Drum Lifters and Slings

Manufacturer: Morse, Manufacturer Part Number: 525-TVERTICAL–LIFT DRUM POUR, 106", SCALE–EQUIPPED INTRINSICALLY–SAFE, MANUAL LIFT & TILT

Manufacturer: Morse, Manufacturer Part Number: 525M-TVERTICAL–LIFT DRUM POUR, 106", SPARK RESIST. PARTS, SCALE–EQUIP. INTRINSIC–SAFE, MANUAL LIFT & TILT

Manufacturer: Morse, Manufacturer Part Number: 515-N-120VERTICAL–LIFT DRUM POUR, 60", SCALE–EQUIPPED, AC POWER LIFT, MANUAL TILT

Manufacturer: Morse, Manufacturer Part Number: 515-N-124VERTICAL–LIFT DRUM POUR, 60", SCALE–EQUIPPED, AIR POWER LIFT, MANUAL TILT

Manufacturer: Morse, Manufacturer Part Number: 515M-T-124VERTICAL–LIFT DRUM POUR, 60", SPARK RESIST. PARTS,SCALE–EQUIP INTRINSIC SAFE, AIR POWER LIFT, MANUAL TILT

Manufacturer: Morse, Manufacturer Part Number: 515-N-125VERTICAL–LIFT DRUM POUR, 60", SCALE–EQUIPPED, 12V DC POWER LIFT, MANUAL TILT, INCL. BATTERY & CHARGER

Manufacturer: Morse, Manufacturer Part Number: 515-NVERTICAL–LIFT DRUM POUR, 60", SCALE EQUIPPED, MANUAL LIFT & TILT

Manufacturer: Morse, Manufacturer Part Number: 515-TVERTICAL–LIFT DRUM POUR, 60", SCALE–EQUIPPED – INTRINSICALLY–SAFE, MANUAL LIFT & TILT

Manufacturer: Morse, Manufacturer Part Number: 515M-TVERTICAL–LIFT DRUM POUR, 60", SPARK RESISTANT PARTS, SCALE–EQUIP. INTRINSICALLY–SAFE,MANUAL LIFT&TILT

Manufacturer: Morse, Manufacturer Part Number: 90-30VERTI–KARRIER, BELOW–HOOK 30–GALLON DRUM LIFTER, 1000 Lb. CAPACITY, INCLUDES LOAD TEST CERTIFICATE

Manufacturer: Morse, Manufacturer Part Number: 90Vert–Karrier drum grab to lift, move and place your drums almost anywhere. Load a drum to and from remote or hard–to–reach areas. The grip will not disconnect until drum is fully down. You only need to operate your hoist to guide the drum grab into position. This saves operator time and protects against dangerous climbing. Capacity: 1,000 Lb. Each Model 90 Verti–Karrier is load tested and factory certified at 125% of rated capacity as per ANSI B30.20. Morse Verti–Lift Drum Lifter Series are NOT for drums without lids or tops in place.SPECIFICATIONS31" x 20" x 9" - 50 lbs.

Manufacturer: Morse, Manufacturer Part Number: 90-85VERTI–KARRIER, BELOW–HOOK, 85–GALLON OVERPACK DRUM LIFTER, 1000 Lb. CAPA CITY, INCLUDES LOAD TEST CERTIFICATE

Manufacturer: Morse, Manufacturer Part Number: 90MVERTI–KARRIER,SPARK RESISTANT PARTS, BELOW–HOOK 55–GAL. DRUM LIFTER, 1000 Lb. CAPACITY,INCLUDES LOAD TEST CERT

Manufacturer: Morse, Manufacturer Part Number: 90-SSMove and place a drum almost anywhere with your hoist or crane. Load and place a drum in remote or hard–to–reach areas with Morse Verti–Karrier drum lifter. Stainless steel is ideal for food and pharmaceutical applications. Capacity: 1,000 Lb.SPECIFICATIONS31" x 20" x 9" - 50 lbs.

Manufacturer: Vestil, Manufacturer Part Number: DCT-85Uniform Capacity (pounds): 1,500, Accepts: 55–gallon steel drum, Rotates (degrees): 360, Rotation Method (feet): Chain 8, Construction : Steel, Finish: Painted – Hoist Mounted Drum Carrier/Rotator rotates and positions a fully loaded steel drum with ease. Best when used with an overhead hoist. Features a chain crank that allows the operator to rotate drums that are out of reach. Drums are held in place with a drum locking system. Drum must be full to rotate at rated capacity.

