Dock Bumpers and Seals

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-11Overall Height: 126", Overall Width: 114", Projection: 11" – Dock Seal / Shelter Combination – Combines the advantage of low cost and excellent sealing action. Designed for maximum energy savings with long–lasting features. For use with an 8'W x 10'H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run–off. Header measures 114"W with a 30" drop curtain. Side (verticals) measure 120" tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12"W and will taper to 9–1/2" at wall. Verticals are mounted on wooden 2" x 12" to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-12Overall Height: 126", Overall Width: 114", Projection: 12" – Dock Seal / Shelter Combination – Combines the advantage of low cost and excellent sealing action. Designed for maximum energy savings with long–lasting features. For use with an 8'W x 10'H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run–off. Header measures 114"W with a 30" drop curtain. Side (verticals) measure 120" tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12"W and will taper to 9–1/2" at wall. Verticals are mounted on wooden 2" x 12" to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-13Overall Height: 126", Overall Width: 114", Projection: 13" – Dock Seal / Shelter Combination – Combines the advantage of low cost and excellent sealing action. Designed for maximum energy savings with long–lasting features. For use with an 8'W x 10'H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run–off. Header measures 114"W with a 30" drop curtain. Side (verticals) measure 120" tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12"W and will taper to 9–1/2" at wall. Verticals are mounted on wooden 2" x 12" to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-14Overall Height: 126", Overall Width: 114", Projection: 14" – Dock Seal / Shelter Combination – Combines the advantage of low cost and excellent sealing action. Designed for maximum energy savings with long–lasting features. For use with an 8'W x 10'H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run–off. Header measures 114"W with a 30" drop curtain. Side (verticals) measure 120" tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12"W and will taper to 9–1/2" at wall. Verticals are mounted on wooden 2" x 12" to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-15Overall Height: 126", Overall Width: 114", Projection: 15" – Dock Seal / Shelter Combination – Combines the advantage of low cost and excellent sealing action. Designed for maximum energy savings with long–lasting features. For use with an 8'W x 10'H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run–off. Header measures 114"W with a 30" drop curtain. Side (verticals) measure 120" tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12"W and will taper to 9–1/2" at wall. Verticals are mounted on wooden 2" x 12" to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-16Overall Height: 126", Overall Width: 114", Projection: 16" – Dock Seal / Shelter Combination – Combines the advantage of low cost and excellent sealing action. Designed for maximum energy savings with long–lasting features. For use with an 8'W x 10'H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run–off. Header measures 114"W with a 30" drop curtain. Side (verticals) measure 120" tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12"W and will taper to 9–1/2" at wall. Verticals are mounted on wooden 2" x 12" to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-17Overall Height: 126", Overall Width: 114", Projection: 17" – Dock Seal / Shelter Combination – Combines the advantage of low cost and excellent sealing action. Designed for maximum energy savings with long–lasting features. For use with an 8'W x 10'H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run–off. Header measures 114"W with a 30" drop curtain. Side (verticals) measure 120" tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12"W and will taper to 9–1/2" at wall. Verticals are mounted on wooden 2" x 12" to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-18Overall Height: 126", Overall Width: 114", Projection: 18" – Dock Seal / Shelter Combination – Combines the advantage of low cost and excellent sealing action. Designed for maximum energy savings with long–lasting features. For use with an 8'W x 10'H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run–off. Header measures 114"W with a 30" drop curtain. Side (verticals) measure 120" tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12"W and will taper to 9–1/2" at wall. Verticals are mounted on wooden 2" x 12" to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-19Overall Height: 126", Overall Width: 114", Projection: 19" – Dock Seal / Shelter Combination – Combines the advantage of low cost and excellent sealing action. Designed for maximum energy savings with long–lasting features. For use with an 8'W x 10'H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run–off. Header measures 114"W with a 30" drop curtain. Side (verticals) measure 120" tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12"W and will taper to 9–1/2" at wall. Verticals are mounted on wooden 2" x 12" to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-20Overall Height: 126", Overall Width: 114", Projection: 20" – Dock Seal / Shelter Combination – Combines the advantage of low cost and excellent sealing action. Designed for maximum energy savings with long–lasting features. For use with an 8'W x 10'H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run–off. Header measures 114"W with a 30" drop curtain. Side (verticals) measure 120" tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12"W and will taper to 9–1/2" at wall. Verticals are mounted on wooden 2" x 12" to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-10The Dock Seal/Shelter Combination is used with a ninety-six (96) inch width by one-hundred Twenty (120) inch height door. The top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run-off. It contains a high density foam mounted to treated lumber. The verticals are mounted on wooden boards allowing wall mounted down the length of the vertical pieces. Application with flush dock to building in conjunction with an Edge-O-Dock use a twenty (20) inch projection Dock Seal. Unit is non-returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-12FOptional twelve (12) inch flap for Dock Seals and Shelters.

Manufacturer: Vestil, Manufacturer Part Number: D-54OZOptional 54 ounce material-face only for Dock Seals and Dock Shelters.

Manufacturer: Vestil, Manufacturer Part Number: D-KITOptional six piece vinyl patch material, including glue and instructions for Dock Seal and Dock Shelters.

Manufacturer: Vestil, Manufacturer Part Number: D-SVOptional Sloped verticals for Dock Seals and Dock Shelters.

Manufacturer: Vestil, Manufacturer Part Number: D-GSOptional Full Height Guide Strips for a Dock Seal and Dock Shelter.

Manufacturer: Vestil, Manufacturer Part Number: D-APOptional Armor pleats, top 24 (in.) only for Dock Seals and Shelters.

Manufacturer: Vestil, Manufacturer Part Number: D-BBFBottom bun for Dock Seals.

Manufacturer: Vestil, Manufacturer Part Number: D-750-24The Dock Shelter is used with doors up to one-hundred twenty (120) inch width by one-hundred twenty (120) inch height. The dock shelter reduces oversized doors to match truck openings. The long wear fabric is highly resistant to abrasion and tearing. Fiberglass staves are sewn into the flaps. Seal is formed along the fronts and top of trailer when the vertical and top panels are pushed inward by the trailer. There has a recommended minimum trailer penetration for a good seal with a supporting structure that is made of wolmanized lumber. Shelter is protected by safety yellow steel guide protectors. When installed, the shelter will close the door opening down to ninety (90) inch width by ninety (90) inch height (between flaps). Includes two (2) yellow steel guide protectors and foam-filled corner pads for extra sealing action. This unit is non-returnable.

Manufacturer: Vestil, Manufacturer Part Number: CWHF-SMOptional Cold Weather Hydraulic Oil. This oil is priced per gallon.

Manufacturer: Vestil, Manufacturer Part Number: D-18H18 (in.) header for Dock Seals.

Manufacturer: Vestil, Manufacturer Part Number: D-FHPFSOptional Full height pleats and full height guide stripes for Dock Seals and Dock Shelters.

Manufacturer: Vestil, Manufacturer Part Number: D-FHPSOptional Full height pleats, standard guide strips twenty-four (24) inch high for Dock Shelter and Dock Seals.

Manufacturer: Vestil, Manufacturer Part Number: EOD-SFOptional steel face for bumper. MFG Part# EOD-SF