Dock Plates

Manufacturer: Vestil, Manufacturer Part Number: E-7248Capacity: 3,400 lbs., Width: 72", Length: 48", Height Difference: 7", Plate Thickness: 3/8" – Aluminum Economizer Dockplate – Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with traffic to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid treadplate with bolt–on zinc plated legs and handles. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.

Manufacturer: Vestil, Manufacturer Part Number: TAS-20-7272Capacity: 20,000 lbs., Overall Size: 72"W x 72"L, Height Difference: 12" – Aluminum Truck Dockboards with Steel Safety Curbs – This dockboard is designed for portability and safety. Deck is made of tough high strength aluminum treadplate. Safety curbs are painted yellow and are constructed of structural steel with cast tapered ends. Steel legs are bolted for increased durability. Canted locking legs for easier fork truck portability. Manufactured in compliance of OSHA.

Manufacturer: Vestil, Manufacturer Part Number: TS-25-7272Capacity: 25,000 lbs., Overall Size: 72"W x 72"L, Height Difference: 12" – Steel Truck Dockboard – Constructed of high strength (55,000 psi) steel for long life. Beveled edges on both ends permit smooth entry and exit. Deck is diamond plated for safe, efficient use. Welded safety curbs for maximum strength. Locking legs minimize ramp movement and are uneven to allow the dockboard to sit canted for easier floor pickup by forklifts. Standard with leverlift for quick portability with fork truck. Optional accessories: lifting chains, span locks, span pins/holes and removable pickup loops. Manufactured in compliance with OSHA.

Manufacturer: Vestil, Manufacturer Part Number: PE-2072Capacity: 20,000 lbs., Operation: Electric, Usable Width: 72" – Edge–O–Docklevelers – Permanently attaches to face of dock. Recommended for docks at least 48" high. Each unit provides a service range of 5" up and 5" down. When the trailer departs the lip drops automatically behind the face of the bumpers. Concrete recess is not required. Complete with 2" x 8" x 18" bumpers and installation instructions. Standard ramping length is 27". A steel dock edge is required for proper installation. Edge–O–Dock is easy to operate. After the truck is backed against the dock, push and hold the control button. The leveler raises and the lip will extend and rest on the truck bed. The unit is operated by a 3/4 HP, 110/220 Volt, single phase motor prewired to 110 V. Unit comes complete with motor, pump, control box, cylinder, lines and oil.

Manufacturer: Vestil, Manufacturer Part Number: PP-2572-36Capacity: 25,000 lbs., Operation: Hand Pump, Usable Width: 72" – Edge–O–Docklevelers – Permanently attaches to face of dock. Recommended for docks at least 48" high. Each unit provides a service range of 5" up and 5" down. When the trailer departs the lip drops automatically behind the face of the bumpers. Concrete recess is not required. Complete with 2" x 8" x 18" bumpers and installation instructions. Ramping length 36". A steel dock edge is required for proper installation. Used to lift the leveler and extend the lip. The operator rotates the relief valve allowing the deck to descend down and rest upon the trailer. Unit comes complete with hand pump, wall–mount brackets, cylinder, 15 feet hydraulic line and oil.

Manufacturer: Vestil, Manufacturer Part Number: BTA-07007236Uniform Capacity (lbs.): 7000, Height Difference (in.) at 8 degree/17%: 4, Height Difference (in.) at 11 degrees/19%: 5, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 67–3/4, Usable Length (in.) : 36 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-06007848Size (W x L): 78" x 48", Ht. Difference (8°/17%): 5", Ht. Difference (11°/19%): 7", Capacity: 6,000 lbs – Aluminum Truck Dockboards with Welded Aluminum Curbs – Engineered and built to maximize safety while handling heavy fork trucks and loads. Locking legs prevent movement during loading and unloading operations. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Bend is 11° and 9" from the edge and the legs are 12" from the edge. Manufactured in compliance with OSHA.

