Drum Lifters, Movers and Dispensers

Manufacturer: Vestil, Manufacturer Part Number: CA-72-2Outer Diameter: 72", Capacity (Pounds): 2,000, Overall Height: 2", Starting vs. Maintaining Force: 35 lbs / 20 lbs, Ships Via: Truck – Manual Carousel – The Carousel rotates materials 360° with the assistance of an operator. Now loading and unloading operations can be done more efficiently; minimizes fatigue and risk of back injury. The carousel may be added to an existing work bench, scissor table, or simply placed on the floor. Constructed from two pieces of rolled structural angle (3/16" thick). A series of roller bearings transfer the load smoothly and evenly to the supporting surface. Four guide rollers keep the rings aligned.

Manufacturer: Vestil, Manufacturer Part Number: CA-60-6Outer Diameter: 60", Capacity (Pounds): 6,000, Overall Height: 2", Starting vs. Maintaining Force: 55 lbs / 35 lbs, Ships Via: Truck – Manual Carousel – The Carousel rotates materials 360° with the assistance of an operator. Now loading and unloading operations can be done more efficiently; minimizes fatigue and risk of back injury. The carousel may be added to an existing work bench, scissor table, or simply placed on the floor. Constructed from two pieces of rolled structural angle (3/16" thick). A series of roller bearings transfer the load smoothly and evenly to the supporting surface. Four guide rollers keep the rings aligned.

Manufacturer: Vestil, Manufacturer Part Number: CA-60-2Outer Diameter: 60", Capacity (Pounds): 2,000, Overall Height: 2", Starting vs. Maintaining Force: 35 lbs / 20 lbs, Ships Via: Truck – Manual Carousel – The Carousel rotates materials 360° with the assistance of an operator. Now loading and unloading operations can be done more efficiently; minimizes fatigue and risk of back injury. The carousel may be added to an existing work bench, scissor table, or simply placed on the floor. Constructed from two pieces of rolled structural angle (3/16" thick). A series of roller bearings transfer the load smoothly and evenly to the supporting surface. Four guide rollers keep the rings aligned.

Manufacturer: Vestil, Manufacturer Part Number: LP-4000T-39When confronted with minimum floor space and only a hand pallet truck, the Thin Spin low–profile carousel is ideal for loading and unloading pallet applications. The Thin Spin is pallet truck loadable because of its sleek 7/8" overall height. The effective ramping length is 4–3/8"; slope is a mere 11°. A safety detent lock restricts carousel rotation when not in use. Units require a starting force of 35 lbs. and a maintaining force of 25 lbs. SPECIFICATIONS4,000 lbs Capacity50" x 50" x 0.875" - 205 lbs.

Manufacturer: Vestil, Manufacturer Part Number: CRF-108Uniform Capacity (pounds): 2,500, Pole Diameter (in.): 2–3/4, Pole Length (in.): 108, Fork Pocket Center (in.): 24, Usable Fork Pocket Width (in.): 7–1/2, Usable Fork Pocket Height (in.): 2–1/2, Mount Style: Fork – Transport rolls of carpet with this sturdy Rug Ram/Carpet Pole. High strength, rotatable, replaceable pole has tapered tip. Made of steel construction and painted blue. Fork Mounted Rug Ram has a safety restraint included to secure unit to fork truck.

Manufacturer: Vestil, Manufacturer Part Number: LP-4000TWhen confronted with minimum floor space and only a hand pallet truck, the Thin Spin low–profile carousel is ideal for loading and unloading pallet applications. The Thin Spin is pallet truck loadable because of its sleek 7/8" overall height. The effective ramping length is 4–3/8"; slope is a mere 11°. A safety detent lock restricts carousel rotation when not in use. Units require a starting force of 35 lbs. and a maintaining force of 25 lbs. SPECIFICATIONS4,000 lbs Capacity62" x 62" x 2" - 240 lbs.

Manufacturer: Vestil, Manufacturer Part Number: LP-4000T-45When confronted with minimum floor space and only a hand pallet truck, the Thin Spin lowprofile carousel is ideal for loading and unloading pallet applications. The Thin Spin is pallet truck loadable because of its sleek 7/8" overall height. The effective ramping length is 43/8"; slope is a mere 11 °. A safety detent lock restricts carousel rotation when not in use. Units require a starting force of 35 lbs. and a maintaining force of 25 lbs.SPECIFICATIONS4,000 lbs Capacity56" x 56" x 3" - 220 lbs.

Manufacturer: Vestil, Manufacturer Part Number: CRP-144Transport rolls of carpet with our sturdy Rug Rams/Carpet Poles. 2" diameter high strength, rotateable, replaceable pole has tapered tip. All units are made of steel construction and painted blue. Fork Mounted Rug Rams feature 7" wide by 2" by fork pockets on 24" centers. Safety restraint is included to secure unit to fork truck. SPECIFICATIONSLength: 144"1,800 lbs Capacity30.25" x 31" x 151.563" - 570 lbs.

