Best Selling Products

Manufacturer: Haws, Manufacturer Part Number: 8317CTFP Config STD-SVHaws Model 8317CTFP Config STD-SV heat traced combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Virtually eliminating mishaps, the unit's safety features include: thermal actuator bleed valves for scalding and freezing situations, 120V thermostat cable double wrapped piping, 3/4" (1.9 cm) insulation surrounding piping and UV protected outside jacket to prevent freezing, as well as a universal emergency sign. -Perfect for extreme weather conditions dropping down to -30° F (-34.4° C) -Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -Universal design allows for top or bottom water supply -Scald and freeze protect bleed valves help this unit remain viable in all weather situations -Requires minimal maintenance and is equipped with test card to record weekly testing -Reducing installation time, entire unit is pre-built and fully pressure tested -Solid stainless steel pipe stanchion and galvanized fittings make for a sturdy piece of corrosive resistant equipment -Rated Class 1, Div 2, Group B, C & D. Temperature code T6 -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment. Model is QPS-C-US Certified, TYPE 4. (Nema 4 equivalent)

Manufacturer: Haws, Manufacturer Part Number: 8317CTFP.220VHaws Model 8317CTFP.220V heat traced combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Virtually eliminating mishaps, the unit's safety features include: a thermal actuator bleed valve, 220V thermostat cable double wrapped piping, 3/4" (1.9 cm) insulation surrounding piping and UV protected outside jacket to prevent freezing, as well as a universal emergency sign. -Perfect for extreme weather conditions dropping down to -30° F (-34.4° C) -Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -Universal design allows for top or bottom water supply -Requires minimal maintenance and is equipped with test card to record weekly testing -Reducing installation time, entire unit is pre-built and fully pressure tested -Solid stainless steel pipe stanchion and galvanized fittings make for one sturdy piece of corrosive resistant equipment -Rated Class 1, Division 2, Group B, C and D -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment. Model is CSA electrical certified, TYPE 4. (Nema 4 equivalent)

Manufacturer: Haws, Manufacturer Part Number: 8317CTFPHaws Model 8317CTFP heat traced combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Virtually eliminating mishaps, the unit's safety features include: a thermal actuator bleed valve, 120V thermostat cable double wrapped piping, 3/4" (1.9 cm) insulation surrounding piping and UV protected outside jacket to prevent freezing, as well as a universal emergency sign. -Perfect for extreme weather conditions dropping down to -30° F (-34.4° C) -Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -Universal design allows for top or bottom water supply -Requires minimal maintenance and is equipped with test card to record weekly testing -Reducing installation time, entire unit is pre-built and fully pressure tested -Solid stainless steel pipe stanchion and galvanized fittings make for a sturdy piece of corrosive resistant equipment -Rated Class 1, Div 2, Group B, C & D. Temperature code T6 -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment. Model is QPS-C-US Certified, TYPE 4. (Nema 4 equivalent)

Manufacturer: Haws, Manufacturer Part Number: 8315CTFP.8Haws Model 8315CTFP.8 heat traced combination shower and eye/face wash with redundant freeze bleed valve features a unique 3-way valve which reduces the amount of pressurized pipe and non-pressurized standing water, greatly lowering the amount of "dead leg" water in the system resulting in less opportunity for Legionella growth. Also reduced is the packaging foot print allowing for economical and fast UPS shipment. The unit includes the medically acclaimed AXION MSR eye/face wash head assembly. This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Built-in safety features include: porting for an optional thermal actuator bleed valve, 120V thermostat cable double wrapped piping, 1" (2.5 cm) insulation surrounding pressurized piping, and outside jacket to prevent freezing, as well as a universal emergency sign. -Unique 3-way valve design reduces the amount of 'dead leg' water in the system resulting in less opportunity for Legionella growth -"Easy activation, easy return" static handle eliminates free-floating pull handle designs -Reduced packaging size allows for UPS shipment with greatly lowered chance for shipping mishaps -Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -Perfect for extreme weather conditions dropping down to -30° F (-34.4° C) -Electrical system and pressurized plumbing are factory-built and tested -Basic layout is configurable to accept a variety of accessories to suit each specific installation, including thermal actuator bleed valves, drench hose, foot treadle, and re-circulation loop -Galvanized steel pipe and fittings requires minimal maintenance and is equipped with test card to record weekly testing -Rated Class 1, Div 2, Group B, C & D. Temperature code T6. Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment. Model is CSA electrical certified, TYPE 4. (Nema 4 equivalent)