Manufacturer: Vestil, Manufacturer Part Number: DCT-75Uniform Capacity (pounds): 800, Accepts: 55–gallon steel drum, Rotates (degrees): 360, Rotation Method (feet): Chain 8, Construction : Steel, Finish: Painted – Hoist Mounted Drum Carrier/Rotator rotates and positions a fully loaded steel drum with ease. Best when used with an overhead hoist. Features a chain crank that allows the operator to rotate drums that are out of reach. Drums are held in place with a drum locking system. Drum must be full to rotate at rated capacity.

Manufacturer: Vestil, Manufacturer Part Number: DRUM-P-55Uniform Capacity (pounds): 800, Accepts: 55–gallon steel drum, Fork Pocket on Center (in.): 20–1/2, Fork Pocket Height (in.): 2–1/2, Fork Pocket Width (in.): 7–1/2, Construction: Heavy–duty Welded Steel, Finish: Powder–coat – The Drum Positioner allows fork truck driver to rotate standing drums to the horizontal racking position and vice–versa. Positive latching system ensures safe handling of drums. Slide the positioner extensions over the vertical drum. With the aid of the Drum Positioner, rotate drum to horizontal position. Latching system will engage to allow horizontal positioning of drum. It's now ready to slide into the rack. Mechanical operation relies on fork truck to rotate and lift drums. The Drum Positioner features a welded spacer to protect drum fixtures from damage when rotating.

Manufacturer: Vestil, Manufacturer Part Number: HDDL-55Uniform Capacity (pounds): 1,500, Jaw Opening Minimum (in.): 20, Jaw Opening Maximum (in.): 27, Accepts: 55–gallon drum – This Heavy Duty Vertical Drum Lifter is designed for lifting closed–head steel drums in vertical position. The Industrial ratchet load–binder is used to clamp the unit to the top of the drum and it is virtually impossible to break the drum loose. Inside jaw opening is adjustable. Lifting points are included for attachment of the sling. The unit has integral pockets for use with fork truck forks. Steel construction with blue painted finish.

Manufacturer: Vestil, Manufacturer Part Number: TDR-30Acceptable Drum Types: 30–gallon Steel, Fork Opening (W x H): 5–3/4" x 3", Capacity: 1200 lbs., Tilting Drum Rings – Transport up to 800 pounds with your fork truck and the Tilting Drum Ring. Pivoting fork pockets allow you to manually rotate drum to dispense light materials. To use, slip the band over the drum and tighten the lock to secure the band around the belly of the drum. Steel construction. Powder coat finish.

Manufacturer: Wesco, Manufacturer Part Number: 270040Model #: 232CP3. 30 Gallon Drum Adapter for 240034, 278751. DMG–30A 30 GAL INSERT DL/ML/DGL. Several Construction. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Wesco, Manufacturer Part Number: 440009Model #: DLS–1000. Horizontally lift all "closed or open–head" drums. D–shaped lifting ring fits most overhead systems. Inverted ring fits web–lifting slings. SLING: STEEL DRUM, (DLS–1000). Steel Construction. Weight Capacity: 1000 lbs. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Wesco, Manufacturer Part Number: 240057Model #: 5W683 – EDL–5. Lightweight and easy to use. Lock pin design holds drum firmly in place. Ships boxed via UPS. For use with closed head 55 gallon steel drums. EDL–5 FRAME: 053814. Steel Construction. Weight Capacity: 700 lbs. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Wesco, Manufacturer Part Number: 440001Model #: DRL–3. Heavy duty annealed ductile iron. Curved foot on stabilizing arm prevents damage to drum. DRL–3 DRUM LIFTER FOR STEEL DRUMS. Steel Construction. Weight Capacity: 3000 lbs. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Wesco, Manufacturer Part Number: 273108Model #: PTR. Adjustable chime hook. Ships KD easy assembly. Boxed dimensions 16.5"W x 22"D x 3"H. PAIL TIPPER. Steel Construction. Weight Capacity: 70 lbs. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.