Manufacturer: Vestil, Manufacturer Part Number: BTA-12007830Uniform Capacity (lbs.): 12000, Height Difference (in.) at 8 degree/17%: 3, Height Difference (in.) at 11 degrees/19%: 4, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 73–1/2, Usable Length (in.) : 30 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

The Vestil 7HP Dock Lift Unit (Part Number: WL-7HP) is designed for safe and efficient loading and unloading in demanding industrial settings. Engineered for dock operations, truck loading areas, and temporary platforms, this optional 7-1/2 HP power unit delivers robust performance and reliable results, ensuring maximum productivity and safety in material handling tasks.Key Technical Specifications 7-1/2 HP motor built for heavy-duty applications Three-phase wiring operating at 28-23/46V, 6Hz Pump capacity of 6 gallons per minute Suitable for high-volume, continuous-duty environments Safety & Versatility Features Constructed with strict quality controls to ensure safe operation Compatible with optional upgrades such as overload protection and emergency stop systems Customizable configuration options to meet specific operational requirements The 7HP Dock Lift Unit is the ideal solution for businesses looking for dependable dock equipment that enables efficient loading processes while prioritizing safety. Its versatility makes it an excellent choice not only for permanent dock installations but also for environments that require flexible or temporary solutions. With simple installation guidelines and compatibility with industry-standard safety enhancements, this unit represents Vestil's commitment to performance and regulatory compliance. For a complete range of dock and loading solutions, explore our Dock Plates and Material Handling collections.

Manufacturer: Vestil, Manufacturer Part Number: BTA-06008460Size (W x L): 84" x 60", Ht. Difference (8°/17%): 7", Ht. Difference (11°/19%): 10", Capacity: 6,000 lbs – Aluminum Truck Dockboards with Welded Aluminum Curbs – Engineered and built to maximize safety while handling heavy fork trucks and loads. Locking legs prevent movement during loading and unloading operations. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Bend is 11° and 9" from the edge and the legs are 12" from the edge. Manufactured in compliance with OSHA.

Manufacturer: Vestil, Manufacturer Part Number: E-3624Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with people to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid tread plate. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks. SPECIFICATIONS3,600 lbs Capacity24" x 36" x 6.5" - 43 lbs.

Manufacturer: Vestil, Manufacturer Part Number: E-3030Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with people to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid tread plate. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks. SPECIFICATIONS2,300 lbs Capacity30" x 30" x 6.5" - 48 lbs.

Manufacturer: Vestil, Manufacturer Part Number: E-3048Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with people to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid tread plate. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.SPECIFICATIONS1,400 lbs Capacity48" x 30" x 9.5" - 72 lbs.

Manufacturer: Vestil, Manufacturer Part Number: FM-FMOptional Edge-O-Dockleveler Conversion Kit. FM-Series (hook style) to FM-Series (handle style).

This conversion kit is designed to upgrade your existing Edge-O-Dockleveler system effortlessly by converting a Hand Pump PP-Series to an Electric PE-Series. Built for industrial settings, it enhances safety and operational efficiency while ensuring compliance with standard spill response and facility protection guidelines.Key Product Details• Manufacturer: Vestil – for more industrial solutions, visit our Vestil collection.• Model Conversion: Hand Pump PP-Series to Electric PE-Series for smoother, automated operation.• Materials: Durable steel and high-impact plastic that ensure longevity and reliability.• Finishing: A sleek black and silver finish that complements modern dock levelers.• Specifications: Engineered for standard industrial dimensions and non-hazardous usage, meeting safety and hazard guidelines.Installation & Operation• Simple Integration: Easily retrofits onto existing Edge-O-Docklevelers with minimal adjustments.• Step-by-Step Setup: Detailed instructions simplify the installation process.• Consistency: Provides reliable performance to optimize dock operations and reduce manual intervention.• Ease of Use: Designed with user-friendly operational protocols to ensure a smooth transition from manual to electric systems.This conversion kit is an ideal solution for facilities looking to boost productivity and safety. Its robust construction and streamlined installation process make it a trusted choice for enhancing dock operations in demanding industrial environments. Explore more about related products in our Dock Plates collection for a complete material handling solution.