Manufacturer: Haws, Manufacturer Part Number: 8315CTFP.220V.8Haws Model 8315CTFP.220V.8 heat traced combination 220 VAC shower and eye/face wash with redundant freeze bleed valve shall include the 3-way "easy activation, easy return" valve design that provides less 'dead leg' water, reducing the threat of Legionella growth. The compact design also allows for economical, safe and fast shipment via UPS. Also provided is the AXION® MSR hydrodynamic designed green ABS plastic 10-5/8" (26.9 cm) showerhead with integral self-regulating 20 gpm flow control, and AXION MSR eye/face wash head shall feature inverted directional laminar flow which achieves Zero Vertical Velocity™ supplied by an integral 4 gpm flow control. Unit shall also include thermostatically controlled electric heat traced cable protected by 1" (2.5 cm) insulation and an ABS plastic green jacket that prevents freezing down to ambient temperatures of -30° F, powder-coated cast-iron 9" (22.9 cm) diameter floor flange, universal sign, 1-1/4" NPT supply, and rated Class 1, Div 2, Group B, C & D with 1.09 amp max. (For Class 1, Div 1 application, please see the 8317CTFPC1D1) -Unique 3-way valve design reduces the amount of “dead leg” water in the system resulting in less opportunity for Legionella growth -"Easy activation, easy return" static handle eliminates free-floating pull handle designs -Reduced packaging size allows for UPS shipment with greatly lowered chance for shipping mishaps -Perfect for extreme weather conditions dropping down to -30° F (-34.4° C) -Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -Electrical system and pressurized plumbing are factory-built and tested -Basic layout is configurable to accept a variety of accessories to suit each specific installation, including thermal actuator bleed valves, drench hose, foot treadle, and re-circulation loop -Galvanized steel pipe and fittings requires minimal maintenance and is equipped with test card to record weekly testing -Rated Class 1, Div 2, Group B, C & D. Temperature code T6. Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment. Model is CSA electrical certified, TYPE 4. (Nema 4 equivalent)

Manufacturer: Haws, Manufacturer Part Number: 8315CTFP.220VHaws Model 8315CTFP.220V heat traced combination 220 VAC shower and eye/face wash shall include the 3-way "easy activation, easy return" valve design that provides less 'dead leg' water, reducing the threat of Legionella growth. The compact design also allows for economical, safe and fast shipment via UPS. Also provided is the AXION® MSR hydrodynamic designed green ABS plastic 10-5/8" (26.9 cm) showerhead with integral self-regulating 20 gpm flow control, and AXION MSR eye/face wash head shall feature inverted directional laminar flow which achieves Zero Vertical Velocity™ supplied by an integral 4 gpm flow control. Unit shall also include thermostatically controlled electric heat traced cable protected by 1" (2.5 cm) insulation and an ABS plastic green jacket that prevents freezing down to ambient temperatures of -30° F, powder-coated cast-iron 9" (22.9 cm) diameter floor flange, universal sign, 1-1/4" NPT supply, and rated Class 1, Div 2, Group B, C & D with 1.09 amp max. (For Class 1, Div 1 application, please see the 8317CTFPC1D1) -Unique 3-way valve design reduces the amount of “dead leg” water in the system resulting in less opportunity for Legionella growth -"Easy activation, easy return" static handle eliminates free-floating pull handle designs -Reduced packaging size allows for UPS shipment with greatly lowered chance for shipping mishaps -Perfect for extreme weather conditions dropping down to -30° F (-34.4° C) -Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -Electrical system and pressurized plumbing are factory-built and tested -Basic layout is configurable to accept a variety of accessories to suit each specific installation, including thermal actuator bleed valves, drench hose, foot treadle, and re-circulation loop -Galvanized steel pipe and fittings requires minimal maintenance and is equipped with test card to record weekly testing -Rated Class 1, Div 2, Group B, C & D. Temperature code T6. Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment. Model is CSA electrical certified, TYPE 4. (Nema 4 equivalent)

