Drum Lifters, Movers and Dispensers

Manufacturer: Valley Craft, Manufacturer Part Number: F87787B1Roto–Lift rotating drum handler is a manually–propelled, straddle–type unit that centers the load between the wheels for maximum balance and safety. Lifts and rotates 360degrees as an AC–powered handler. Optional floor lock available. Unit handles steel, plastic & fiber cylinders 14" – 24". Turns 44", and has a maximum lift height of 71" at 17 feet–per–min. 800–lb. capacity.SPECIFICATIONS40" x 60" x 96" - 510 lbs.

Manufacturer: Valley Craft, Manufacturer Part Number: F88563B9Roto–Lift rotating drum handler is a manually–propelled, straddle–type unit that centers the load between the wheels for maximum balance and safety. Lifts and rotates 360degrees as a manual–powered handler. Optional floor lock available. Unit handles steel, plastic & fiber cylinders 14" – 24". Turns 44", and has a maximum lift height of 61" at 5 feet–per–min. 800–lb. capacity.SPECIFICATIONS40" x 60" x 84" - 457 lbs.

Manufacturer: Valley Craft, Manufacturer Part Number: 8565RAISE, ROTATE AND LOWER – all at the touch of a button. Roto–Lift® comes equipped with push handles and casters for easy maneuverability. Compact design with battery powered hydraulic system. Nylon straps adjust to fit any drum. Power pack buttons allow safe one–touch lifting and rotating. Drums can rotate 360° to the left or right allowing draining at any angle. Uses a standard 12–volt battery (not included). Built–in charger plugs into any 110–volt grounded outlet. 61" Lifting Height Rotates a full 360° either direction Works with any drum Perfect for draining and stacking SPECIFICATIONS800 lbs. Load Bearing Capacity - 513 lbs.1 handler78" H x 30" W x 42.25" L

Manufacturer: Vestil, Manufacturer Part Number: DCR-205-8This product allows you to easily transport and rotate 55 gallons steel drums using a fork truck. Drums are held securely in place by a durable chain locking system. Each unit is provided with a 15 foot long chain to allow the drum to be rotated up to 360° from the fork truck operator's seat. Fork pockets measure 7" wide by 2" high usable. Safety chain is used to secure unit to fork truck. Bung Nut Wrench, model BNW–I, is also included for opening and closing drums. SPECIFICATIONS800 lbs Capacity43" x 40" x 21.5" - 259 lbs.

Manufacturer: Valley Craft, Manufacturer Part Number: F89413A9Floor Lock fits any counterweighted model of Roto–Lift.SPECIFICATIONS10" x 10" x 3" - 4 lbs.

Manufacturer: Vestil, Manufacturer Part Number: FDA-800Designed to hold and support fiber and plastic drums. Each adapter can be utilized in conjunction with models HDC–305, DCR–205, DCR–110, and DCT. Comes complete with both an adjusting arm and a high strength nylon strap. Fits drums measuring 12" to 21" in diameter and 28" to 36" high.SPECIFICATIONS12" x 12" x 36" - 14 lbs.

Manufacturer: Wesco, Manufacturer Part Number: 240077Patented design, with long belt, handles all poly and steel drums including overpacks. Floating axle reduces effort required to break over and balance load. Non–puncture feet and belt are replaceable. 1,000 pound load capacity. Your choice of polyolefin or rubber wheels. SPECIFICATIONS67 lbs.1 truck59.5" H x 23.5" W (at handle)

Manufacturer: Wesco, Manufacturer Part Number: 240082Patented design, with long belt, handles all poly and steel drums including overpacks. Floating axle reduces effort required to break over and balance load. Non–puncture feet and belt are replaceable. 1,000 pound load capacity. Your choice of polyolefin or rubber wheels.SPECIFICATIONS82 lbs.1 truck59.5" H x 23.5" W (at handle)

Manufacturer: Vestil, Manufacturer Part Number: PRDC-DPNOptional Pallet Rack Drum Cradle Drip Pan prevents leaks from going to the floor, includes brackets.

