Best Selling Products

Manufacturer: Peabody Engineering, Manufacturer Part Number : 02-36111It’s The NEW Gemini Pump Pup Platform™, an elevated mounting base for Chemical Feed Pumps that installs on any tank with a 2” Female top threaded connection. The pump deck has a polyethylene mounting base that attaches to the deck with (4) ¼-20 threaded connections that will accept any Chemical Feed Pump that fits on the 9” x 15” Deck. The pump suction can be installed so the suction tubing travels through a water-tight chem-resistant grommet and down through the 2” threaded connection pipe into the tank, where the user can install a ball foot valve or combine it with a Gemini Suction Tube assembly for a secure and reliable pump installation on any tank.

Manufacturer: Peabody Engineering, Manufacturer Part Number : 02-36110It’s The NEW Gemini Pump Pup Platform™, an elevated mounting base for Chemical Feed Pumps that installs on any tank with a 2” Female top threaded connection. The pump deck has a polyethylene mounting base that attaches to the deck with (4) ¼-20 threaded connections that will accept any Chemical Feed Pump that fits on the 9” x 15” Deck. The pump suction can be installed so the suction tubing travels through a water-tight chem-resistant grommet and down through the 2” threaded connection pipe into the tank, where the user can install a ball foot valve or combine it with a Gemini Suction Tube assembly for a secure and reliable pump installation on any tank.

Manufacturer: Morse, Manufacturer Part Number: 520SS-114Specific to Model 520SS-114 -Model 520SS-114 has AIR power drum lift and tilt -On/Off valve and lift valve raise drum -Second valve controls hydraulically-driven drum tilt -Manual release valve lowers drum -Frame is made of type 304 Stainless Steel with bead blast finish -Dump drum at up to 106" (269 cm) high -NOT for use in hazardous areas

Manufacturer: Morse, Manufacturer Part Number: 510SS-125Specific to Model 510SS-125 -Model 510SS-125 has 12V battery DC power lift, and hand crank manual drum tilt. Includes battery and charger. -Operate battery power controls to raise and lower drum -Hand Crank controlled drum tilt -Frame made of type 304 Stainless Steel with bead blast finish -Dispense drum at up to 60" (152 cm) high -NOT for use in hazardous areas -We recommend the MORStopTM Tilt-Brake Option to automatically lock drum tilt angle

Manufacturer: Morse, Manufacturer Part Number: 510SS-124Specific to Model 510SS-124 -Model 510SS-124 has AIR power drum lift, and hand crank manual drum tilt -On/Off valve raises drum -Hand Crank controlled drum tilt -Manual release valve lowers drum -Dispense drum at up to 60" (152 cm) high -NOT for use in hazardous areas -We recommend the MORStopTM Tilt-Brake Option to automatically lock drum tilt angle

Manufacturer: Morse, Manufacturer Part Number: 510SS-120Specific to Model 510SS-120 -Model 510SS-120 has 1 HP single-phase 115V 60Hz AC motor for power drum lift, and hand crank manual drum tilt -Hold momentary switch to raise drum -Hand Crank controlled drum tilt -Manual release valve lowers drum -Frame is made of type 304 Stainless Steel with bead blast finish -Dispense drum at up to 60" (152 cm) high -NOT for use in hazardous areas -We recommend the MORStopTM Tilt-Brake Option to automatically lock drum tilt angle

Manufacturer: Morse, Manufacturer Part Number: 510SS-115Specific to Model 510SS-115 -Model 510SS-115 has 12V battery DC power drum lift and tilt -Hold momentary switch and lift valve to raise drum -Second valve controls hydraulically-driven drum tilt -Manual release valve lowers drum -Frame is made of type 304 Stainless Steel with bead blast finish -Dispense drum at up to 60" (152 cm) high -NOT for use in hazardous areas -Includes battery and charger