Manufacturer: Haws, Manufacturer Part Number: 8315CTFPHaws Model 8315CTFP heat traced combination shower and eye/face wash features a unique 3-way valve which reduces the amount of pressurized pipe and non-pressurized standing water, greatly lowering the amount of "dead leg" water in the system resulting in less opportunity for Legionella growth. Also reduced is the packaging foot print allowing for economical and fast UPS shipment. The unit includes the medically acclaimed AXION MSR eye/face wash head assembly. This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Built-in safety features include: porting for an optional thermal actuator bleed valve, 120V thermostat cable double wrapped piping, 1" (2.5 cm) insulation surrounding pressurized piping, and outside jacket to prevent freezing, as well as a universal emergency sign. -Unique 3-way valve design reduces the amount of 'dead leg' water in the system resulting in less opportunity for Legionella growth -"Easy activation, easy return" static handle eliminates free-floating pull handle designs -Reduced packaging size allows for UPS shipment with greatly lowered chance for shipping mishaps -Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -Perfect for extreme weather conditions dropping down to -30° F (-34.4° C) -Electrical system and pressurized plumbing are factory-built and tested -Basic layout is configurable to accept a variety of accessories to suit each specific installation, including thermal actuator bleed valves, drench hose, foot treadle, and re-circulation loop -Galvanized steel pipe and fittings requires minimal maintenance and is equipped with test card to record weekly testing -Rated Class 1, Div 2, Group B, C & D. Temperature code T6. Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment. Model is QPS-C-US Certified, TYPE 4. (Nema 4 equivalent)

Manufacturer: Haws, Manufacturer Part Number: 8309WCModel 8309WC barrier-free combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly. This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. -Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -AXION MSR ABS plastic drench showerhead with flow control delivers dispersed flow for uniform drenching -Barrier-free design offers a low profile loop assembly allowing for better wheel chair access as well as a longer pull rod for shower activation -Also features a stainless steel push flag for eyewash activation, a round 11" (27.9 cm) stainless steel bowl, stainless steel pull rod for shower activation, and ball valves with -stainless steel ball and stem for durability -Pipe and fitting: 1-1/4" Schedule 40 hot-dipped galvanized steel. Supply and Waste: 1-1/4" NPT -ANSI/ISEA Z358.1 tempering compliance options -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Manufacturer: Haws, Manufacturer Part Number: 8300CRP-8309CRPModel 8300CRP-8309CRP corrosion resistant combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. -Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -AXION MSR ABS plastic drench showerhead with flow control delivers dispersed flow for uniform drenching -Also features a stainless steel push flag for eyewash activation, stainless steel pull rod for shower activation, a round 11" (27.9 cm) stainless steel bowl, mesh in-line eyewash strainer to collect line debris, and ball valves with stainless steel ball and stem for durability -1-1/4" Schedule 40 hot-dipped galvanized steel piping with green corrosion resistant epoxy coating protects for years of service. Supply and Waste: 1-1/4" NPT -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment. Due to technology advancements these (two models) are now the same.

Manufacturer: Haws, Manufacturer Part Number: 8133HModel 8133H, horizontal overhead safety shower features the AXION MSR hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Outfitted with safety features like a self-regulating shower stream and universal emergency sign, this horizontally designed drench shower is designed for safety. -A great addition to potentially unsafe environments where the body may be exposed to corrosive materials -Requires minimal maintenance and is equipped with test card to record weekly testing -Reduced installation time due to pre-built valve assembly and unit's ability to be mounted horizontally from any wall -Solid construction from Schedule 40 Type 304 Stainless Steel makes for a durable long lasting product -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment

Manufacturer: Haws, Manufacturer Part Number: 8122HWCHaws 8122HWC AXION MSR barrier-free drench shower (patent pending) offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Virtually eliminating mishaps, the unit's safety features include a universal emergency sign and extended 56" (142.2 cm) pull rod for wheelchair accessibility. -A great addition to potentially unsafe environments where the body may be exposed to corrosive materials -AXION MSR ABS plastic drench showerhead with flow control delivers dispersed flow for uniform drenching -Reduced installation time due to pre-built valve assembly and units design to mount horizontally from any wall -Solid construction from Schedule 40 hot-dipped galvanized steel make for a durable long lasting product -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Manufacturer: Haws, Manufacturer Part Number: 8111FPModel 8111FP AXION MSR freeze protected drench shower (patent pending) offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Virtually eliminating mishaps, this unit's safety features include a universal emergency sign, and valve installation that protects unit from freezing. -A great addition to multiple potentially unsafe environments where the body may be exposed to corrosive materials -AXION MSR ABS plastic drench showerhead with flow control delivers dispersed flow for uniform drenching -Requires minimal maintenance and is equipped with test card to record weekly testing -Reducing installation time, valve assembly is pre-built -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Manufacturer: Haws, Manufacturer Part Number: 7778BModel 7778B all stainless steel wall mounted eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, natures ocular cavity drain. Unit is equipped with an in-line 50 x 50 mesh water strainer and yellow plastic eyewash head dust cover, so when debris is present, the irrigation process stays protected. Space efficient stainless steel design and integral wall bracket allow the 7778B to be mounted in a number of easily accessible locations. -A great addition to multiple unsafe environments where the eyes and face may be exposed to corrosive materials -Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -Easily detected and maintained, emergency equipment is equipped with safety sign and test card to record weekly testing -Reducing installation time, eye/face wash and valve assembly is pre-built and fully water/pressure tested -Type 304 Stainless Steel construction with a Type 316 Stainless Steel ball valve -ANSI/ISEA Z358.1 tempering complianceoptions -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment

Manufacturer: Haws, Manufacturer Part Number: 7655WCSMModel 7655WCSM wheelchair accessible surface mounted eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). The revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. -Wall mount combination strobe light and alarm horn special available -Perfect for mounting on block or solid walls which cannot be cut into -Eye/face wash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -Easy access exterior mounted in-line strainer -18 Gauge Type 304 Stainless Steel recessed cabinet is a deep-drawn heavy duty structure with smooth electro-polished finish -The eye/face wash head is easily activated by the emergency equipment's pull-down design -ANSI/ISEA Z358.1 tempering compliance options -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Manufacturer: Haws, Manufacturer Part Number: 7655WCCModel 7655WCC barrier-free eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). The revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. -Wall mount combination strobe light and alarm horn special available -Easy access exterior mounted in-line strainer Eye/face wash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -18 Gauge Type 304 Stainless Steel recessed cabinet is a deep-drawn heavy duty structure with smooth electro-polished finish -The eye/face wash head is easily activated by the emergency equipment's pull-down design -ANSI/ISEA Z358.1 tempering compliance options -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Manufacturer: Haws, Manufacturer Part Number: 7612LHModel 7612LH sink or deck mounted eye/face wash features the medically acclaimed AXION MSR stainless steel eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. When not in use, this unit utilizes a swing-away feature so the area stays clear for everyday use. -A dust cover allows the 7612LH to stay protected from debris when not in use -Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -Requires minimal maintenance and is equipped with test card to record weekly testing -Counter top mounted on the left side of a sink -ANSI/ISEA Z358.1 tempering complianceoptions -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment

Manufacturer: Haws, Manufacturer Part Number: 7610SThe Haws 7610S ADA accessible wall or deck mount pull down eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. -Unit can be deck or wall mounted with easy change-over instructions -Eye/face wash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -Dust cover allows for the 7610S to stay protected from debris when not in use -Wheelchair accessible when properly installed -Activation and deactivation occur at a 30-degree angle from horizontal limiting splash of water onto counter or wall -Rear mount design allows the sink to remain open to other uses -ANSI/ISEA Z358.1 tempering compliance options -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Manufacturer: Haws, Manufacturer Part Number: 7433FPHaws emergency eyewash systems, like the freeze protected 7433FP, use anti-surge Soft-Flo heads that activate with the push of a stainless steel flag. Heads come equipped with pop-off dust covers, so when debris is present, the irrigation process stays protected. Space efficient design and integral wall bracket allow the 7433FP to be mounted in a number of easily accessible locations. -A great addition to multiple unsafe environments where the eyes may be exposed to corrosive materials -Easily detected and maintained, emergency equipment is equipped with safety sign and test card to record weekly testing -Reducing installation time, eyewash and valve assembly is pre-built and fully water/pressure tested -Fully functional in freezing environments when installed properly -All unused water drains out of the unit through a drain valve behind the wall -Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment

