Lockers

Manufacturer: Little Giant, Manufacturer Part Number: SC2-2448-6PHThe small 3/4" x 1–1/2" diamond shaped openings and heavy gauge of the flattened expanded metal on this truck provide maximum security for even the smallest items, while still allowing good visibility and air circulation. The double doors swing open a full 270 degrees, back to the sides and out of the way, and feature padlockable hasp. Interior height 48", overall height 56" with 2 swivel and 2 rigid, 6" x 2" phenolic wheels. Comes with 2 center shelves. Capacity: 2,000–lbs. Dimensions: 24" x 48".

Manufacturer: Little Giant, Manufacturer Part Number: SC2-3048-6PHThe small 3/4" x 1–1/2" diamond shaped openings and heavy gauge of the flattened expanded metal on this truck provide maximum security for even the smallest items, while still allowing good visibility and air circulation. The double doors swing open a full 270 degrees, back to the sides and out of the way, and feature padlockable hasp. Interior height 48", overall height 56" with 2 swivel and 2 rigid, 6" x 2" phenolic wheels. Comes with 2 center shelves. Capacity: 2,000–lbs. Dimensions: 30" x 48".

Manufacturer: Little Giant, Manufacturer Part Number: SC2-2460-6PHThe small 3/4" x 1–1/2" diamond shaped openings and heavy gauge of the flattened expanded metal on this truck provide maximum security for even the smallest items, while still allowing good visibility and air circulation. The double doors swing open a full 270 degrees, back to the sides and out of the way, and feature padlockable hasp. Interior height 48", overall height 56" with 2 swivel and 2 rigid, 6" x 2" phenolic wheels. Comes with 2 center shelves. Capacity: 2,000–lbs. Dimensions: 24" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: SC2-2460-6PPYThe small 3/4" x 1–1/2" diamond shaped openings and heavy gauge of the flattened expanded metal on this truck provide maximum security for even the smallest items, while still allowing good visibility and air circulation. The double doors swing open a full 270 degrees, back to the sides and out of the way, and feature padlockable hasp. Interior height 48", overall height 56" with 2 swivel and 2 rigid, 6" x 2" non–marking polyurethane wheels. Comes with 2 center shelves. Capacity: 2,000–lbs. Dimensions: 24" x 60".

Manufacturer: Pucel, Manufacturer Part Number: DLCU-2424-3Doors equipped with pull handle and padlock loop eyes. The entire unit is all welded, constructed of 14 gauge steel. Comes with 3 doors and 3 compartments. Dimensions: 24"W x 24"D x 74"H.

Manufacturer: Pucel, Manufacturer Part Number: DPL-1621Double stackable locker section comes equipped with three fixed shelves, padlock loop eye, and keyed handle. Shelf clearances: 5" top shelf to first shelf; 5" first to second shelf; 4–1/4" second to third shelf; 10–1/2" third shelf to bottom. Top Locker Dimensions: 16"D x 21"W x 34"H. Bottom Locker Dimensions: 16"D x 21"W x 30"H. Overall Dimensions: 16"D x 21"W x 68"H.

Manufacturer: Pucel, Manufacturer Part Number: DLCU-2424-2Doors equipped with pull handle and padlock loop eyes. The entire unit is all welded, constructed of 14 gauge steel. Comes with 2 doors and 2 compartments. Dimensions: 24"W x 24"D x 74"H.

Manufacturer: Pucel, Manufacturer Part Number: DLCU-2424-1Doors equipped with pull handle and padlock loop eyes. The entire unit is all welded, constructed of 14 gauge steel. Comes with 1 door and 3 compartments. Dimensions: 24"W x 24"D x 74"H.

Manufacturer: Pucel, Manufacturer Part Number: PL-1875Heavy duty, all welded steel locker. Slope top single door locker 18"W x 18"D x 75"OAH. Unit has a 3" high base. Equipped with shelf, hanger bar, rear coat hooks. Features recessed cylinder lock paddle handle. Louvers on door for ventilation.

Manufacturer: Bradley, Manufacturer Part Number: EPST-S1560-202Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a slope top. Constructed of Beige High Density Polyethelene plastic. The Locker configuration is 15in. deep. The height of the Locker is 60in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: ST1836-200Locker Slope Top is constructed of 1/2in. thick HDPE material. Slope Top is designed to cover top of lockers and will not allow dust or items to be placed on lockers. Constructed of Gray High Density Polyethelene plastic. The Locker configuration is 18in. deep. The locker components are 36in. wide. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: ST1845-200Locker Slope Top is constructed of 1/2in. thick HDPE material. Slope Top is designed to cover top of lockers and will not allow dust or items to be placed on lockers. Constructed of Gray High Density Polyethelene plastic. The Locker configuration is 18in. deep. The locker components are 45in. wide. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: ST1845-203Locker Slope Top is constructed of 1/2in. thick HDPE material. Slope Top is designed to cover top of lockers and will not allow dust or items to be placed on lockers. Constructed of Deep Blue High Density Polyethelene plastic. The Locker configuration is 18in. deep. The locker components are 45in. wide. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: ST1845-202Locker Slope Top is constructed of 1/2in. thick HDPE material. Slope Top is designed to cover top of lockers and will not allow dust or items to be placed on lockers. Constructed of Beige High Density Polyethelene plastic. The Locker configuration is 18in. deep. The locker components are 45in. wide. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: ST1836-203Locker Slope Top is constructed of 1/2in. thick HDPE material. Slope Top is designed to cover top of lockers and will not allow dust or items to be placed on lockers. Constructed of Deep Blue High Density Polyethelene plastic. The Locker configuration is 18in. deep. The locker components are 36in. wide. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: ST1836-202Locker Slope Top is constructed of 1/2in. thick HDPE material. Slope Top is designed to cover top of lockers and will not allow dust or items to be placed on lockers. Constructed of Beige High Density Polyethelene plastic. The Locker configuration is 18in. deep. The locker components are 36in. wide. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: ST1236-202Locker Slope Top is constructed of 1/2in. thick HDPE material. Slope Top is designed to cover top of lockers and will not allow dust or items to be placed on lockers. Constructed of Beige High Density Polyethelene plastic. The Locker configuration is 12in. deep. The locker components are 36in. wide. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: EPST-S1860-203Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a slope top. Constructed of Deep Blue High Density Polyethelene plastic. The Locker configuration is 18in. deep. The height of the Locker is 60in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: EPST-S1872-247Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a slope top. Constructed of 100% Post Consumer High Density Polyethelene plastic in color of Toffee. The Locker configuration is 18in. deep. The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: EPST-S1872-203Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a slope top. Constructed of Deep Blue High Density Polyethelene plastic. The Locker configuration is 18in. deep. The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: EPST-S1872-202Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a slope top. Constructed of Beige High Density Polyethelene plastic. The Locker configuration is 18in. deep. The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: EPST-S1860-200Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a slope top. Constructed of Gray High Density Polyethelene plastic. The Locker configuration is 18in. deep. The height of the Locker is 60in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: EPST-S1572-203Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a slope top. Constructed of Deep Blue High Density Polyethelene plastic. The Locker configuration is 15in. deep. The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: EPST-S1872-200Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a slope top. Constructed of Gray High Density Polyethelene plastic. The Locker configuration is 18in. deep. The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.