Manufacturer: Krueger Sentry, Manufacturer Part Number: 420SGT The new KSG Smart Gauge transmitter is a Remote Ready Accessory. Add this to any of our mechanical gauges, and you will get a digital output (4/20mA) that you can tie into any electronic equipment you may have that can read this industry standard signal. This is a very affordable way to turn our reliable mechanical gauge into a digital gauge. -Communicates with electronic devices: cellular, computer, etc. -Monitor tank levels without being on site -Works with the following gauges: At a glance type D, Therma Type H, Barrel Type B, Overfill Alert, Leak Detection -Accessory only – gauge not included

Manufacturer: Haws, Manufacturer Part Number: 9202E Model 9202E Emergency Valve (patent pending) thermostatically mixes hot and cold water to provide a safe fluid supply for emergency showers and eyewash equipment. Additionally, to ensure a fail-safe water supply for emergency shower and eyewash stations, a series of cold water by-pass valves open in the event of hot water pressure loss. (No gauges supplied - ASSE 1071 standard recommends gauges be placed 5 to 8 feet (1.52 to 2.44 m) downstream for the most accurate measurement.) -Optional recessed or surface mounted valve box available -A flow rate of 1 to 78 gpm (295 L) for better temperature control across the operating range -Lowest internal pressure drop for this class of valve (advantage where supply pressure is low) -Wax based thermostat technology for fast response time with proven highly reliable temperature control -Highest Cold Water Bypass flow rate in the industry (64% of rated tepid flow rate) -Brass valve design with internal check stops -Over-sized valve seats resist failures caused by foreign matter -A new and efficient shuttle design eliminates valve sticking -A custom funnel design improves temperature control at low flow rates -Outlet temperature is factory set to 85° F (29° C) -Tempered water: High temperature limit is factory set to 90° F (32° C) -Cold water by-pass valves are closed during normal operation, regardless of flow rate -For important installation information, please read Scald Warning. -CSA Listings: CSA certified per ASSE 1071, ANSI Z358.1 and applicable sections of CSA B125.3.

Manufacturer: Haws, Manufacturer Part Number: 9201HModel 9201H, low-lead Emergency Valve (patent pending), thermostatically mixes hot and cold water to provide a safe fluid supply for emergency showers and eyewash equipment. The valve contains a secondary high temperature limit valve to provide additional protection to the user in the event of main tempering valve malfunction. Additionally, to ensure a fail-safe water supply for emergency shower and eyewash stations, a series of cold water by-pass valves open in the event of hot water pressure loss. (No gauges supplied - ASSE 1071 standard recommends gauges be placed 5 to 8 feet downstream for the most accurate measurement.) -Optional recessed or surface mounted valve box available -A flow rate of 1 to 31 gpm (3.8 to 117.3 L) for better temperature control across the operating range -AXION's superior design and technology provide a complete safety solution for increased victim comfort -Lowest internal pressure drop for this class of valve (advantage where supply pressure is low) -Wax based thermostat technology for fast response time with proven highly reliable temperature control Highest Cold Water Bypass flow rate in the industry (65% of rated tepid flow rate) -Low-lead brass valve design with internal check stops -Oversized valve seats resist failures caused by foreign matter -A new and efficient shuttle design eliminates valve sticking -A custom funnel design improves temperature control at low flow rates -Outlet temperature is factory set to 85° F (29° C) -Tempered water: High temperature limit is factory set to 87° F (30° C) -Cold water by-pass valves are closed during normal operation, regardless of flow rate -Listings: CSA certified per ASSE 1071, ANSI Z358.1, applicable sections of CSA B125.3, NSF/ANSI 372, NSF/ANSI 61-section 8, California Health and Safety Code 116875 (AB 1953).

Manufacturer: Haws, Manufacturer Part Number: 9201EW Model 9201EW Emergency Valve thermostatically mixes hot and cold water to provide a safe fluid supply for a single emergency eye/face wash. Additionally, to ensure a fail-safe water supply for emergency eyewash stations, a cold water by-pass valves open in the event of hot water pressure loss. (No gauges supplied - ASSE 1071 standard recommends gauges be placed 5 to 8 feet (1.52 to 2.44 m) downstream for the most accurate temperature measurement.) -A flow rate of 1 to 10 gpm (3.8 to 37.8 L) for better temperature control across the operating range -AXION's superior design and technology provide a complete safety solution for increased victim comfort. -Wax based thermostat technology for fast response time with proven highly reliable temperature control -Cold Water Bypass flow rate of 3.8 gpm (14.4 L) (When tested under conditions specified in ASSE 1071) -Brass valve design with supplied check valves -Over-sized valve seats resist failures caused by foreign matter -Efficient funnel design improves temperature control at low flow rates -Outlet temperature is factory set to 85° F (29° C). -Tempered water: High temperature limit is factory set to 90° F (32° C). -For important installation information, please read Scald Warning. -CSA Listings: CSA certified per ASSE 1071, ANSI/ISEA Z358.1, NSF/ANSI/CAN 372, and applicable sections of CSA B125.3.

Manufacturer: Haws, Manufacturer Part Number: 9201EFE Model 9201EFE Emergency Thermostatic Mixing Valve (patent pending) thermostatically mixes hot and cold water to provide a safe fluid supply for emergency eyewash equipment. Additionally, to ensure a fail-safe water supply for emergency eyewash stations, a series of cold water by-pass valves open in the event of hot water pressure loss. (No gauges supplied - ASSE 1071 standard recommends gauges be placed 5 to 8 feet (1.52 to 2.44 m) downstream for the most accurate temperature measurement.) -Optional recessed or surface mounted valve box available -A flow rate of 1 to 12 gpm (3.8 to 45.4 L) for better temperature control across the operating range -AXION's superior design and technology provide a complete safety solution for increased victim comfort -Lowest internal pressure drop for this class of valve (advantage where supply pressure is low) -Wax based thermostat technology for fast response time with proven highly reliable temperature control -Highest Cold Water Bypass flow rate in the industry (83% of rated tepid flow rate) -Brass valve design with internal check stops -Over-sized valve seats resist failures caused by foreign matter -A new and efficient shuttle design eliminates Thermostatic Mixing Valve sticking -A custom funnel design improves temperature control at low flow rates -Outlet temperature is factory set to 85° F (29° C) -Tempered water: High temperature limit is factory set to 90° F (32° C) -Cold water by-pass valves are closed during normal operation, regardless of flow rate -For important installation information, please read Scald Warning. -CSA Listings: CSA certified per ASSE 1071, ANSI/ISEA Z358.1 and applicable sections of CSA B125.3.

Manufacturer: Haws, Manufacturer Part Number: 9201E Model 9201E emergency mixing valve (patent pending) thermostatically mixes hot and cold water to provide a safe fluid supply for emergency showers and eyewash equipment. Additionally, to ensure a fail-safe water supply for emergency shower and eyewash stations, a series of cold water by-pass valves open in the event of hot water pressure loss. (No gauges supplied - ASSE 1071 standard recommends gauges be placed 5 to 8 feet (1.52 to 2.44 m) downstream for the most accurate temperature measurement.) -Optional recessed or surface mounted valve box available -A flow rate of 1 to 31 gpm (3.8 to 117.3 L) for better temperature control across the operating range -AXION's superior design and technology provide a complete safety solution for increased victim comfort -Lowest internal pressure drop for this class of valve (advantage where supply pressure is low) -Wax based thermostat technology for fast response time with proven highly reliable temperature control -Highest Cold Water Bypass flow rate in the industry (65% of rated tepid flow rate) -Brass valve design with internal check stops -Over-sized valve seats resist failures caused by foreign matter -A new and efficient shuttle design eliminates valve sticking -A custom funnel design improves temperature control at low flow rates -Outlet temperature is factory set to 85° F (29° C) -Tempered water: High temperature limit is factory set to 90° F (32° C) -Cold water by-pass valves are closed during normal operation, regardless of flow rate -For important installation information, please read Scald Warning. -CSA Listings: CSA certified per ASSE 1071, ANSI Z358.1, and applicable sections of CSA B125.3.

Manufacturer: Haws, Manufacturer Part Number: 8901RFKModel 8901RFK body spray features a ABS plastic head, stay-open squeeze lever valve, 8 foot (243.8 cm) hose and installation kit. Kit includes clamp hook-up, tee clips and fitting for retrofit installation on most combination shower and eyewash units. Supply: 1/2" IPS. In order to comply with state codes the use of a vacuum breaker is required with all hand held body spray units (Haws offers model SP212) Per ANSI/ISEA Z358.1, "Hand held drench hoses provide support for emergency shower and eyewash units, but shall not replace them."

Manufacturer: Haws, Manufacturer Part Number: 8901BModel 8901B drench hose can be easily activated with integral squeeze lever, providing a maximum coverage area for the body with its soft flowing streams of water. Unit is conveniently mounted using wall clips keeping the emergency equipment held firmly against the wall. -Dust cover allows for the spray head to stay protected from debris when not in use -Requires minimal maintenance and is equipped with test card to record weekly testing -8 foot (243.8 cm) swivel hose provides an extended coverage area to further optimize the irrigation process -In order to comply with state codes the use of a vacuum breaker is required with all hand held body spray units (Haws offers model SP212) -Per ANSI/ISEA Z358.1, "Hand held drench hoses provide support for emergency shower and eyewash units, but shall not replace them."

