Drum Lifters, Movers and Dispensers

Manufacturer: Vestil, Manufacturer Part Number: CHDL-2025Accommodates Drum Diameter: 20" to 25", Capacity (Pounds): 1,000 – Crane/Hoist Drum Lifters – The Crane/Hoist Drum Lifter has an automatic mechanical operation. Great for positioning drums in and out of overpacks. Steel construction with spring loaded arms for safety. Accommodates steel, plastic, or fiber drums. Overall dimensions are 16"W x 9"L x 21"D. Drums weighing over 500 pounds must have top lid secured before lifting.

Manufacturer: Valley Craft, Manufacturer Part Number: F89406A8The Versa–LiftTM Pallet Forks move, elevate and stack pallets up to 24" deep. Useful as compact fork truck in congested areas narrow aisles.SPECIFICATIONS40" x 48" x 8" - 43 lbs.

Manufacturer: Morse, Manufacturer Part Number: 85-5PailPRO BELOW–HOOK 5–GALLON PAIL–KARRIER, 200 Lb. CAPACITY INCLUDES LOAD TEST CERTIFICATE

Manufacturer: Morse, Manufacturer Part Number: 90-30VERTI–KARRIER, BELOW–HOOK 30–GALLON DRUM LIFTER, 1000 Lb. CAPACITY, INCLUDES LOAD TEST CERTIFICATE

Manufacturer: Morse, Manufacturer Part Number: 92Use one drum lifter to do it all! Model 92 Drum Lifter has a self–adjusting tong–like action to lift a rimmed steel, plastic or fiber drum. It automatically grips various common types of closed head drums. Lift a drum to or from four–drum pallets or rows of adjacent drums. Model 92 Drum Lifter handles steel or plastic rimmed drum 18" to 26" in diameter, typical plastic rimmed 30 to 55–gallon drum, fiber drum 18.5" to 23" ID, 19" to 23.5" OD with lever–lock, and steel salvage 85–gallon or overpack drum (NOT for plastic overpack). Capacity: 1,000 Lb. Each model 92 drum lifter is load tested and factory certified at 125% of rated capacity as per ANSI B30.20.

Manufacturer: Morse, Manufacturer Part Number: 85iMorse model 85i Drum–Karrier enables you to move and pour a 55–gallon steel drum within reach with your hoist or crane. Mordel 85i accepts Diameter Adaptors for a smaller drum. Manually grasp and control drum tilting 360° in either direction. Also lock the drum in upright position to transport, or in horizontal position to pour. You can lift and invert your drum with drum faucet in place. Capacity: Full drum up to 800 Lb., Half–full drum up to 500 Lb. ACCEPTS ADAPTOR FOR SMALLER DRUMSPECIFICATIONS39" x 27" x 9" - 43 lbs.

Manufacturer: Morse, Manufacturer Part Number: 85CMorse model 85C Drum–Karrier enables you to move and pour a 21"–23" diameter steel or fiber drum within reach with your hoist or crane. Manually grasp and control drum tilting 360° in either direction. Also lock the drum in upright position to transport, or in horizontal position to pour. You can lift and invert your drum with drum faucet in place. Capacity: Full drum up to 800 Lb., Half–full drum up to 500 Lb. FOR 21" TO 23" DIAMETER STEEL OR FIBER DRUMSPECIFICATIONS39" x 27" x 9" - 41 lbs.

Manufacturer: Morse, Manufacturer Part Number: 85AMorse model 85A Drum–Karrier enables you to move and pour a 55–gallon steel drum within reach with your hoist or crane. Manually grasp and control drum tilting 360° in either direction. Also lock the drum in upright position to transport, or in horizontal position to pour. You can lift and invert your drum with drum faucet in place. Capacity: Full drum up to 800 Lb., Half–full drum up to 500 Lb.SPECIFICATIONS39" x 27" x 9" - 41 lbs.