Manufacturer: Haws, Manufacturer Part Number: 7361-7461Model 7361-7461 pedestal mounted eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. -Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -Features a round 11" (27.9 cm) stainless steel receptor and 1-1/4" NPT galvanized stanchion -Includes a mesh in-line strainer to collect line debris, and ball valve with stainless steel ball and stem for durability -Supply: 1/2" NPT. Waste: 1- 1/4" NPT -ANSI/ISEA Z358.1 tempering complianceoptions -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment. Due to technology advancements these (two models) are now the same.

Manufacturer: Haws, Manufacturer Part Number: 7360BTWCThe Haws 7360BTWC barrier-free emergency eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. Unit is equipped with an in-line 50 x 50 mesh water strainer and flip top dust covers, so when debris is present, the irrigation process stays protected. Space efficient design allows the 7360BTWC to be mounted in a number of easily accessible locations while providing a barrier-free standard. -Low profile design accommodates wheelchair access -Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -Reducing installation time, eye/face wash and valve assembly is pre-built and fully water/pressure tested. Unit also comes with trap and tailpiece to meet desired wall mounting requirements -ANSI/ISEA Z358.1 tempering compliance options Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Manufacturer: Haws, Manufacturer Part Number: 7360BT-7460BTModel 7360BT-7460BT wall mounted eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. -Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -Features a round 11" (27.9 cm) stainless steel receptor, aluminum wall bracket and tailpiece and trap -Includes a mesh in-line strainer to collect line debris, and ball valve with stainless steel ball and stem for durability -Supply: 1/2" NPT. Waste: 1- 1/2" NPT -ANSI/ISEA Z358.1 tempering compliance options -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment. Due to technology advancements these (two models) are now the same.

Manufacturer: Haws, Manufacturer Part Number: 7360B-7460BModel 7360B-7460B wall mounted, eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. -Eyewash streams provide Zero Vertical Velocity™ engineering with even laminar flow for enhanced comfort, stability and effectiveness -Features a round 11" (27.9 cm) stainless steel receptor and aluminum wall bracket for long life -Includes a mesh in-line strainer to collect line debris, and ball valve with stainless steel ball and stem for durability -Supply: 1/2" NPT. Waste: 1- 1/4" NPT -ANSI/ISEA Z358.1 tempering compliance options -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment. Due to technology advancements these (two models) are now the same.

Manufacturer: Haws, Manufacturer Part Number: 8330Haws Model 8330 Type 304 Stainless Steel combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eye washes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. The combination unit is equipped with an in-line 50 x 50 mesh water strainer and eyewash dust cover to keep the irrigation process protected. A great addition to unsafe environments where the eyes, face, and body may be exposed to corrosive materials. -Features an 11" (27.9 cm) bowl and 9" (22.9 cm) floor flange -Eye/face wash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -Requires minimal maintenance and is equipped with test card to record weekly testing -AXION MSR drench showerhead with flow control delivers dispersed flow for uniform drenching -Reducing installation time, eyewash and valve assembly is pre-built and fully water/pressure tested -Solid 1-1/4" stainless steel construction makes for a sturdy piece of corrosive resistant equipment -Provided with universal emergency sign and high-visibility stripe -Supply and Waste: 1-1/4" NPT -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Manufacturer: Haws, Manufacturer Part Number: 8300.158AXION® MSR Emergency Shower and Eyewash The Haws 8300.158 combines the use of a hydrodynamic ABS showerhead and anti-surge Soft-Flo eyewash heads for the irrigation process. Virtually eliminating mishaps, the unit's safety features include: pop-off eyewash dust covers, universal emergency sign, high visibility stripe, and a thermal actuator bleed valve to protect from temporary internal freezing. -Hydrodynamic ABS plastic drench showerhead with flow control delivers dispersed flow for uniform drenching -A great addition to unsafe environments where the eyes and body may be exposed to corrosive materials -Requires minimal maintenance and is equipped with test card to record weekly testing -Reducing installation time, eyewash and valve assembly is pre-built and fully water/pressure tested -Solid galvanized steel construction make for one sturdy piece of emergency equipment -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment