Dock Bumpers and Seals

Manufacturer: Vestil, Manufacturer Part Number: D-12FOptional twelve (12) inch flap for Dock Seals and Shelters.

Manufacturer: Vestil, Manufacturer Part Number: D-54OZOptional 54 ounce material-face only for Dock Seals and Dock Shelters.

Manufacturer: Vestil, Manufacturer Part Number: D-KITOptional six piece vinyl patch material, including glue and instructions for Dock Seal and Dock Shelters.

Manufacturer: Vestil, Manufacturer Part Number: D-SVOptional Sloped verticals for Dock Seals and Dock Shelters.

Manufacturer: Vestil, Manufacturer Part Number: D-GSOptional Full Height Guide Strips for a Dock Seal and Dock Shelter.

Manufacturer: Vestil, Manufacturer Part Number: D-APOptional Armor pleats, top 24 (in.) only for Dock Seals and Shelters.

Manufacturer: Vestil, Manufacturer Part Number: D-BBFBottom bun for Dock Seals.

Manufacturer: Vestil, Manufacturer Part Number: CWHF-SMOptional Cold Weather Hydraulic Oil. This oil is priced per gallon.

Manufacturer: Vestil, Manufacturer Part Number: D-18H18 (in.) header for Dock Seals.

Manufacturer: Vestil, Manufacturer Part Number: D-FHPSOptional Full height pleats, standard guide strips twenty-four (24) inch high for Dock Shelter and Dock Seals.

Manufacturer: Vestil, Manufacturer Part Number: EOD-SFOptional steel face for bumper. MFG Part# EOD-SF

Manufacturer: Vestil, Manufacturer Part Number: VWP-48POLYETHYLENE WALL PROTECTOR 48"

Manufacturer: Vestil, Manufacturer Part Number: B-1213-4

Manufacturer: Vestil, Manufacturer Part Number: D-150-16Overall Height: 108", Overall Width: 120", Projection: 16" – Dock Seal – For use with an 8'W x 8'H door. Superior 36 oz. Nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon. Chemically sealed ends prevent moisture infiltration. Full height air escape tunnel. Mounted and bonded on durable wolmanized wood. 2" nylon reinforced guide stripes. Through the wall installation kits included. Three piece construction: top – 12" high; sides – beveled sides with 9–1/2" width at the wall and 12" width at the face. 5" maximum compression is recommended. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. To ensure proper size complete and fax the survey sheet shown on page 8. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-14Overall Height: 126", Overall Width: 114", Projection: 14" – Dock Seal / Shelter Combination – Combines the advantage of low cost and excellent sealing action. Designed for maximum energy savings with long–lasting features. For use with an 8'W x 10'H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run–off. Header measures 114"W with a 30" drop curtain. Side (verticals) measure 120" tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12"W and will taper to 9–1/2" at wall. Verticals are mounted on wooden 2" x 12" to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-18Overall Height: 126", Overall Width: 114", Projection: 18" – Dock Seal / Shelter Combination – Combines the advantage of low cost and excellent sealing action. Designed for maximum energy savings with long–lasting features. For use with an 8'W x 10'H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run–off. Header measures 114"W with a 30" drop curtain. Side (verticals) measure 120" tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12"W and will taper to 9–1/2" at wall. Verticals are mounted on wooden 2" x 12" to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-13Overall Height: 126", Overall Width: 114", Projection: 13" – Dock Seal / Shelter Combination – Combines the advantage of low cost and excellent sealing action. Designed for maximum energy savings with long–lasting features. For use with an 8'W x 10'H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run–off. Header measures 114"W with a 30" drop curtain. Side (verticals) measure 120" tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12"W and will taper to 9–1/2" at wall. Verticals are mounted on wooden 2" x 12" to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-15Overall Height: 126", Overall Width: 114", Projection: 15" – Dock Seal / Shelter Combination – Combines the advantage of low cost and excellent sealing action. Designed for maximum energy savings with long–lasting features. For use with an 8'W x 10'H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run–off. Header measures 114"W with a 30" drop curtain. Side (verticals) measure 120" tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12"W and will taper to 9–1/2" at wall. Verticals are mounted on wooden 2" x 12" to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-16Overall Height: 126", Overall Width: 114", Projection: 16" – Dock Seal / Shelter Combination – Combines the advantage of low cost and excellent sealing action. Designed for maximum energy savings with long–lasting features. For use with an 8'W x 10'H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run–off. Header measures 114"W with a 30" drop curtain. Side (verticals) measure 120" tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12"W and will taper to 9–1/2" at wall. Verticals are mounted on wooden 2" x 12" to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150-19Overall Height: 108", Overall Width: 120", Projection: 19" – Dock Seal – For use with an 8'W x 8'H door. Superior 36 oz. Nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon. Chemically sealed ends prevent moisture infiltration. Full height air escape tunnel. Mounted and bonded on durable wolmanized wood. 2" nylon reinforced guide stripes. Through the wall installation kits included. Three piece construction: top – 12" high; sides – beveled sides with 9–1/2" width at the wall and 12" width at the face. 5" maximum compression is recommended. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. To ensure proper size complete and fax the survey sheet shown on page 8. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150-11Overall Height: 108", Overall Width: 120", Projection: 11" – Dock Seal – For use with an 8'W x 8'H door. Superior 36 oz. Nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon. Chemically sealed ends prevent moisture infiltration. Full height air escape tunnel. Mounted and bonded on durable wolmanized wood. 2" nylon reinforced guide stripes. Through the wall installation kits included. Three piece construction: top – 12" high; sides – beveled sides with 9–1/2" width at the wall and 12" width at the face. 5" maximum compression is recommended. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. To ensure proper size complete and fax the survey sheet shown on page 8. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150-12Overall Height: 108", Overall Width: 120", Projection: 12" – Dock Seal – For use with an 8'W x 8'H door. Superior 36 oz. Nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon. Chemically sealed ends prevent moisture infiltration. Full height air escape tunnel. Mounted and bonded on durable wolmanized wood. 2" nylon reinforced guide stripes. Through the wall installation kits included. Three piece construction: top – 12" high; sides – beveled sides with 9–1/2" width at the wall and 12" width at the face. 5" maximum compression is recommended. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. To ensure proper size complete and fax the survey sheet shown on page 8. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150-13Overall Height: 108", Overall Width: 120", Projection: 13" – Dock Seal – For use with an 8'W x 8'H door. Superior 36 oz. Nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon. Chemically sealed ends prevent moisture infiltration. Full height air escape tunnel. Mounted and bonded on durable wolmanized wood. 2" nylon reinforced guide stripes. Through the wall installation kits included. Three piece construction: top – 12" high; sides – beveled sides with 9–1/2" width at the wall and 12" width at the face. 5" maximum compression is recommended. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. To ensure proper size complete and fax the survey sheet shown on page 8. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150-15Overall Height: 108", Overall Width: 120", Projection: 15" – Dock Seal – For use with an 8'W x 8'H door. Superior 36 oz. Nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon. Chemically sealed ends prevent moisture infiltration. Full height air escape tunnel. Mounted and bonded on durable wolmanized wood. 2" nylon reinforced guide stripes. Through the wall installation kits included. Three piece construction: top – 12" high; sides – beveled sides with 9–1/2" width at the wall and 12" width at the face. 5" maximum compression is recommended. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. To ensure proper size complete and fax the survey sheet shown on page 8. Units are non–returnable.