Manufacturer: Vestil, Manufacturer Part Number: CRF-144The fork mounted rug ram is ideal for the warehouse and maintenance establishments. The construction is strong and durable throughout a lifetime of use. A chain is included for enhanced security while connecting to the transporting vehicle. The ram is finished to a smooth texture to minimize edges during transport.

Manufacturer: Vestil, Manufacturer Part Number: CRP-108Transport rolls of carpet with our sturdy Rug Rams/Carpet Poles. 2" diameter high strength, rotateable, replaceable pole has tapered tip. All units are made of steel construction and painted blue. Fork Mounted Rug Rams feature 7" wide by 2" by fork pockets on 24" centers. Safety restraint is included to secure unit to fork truck. SPECIFICATIONSLength: 108"2,500 lbs Capacity30.25" x 31" x 115.563" - 526 lbs.

Manufacturer: Vestil, Manufacturer Part Number: DCR-205-15This product allows you to easily transport and rotate 55 gallons steel drums using a fork truck. Drums are held securely in place by a durable chain locking system. Each unit is provided with a 15 foot long chain to allow the drum to be rotated up to 360° from the fork truck operator's seat. Fork pockets measure 7½" wide by 2½" high usable. Safety chain is used to secure unit to fork truck. Bung Nut Wrench, model BNW–I, is also included for opening and closing drums. SPECIFICATIONS1,500 lbs Capacity43" x 40" x 21.5" - 221 lbs.

Manufacturer: Vestil, Manufacturer Part Number: CRP-120Transport rolls of carpet with our sturdy Rug Rams/Carpet Poles. 2" diameter high strength, rotateable, replaceable pole has tapered tip. All units are made of steel construction and painted blue. Fork Mounted Rug Rams feature 7" wide by 2" by fork pockets on 24" centers. Safety restraint is included to secure unit to fork truck. SPECIFICATIONSLength: 120"2,200 lbs Capacity30.25" x 31" x 127.563" - 550 lbs.

Manufacturer: Vestil, Manufacturer Part Number: CRF-120The fork mounted rug ram is ideal for the warehouse and maintenance establishments. The construction is strong and durable throughout a lifetime of use. A chain is included for enhanced security while connecting to the transporting vehicle. The ram is finished to a smooth texture to minimize edges during transport.

Manufacturer: Valley Craft, Manufacturer Part Number: F88585C3Roto–Grip portable lift lifts and rotates steel drums and cylinders 18–24" with electric clamping jaws. Unit is manually propelled and features an electric–over–hydraulic control system. Electric screwjack clamps and releases the rubber–lined jaws, while the hydraulic rotator turns drums 360 degrees. Single mast design allows for high visibility. 800–lb. capacity. Optional floor lock available. Maximum lift travel is 61" at 17 feet–per–min. Turns 44". Electric–over–hydraulic control system requires 12–volt deep cycle battery and plugs into a standard grounded outlet. For steel cylinders only. Note: Batteries are included.SPECIFICATIONS45.5" x 31.5" x 81.5" - 621 lbs.

Manufacturer: Valley Craft, Manufacturer Part Number: F88589B9Roto–Lift rotating drum handler is a manually–propelled, straddle–type unit that centers the load between the wheels for maximum balance and safety. Lifts and rotates 360degrees as an air–powered handler. Air–powered models require an outside air source and is ideal for spark–resistant applications and requires outside air source. Optional floor lock available. Unit handles steel, plastic & fiber cylinders 14" – 24". Turns 44", and has a maximum lift height of 61" at 17 feet–per–min. 800–lb. capacity.SPECIFICATIONS40" x 60" x 96" - 488 lbs.

Manufacturer: Valley Craft, Manufacturer Part Number: F88580B8Roto–Lift Counterweighted rotating drum handler is a manually–propelled unit that butts up directly against pallets to make loading and unloading safe and effective. Lifts and rotates 360degrees as a manually–powered handler. Optional floor lock available. Unit handles steel, plastic & fiber cylinders 14" – 24". Turns 61.25", and has a maximum lift height of 61" at 5 feet–per–min. Comes with (34) 13.5–lb. counter–weights, requires more effort to move. 750–lb. capacity.SPECIFICATIONS48" x 40" x 83" - 1040 lbs.

Manufacturer: Valley Craft, Manufacturer Part Number: F88586C2Roto–Grip portable lift lifts and rotates steel drums and cylinders 18–24" with electric clamping jaws. Unit is manually propelled and features an electric–over–hydraulic control system. Electric screwjack clamps and releases the rubber–lined jaws, while the hydraulic rotator turns drums 360 degrees. Single mast design allows for high visibility. 800–lb. capacity. Optional floor lock available. Maximum lift travel is 71" at 17 feet–per–min. Turns 44". Electric–over–hydraulic control system requires 12–volt deep cycle battery and plugs into a standard grounded outlet. For steel cylinders only. Note: Batteries are included.SPECIFICATIONS48" x 40" x 95" - 702 lbs.

Manufacturer: Valley Craft, Manufacturer Part Number: F88590B6Roto–Lift rotating drum handler is a manually–propelled, straddle–type unit that centers the load between the wheels for maximum balance and safety. Lifts and rotates 360degrees as an air–powered handler. Air–powered models require an outside air source and is ideal for spark–resistant applications and requires outside air source. Optional floor lock available. Unit handles steel, plastic & fiber cylinders 14" – 24". Turns 44", and has a maximum lift height of 71" at 17 feet–per–min. 800–lb. capacity.SPECIFICATIONS40" x 60" x 96" - 508 lbs.

Manufacturer: Valley Craft, Manufacturer Part Number: F88588C0Roto–Grip counterweighted portable lift lifts and rotates steel drums and cylinders 18–24" with electric clamping jaws. Unit is manually propelled and features an electric–over–hydraulic control system. Counterweighted model butts directly up against pallets for effective loading and unloading. Electric screwjack clamps and releases the rubber–lined jaws, while the hydraulic rotator turns drums 360 degrees. Single mast design allows for high visibility. 800–lb. capacity. Optional floor lock available. Maximum lift travel is 71" at 17 feet–per–min. Turns 64.25". Electric–over–hydraulic control system requires 12–volt deep cycle battery and plugs into a standard grounded outlet. For steel cylinders only. Note: Batteries are included.SPECIFICATIONS48" x 40" x 95" - 1273 lbs.

Manufacturer: Valley Craft, Manufacturer Part Number: F88587C1Roto–Grip counterweighted portable lift lifts and rotates steel drums and cylinders 18–24" with electric clamping jaws. Unit is manually propelled and features an electric–over–hydraulic control system. Counterweighted model butts directly up against pallets for effective loading and unloading. Electric screwjack clamps and releases the rubber–lined jaws, while the hydraulic rotator turns drums 360 degrees. Single mast design allows for high visibility. 800–lb. capacity. Optional floor lock available. Maximum lift travel is 61" at 17 feet–per–min. Turns 61.25". Electric–over–hydraulic control system requires 12–volt deep cycle battery and plugs into a standard grounded outlet. For steel cylinders only. Note: Batteries are included.SPECIFICATIONS48" x 40" x 83" - 1208 lbs.

Manufacturer: Valley Craft, Manufacturer Part Number: F88570C0Roto–Lift Counterweighted rotating drum handler is a manually–propelled that butts up directly against pallets to make loading and unloading safe and effective. Lifts and rotates 360degrees as a battery–powered handler. Battery–powered model requires 12–volt deep cycle battery and plugs into a standard grounded outlet (battery included). Optional floor lock available. Unit handles steel, plastic & fiber cylinders 14" – 24". Turns 61.25", and has a maximum lift height of 71" at 17 feet–per–min. Comes with (34) 13.5–lb. counter–weights, requires more effort to move. 750–lb. capacity.SPECIFICATIONS48" x 40" x 95" - 1156 lbs.

Manufacturer: Valley Craft, Manufacturer Part Number: F88581B7Roto–Lift Counterweighted rotating drum handler is a manually–propelled unit that butts up directly against pallets to make loading and unloading safe and effective. Lifts and rotates 360degrees as a manually–powered handler. Optional floor lock available. Unit handles steel, plastic & fiber cylinders 14" – 24". Turns 61.25", and has a maximum lift height of 71" at 5 feet–per–min. Comes with (34) 13.5–lb. counter–weights, requires more effort to move. 750–lb. capacity.SPECIFICATIONS48" x 40" x 95" - 1047 lbs.

Manufacturer: Valley Craft, Manufacturer Part Number: F88569C3Roto–Lift Counterweighted rotating drum handler is a manually–propelled unit that butts up directly against pallets to make loading and unloading safe and effective. Lifts and rotates 360degrees as a battery–powered handler. Battery–powered model requires 12–volt deep cycle battery and plugs into a standard grounded outlet (battery included). Optional floor lock available. Unit handles steel, plastic & fiber cylinders 14" – 24". Turns 61.25", and has a maximum lift height of 61" at 17 feet–per–min. Comes with (34) 13.5–lb. counter–weights, requires more effort to move. 750–lb. capacity.SPECIFICATIONS48" x 40" x 83" - 1138 lbs.

Manufacturer: Valley Craft, Manufacturer Part Number: F88564B8Roto–Lift rotating drum handler is a manually–propelled, straddle–type unit that centers the load between the wheels for maximum balance and safety. Lifts and rotates 360degrees as a manual–powered handler. Optional floor lock available. Unit handles steel, plastic & fiber cylinders 14" – 24". Turns 44", and has a maximum lift height of 71" at 5 feet–per–min. 800–lb. capacity.SPECIFICATIONS40" x 60" x 96" - 501 lbs.