Manufacturer: Haws, Manufacturer Part Number: 8356WCWModel 8356WCW barrier-free, wall-mounted, fully recessed combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). The revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eye washes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Emergency combination unit is equipped with a stainless steel drain pan, so when the irrigation process begins, the unit is draining waste properly. -Wall mount combination strobe light and alarm horn special available -Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -Hydrodynamic designed stainless steel wall mounted showerhead -Easy access exterior mounted in-line strainer -One piece drain tray catches waste fluid during eyewash use -18 Gauge Type 304 Stainless Steel recessed cabinet is a deep-drawn heavy duty structure with smooth electro-polished finish -Reducing installation time, eyewash and valve assembly are pre-built and fully water/pressure tested -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Manufacturer: Haws, Manufacturer Part Number: 8356WCSM Model 8356WCSM wheelchair accessible surface mounted combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). The revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eye washes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. Emergency combination unit is equipped with a stainless steel drain pan, so when the irrigation process begins, the unit is draining waste properly. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. -Wall mount combination strobe light and alarm horn special available -Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -Perfect for mounting on block or solid walls which cannot be cut into -Easy access exterior mounted in-line strainer -One piece drain tray catches waste fluid during eyewash use -18 Gauge Type 304 Stainless Steel recessed cabinet is a deep-drawn heavy duty structure with smooth electro-polished finish -Reducing installation time, eyewash and valve assembly are pre-built and fully water/pressure tested -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Manufacturer: Haws, Manufacturer Part Number: 8356WCDDModel 8356WCDD barrier-free, wall-mounted, fully recessed combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). The revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eye washes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. Emergency combination unit is equipped with a stainless steel drain pan, so when the irrigation process begins, the unit is draining waste properly. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. -Wall mount combination strobe light and alarm horn special available -Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -Flexible design of the shower allows for flush in the ceiling mounting, or to hang down from the ceiling -One piece drain tray catches waste fluid during eyewash use -Easy access exterior mounted in-line strainer -18 Gauge Type 304 Stainless Steel recessed cabinet is a deep-drawn heavy duty structure with smooth electro-polished finish -Daylight drain feature allows for installation where in-wall drainage is not available -Reducing installation time, eyewash and valve assembly are pre-built and fully water/pressure tested -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Manufacturer: Haws, Manufacturer Part Number: 8356WCC Model 8356WCC barrier-free, wall-mounted, fully recessed combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). The revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eye washes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. Emergency combination unit is equipped with a stainless steel drain pan, so when the irrigation process begins, the unit is draining waste properly. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. -Wall mount combination strobe light and alarm horn special available -Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -Flexible design of the shower allows for flush in the ceiling mounting, or to hang down from the ceiling -Easy access exterior mounted in-line strainer -One piece drain tray catches waste fluid during eyewash use -18 Gauge Type 304 Stainless Steel recessed cabinet is a deep-drawn heavy duty structure with smooth electro-polished finish -Reducing installation time, eyewash and valve assembly are pre-built and fully water/pressure tested -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Manufacturer: Haws, Manufacturer Part Number: 8355WCWModel 8355WCW barrier-free, wall-mounted, fully recessed combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). The revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eye washes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. -Wall mount combination strobe light and alarm horn special available -Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -Easy access exterior mounted in-line strainer -18 Gauge Type 304 Stainless Steel recessed cabinet is a deep-drawn heavy duty structure with a smooth electro-polished finish -Reducing installation time, eyewash and valve assembly are pre-built and fully water/pressure tested -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Manufacturer: Haws, Manufacturer Part Number: 8355WCCModel 8355WCC barrier-free, wall-mounted, fully recessed combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). The revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eye washes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. -Wall mount combination strobe light and alarm horn special available -Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -Flexible design of the shower allows for flush in the ceiling mounting, or to hang down from the ceiling -Easy access exterior mounted in-line strainer -18 Gauge Type 304 Stainless Steel recessed cabinet is a deep-drawn heavy duty structure with a smooth electro-polished finish -Reducing installation time, eyewash and valve assembly are pre-built and fully water/pressure tested -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Manufacturer: Haws, Manufacturer Part Number: 8320CRP Model 8320CRP corrosion resistant combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. -Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -AXION MSR ABS plastic drench showerhead with flow control delivers dispersed flow for uniform drenching -Also features a stainless steel push flag for eyewash activation, stainless steel pull rod for shower activation, mesh in-line eyewash strainer to collect line debris, and ball valves -with stainless steel ball and stem for durability -Pipe and fitting: 1-1/4" Schedule 40 hot-dipped galvanized steel with green corrosion resistant epoxy coating. Supply and Waste: 1-1/4" IPS -ANSI/ISEA Z358.1 tempering compliance options -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Manufacturer: Haws, Manufacturer Part Number: 8320-8325Model 8320-8325 combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal shower heads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. -Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -AXION MSR ABS plastic drench showerhead with flow control delivers dispersed flow for uniform drenching -Also features a stainless steel push flag for eyewash activation, stainless steel pull rod for shower activation, mesh in-line eyewash strainer to collect line debris, and ball valves with stainless steel ball and stem for durability -Pipe and fitting: 1-1/4" Schedule 40 hot-dipped galvanized steel. Supply and Waste: 1-1/4" NPT -ANSI/ISEA Z358.1 tempering compliance options -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment. Due to technology advancements these (two models) are now the same.

Manufacturer: Haws, Manufacturer Part Number: 8317CTFPC1D1Haws Model 8317CTFPC1D1 heat traced combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Virtually eliminating mishaps, the unit's safety features include: a thermal actuator bleed valve, 120V thermostat cable double wrapped piping, 3/4" (1.9 cm) insulation surrounding piping and UV protected outside jacket to prevent freezing, as well as a universal emergency sign. -Perfect for extreme weather conditions dropping down to -30° F (-34.4° C) -Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -Universal design allows for top or bottom water supply -Requires minimal maintenance and is equipped with test card to record weekly testing -Reducing installation time, entire unit is pre-built and fully pressure tested -Solid stainless steel pipe stanchion and galvanized fittings make for one sturdy piece of corrosive resistant equipment -Rated Class 1, Div 1, Group B, C & D. Tempering code T6 -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment. Model is CSA electrical certified.