Manufacturer: Vestil, Manufacturer Part Number: CAS-RU-600The curb angle set are a wonderful asset when implementing a new dock leveler. The curb angle sets allow the surface to have a smooth transition and an a eye appealing appearance when installing dock leveling equipment. The set comes in multiple pieces for the easy handling and positioning. MFG Part# CAS-RU-600

The Dock Curb Angle Set RU-800-F is designed to ensure a safe, smooth transition for dock leveler installations while improving the overall appearance and functionality of your loading area. Manufactured by Vestil, this curb angle set is crafted for easy handling and accurate positioning, making it a critical component for industrial dock operations.Product Specifications Dimensions: Approximately 113 × 88 (overall width near 104″) Manufacturer: Vestil Part Number: CAS-RU-800-F Intended Use: Enables seamless dock level transitions for safe and efficient installation Country of Origin: USA Key Benefits Multi-piece design that simplifies handling and positioning during installation Provides a secure, appealing transition to enhance dock leveler performance Built for industrial applications to support safety compliance and operational security The modular design of this curb angle set ensures that each component is easy to maneuver, leading to a straightforward installation process. Its robust construction not only boosts safety at the dock but also offers a professional and refined look.Shipping & Legal Information: Ships by truck; additional shipping costs may apply Please review all applicable safety warnings, including California Proposition 65 guidelines For more dock equipment and solutions, check out our Dock Plates collection.

The Dock Lift 10 HP Power Unit by Vestil is created to improve industrial dock lift applications with exceptional safety, reliability, and efficiency. Designed for those in the market for a dock lift power unit and confident in choosing the Vestil WL-10HP, this unit delivers powerful performance for high-demand material handling and spill response tasks.Technical Specifications• Manufacturer: Vestil (Model WL-10HP)• Motor Horsepower: 10 HP• Electrical Requirements: Three-phase 208-230/460V• Frequency: 6Hz• Pump Capacity: 8 gallons per minute• Compatible with scissor dock lift setups, ensuring flexible installation in various industrial environments.Product Benefits• Easy installation with minimal maintenance• Improved operational efficiency for challenging settings• Built for rigorous daily use with industrial-grade durabilityEnhance your dock operations with this reliable power unit. For additional industrial and material handling solutions, visit our Vestil Collection. Contact us today to keep your operations running smoothly and safely.

Manufacturer: Vestil, Manufacturer Part Number: WL-RMBOptional Special Reservoir Mounting that is available in a wall mount or a handrail mount (non-removable).

Manufacturer: Vestil, Manufacturer Part Number: WL-3HPOptional three (3) HP Single Phase Electric Motor that can replace the standard three phase power unit with 28/23V, 1 phase, 6Hz power unit (1/2 gallons per minute pump speed).

Manufacturer: Vestil, Manufacturer Part Number: WL-RHTOptional Removable Handrail/Toe board used on a Truck Scissor Dock Lift that is mounted in a pit. This allows the platform to be flush with the floor for fork truck cross traffic. Please deduct 7-1/2 (in.) from overall width for usable width.

Manufacturer: Vestil, Manufacturer Part Number: WL-HHOptional Additional Hydraulic Hose for the Truck Scissor Dock Lift.

Manufacturer: Vestil, Manufacturer Part Number: WL-KLOptional Key Switch Lockout that avoids unauthorized use of the lift. This option will lock out the controls and the power units.

Manufacturer: Vestil, Manufacturer Part Number: WL-SATBOptional Split Aluminum Truck Bridge for replacement of standard steel bridge for the Truck Scissor Dock Lift. Ideal for repetitive applications.