Manufacturer: Vestil, Manufacturer Part Number: FDRS-V2Dual Ratchet Strap for the Steel Drum Adapter. MFG Part# FDRS-V2

Manufacturer: Vestil, Manufacturer Part Number: BELT-1The Ergonomic Carrier Back Support Belt is proven to reduce the risk of back problems. It is used by a variety of industries including: workers on building sites, builders, professional movers, storage workers, employee transport companies, production workers, employee hire companies, agricultural workers and harbor personnel. The Support Belt has easy release buckles on both sides and a wide webbing on the backside to support the lower back. The belt supports the weight of the box, which allows the carrier to have a free hand to open doors, fill out paperwork or help with any other needs they may have while carrying a box. MFG Part# BELT-1

Manufacturer: Morse, Manufacturer Part Number: 92-5PailPRO DRUM LIFTER, TOP CHINE, 11"–15" DIAMETER, 1000 Lb. CAPACITY, INCLUDES LOAD TEST CERTIFICATE

Manufacturer: Morse, Manufacturer Part Number: 90Vert–Karrier drum grab to lift, move and place your drums almost anywhere. Load a drum to and from remote or hard–to–reach areas. The grip will not disconnect until drum is fully down. You only need to operate your hoist to guide the drum grab into position. This saves operator time and protects against dangerous climbing. Capacity: 1,000 Lb. Each Model 90 Verti–Karrier is load tested and factory certified at 125% of rated capacity as per ANSI B30.20. Morse Verti–Lift Drum Lifter Series are NOT for drums without lids or tops in place.SPECIFICATIONS31" x 20" x 9" - 50 lbs.

Manufacturer: Morse, Manufacturer Part Number: 55/30SS-20.5ADAPTOR, STAINLESS STEEL, FOR 20"– 20.5" DIAMETER

Manufacturer: Morse, Manufacturer Part Number: 55/30SS-19ADAPTOR, STAINLESS STEEL, FOR 18.5"– 19" DIAMETER

Manufacturer: Morse, Manufacturer Part Number: 55/30SS-22ADAPTOR, STAINLESS STEEL, FOR 21.5"– 22" DIAMETER

Manufacturer: Morse, Manufacturer Part Number: AP405ADAPTOR TO HANDLE 55–GALLON PLASTIC DRUM WITH OMNI–LIFT DRUM RACKER

Manufacturer: Morse, Manufacturer Part Number: X03-400-72SSOPTION, 16" HANDWHEEL, 400A–72SS

Manufacturer: Morse, Manufacturer Part Number: G-400OPTION, 3–PIECE DRUM HOLDER FOR HYDRA–LIFT KARRIER

Manufacturer: Morse, Manufacturer Part Number: X03-185HDSSOPTION, 16" HAND WHEEL, TYPE 304 STAINLESS STEEL, FACTORY INSTALLED

Manufacturer: Morse, Manufacturer Part Number: X03-400-96SSOPTION, 16" HANDWHEEL, 400A–96SS

Manufacturer: Morse, Manufacturer Part Number: 14-SSCType 304 stainless steel drum dolly has stainless steel casters with 3" polypropylene wheels, ideal for food or pharmaceutical applications. Ideal for food or pharmaceutical applications. 24 x 60. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Vestil, Manufacturer Part Number: DGS-AThe Drum Gripper makes it easy to pick up one or two steel drums without leaving the seat of the fork truck. Simply slip the forks into the fork tubes and the Drum Gripper is ready to go. The knuckle gripping system is lowered around the drum, gripped tightly, and then lifted into the air. Drum is automatically released by lowering the forks. All models feature hinged folding design for storage. Models DGS–A and DGD–A feature adjustable–width arms for use with both 30–gallon and 55–gallon steel drums. Welded steel construction. Powder coat finish. SPECIFICATIONS800 lbs Capacity35" x 26" x 8" - 96 lbs.

Manufacturer: Morse, Manufacturer Part Number: 2523-PThis Belted Backrest equips MORSpeed forklift attachments with a 12" high fabric belt against the sidewall of the drum to help protect it from being marred in handling. It is available as a bolt–on accessory. Order one Belted Backrest Kit for each drum position on MORSpeed.SPECIFICATIONS10" x 10" x 17" - 5 lbs.

Manufacturer: Vestil, Manufacturer Part Number: FDG-55Acceptable Drum Sizes: 55–gallon, Usable Fork Opening: 5"W x 2"H – Fork Mounted Drum Gripper – Designed for use with fork trucks fitted with hydraulic lateral fork positioners only. Easily attaches to your forks for easy drum positioning. For use with 55–gallon steel drums. Usable fork openings are 6"W x 2"H. Secure to forks with friction–lock screw mechanism. Welded steel construction.