Dock Plates

Manufacturer: Vestil, Manufacturer Part Number: TL-200-HP-FThe Trailer Lock System is designed for installation directly in front of the loading dock. The electric hydraulic system captures the ICC bar on the back of semi-trailers. To ensure maximum safety the unit comes standard with an accumulator that allows the lock to follow the trailer up and down as it is loaded/unloaded. A beeper and flashing light warns the operator if the lock does not engage the trailer properly. A visual indication of the restraint's status is shown at all times by the traffic light outside and the control panel inside. It comes standard with light package, control panel and three (3) large visual signs.

Manufacturer: Vestil, Manufacturer Part Number: SE/HP-DKOptional Removable Platform for the Combination Hand Pump and Electric Stacker. MFG Part# SE/HP-DK

Manufacturer: Vestil, Manufacturer Part Number: SB-HD-AK-4The Anchor Kits are a great addition to the facility maintenance department. The kit supplies a solution to securing speed bumps to a surface. The unit is designed of a strong construction that is resilient and long lasting throughout the harshest environments. Once the anchoring is in place, the speed bumps are ready for use. The kit is available in both glue down and asphalt anchor style. MFG Part# SB-HD-AK-4

Manufacturer: Vestil, Manufacturer Part Number: RR-610-20Capacity: 20,000 lbs. , Overall Size w/ Lip: 6'W x 10'4"L , Operation: Pull Chain - Mechanical Docklevelers - All heavy duty construction features 1/4" checkered plate deck (55,000 PSI) steel. 6" structural steel support understructure for long life. Lip is 16" long. Includes telescopic steel toe guards on both sides, flush with platform edge. Service range 12" above and below dock. Includes (2) laminated bumpers.

Manufacturer: Vestil, Manufacturer Part Number: RR-65-20Capacity: 20,000 lbs. , Overall Size w/ Lip: 6'W x 5'4"L , Operation: Pull Chain - Mechanical Docklevelers - All heavy duty construction features 1/4" checkered plate deck (55,000 PSI) steel. 6" structural steel support understructure for long life. Lip is 16" long. Includes telescopic steel toe guards on both sides, flush with platform edge. Service range 12" above and below dock. Includes (2) laminated bumpers.

Manufacturer: Vestil, Manufacturer Part Number: RR-66-20Capacity: 20,000 lbs. , Overall Size w/ Lip: 6'W x 6'4"L , Operation: Pull Chain - Mechanical Docklevelers - All heavy duty construction features 1/4" checkered plate deck (55,000 PSI) steel. 6" structural steel support understructure for long life. Lip is 16" long. Includes telescopic steel toe guards on both sides, flush with platform edge. Service range 12" above and below dock. Includes (2) laminated bumpers.

Manufacturer: Vestil, Manufacturer Part Number: RR-710-20Capacity: 20,000 lbs. , Overall Size w/ Lip: 7'W x 10'4"L , Operation: Pull Chain - Mechanical Docklevelers - All heavy duty construction features 1/4" checkered plate deck (55,000 PSI) steel. 6" structural steel support understructure for long life. Lip is 16" long. Includes telescopic steel toe guards on both sides, flush with platform edge. Service range 12" above and below dock. Includes (2) laminated bumpers.

Manufacturer: Vestil, Manufacturer Part Number: RR-76-20Capacity: 20,000 lbs. , Overall Size w/ Lip: 7'W x 6'4"L , Operation: Pull Chain - Mechanical Docklevelers - All heavy duty construction features 1/4" checkered plate deck (55,000 PSI) steel. 6" structural steel support understructure for long life. Lip is 16" long. Includes telescopic steel toe guards on both sides, flush with platform edge. Service range 12" above and below dock. Includes (2) laminated bumpers.

Manufacturer: Vestil, Manufacturer Part Number: RR-78-20Capacity: 20,000 lbs. , Overall Size w/ Lip: 7'W x 8'4"L , Operation: Pull Chain - Mechanical Docklevelers - All heavy duty construction features 1/4" checkered plate deck (55,000 PSI) steel. 6" structural steel support understructure for long life. Lip is 16" long. Includes telescopic steel toe guards on both sides, flush with platform edge. Service range 12" above and below dock. Includes (2) laminated bumpers.

Manufacturer: Vestil, Manufacturer Part Number: FM-2066The Edge-O-Dock leveler permanently attaches to face of dock. It is recommended for docks to be at least forty-eight (48) inches high. When the trailer departs, the lip drops automatically behind the face of the bumpers. Concrete recess is not required. It comes complete with bumpers and installation instructions. Standard Ramping is twenty-seven (29) inches, with a thirty-six (36-5/8) inch long ramping length available for smaller grade. A steel dock edge, or approach ramp is required for proper installation. The Mechanical Edge-O-Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically.

Manufacturer: Vestil, Manufacturer Part Number: FM-2072The Edge-O-Dock leveler permanently attaches to face of dock. It is recommended for docks to be at least forty-eight (48) inches high. When the trailer departs, the lip drops automatically behind the face of the bumpers. Concrete recess is not required. It comes complete with bumpers and installation instructions. Standard Ramping is twenty-seven (29) inches, with a thirty-six (36-5/8) inch long ramping length available for smaller grade. A steel dock edge, or approach ramp is required for proper installation. The Mechanical Edge-O-Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically.