Manufacturer: Wesco, Manufacturer Part Number: 240005Multi–functional drum truck allows you to move your drums on four wheels and acts as a drum cradle for storage or dispensing. It has a 1,000 pound capacity. The non–sparking polyolefin rollers allow for easy faucet positioning of drums. Frame clearance for dispensing into 5–gallon pails. Rear axle allows for loading and unloading of drums from pallets. Convenient kick–stand for upright storage. Your choice of polyolefin or rubber wheels.SPECIFICATIONS16.5" Drain Height - 82 lbs.1 truck/cradle56.5" H x 24" W (at handle)

Manufacturer: Durham, Manufacturer Part Number: BCT-2896-10K-9596 wide, bar cradle truck, gray Mfg Part#: BCT-2896-10K-95

Manufacturer: Vestil, Manufacturer Part Number: PRDC-RK-RFRoller Kit for Revolving Drum Cradle. MFG Part# PRDC-RK-RF

Manufacturer: Morse, Manufacturer Part Number: 92-30DRUM LIFTER, TOP CHINE, 15"–23" DIA. RIMMED STEEL, FIBER OR POLY, 1000Lb . CAPACITY, INCLUDES LOAD TEST CERT.

Manufacturer: Vestil, Manufacturer Part Number: DCC-80Description: Steel, Size (W x L x H): 29" x 29" x 24", Capacity (Pounds): 4,000, Caster Size: 6" x 2" – Heavy–Duty Cradle Carts – Move and store pipe, channel, bar stock, barrels, or drums with these Heavy–Duty Cradle Carts. A large open design that makes loading and unloading by fork trucks and slings easy. All welded construction. Wheels are mounted in a diamond pattern to allow the truck to tilt when going over thresholds and turn about on its own center. Steel Cradle Carts rolls on (2) rigid and (2) swivel phenolic casters. Powder coat finish standard on steel cart.

Manufacturer: Vestil, Manufacturer Part Number: PRDC-36The Pallet Rack Drum Cradle converts pallet racks into a versatile horizontal drum cradle. The unit works with either box beams and/or step beams. The drum angle is adjustable by using the height-adjustment bolts (sloping drum allows user to get 3% more fluid out). MFG Part# PRDC-36

Manufacturer: Wesco, Manufacturer Part Number: 240006Multi–functional drum truck allows you to move your drums on four wheels and acts as a drum cradle for storage or dispensing. It has a 1,000 pound capacity. The non–sparking polyolefin rollers allow for easy faucet positioning of drums. Frame clearance for dispensing into 5–gallon pails. Rear axle allows for loading and unloading of drums from pallets. Convenient kick–stand for upright storage. Your choice of polyolefin or rubber wheels.SPECIFICATIONS16.5" Drain Height - 66 lbs.1 truck/cradle56.5" H x 24" W (at handle)

Manufacturer: Vestil, Manufacturer Part Number: PRDC-36-RThe Pallet Rack Drum Cradle converts pallet racks into a versatile horizontal drum cradle. The unit works with either box beams and/or step beams. The drum angle is adjustable by using the height-adjustment bolts (sloping drum allows user to get 3% more fluid out). MFG Part# PRDC-36-R

Manufacturer: Vestil, Manufacturer Part Number: PRDC-42-RThe Pallet Rack Drum Cradle converts standard (42 inch) pallet racks into a versatile horizontal drum cradle. The unit works with either box beams and/or step beams and features rollers that allow manual drum rotation making faucet/vent install easy. The drum angle is adjustable by using the height-adjustment bolts (sloping drum allows user to get 3% more fluid out).

Manufacturer: Vestil, Manufacturer Part Number: PRDC-42The Pallet Rack Drum Cradle converts standard (42 inch) pallet racks into a versatile horizontal drum cradle. The unit works with either box beams and/or step beams. The drum angle is adjustable by using the height-adjustment bolts (sloping drum allows user to get 3% more fluid out).

Manufacturer: Morse, Manufacturer Part Number: GEK-1-305-E1KIT, ENCLOSURE W/ SAFETY INTERLOCK, FIELD INSTALL FOR MODEL 1–305–E1

Manufacturer: Morse, Manufacturer Part Number: GEK-1-305-575KIT, ENCLOSURE W/ SAFETY INTERLOCK, FIELD INSTALL FOR MODEL 1–305–575

Manufacturer: Morse, Manufacturer Part Number: GEK-1-305-3-50KIT, ENCLOSURE W/ SAFETY INTERLOCK, FIELD INSTALL FOR MODEL 1–305–3–50

Manufacturer: Morse, Manufacturer Part Number: GEK-1-305-1-230KIT, ENCLOSURE W/ SAFETY INTERLOCK, FIELD INSTALL FOR MODEL 1–305–1–230

Manufacturer: Morse, Manufacturer Part Number: GEK-1-305-3KIT, ENCLOSURE W/ SAFETY INTERLOCK, FIELD INSTALL FOR MODEL 1–305–3