors equipped with pull handle and padlock loop eyes. The entire unit is all welded, constructed of 14 gauge steel. Comes with 3 doors and 3 compartments. Dimensions: 24"W x 24"D x 74"H.

Manufacturer: Pucel, Manufacturer Part Number: DPL-1621Double stackable locker section comes equipped with three fixed shelves, padlock loop eye, and keyed handle. Shelf clearances: 5" top shelf to first shelf; 5" first to second shelf; 4–1/4" second to third shelf; 10–1/2" third shelf to bottom. Top Locker Dimensions: 16"D x 21"W x 34"H. Bottom Locker Dimensions: 16"D x 21"W x 30"H. Overall Dimensions: 16"D x 21"W x 68"H.

Manufacturer: Pucel, Manufacturer Part Number: DLCU-2424-2Doors equipped with pull handle and padlock loop eyes. The entire unit is all welded, constructed of 14 gauge steel. Comes with 2 doors and 2 compartments. Dimensions: 24"W x 24"D x 74"H.

Manufacturer: Pucel, Manufacturer Part Number: DLCU-2424-1Doors equipped with pull handle and padlock loop eyes. The entire unit is all welded, constructed of 14 gauge steel. Comes with 1 door and 3 compartments. Dimensions: 24"W x 24"D x 74"H.

Manufacturer: Pucel, Manufacturer Part Number: PL-1875Heavy duty, all welded steel locker. Slope top single door locker 18"W x 18"D x 75"OAH. Unit has a 3" high base. Equipped with shelf, hanger bar, rear coat hooks. Features recessed cylinder lock paddle handle. Louvers on door for ventilation.

Manufacturer: Bradley, Manufacturer Part Number: EPFT-S1260-202Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a flat top. Constructed of Beige High Density Polyethelene plastic. The Locker configuration is 12in. deep. The height of the Locker is 60in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: EPST-S1560-202Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a slope top. Constructed of Beige High Density Polyethelene plastic. The Locker configuration is 15in. deep. The height of the Locker is 60in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: EPFT-S1272-202Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a flat top. Constructed of Beige High Density Polyethelene plastic. The Locker configuration is 12in. deep. The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: EPFT-S1260-203Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a flat top. Constructed of Deep Blue High Density Polyethelene plastic. The Locker configuration is 12in. deep. The height of the Locker is 60in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: EPFT-S1260-200Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a flat top. Constructed of Gray High Density Polyethelene plastic. The Locker configuration is 12in. deep. The height of the Locker is 60in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: ST1836-200Locker Slope Top is constructed of 1/2in. thick HDPE material. Slope Top is designed to cover top of lockers and will not allow dust or items to be placed on lockers. Constructed of Gray High Density Polyethelene plastic. The Locker configuration is 18in. deep. The locker components are 36in. wide. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: ST1845-200Locker Slope Top is constructed of 1/2in. thick HDPE material. Slope Top is designed to cover top of lockers and will not allow dust or items to be placed on lockers. Constructed of Gray High Density Polyethelene plastic. The Locker configuration is 18in. deep. The locker components are 45in. wide. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: EPFT-S1272-200Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a flat top. Constructed of Gray High Density Polyethelene plastic. The Locker configuration is 12in. deep. The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: ST1845-203Locker Slope Top is constructed of 1/2in. thick HDPE material. Slope Top is designed to cover top of lockers and will not allow dust or items to be placed on lockers. Constructed of Deep Blue High Density Polyethelene plastic. The Locker configuration is 18in. deep. The locker components are 45in. wide. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: ST1845-202Locker Slope Top is constructed of 1/2in. thick HDPE material. Slope Top is designed to cover top of lockers and will not allow dust or items to be placed on lockers. Constructed of Beige High Density Polyethelene plastic. The Locker configuration is 18in. deep. The locker components are 45in. wide. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: ST1836-203Locker Slope Top is constructed of 1/2in. thick HDPE material. Slope Top is designed to cover top of lockers and will not allow dust or items to be placed on lockers. Constructed of Deep Blue High Density Polyethelene plastic. The Locker configuration is 18in. deep. The locker components are 36in. wide. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: ST1836-202Locker Slope Top is constructed of 1/2in. thick HDPE material. Slope Top is designed to cover top of lockers and will not allow dust or items to be placed on lockers. Constructed of Beige High Density Polyethelene plastic. The Locker configuration is 18in. deep. The locker components are 36in. wide. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.