Manufacturer: Vestil, Manufacturer Part Number: FM-3066The Edge-O-Dock leveler permanently attaches to face of dock. It is recommended for docks to be at least forty-eight (48) inches high. When the trailer departs, the lip drops automatically behind the face of the bumpers. Concrete recess is not required. It comes complete with bumpers and installation instructions. Standard Ramping is twenty-seven (27) inches, with a thirty-six (36) inch long ramping length available for smaller grade. A steel dock edge, or approach ramp is required for proper installation. The Mechanical Edge-O-Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically.

Manufacturer: Vestil, Manufacturer Part Number: FM-3072The Edge-O-Dock leveler permanently attaches to face of dock. It is recommended for docks to be at least forty-eight (48) inches high. When the trailer departs, the lip drops automatically behind the face of the bumpers. Concrete recess is not required. It comes complete with bumpers and installation instructions. Standard Ramping is twenty-seven (27) inches, with a thirty-six (36) inch long ramping length available for smaller grade. A steel dock edge, or approach ramp is required for proper installation. The Mechanical Edge-O-Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically.

Manufacturer: Vestil, Manufacturer Part Number: S-DKOptional Removable Platform for the Powered Drive and Powered Lift. MFG Part# S-DK

Manufacturer: Vestil, Manufacturer Part Number: VCH-48-PThe Portable Quartz Infrared Spot Heater is adjustable with wire guard included. Unit comes standard with casters and meets OSHA standards and is ETL C/U.S. listed.

Manufacturer: Vestil, Manufacturer Part Number: RR-68-20The Mechanical Dockleveler is constructed of heavy duty checkered plate deck steel for long term support of the steel channel understructure. The dock leveler allows for easy truck loading and unloading. The leveler is engineered and designed for minimum maintenance and features a smooth pull chain operation. Includes two (2) laminated bumpers.

Manufacturer: Vestil, Manufacturer Part Number: RR-75-25The Mechanical Dockleveler is constructed of heavy duty checkered plate deck steel for long term support of the steel channel understructure. The dock leveler allows for easy truck loading and unloading. The leveler is engineered and designed for minimum maintenance and features a smooth pull chain operation. Includes two (2) laminated bumpers. MFG Part# RR-75-20

Manufacturer: Vestil, Manufacturer Part Number: RR-610-30The Mechanical Dockleveler is constructed of heavy duty checkered plate deck steel for long term support of the steel channel understructure. The dock leveler allows for easy truck loading and unloading. The leveler is engineered and designed for minimum maintenance and features a smooth pull chain operation. Includes two (2) laminated bumpers. MFG Part# RR-610-30

Manufacturer: Vestil, Manufacturer Part Number: RR-65-30The Mechanical Dockleveler is constructed of heavy duty checkered plate deck steel for long term support of the steel channel understructure. The dock leveler allows for easy truck loading and unloading. The leveler is engineered and designed for minimum maintenance and features a smooth pull chain operation. Includes two (2) laminated bumpers. MFG Part# RR-65-30

Manufacturer: Vestil, Manufacturer Part Number: RR-66-30The Mechanical Dockleveler is constructed of heavy duty checkered plate deck steel for long term support of the steel channel understructure. The dock leveler allows for easy truck loading and unloading. The leveler is engineered and designed for minimum maintenance and features a smooth pull chain operation. Includes two (2) laminated bumpers. MFG Part# RR-65-30

Manufacturer: Vestil, Manufacturer Part Number: RR-68-30The Mechanical Dockleveler is constructed of heavy duty checkered plate deck steel for long term support of the steel channel understructure. The dock leveler allows for easy truck loading and unloading. The leveler is engineered and designed for minimum maintenance and features a smooth pull chain operation. Includes two (2) laminated bumpers. MFG Part# RR-65-30

Manufacturer: Vestil, Manufacturer Part Number: RR-710-30The Mechanical Dockleveler is constructed of heavy duty checkered plate deck steel for long term support of the steel channel understructure. The dock leveler allows for easy truck loading and unloading. The leveler is engineered and designed for minimum maintenance and features a smooth pull chain operation. Includes two (2) laminated bumpers. MFG Part# RR-710-30

Manufacturer: Vestil, Manufacturer Part Number: RR-75-30The Mechanical Dockleveler is constructed of heavy duty checkered plate deck steel for long term support of the steel channel understructure. The dock leveler allows for easy truck loading and unloading. The leveler is engineered and designed for minimum maintenance and features a smooth pull chain operation. Includes two (2) laminated bumpers. MFG Part# RR-75-20

Manufacturer: Vestil, Manufacturer Part Number: RR-76-30The Mechanical Dockleveler is constructed of heavy duty checkered plate deck steel for long term support of the steel channel understructure. The dock leveler allows for easy truck loading and unloading. The leveler is engineered and designed for minimum maintenance and features a smooth pull chain operation. Includes two (2) laminated bumpers. MFG Part# RR-75-20